-#!/bin/bash
+#!/bin/sh
# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
-#
-# Requirements (example is for Debian, replace package names as needed):
-#
-# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
-# libmpc-dev autoconf texinfo build-essential
-#
-# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
-#
+# adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
+# Matthias Rampke <matthias@rampke.de>
+# requires Homebrew <https://mxcl.github.com/homebrew>
# Stop if any command fails
set -e
# You probably want to customize those
##############################################################################
TARGET=arm-none-eabi # Or: TARGET=arm-elf
-PREFIX=${HOME}/sat # Install location of your final toolchain
+[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain
+[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory
PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
-DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
# Set to 'sudo' if you need superuser privileges while installing
-SUDO=
+SUDO=''
# Set to 1 to be quieter while running
QUIET=0
# Set to 1 to use linaro gcc instead of the FSF gcc
USE_LINARO=0
+# Set to 1 to enable C++
+USE_CPP=0
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=0
# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
# Set to 1 to build libopenstm32 an open source library for stm32
LIBOPENSTM32_EN=0
# Make the gcc default to Cortex-M3
-DEFAULT_TO_CORTEX_M3=0
+DEFAULT_TO_CORTEX_M3=1
##############################################################################
# Version and download url settings section
##############################################################################
-if [ ${USE_LINARO} == 0 ] ; then
+if [ ${USE_LINARO} = 0 ] ; then
# For FSF GCC:
- GCCVERSION=4.5.1
- GCC=gcc-${GCCVERSION}
- GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+ GCCVERSION=4.6.1
+ if [ ${USE_CPP} = 0 ]; then
+ GCC=gcc-core-${GCCVERSION}
+ GCCDIR=gcc-${GCCVERSION}
+ else
+ GCC=gcc-${GCCVERSION}
+ GCCDIR=${GCC}
+ fi
+ GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2
else
# For the Linaro GCC:
- GCCVERSION=4.5-2010.08-1
- GCC=gcc-linaro-${GCCVERSION}
- GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
+ GCCRELEASE=4.6-2011.07
+ GCCVERSION=4.6-2011.07-0
+ GCC=gcc-linaro-${GCCRELEASE}
+ GCCDIR=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2
fi
-BINUTILS=binutils-2.20
-NEWLIB=newlib-1.18.0
-GDB=gdb-7.2
+BINUTILS=binutils-2.21
+NEWLIB=newlib-1.19.0
+GDB=gdb-7.3
+OOCD=master
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
# Flags section
##############################################################################
+if which getconf > /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+else
+ CPUS=1
+fi
+PARALLEL=-j$((CPUS + 1))
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
+
GDBFLAGS=
BINUTILFLAGS=
-if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then
GCCFLAGS=
else
# To default to the Cortex-M3:
export PATH="${PREFIX}/bin:${PATH}"
-SUMMON_DIR=$(pwd)
+SUMMON_DIR=${WORKDIR}
SOURCES=${SUMMON_DIR}/sources
STAMPS=${SUMMON_DIR}/stamps
;;
Darwin)
echo "Found Darwin OS."
- GCCFLAGS="${GCCFLAGS} \
- --with-gmp=${DARWIN_OPT_PATH} \
- --with-mpfr=${DARWIN_OPT_PATH} \
- --with-mpc=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+
+ # darwin dependencies
+ DARWINDEPS="wget mpfr libmpc gmp"
+ DARWINDEPSCOUNT=4
+
+ echo "Installing dependencies ..."
+ if ! which brew > /dev/null; then
+ echo "Homebrew not installed."
+ else
+ brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
+ fi
+
+ GCCFLAGS="${GCCFLAGS} \
+ --with-gmp=$(brew --prefix gmp) \
+ --with-mpfr=$(brew --prefix mpfr) \
+ --with-mpc=$(brew --prefix mpc)
+ -with-libiconv-prefix=$(brew --prefix libiconv)"
+
+ TAR=gnutar
+
+ OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
+ OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+ ;;
+ CYGWIN*)
+ echo "Found CygWin that means Windows most likely."
