-#!/bin/bash
+#!/bin/sh
# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
-TARGET=arm-elf # Or: TARGET=arm-none-eabi
-PREFIX=${HOME}/arm-elf # Install location of your final toolchain
-PARALLEL="" # Or: PARALLEL="-j 5" for 4 CPU's
-DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
-
-BINUTILS=binutils-2.19.1
-GCC=gcc-4.4.0
-NEWLIB=newlib-1.17.0
-GDB=gdb-6.8
-LIBCMSIS=v1.10-2
-LIBSTM32=v3.0.0-1
-LIBSTM32USB=v3.0.1-1
-LIBOPENSTM32=master
-LIBSTM32_EN=0
-LIBOPENSTM32_EN=0
+# adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
+# Matthias Rampke <matthias@rampke.de>
+# requires Homebrew <https://mxcl.github.com/homebrew>
-export PATH="${PREFIX}/bin:${PATH}"
+# Stop if any command fails
+set -e
-case "$(uname)" in
- Linux)
- echo "Found Linux OS."
- GCCFLAGS=
- GDBFLAGS=
- ;;
- Darwin)
- echo "Found Darwin OS."
- GCCFLAGS="--with-gmp=${DARWIN_OPT_PATH} \
- --with-mpfr=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
- GDBFLAGS="--disable-werror"
- ;;
- *)
- echo "Found unknown OS. Aborting!"
- exit 1
- ;;
-esac
+##############################################################################
+# Settings section
+# You probably want to customize those
+##############################################################################
+TARGET=arm-none-eabi # Or: TARGET=arm-elf
+[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain
+[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory
+PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
+# Set to 'sudo' if you need superuser privileges while installing
+SUDO=''
+# Set to 1 to be quieter while running
+QUIET=0
+# Set to 1 to use linaro gcc instead of the FSF gcc
+USE_LINARO=0
+# Set to 1 to enable C++
+USE_CPP=0
+# Make the gcc default to Cortex-M3
+DEFAULT_TO_CORTEX_M3=1
-if [ ! -e sources ]; then
- mkdir sources
+##############################################################################
+# Version and download url settings section
+##############################################################################
+if [ ${USE_LINARO} = 0 ] ; then
+ # For FSF GCC:
+ GCCVERSION=4.6.1
+ if [ ${USE_CPP} = 0 ]; then
+ GCC=gcc-core-${GCCVERSION}
+ GCCDIR=gcc-${GCCVERSION}
+ else
+ GCC=gcc-${GCCVERSION}
+ GCCDIR=${GCC}
+ fi
+ GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2
+else
+ # For the Linaro GCC:
+ GCCRELEASE=4.6-2011.07
+ GCCVERSION=4.6-2011.07-0
+ GCC=gcc-linaro-${GCCRELEASE}
+ GCCDIR=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2
fi
-cd sources
-if [ ! -e ${BINUTILS}.tar.bz2 ]; then
- echo "Downloading binutils sources..."
- wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
-fi
+BINUTILS=binutils-2.21.1
+NEWLIB=newlib-1.19.0
+GDB=gdb-7.3.1
+GMP=gmp-5.0.2
+MPFR=mpfr-3.0.1
+MPC=mpc-0.9
-if [ ! -e ${GCC}.tar.bz2 ]; then
- echo "Downloading gcc sources..."
- wget -c ftp://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
+SHA1SUMS="525255ca6874b872540c9967a1d26acfbc7c8230 binutils-2.21.1.tar.bz2
+8bf66f7a71534ba564563a0ba0b2517aead8ac30 gcc-4.6.1.tar.bz2
+9b766705f051ffb7321de58f247688b0ae661b98 gcc-core-4.6.1.tar.bz2
+828d99a63e0578879150f5681d234763cff69313 gcc-linaro-4.6-2011.07.tar.bz2
+e57f2c7f93536ef54fab728eb733bf2c36550718 gdb-7.3.1.tar.bz2
+2968220e1988eabb61f921d11e5d2db5431e0a35 gmp-5.0.2.tar.bz2
+229722d553030734d49731844abfef7617b64f1a mpc-0.9.tar.gz
+fbf402fc196724ae60ef01eb6ca8490b1ea4db69 mpfr-3.0.1.tar.bz2
+b2269d30ce7b93b7c714b90ef2f40221c2df0fcd newlib-1.19.0.tar.gz"
+
+##############################################################################
+# Flags section
+##############################################################################
+
+if which getconf > /dev/null 2> /dev/null && getconf _NPROCESSORS_ONLN > /dev/null 2> /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+elif which sysctl > /dev/null 2> /dev/null && sysctl hw.ncpu 2> /dev/null > /dev/null; then
+ CPUS=$(sysctl hw.ncpu | sed -E -e 's/^hw\.ncpu(: | = )//')
+else
+ CPUS=1
fi
+PARALLEL=-j$((CPUS + 1))
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
-if [ ! -e ${NEWLIB}.tar.gz ]; then
- echo "Downloading newlib sources..."
