use IEEE.numeric_std.all;
use work.common_pkg.all;
+use work.extension_pkg.all;
package core_pkg is
--System inputs
clk : in std_logic;
reset : in std_logic;
-
+
--Data inputs
jump_result : in instruction_addr_t;
prediction_result : in instruction_addr_t;
branch_prediction_bit : in std_logic;
alu_jump_bit : in std_logic;
+ int_req : in interrupt_t;
--Data outputs
- instruction : out instruction_word_t
-
+ instruction : out instruction_word_t;
+ prog_cnt : out instruction_addr_t
);
end component fetch_stage;
--Data inputs
instruction : in instruction_word_t;
+ prog_cnt : in instruction_addr_t;
reg_w_addr : in std_logic_vector(REG_ADDR_WIDTH-1 downto 0);
reg_wr_data : in gp_register_t;
reg_we : in std_logic;
+ nop : in std_logic;
--Data outputs
-- reg1_rd_data : out gp_register_t;
-- reg2_rd_data : out gp_register_t;
branch_prediction_res : out instruction_word_t;
branch_prediction_bit : out std_logic;
+
to_next_stage : out dec_op
);
end component decode_stage;
end component decoder;
component execute_stage is
+
generic (
-- active reset value
- RESET_VALUE : std_logic;
+ RESET_VALUE : std_logic
-- active logic value
- LOGIC_ACT : std_logic
+ --LOGIC_ACT : std_logic;
);
port(
--System inputs
clk : in std_logic;
- reset : in std_logic
+ reset : in std_logic;
+ dec_instr : in dec_op;
+ regfile_val : in gp_register_t;
+ reg_we : in std_logic;
+ reg_addr : in gp_addr_t;
+ ext_reg : in extmod_rec;
+ --System output
+ result : out gp_register_t;--reg
+ result_addr : out gp_addr_t;--reg
+ addr : out word_t; --memaddr
+ data : out gp_register_t; --mem data --ureg
+ alu_jump : out std_logic;--reg
+ brpr : out std_logic; --reg
+ wr_en : out std_logic;--regop --reg
+ dmem : out std_logic;--memop
+ dmem_write_en : out std_logic;
+ hword : out std_logic;
+ byte_s : out std_logic;
+
+ ext_data_out : out gp_register_t
);
end component execute_stage;
port(
--System inputs
clk : in std_logic;
- reset : in std_logic
+ reset : in std_logic;
result : in gp_register_t; --reg (alu result or jumpaddr)
result_addr : in gp_addr_t; --reg
reg_we : out std_logic;
reg_addr : out gp_addr_t;
jump_addr : out instruction_addr_t;
- jump : out std_logic
+ jump : out std_logic;
+ -- same here
+ bus_tx : out std_logic;
+ bus_rx : in std_logic;
+
+ sseg0 : out std_logic_vector(0 to 6);
+ sseg1 : out std_logic_vector(0 to 6);
+ sseg2 : out std_logic_vector(0 to 6);
+ sseg3 : out std_logic_vector(0 to 6);
+
+ int_req : out interrupt_t
+
);
end component writeback_stage;