Be sure to add "void" to all function prototypes that take no args.

[seabios.git] / src / ata.h

diff --git a/src/ata.h b/src/ata.h
index 6c8437af4e11172861e2d285d83d476f2aac9958..df53a01e6a32979d4bdd3347ced0a76fa83447be 100644 (file)
--- a/src/ata.h
+++ b/src/ata.h
@@ -1,14 +1,27 @@
-#include "types.h" // u16
-
-// Function definitions
-void ata_reset(u16 device);
-u16 ata_cmd_data_in(u16 device, u16 command, u16 count, u16 cylinder
-                    , u16 head, u16 sector, u32 lba, u16 segment, u16 offset);
-u16 ata_cmd_data_out(u16 device, u16 command, u16 count, u16 cylinder
-                     , u16 head, u16 sector, u32 lba, u16 segment, u16 offset);
-u16 ata_cmd_packet(u16 device, u8 cmdlen, u16 cmdseg, u16 cmdoff, u16 header
-                   , u32 length, u8 inout, u16 bufseg, u16 bufoff);
-void ata_detect();
+#ifndef __ATA_H
+#define __ATA_H
+
+#include "types.h" // u8
+#include "config.h" // CONFIG_MAX_ATA_INTERFACES
+
+struct ata_channel_s {
+    u16 iobase1;
+    u16 iobase2;
+    u16 iomaster;
+    u8  irq;
+    int pci_bdf;
+};
+
+// ata.c
+extern struct ata_channel_s ATA_channels[CONFIG_MAX_ATA_INTERFACES];
+int cdrom_read(struct disk_op_s *op);
+int ata_cmd_packet(struct drive_s *drive_g, u8 *cmdbuf, u8 cmdlen
+                   , u32 length, void *buf_fl);
+void ata_setup(void);
+int process_ata_op(struct disk_op_s *op);
+int process_atapi_op(struct disk_op_s *op);
+void describe_ata(struct drive_s *drive_g);
+void describe_atapi(struct drive_s *drive_g);
 
 // Global defines -- ATA register and register bits.
 // command block & control block regs
@@ -22,9 +35,10 @@ void ata_detect();
 #define ATA_CB_DH    6   // device head      in/out pio_base_addr1+6
 #define ATA_CB_STAT  7   // primary status   in     pio_base_addr1+7
 #define ATA_CB_CMD   7   // command             out pio_base_addr1+7
-#define ATA_CB_ASTAT 6   // alternate status in     pio_base_addr2+6
-#define ATA_CB_DC    6   // device control      out pio_base_addr2+6
-#define ATA_CB_DA    7   // device address   in     pio_base_addr2+7
+
+#define ATA_CB_ASTAT 2   // alternate status in     pio_base_addr2+2
+#define ATA_CB_DC    2   // device control      out pio_base_addr2+2
+#define ATA_CB_DA    3   // device address   in     pio_base_addr2+3
 
 #define ATA_CB_ER_ICRC 0x80    // ATA Ultra DMA bad CRC
 #define ATA_CB_ER_BBK  0x80    // ATA bad block
@@ -84,7 +98,6 @@ void ata_detect();
 #define ATA_CMD_FLUSH_CACHE                  0xE7
 #define ATA_CMD_FORMAT_TRACK                 0x50
 #define ATA_CMD_IDENTIFY_DEVICE              0xEC
-#define ATA_CMD_IDENTIFY_DEVICE_PACKET       0xA1
 #define ATA_CMD_IDENTIFY_PACKET_DEVICE       0xA1
 #define ATA_CMD_IDLE1                        0xE3
 #define ATA_CMD_IDLE2                        0x97
@@ -96,14 +109,24 @@ void ata_detect();
 #define ATA_CMD_PACKET                       0xA0
 #define ATA_CMD_READ_BUFFER                  0xE4
 #define ATA_CMD_READ_DMA                     0xC8
+#define ATA_CMD_READ_DMA_EXT                 0x25
 #define ATA_CMD_READ_DMA_QUEUED              0xC7
+#define ATA_CMD_READ_DMA_QUEUED_EXT          0x26
+#define ATA_CMD_READ_LOG_EXT                 0x2F
 #define ATA_CMD_READ_MULTIPLE                0xC4
+#define ATA_CMD_READ_MULTIPLE_EXT            0x29
+#define ATA_CMD_READ_NATIVE_MAX_ADDRESS      0xF8
+#define ATA_CMD_READ_NATIVE_MAX_ADDRESS_EXT  0x27
 #define ATA_CMD_READ_SECTORS                 0x20
+#define ATA_CMD_READ_SECTORS_EXT             0x24
 #define ATA_CMD_READ_VERIFY_SECTORS          0x40
+#define ATA_CMD_READ_VERIFY_SECTORS_EXT      0x42
 #define ATA_CMD_RECALIBRATE                  0x10
 #define ATA_CMD_REQUEST_SENSE                0x03
 #define ATA_CMD_SEEK                         0x70
 #define ATA_CMD_SET_FEATURES                 0xEF
+#define ATA_CMD_SET_MAX                      0xF9
+#define ATA_CMD_SET_MAX_ADDRESS_EXT          0x37
 #define ATA_CMD_SET_MULTIPLE_MODE            0xC6
 #define ATA_CMD_SLEEP1                       0xE6
 #define ATA_CMD_SLEEP2                       0x99
@@ -113,37 +136,14 @@ void ata_detect();
 #define ATA_CMD_STANDBY_IMMEDIATE2           0x94
 #define ATA_CMD_WRITE_BUFFER                 0xE8
 #define ATA_CMD_WRITE_DMA                    0xCA
+#define ATA_CMD_WRITE_DMA_EXT                0x35
 #define ATA_CMD_WRITE_DMA_QUEUED             0xCC
+#define ATA_CMD_WRITE_DMA_QUEUED_EXT         0x36
+#define ATA_CMD_WRITE_LOG_EXT                0x3F
 #define ATA_CMD_WRITE_MULTIPLE               0xC5
+#define ATA_CMD_WRITE_MULTIPLE_EXT           0x39
 #define ATA_CMD_WRITE_SECTORS                0x30
+#define ATA_CMD_WRITE_SECTORS_EXT            0x34
 #define ATA_CMD_WRITE_VERIFY                 0x3C
 
-#define ATA_IFACE_NONE    0x00
-#define ATA_IFACE_ISA     0x00
-#define ATA_IFACE_PCI     0x01
-
-#define ATA_TYPE_NONE     0x00
-#define ATA_TYPE_UNKNOWN  0x01
-#define ATA_TYPE_ATA      0x02
-#define ATA_TYPE_ATAPI    0x03
-
-#define ATA_DEVICE_NONE  0x00
-#define ATA_DEVICE_HD    0xFF
-#define ATA_DEVICE_CDROM 0x05
-
-#define ATA_MODE_NONE    0x00
-#define ATA_MODE_PIO16   0x00
-#define ATA_MODE_PIO32   0x01
-#define ATA_MODE_ISADMA  0x02
-#define ATA_MODE_PCIDMA  0x03
-#define ATA_MODE_USEIRQ  0x10
-
-#define ATA_TRANSLATION_NONE  0
-#define ATA_TRANSLATION_LBA   1
-#define ATA_TRANSLATION_LARGE 2
-#define ATA_TRANSLATION_RECHS 3
-
-#define ATA_DATA_NO      0x00
-#define ATA_DATA_IN      0x01
-#define ATA_DATA_OUT     0x02
-
+#endif // ata.h