;;
*)
echo "Found unknown OS. Aborting!"
##############################################################################
# Fetch a versioned file from a URL
-function fetch {
+fetch() {
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
- wget -c --no-passive-ftp $2
+ wget -c $2
touch ${STAMPS}/$1.fetch
fi
}
# Log a message out to the console
-function log {
+log() {
echo "******************************************************************"
echo "* $*"
echo "******************************************************************"
}
# Unpack an archive
-function unpack {
+unpack() {
log Unpacking $*
# Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
}
# Install a build
-function install {
+install() {
log $1
${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
}
-
+if [ ! -d $SUMMON_DIR ]; then
+ mkdir -p ${SUMMON_DIR}
+ SUMMON_DIR_CREATED=1
+else
+ SUMMON_DIR_CREATED=0
+fi
mkdir -p ${STAMPS} ${SOURCES}
cd ${SOURCES}
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+ log "Cloning OpenOCD sources..."
+ git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+ cd openocd-${OOCD}
+ ./bootstrap
+ cd ..
+ tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+ #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+ # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+ rm -rf openocd-${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
log "Cloning libcmsis sources..."
unpack ${GCC} boot
cd build
log "Configuring ${GCC}-boot"
- ../${GCC}/configure --target=${TARGET} \
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
cd ..
log "Cleaning up ${GCC}-boot"
touch ${STAMPS}/${GCC}-boot.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCCDIR}
fi
if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
unpack ${NEWLIB}
cd build
log "Configuring ${NEWLIB}"
+ # configuration options and flags partially
+ # from https://github.com/jsnyder/arm-eabi-toolchain
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--disable-nls \
--disable-werror \
--disable-newlib-supplied-syscalls \
+ --disable-shared \
+ --disable-nls \
+ --disable-libgloss \
--with-float=soft
log "Building ${NEWLIB}"
- make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"
+ NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs"
+ make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}"
install ${NEWLIB} install
cd ..
log "Cleaning up ${NEWLIB}"
unpack ${GCC}
cd build
log "Configuring ${GCC}"
- ../${GCC}/configure --target=${TARGET} \
+ [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}"
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
- --enable-languages="c,c++" \
--with-newlib \
--disable-shared \
--with-gnu-as \
cd ..
log "Cleaning up ${GCC}"
touch ${STAMPS}/${GCC}.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCCDIR}
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then
rm -rf build/* ${GDB}
fi
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+ unpack openocd-${OOCD}
+ cd build
+ log "Configuring openocd-${OOCD}"
+ CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+ LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+ ../openocd-${OOCD}/configure --enable-maintainer-mode \
+ --prefix=${PREFIX} \
+ --enable-dummy \
+ --enable-parport \
+ --enable-ft2232_libftdi \
+ --enable-usb_blaster_libftdi \
+ --enable-amtjtagaccel \
+ --enable-zy1000 \
+ --enable-ep93xx \
+ --enable-at91rm9200 \
+ --enable-gw16012 \
+ --enable-presto_libftdi \
+ --enable-usbprog \
+ --enable-jlink \
+ --enable-vsllink \
+ --enable-rlink \
+ --enable-arm-jtag-ew \
+ --enable-buspirate
+ log "Building openocd-${OOCD}"
+ make ${MAKEFLAGS}
+ install openocd-${OOCD} install
+ cd ..
+ log "Cleaning up openocd-${OOCD}"
+ touch ${STAMPS}/openocd-${OOCD}.build
+ rm -rf build/* ${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
unpack libcmsis-${LIBCMSIS}
rm -rf libopenstm32-${LIBOPENSTM32}
fi
fi
+
+if [ ${SUMMON_DIR_CREATED} = 1 ]; then
+ log "Removing work directory"
+ rm -rf ${SUMMON_DIR}
+fi
projects / summon-arm-toolchain.git / blobdiff