- wget -c ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+GDBFLAGS=
+BINUTILFLAGS=
+
+if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then
+ GCCFLAGS=
+else
+ # To default to the Cortex-M3:
+ GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft"
fi
-if [ ! -e ${GDB}.tar.bz2 ]; then
- echo "Downloading gdb sources..."
- wget -c ftp://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+ . ./local.sh
fi
-if [ ${LIBSTM32_EN} != 0 ]; then
-if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
- echo "Cloning libcmsis sources..."
- git clone git://git.open-bldc.org/libcmsis.git
- cd libcmsis
- git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
- bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2
- cd ..
- rm -rf libcmsis
+MAKEFLAGS=${PARALLEL} ${MAKESILENT}
+TARFLAGS=v
+MAKESILENT=
+
+if [ ${QUIET} != 0 ]; then
+ TARFLAGS=
+ MAKESILENT="-s"
fi
-if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
- echo "Cloning libstm32 sources..."
- git clone git://git.open-bldc.org/libstm32.git
- cd libstm32
- git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
- bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2
- cd ..
- rm -rf libstm32
+export PATH="${PREFIX}/bin:${PATH}"
+
+SUMMON_DIR=${WORKDIR}
+SOURCES=${SUMMON_DIR}/sources
+STAMPS=${SUMMON_DIR}/stamps
+
+
+##############################################################################
+# OS and Tooldetection section
+# Detects which tools and flags to use
+##############################################################################
+
+# normalized fetching with whatever we can find
+if which fetch > /dev/null; then
+ FETCHCMD="fetch -p"
+elif which wget > /dev/null; then
+ FETCHCMD="wget -c"
+elif which curl > /dev/null; then
+ FETCHCMD="curl -C - -O -L"
+else
+ FETCHCMD=ftp # the only HTTP client on some BSD
fi
-if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
- echo "Cloning libstm32usb sources..."
- git clone git://git.open-bldc.org/libstm32usb.git
- cd libstm32usb
- git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
- bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2
- cd ..
- rm -rf libstm32usb
+if [ USE_LINARO = 1 ]; then
+ if which gnutar > /dev/null; then
+ TAR=gnutar
+ elif which gtar > /dev/null; then
+ TAR=gtar
+ else # hopefully it understands the GNU format
+ TAR=tar
+ fi
+else
+ TAR=tar # use the system tar
fi
+
+if [ -z ${MAKE} ]; then
+ if which gnumake > /dev/null; then
+ export MAKE=gnumake
+ elif which gmake > /dev/null; then
+ export MAKE=gmake
+ else
+ export MAKE=make # should be GNU make
+ fi
fi
-if [ ${LIBOPENSTM32_EN} != 0 ]; then
-if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
- echo "Cloning libopenstm32 sources..."
- git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
- cd libopenstm32
- git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
- bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
- cd ..
- rm -rf libopenstm32
+##############################################################################
+# Building section
+# You probably don't have to touch anything after this
+##############################################################################
+
+# Fetch a versioned file from a URL
+dofetch() {
+ if [ ! -e ${STAMPS}/$1.fetch ]; then
+ log "Downloading $1 sources..."
+ ${FETCHCMD} $2
+ touch ${STAMPS}/$1.fetch
+ fi
+}
+
+# Log a message out to the console
+log() {
+ echo "******************************************************************"
+ echo "* $*"
+ echo "******************************************************************"
+}
+
+# Unpack an archive
+unpack() {
+ log Unpacking $*
+ # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
+ ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
+ case ${ARCHIVE} in
+ *.bz2)
+ echo "archive type bz2"
+ TYPE=j
+ ;;
+ *.gz)
+ echo "archive type gz"
+ TYPE=z
+ ;;
+ *)
+ echo "Unknown archive type of $1"
+ echo "leaving the decision to tar"
+ TYPE=
+ ;;
+ esac
+ ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
+}
+
+# Install a build
+doinstall() {
+ log $1
+ ${SUDO} ${MAKE} ${MAKESILENT} $2 $3 $4 $5 $6 $7 $8
+}
+
+if [ ! -d $SUMMON_DIR ]; then
+ mkdir -p ${SUMMON_DIR}
+ SUMMON_DIR_CREATED=1
+else
+ SUMMON_DIR_CREATED=0
fi
+mkdir -p ${STAMPS} ${SOURCES}
+
+cd ${SOURCES}
+
+dofetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
+dofetch ${GCC} ${GCCURL}
+dofetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+dofetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+dofetch ${GMP} ftp://ftp.gmplib.org/pub/${GMP}/${GMP}.tar.bz2
+dofetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2
+dofetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz
+
+if which sha1sum > /dev/null; then
+ for f in ${BINUTILS} ${GCC} ${NEWLIB} ${GDB} ${GMP} ${MPFR} ${MPC}; do
+ ( echo "$SHA1SUMS" | grep -F $f | sha1sum -c - ) || ( log 'ERROR: Checksum fail!'; exit 1 )
+ done
+else
+ log "WARING: skipping checksum checks due to missing sha1sum"
fi
-cd ..
