/*
* Fill.
*/
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "DRAM fill: 0x%08lx-0x%08lx\n", start, stop);
#else
print_debug("DRAM fill: ");
for(addr = start; addr < stop ; addr += 4) {
/* Display address being filled */
if (!(addr & 0xfffff)) {
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx \r", addr);
#else
print_debug_hex32(addr);
write_phys(addr, (u32)addr);
};
/* Display final address */
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx\nDRAM filled\n", addr);
#else
print_debug_hex32(addr);
/*
* Verify.
*/
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "DRAM verify: 0x%08lx-0x%08lx\n", start, stop);
#else
print_debug("DRAM verify: ");
unsigned long value;
/* Display address being tested */
if (!(addr & 0xfffff)) {
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx \r", addr);
#else
print_debug_hex32(addr);
value = read_phys(addr);
if (value != addr) {
/* Display address with error */
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_ERR, "Fail: @0x%08lx Read value=0x%08lx\n", addr, value);
#else
print_err("Fail: @0x");
#endif
i++;
if(i>256) {
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Aborting.\n");
#else
print_debug("Aborting.\n");
}
}
/* Display final address */
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx", addr);
#else
print_debug_hex32(addr);
#endif
if (i) {
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\nDRAM did _NOT_ verify!\n");
#else
print_debug("\nDRAM did _NOT_ verify!\n");
die("DRAM ERROR");
}
else {
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\nDRAM range verified.\n");
#else
print_debug("\nDRAM range verified.\n");
* test than a "Is my DRAM faulty?" test. Not all bits
* are tested. -Tyson
*/
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Testing DRAM : %08lx - %08lx\n", start, stop);
#else
print_debug("Testing DRAM : ");
/* Make sure we don't read before we wrote */
phys_memory_barrier();
ram_verify(start, stop);
-#if CONFIG_USE_PRINTK_IN_CAR
+#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Done.\n");
#else
print_debug("Done.\n");