src/mainboard/tyan/s2850/Config.lb

   1 ##
   2 ## Compute the location and size of where this firmware image
   3 ## (coreboot plus bootloader) will live in the boot rom chip.
   4 ##
   5 if USE_FALLBACK_IMAGE
   6         default ROM_SECTION_SIZE   = FALLBACK_SIZE
   7         default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
   8 else
   9         default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
  10         default ROM_SECTION_OFFSET = 0
  11 end
  12
  13 ##
  14 ## Compute the start location and size size of
  15 ## The coreboot bootloader.
  16 ##
  17 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
  18 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
  19
  20 ##
  21 ## Compute where this copy of coreboot will start in the boot rom
  22 ##
  23 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
  24
  25 ##
  26 ## Compute a range of ROM that can cached to speed up coreboot,
  27 ## execution speed.
  28 ##
  29 ## XIP_ROM_SIZE must be a power of 2.
  30 ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
  31 ##
  32 default XIP_ROM_SIZE=65536
  33 default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
  34
  35 arch i386 end
  36
  37 ##
  38 ## Build the objects we have code for in this directory.
  39 ##
  40
  41 driver mainboard.o
  42
  43 #dir /drivers/si/3114
  44
  45 if HAVE_MP_TABLE object mptable.o end
  46 if HAVE_PIRQ_TABLE object irq_tables.o end
  47
  48 if USE_DCACHE_RAM
  49
  50 if CONFIG_USE_INIT
  51
  52 makerule ./auto.o
  53         depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
  54         action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
  55 end
  56
  57 else
  58
  59 makerule ./auto.inc
  60         depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
  61         action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@"
  62         action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
  63         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
  64 end
  65
  66 end
  67 else
  68
  69 ##
  70 ## Romcc output
  71 ##
  72 makerule ./failover.E
  73         depends "$(MAINBOARD)/failover.c ../romcc"
  74         action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
  75 end
  76
  77 makerule ./failover.inc
  78         depends "$(MAINBOARD)/failover.c ../romcc"
  79         action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
  80 end
  81
  82 makerule ./auto.E
  83         depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
  84         action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
  85 end
  86 makerule ./auto.inc
  87         depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
  88         action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
  89 end
  90
  91 end
  92 ##
  93 ## Build our 16 bit and 32 bit coreboot entry code
  94 ##
  95 if USE_FALLBACK_IMAGE
  96         mainboardinit cpu/x86/16bit/entry16.inc
  97         ldscript /cpu/x86/16bit/entry16.lds
  98 end
  99
 100 mainboardinit cpu/x86/32bit/entry32.inc
 101
 102 if USE_DCACHE_RAM
 103         if CONFIG_USE_INIT
 104                 ldscript /cpu/x86/32bit/entry32.lds
 105         end
 106
 107         if CONFIG_USE_INIT
 108                 ldscript      /cpu/amd/car/cache_as_ram.lds
 109         end
 110 end
 111
 112 ##
 113 ## Build our reset vector (This is where coreboot is entered)
 114 ##
 115 if USE_FALLBACK_IMAGE
 116         mainboardinit cpu/x86/16bit/reset16.inc
 117         ldscript /cpu/x86/16bit/reset16.lds
 118 else
 119         mainboardinit cpu/x86/32bit/reset32.inc
 120         ldscript /cpu/x86/32bit/reset32.lds
 121 end
 122
 123 if USE_DCACHE_RAM
 124 else
 125 ### Should this be in the northbridge code?
 126 mainboardinit arch/i386/lib/cpu_reset.inc
 127 end
 128
 129 ##
 130 ## Include an id string (For safe flashing)
 131 ##
 132 mainboardinit arch/i386/lib/id.inc
 133 ldscript /arch/i386/lib/id.lds
 134
 135 if USE_DCACHE_RAM
 136 ##
 137 ## Setup Cache-As-Ram
 138 ##
 139 mainboardinit cpu/amd/car/cache_as_ram.inc
 140 end
 141
 142 ###
 143 ### This is the early phase of coreboot startup
 144 ### Things are delicate and we test to see if we should
 145 ### failover to another image.
 146 ###
 147 if USE_FALLBACK_IMAGE
 148 if USE_DCACHE_RAM
 149        ldscript /arch/i386/lib/failover.lds
 150 else
 151        ldscript /arch/i386/lib/failover.lds
 152         mainboardinit ./failover.inc
 153 end
 154 end
 155
 156 ###
 157 ### O.k. We aren't just an intermediary anymore!