+cd ${SUMMON_DIR}
if [ ! -e build ]; then
mkdir build
fi
-if [ ! -e .${BINUTILS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${BINUTILS}"
- echo "******************************************************************"
- tar xfvj sources/${BINUTILS}.tar.bz2
+if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
+ unpack ${BINUTILS}
cd build
- echo "******************************************************************"
- echo "* Configuring ${BINUTILS}"
- echo "******************************************************************"
+ log "Configuring ${BINUTILS}"
../${BINUTILS}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls || exit
- echo "******************************************************************"
- echo "* Building ${BINUTILS}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${BINUTILS}"
- echo "******************************************************************"
- make install || exit
+ --disable-nls \
+ --disable-werror \
+ ${BINUTILFLAGS}
+ log "Building ${BINUTILS}"
+ ${MAKE} ${MAKEFLAGS}
+ doinstall ${BINUTILS} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${BINUTILS}"
- echo "******************************************************************"
- touch .${BINUTILS}.build
+ log "Cleaning up ${BINUTILS}"
+ touch ${STAMPS}/${BINUTILS}.build
rm -rf build/* ${BINUTILS}
fi
-if [ ! -e .${GCC}-boot.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}-boot"
- echo "******************************************************************"
- tar xfvj sources/${GCC}.tar.bz2
+if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
+ unpack ${GCC} boot
+ unpack ${GMP}
+ mv ${GMP} ${GCCDIR}/gmp
+ unpack ${MPFR}
+ mv ${MPFR} ${GCCDIR}/mpfr
+ unpack ${MPC}
+ mv ${MPC} ${GCCDIR}/mpc
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}-boot"
- echo "******************************************************************"
- ../${GCC}/configure --target=${TARGET} \
+ log "Configuring ${GCC}-boot"
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
- ${GCCFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GCC}-boot"
- echo "******************************************************************"
- make ${PARALLEL} all-gcc || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}-boot"
- echo "******************************************************************"
- make install-gcc || exit
+ --disable-werror \
+ --with-system-zlib \
+ ${GCCFLAGS}
+ log "Building ${GCC}-boot"
+ ${MAKE} ${MAKEFLAGS} all-gcc
+ doinstall ${GCC}-boot install-gcc
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}-boot"
- echo "******************************************************************"
- touch .${GCC}-boot.build
- rm -rf build/* ${GCC}
+ log "Cleaning up ${GCC}-boot"
+ touch ${STAMPS}/${GCC}-boot.build
+ rm -rf build/* ${GCCDIR}
fi
-if [ ! -e .${NEWLIB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${NEWLIB}"
- echo "******************************************************************"
- tar xfvz sources/${NEWLIB}.tar.gz
+if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
+ unpack ${NEWLIB}
cd build
- echo "******************************************************************"
- echo "* Configuring ${NEWLIB}"
- echo "******************************************************************"
+ log "Configuring ${NEWLIB}"
+ # configuration options and flags partially
+ # from https://github.com/jsnyder/arm-eabi-toolchain
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
- --disable-newlib-supplied-syscalls || exit
- echo "******************************************************************"
- echo "* Building ${NEWLIB}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${NEWLIB}"
- echo "******************************************************************"
- make install || exit
+ --disable-werror \
+ --disable-newlib-supplied-syscalls \
+ --disable-shared \
+ --disable-nls \
+ --disable-libgloss \
+ --with-float=soft
+ log "Building ${NEWLIB}"
+ NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs"
+ ${MAKE} ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}"
+ doinstall ${NEWLIB} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${NEWLIB}"
- echo "******************************************************************"
- touch .${NEWLIB}.build
+ log "Cleaning up ${NEWLIB}"
