disable OpenOCD

[summon-arm-toolchain.git] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index c97e5f85a4a173a8fd611e69ffd2380034e42125..7cb10a51724bbf2884042e632d1c131d7a89f3ef 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -4,6 +4,7 @@
 
 # adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
 # Matthias Rampke <matthias@rampke.de>
+# requires Homebrew <https://mxcl.github.com/homebrew>
 
 # Stop if any command fails
 set -e
@@ -15,15 +16,14 @@ set -e
 TARGET=arm-eabi                # Or: TARGET=arm-elf
 PREFIX=${HOME}/arm     # Install location of your final toolchain
 PARALLEL=                      # Or: PARALLEL="-j 5" for 4 CPUs
-DARWIN_CELLAR=$(brew --cellar) # Path in which MacPorts or Fink is installed
 # Set to 'sudo' if you need superuser privileges while installing
 SUDO=''
 # Set to 1 to be quieter while running
-QUIET=1
+QUIET=0
 # Set to 1 to use linaro gcc instead of the FSF gcc
 USE_LINARO=1
 # Set to 1 to enable building of OpenOCD
-OOCD_EN=1
+OOCD_EN=0
 # Set to 1 to build libstm32 provided by ST
 LIBSTM32_EN=0
 # Set to 1 to build libopenstm32 an open source library for stm32
@@ -38,13 +38,15 @@ if [ ${USE_LINARO} == 0 ] ; then
        # For FSF GCC:
        GCCVERSION=4.5.1
        GCC=gcc-${GCCVERSION}
+        GCCDIR=${GCC}
        GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
 else
        # For the Linaro GCC:
        GCCRELEASE=4.6-2011.07
-       GCCVERSION=${GCCRELEASE}
-       GCC=gcc-linaro-${GCCVERSION}
-       GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
+       GCCVERSION=4.6-2011.07-0
+        GCC=gcc-linaro-${GCCRELEASE}
+       GCCDIR=gcc-linaro-${GCCVERSION}
+       GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2
 fi
 
 BINUTILS=binutils-2.21
@@ -116,14 +118,14 @@ case "$(uname)" in
        echo "Found Darwin OS."
 
        # darwin dependencies
-       DARWINDEPS="gnu-tar wget mpfr libmpc gmp"
+       DARWINDEPS="wget mpfr libmpc gmp"
   DARWINDEPSCOUNT=4
 
-  echo "Installing dependencies"
+  echo "Installing dependencies ..."
   if ! which brew > /dev/null; then
-    echo "homebrew not installed."
+    echo "Homebrew not installed."
   else
-    brew install ${DARWINDEPS} | grep -v '^Warning: Formula already installed: '
+      brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
   fi
 
   GCCFLAGS="${GCCFLAGS} \
@@ -155,7 +157,7 @@ esac
 function fetch {
     if [ ! -e ${STAMPS}/$1.fetch ]; then
         log "Downloading $1 sources..."
-        wget -c --no-passive-ftp $2
+        wget -c $2
         touch ${STAMPS}/$1.fetch
     fi
 }
@@ -296,7 +298,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
     unpack ${GCC} boot
     cd build
     log "Configuring ${GCC}-boot"
-    ../${GCC}/configure --target=${TARGET} \
+    ../${GCCDIR}/configure --target=${TARGET} \
                       --prefix=${PREFIX} \
                       --enable-interwork \
                       --enable-multilib \
@@ -316,7 +318,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
     cd ..
     log "Cleaning up ${GCC}-boot"
     touch ${STAMPS}/${GCC}-boot.build
-    rm -rf build/* ${GCC}
+    rm -rf build/* ${GCCDIR}
 fi
 
 if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
@@ -347,7 +349,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
     unpack ${GCC}
     cd build
     log "Configuring ${GCC}"
-    ../${GCC}/configure --target=${TARGET} \
+    ../${GCCDIR}/configure --target=${TARGET} \
                       --prefix=${PREFIX} \
                       --enable-interwork \
                       --enable-multilib \
@@ -366,7 +368,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
     cd ..
     log "Cleaning up ${GCC}"
     touch ${STAMPS}/${GCC}.build
-    rm -rf build/* ${GCC}
+    rm -rf build/* ${GCCDIR}
 fi
 
 if [ ! -e ${STAMPS}/${GDB}.build ]; then