 158 ###
 159
 160 ##
 161 ## Setup RAM
 162 ##
 163 if USE_DCACHE_RAM
 164
 165 if CONFIG_USE_INIT
 166 initobject auto.o
 167 else
 168 mainboardinit ./auto.inc
 169 end
 170
 171 else
 172
 173 ##
 174 ## Setup RAM
 175 ##
 176 mainboardinit cpu/x86/fpu/enable_fpu.inc
 177 mainboardinit cpu/x86/mmx/enable_mmx.inc
 178 mainboardinit cpu/x86/sse/enable_sse.inc
 179 mainboardinit ./auto.inc
 180 mainboardinit cpu/x86/sse/disable_sse.inc
 181 mainboardinit cpu/x86/mmx/disable_mmx.inc
 182
 183 end
 184
 185 ##
 186 ## Include the secondary Configuration files
 187 ##
 188 config chip.h
 189
 190 # sample config for tyan/s2850
 191 chip northbridge/amd/amdk8/root_complex
 192         device apic_cluster 0 on
 193                 chip cpu/amd/socket_940
 194                         device apic 0 on end
 195                 end
 196         end
 197         device pci_domain 0 on
 198                 chip northbridge/amd/amdk8
 199                         device pci 18.0 on # LDT0
 200                                 #  devices on link 2, link 2 == LDT 2
 201                                 chip southbridge/amd/amd8111
 202                                         # this "device pci 0.0" is the parent the next one
 203                                         # PCI bridge
 204                                         device pci 0.0 on
 205                                                 device pci 0.0 on end
 206                                                 device pci 0.1 on end
 207                                                 device pci 0.2 off end
 208                                                 device pci 1.0 off end
 209                                                 #chip drivers/ati/ragexl
 210                                                 chip drivers/pci/onboard
 211                                                         device pci b.0 on end
 212                                                         register "rom_address" = "0xfff80000"
 213                                                 end
 214                                         end
 215                                         device pci 1.0 on
 216                                                 chip superio/winbond/w83627hf
 217                                                         device pnp 2e.0 on #  Floppy
 218                                                                 io 0x60 = 0x3f0
 219                                                                 irq 0x70 = 6
 220                                                                 drq 0x74 = 2
 221                                                         end
 222                                                         device pnp 2e.1 off #  Parallel Port
 223                                                                 io 0x60 = 0x378
 224                                                                 irq 0x70 = 7
 225                                                         end
 226                                                         device pnp 2e.2 on #  Com1
 227                                                                 io 0x60 = 0x3f8
 228                                                                 irq 0x70 = 4
 229                                                         end
 230                                                         device pnp 2e.3 off #  Com2
 231                                                                 io 0x60 = 0x2f8
 232                                                                 irq 0x70 = 3
 233                                                         end
 234                                                         device pnp 2e.5 on #  Keyboard
 235                                                                 io 0x60 = 0x60
 236                                                                 io 0x62 = 0x64
 237                                                                 irq 0x70 = 1
 238                                                                 irq 0x72 = 12
 239                                                         end
 240                                                        device pnp 2e.6 off #  CIR
 241                                                                 io 0x60 = 0x100
 242                                                         end
 243                                                         device pnp 2e.7 off #  GAME_MIDI_GIPO1
 244                                                                 io 0x60 = 0x220
 245                                                                 io 0x62 = 0x300
 246                                                                 irq 0x70 = 9
 247                                                         end
 248                                                         device pnp 2e.8 off end #  GPIO2
 249                                                         device pnp 2e.9 off end #  GPIO3
 250                                                         device pnp 2e.a off end #  ACPI
 251                                                         device pnp 2e.b on #  HW Monitor
 252                                                                 io 0x60 = 0x290
 253                                                                 irq 0x70 = 5
 254                                                         end
 255                                                 end
 256                                         end
 257                                         device pci 1.1 on end
 258                                         device pci 1.2 on end
 259                                         device pci 1.3 on
 260                                                 chip drivers/generic/generic #dimm 0-0-0
 261                                                         device i2c 50 on end
 262                                                 end
 263                                                 chip drivers/generic/generic #dimm 0-0-1
 264                                                         device i2c 51 on end
 265                                                 end
 266                                                 chip drivers/generic/generic #dimm 0-1-0
 267                                                         device i2c 52 on end
 268                                                 end
 269                                                 chip drivers/generic/generic #dimm 0-1-1
 270                                                         device i2c 53 on end
 271                                                 end
 272                                         end
 273                                         device pci 1.5 on end
 274                                         device pci 1.6 off end
 275                                         register "ide0_enable" = "1"
 276                                         register "ide1_enable" = "1"
 277                                 end
 278                         end #  device pci 18.0
 279                         device pci 18.0 on end
 280                         device pci 18.0 on end
 281
 282                         device pci 18.1 on end
 283                         device pci 18.2 on end
 284                         device pci 18.3 on end
 285                 end
 286         end
 287 end
 288