+ touch ${STAMPS}/${NEWLIB}.build
rm -rf build/* ${NEWLIB}
fi
# Yes, you need to build gcc again!
-if [ ! -e .${GCC}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}"
- echo "******************************************************************"
- tar xfvj sources/${GCC}.tar.bz2
+if [ ! -e ${STAMPS}/${GCC}.build ]; then
+ unpack ${GCC}
+ unpack ${GMP}
+ mv ${GMP} ${GCCDIR}/gmp
+ unpack ${MPFR}
+ mv ${MPFR} ${GCCDIR}/mpfr
+ unpack ${MPC}
+ mv ${MPC} ${GCCDIR}/mpc
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}"
- echo "******************************************************************"
- ../${GCC}/configure --target=${TARGET} \
+ log "Configuring ${GCC}"
+ [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}"
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
- --enable-languages="c,c++" \
--with-newlib \
--disable-shared \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
- ${GCCFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GCC}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}"
- echo "******************************************************************"
- make install || exit
+ --disable-werror \
+ --with-system-zlib \
+ ${GCCFLAGS}
+ log "Building ${GCC}"
+ ${MAKE} ${MAKEFLAGS}
+ doinstall ${GCC} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}"
- echo "******************************************************************"
- touch .${GCC}.build
- rm -rf build/* ${GCC}
+ log "Cleaning up ${GCC}"
+ touch ${STAMPS}/${GCC}.build
+ rm -rf build/* ${GCCDIR}
fi
-if [ ! -e .${GDB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GDB}"
- echo "******************************************************************"
- tar xfvj sources/${GDB}.tar.bz2
+if [ ! -e ${STAMPS}/${GDB}.build ]; then
+ unpack ${GDB}
cd build
- echo "******************************************************************"
- echo "* Configuring ${GDB}"
- echo "******************************************************************"
+ log "Configuring ${GDB}"
../${GDB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
- ${GDBFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GDB}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GDB}"
- echo "******************************************************************"
- make install || exit
+ --disable-werror \
+ ${GDBFLAGS}
+ log "Building ${GDB}"
+ ${MAKE} ${MAKEFLAGS}
+ doinstall ${GDB} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GDB}"
- echo "******************************************************************"
- touch .${GDB}.build
+ log "Cleaning up ${GDB}"
+ touch ${STAMPS}/${GDB}.build
rm -rf build/* ${GDB}
fi
-if [ ${LIBSTM32_EN} != 0 ]; then
-if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- tar xfvj sources/libcmsis-${LIBCMSIS}.tar.bz2
- cd libcmsis-${LIBCMSIS}
- echo "******************************************************************"
- echo "* Building libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
- cd ..
- echo "******************************************************************"
- echo "* Cleaning up libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- touch .libcmsis-${LIBCMSIS}.build
- rm -rf libcmsis-${LIBCMSIS}
-fi
-
-if [ ! -e .libstm32-${LIBSTM32}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32-${LIBSTM32}"
- echo "******************************************************************"
- tar xfvj sources/libstm32-${LIBSTM32}.tar.bz2
- cd libstm32-${LIBSTM32}
- echo "******************************************************************"
- echo "* Building libstm32-${LIBSTM32}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32-${LIBSTM32}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
- cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32-${LIBSTM32}"
- echo "******************************************************************"
- touch .libstm32-${LIBSTM32}.build
- rm -rf libstm32-${LIBSTM32}
-fi
-
-if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- tar xfvj sources/libstm32usb-${LIBSTM32USB}.tar.bz2
- cd libstm32usb-${LIBSTM32USB}
- echo "******************************************************************"
- echo "* Building libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
- cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- touch .libstm32usb-${LIBSTM32USB}.build
- rm -rf libstm32usb-${LIBSTM32USB}
-fi
-fi
-
-if [ $LIBOPENSTM32_EN != 0 ]; then
- echo "******************************************************************"
- echo "* Unpacking libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
- tar xfvj sources/libopenstm32-${LIBOPENSTM32}.tar.bz2
- cd libopenstm32-${LIBOPENSTM32}
- echo "******************************************************************"
- echo "* Building libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
- make PREFIX=${TARGET} DESTDIR=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
- make PREFIX=${TARGET} DESTDIR=${PREFIX} install || exit
- cd ..
- echo "******************************************************************"
- echo "* Cleaning up libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
- touch .libopenstm32-${LIBOPENSTM32}.build
- rm -rf libopenstm32-${LIBOPENSTM32}
+if [ ${SUMMON_DIR_CREATED} = 1 ]; then
+ log "Removing work directory"
+ rm -rf ${SUMMON_DIR}
fi
projects / summon-arm-toolchain.git / blobdiff