# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
-#
-# Requirements (example is for Debian, replace package names as needed):
-#
-# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
-# libmpc-dev autoconf texinfo build-essential
-#
-# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
-#
+# adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
+# Matthias Rampke <matthias@rampke.de>
+# requires Homebrew <https://mxcl.github.com/homebrew>
# Stop if any command fails
set -e
# Settings section
# You probably want to customize those
##############################################################################
-TARGET=arm-none-eabi # Or: TARGET=arm-elf
-PREFIX=${HOME}/sat # Install location of your final toolchain
-DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
+TARGET=arm-eabi # Or: TARGET=arm-elf
+PREFIX=${HOME}/arm # Install location of your final toolchain
+PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
# Set to 'sudo' if you need superuser privileges while installing
-SUDO=
+SUDO=''
# Set to 1 to be quieter while running
QUIET=0
# Set to 1 to use linaro gcc instead of the FSF gcc
# Set to 1 to build libopenstm32 an open source library for stm32
LIBOPENSTM32_EN=1
# Make the gcc default to Cortex-M3
-DEFAULT_TO_CORTEX_M3=0
+DEFAULT_TO_CORTEX_M3=1
##############################################################################
# Version and download url settings section
# For FSF GCC:
GCCVERSION=4.5.1
GCC=gcc-${GCCVERSION}
+ GCCDIR=${GCC}
GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
else
# For the Linaro GCC:
- GCCRELEASE=4.5-2010.11-0
- GCCVERSION=4.5-2010.11-1
- GCC=gcc-linaro-${GCCVERSION}
- GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
+ GCCRELEASE=4.6-2011.07
+ GCCVERSION=4.6-2011.07-0
+ GCC=gcc-linaro-${GCCRELEASE}
+ GCCDIR=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2
fi
-BINUTILS=binutils-2.20
-NEWLIB=newlib-1.18.0
-GDB=gdb-7.2
+BINUTILS=binutils-2.21
+NEWLIB=newlib-1.19.0
+GDB=gdb-7.3
OOCD=master
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
;;
Darwin)
echo "Found Darwin OS."
- GCCFLAGS="${GCCFLAGS} \
- --with-gmp=${DARWIN_OPT_PATH} \
- --with-mpfr=${DARWIN_OPT_PATH} \
- --with-mpc=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+
+ # darwin dependencies
+ DARWINDEPS="wget mpfr libmpc gmp"
+ DARWINDEPSCOUNT=4
+
+ echo "Installing dependencies ..."
+ if ! which brew > /dev/null; then
+ echo "Homebrew not installed."
+ else
+ brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
+ fi
+
+ GCCFLAGS="${GCCFLAGS} \
+ --with-gmp=$(brew --prefix gmp) \
+ --with-mpfr=$(brew --prefix mpfr) \
+ --with-mpc=$(brew --prefix mpc)
+ -with-libiconv-prefix=$(brew --prefix libiconv)"
+
+ TAR=gnutar
+
OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
;;
function fetch {
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
- wget -c --no-passive-ftp $2
+ wget -c $2
touch ${STAMPS}/$1.fetch
fi
}
unpack ${GCC} boot
cd build
log "Configuring ${GCC}-boot"
- ../${GCC}/configure --target=${TARGET} \
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
cd ..
log "Cleaning up ${GCC}-boot"
touch ${STAMPS}/${GCC}-boot.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCCDIR}
fi
if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
unpack ${GCC}
cd build
log "Configuring ${GCC}"
- ../${GCC}/configure --target=${TARGET} \
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
cd ..
log "Cleaning up ${GCC}"
touch ${STAMPS}/${GCC}.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCCDIR}
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then