# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
-#
-# Requirements (example is for Debian, replace package names as needed):
-#
-# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
-# libmpc-dev autoconf texinfo build-essential
-#
-# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
-#
+# adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
+# Matthias Rampke <matthias@rampke.de>
+# requires Homebrew <https://mxcl.github.com/homebrew>
# Stop if any command fails
set -e
# Settings section
# You probably want to customize those
##############################################################################
-TARGET=arm-none-eabi # Or: TARGET=arm-elf
-PREFIX=${HOME}/sat # Install location of your final toolchain
-DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
+TARGET=arm-eabi # Or: TARGET=arm-elf
+PREFIX=${HOME}/arm # Install location of your final toolchain
+PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
# Set to 'sudo' if you need superuser privileges while installing
-SUDO=
+SUDO=''
# Set to 1 to be quieter while running
-QUIET=0
+QUIET=1
# Set to 1 to use linaro gcc instead of the FSF gcc
-USE_LINARO=0
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
# Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=0
+LIBOPENSTM32_EN=1
# Make the gcc default to Cortex-M3
-DEFAULT_TO_CORTEX_M3=0
+DEFAULT_TO_CORTEX_M3=1
##############################################################################
# Version and download url settings section
GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
else
# For the Linaro GCC:
- GCCVERSION=4.5-2010.08-1
+ GCCRELEASE=4.6-2011.07
+ GCCVERSION=${GCCRELEASE}
GCC=gcc-linaro-${GCCVERSION}
- GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
+ GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/${GCC}.tar.bz2
fi
-BINUTILS=binutils-2.20
-NEWLIB=newlib-1.18.0
-GDB=gdb-7.2
+BINUTILS=binutils-2.21
+NEWLIB=newlib-1.19.0
+GDB=gdb-7.3
+OOCD=master
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
# Flags section
##############################################################################
-CPUS=$(getconf _NPROCESSORS_ONLN)
+if which getconf > /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+else
+ CPUS=1
+fi
PARALLEL=-j$((CPUS + 1))
echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
;;
Darwin)
echo "Found Darwin OS."
- GCCFLAGS="${GCCFLAGS} \
- --with-gmp=${DARWIN_OPT_PATH} \
- --with-mpfr=${DARWIN_OPT_PATH} \
- --with-mpc=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+
+ # darwin dependencies
+ DARWINDEPS="gnu-tar wget mpfr libmpc gmp"
+ DARWINDEPSCOUNT=4
+
+ echo "Installing dependencies ..."
+ if ! which brew > /dev/null; then
+ echo "Homebrew not installed."
+ else
+ brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
+ fi
+
+ GCCFLAGS="${GCCFLAGS} \
+ --with-gmp=$(brew --prefix gmp) \
+ --with-mpfr=$(brew --prefix mpfr) \
+ --with-mpc=$(brew --prefix mpc)
+ -with-libiconv-prefix=$(brew --prefix libiconv)"
+
+ TAR=gnutar
+
+ OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
+ OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+ ;;
+ CYGWIN*)
+ echo "Found CygWin that means Windows most likely."
;;
*)
echo "Found unknown OS. Aborting!"
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+ log "Cloning OpenOCD sources..."
+ git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+ cd openocd-${OOCD}
+ ./bootstrap
+ cd ..
+ tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+ #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+ # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+ rm -rf openocd-${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
log "Cloning libcmsis sources..."
rm -rf build/* ${GDB}
fi
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+ unpack openocd-${OOCD}
+ cd build
+ log "Configuring openocd-${OOCD}"
+ CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+ LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+ ../openocd-${OOCD}/configure --enable-maintainer-mode \
+ --prefix=${PREFIX} \
+ --enable-dummy \
+ --enable-parport \
+ --enable-ft2232_libftdi \
+ --enable-usb_blaster_libftdi \
+ --enable-amtjtagaccel \
+ --enable-zy1000 \
+ --enable-ep93xx \
+ --enable-at91rm9200 \
+ --enable-gw16012 \
+ --enable-presto_libftdi \
+ --enable-usbprog \
+ --enable-jlink \
+ --enable-vsllink \
+ --enable-rlink \
+ --enable-arm-jtag-ew \
+ --enable-buspirate
+ log "Building openocd-${OOCD}"
+ make ${MAKEFLAGS}
+ install openocd-${OOCD} install
+ cd ..
+ log "Cleaning up openocd-${OOCD}"
+ touch ${STAMPS}/openocd-${OOCD}.build
+ rm -rf build/* ${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
unpack libcmsis-${LIBCMSIS}