adjust header

[summon-arm-toolchain.git] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index b7314cfc508ec13f1707119c416a679801608789..5433a9e3a4c7a4f240effc5db29686b08d048bf3 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -2,14 +2,8 @@
 # Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
 # Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
 
-#
-# Requirements (example is for Debian, replace package names as needed):
-#
-# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
-# libmpc-dev autoconf texinfo build-essential
-#
-# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
-#
+# adapted for r0ket <http://r0ket.badge.events.ccc.de> development by
+# Matthias Rampke <matthias@rampke.de>
 
 # Stop if any command fails
 set -e
@@ -18,21 +12,24 @@ set -e
 # Settings section
 # You probably want to customize those
 ##############################################################################
-TARGET=arm-none-eabi           # Or: TARGET=arm-elf
-PREFIX=${HOME}/sat     # Install location of your final toolchain
-DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
+TARGET=arm-eabi                # Or: TARGET=arm-elf
+PREFIX=${HOME}/arm     # Install location of your final toolchain
+PARALLEL=                      # Or: PARALLEL="-j 5" for 4 CPUs
+DARWIN_CELLAR=$(brew --cellar) # Path in which MacPorts or Fink is installed
 # Set to 'sudo' if you need superuser privileges while installing
-SUDO=
+SUDO=''
 # Set to 1 to be quieter while running
-QUIET=0
+QUIET=1
 # Set to 1 to use linaro gcc instead of the FSF gcc
-USE_LINARO=0
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
 # Set to 1 to build libstm32 provided by ST
 LIBSTM32_EN=0
 # Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=0
+LIBOPENSTM32_EN=1
 # Make the gcc default to Cortex-M3
-DEFAULT_TO_CORTEX_M3=0
+DEFAULT_TO_CORTEX_M3=1
 
 ##############################################################################
 # Version and download url settings section
@@ -53,6 +50,7 @@ fi
 BINUTILS=binutils-2.20
 NEWLIB=newlib-1.18.0
 GDB=gdb-7.2
+OOCD=master
 LIBCMSIS=v1.10-2
 LIBSTM32=v3.0.0-1
 LIBSTM32USB=v3.0.1-1
@@ -116,11 +114,41 @@ case "$(uname)" in
        ;;
        Darwin)
        echo "Found Darwin OS."
-       GCCFLAGS="${GCCFLAGS} \
-                  --with-gmp=${DARWIN_OPT_PATH} \
+
+       # darwin dependencies
+       DARWINDEPS="gnutar mpfr libmpc gmp"
+  DARWINDEPSCOUNT=4
+
+  GCCFLAGS="${GCCFLAGS} \
+            --with-gmp=${DARWIN_OPT_PATH} \
                  --with-mpfr=${DARWIN_OPT_PATH} \
                  --with-mpc=${DARWIN_OPT_PATH} \
-                 -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+                       -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+
+  echo "Attempting to automatically check if common dependencies are installed on your system"
+  if ! which port > /dev/null; then
+    echo "MacPorts not installed."
+  else
+    pc=`port installed ${DARWINDEPS} | wc -l | tr -d " "`
+    if [ ${pc} -lt $[${DARWINDEPSCOUNT}+1] ];
+    then
+      echo "Something is missing, do you want to install everything needed?"
+      echo "(You need super user rights to do this.)"
+
+      if [ read = "y" || read = "yes" ];
+      then
+        sudo port install ${DARWINDEPS}
+      fi
+    else
+      echo "Found: "${DARWINDEPS}"!"
+    fi
+  fi
+
+  TAR=gnutar
+
+                 --with-libiconv-prefix=${DARWIN_OPT_PATH}"
+       OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
+       OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
        ;;
        CYGWIN*)
        echo "Found CygWin that means Windows most likely."
@@ -191,6 +219,20 @@ fetch ${GCC} ${GCCURL}
 fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+       log "Cloning OpenOCD sources..."
+       git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+        cd openocd-${OOCD}
+       ./bootstrap
+       cd ..
+       tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+        #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+        #    bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+        rm -rf openocd-${OOCD}
+fi
+fi
+
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
        log "Cloning libcmsis sources..."
@@ -359,6 +401,41 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
     rm -rf build/* ${GDB}
 fi
 
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+    unpack openocd-${OOCD}
+    cd build
+    log "Configuring openocd-${OOCD}"
+    CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+    LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+    ../openocd-${OOCD}/configure --enable-maintainer-mode \
+                      --prefix=${PREFIX} \
+                      --enable-dummy \
+                     --enable-parport \
+                     --enable-ft2232_libftdi \
+                     --enable-usb_blaster_libftdi \
+                     --enable-amtjtagaccel \
+                     --enable-zy1000 \
+                     --enable-ep93xx \
+                     --enable-at91rm9200 \
+                     --enable-gw16012 \
+                     --enable-presto_libftdi \
+                     --enable-usbprog \
+                     --enable-jlink \
+                     --enable-vsllink \
+                     --enable-rlink \
+                     --enable-arm-jtag-ew \
+                     --enable-buspirate
+    log "Building openocd-${OOCD}"
+    make ${MAKEFLAGS}
+    install openocd-${OOCD} install
+    cd ..
+    log "Cleaning up openocd-${OOCD}"
+    touch ${STAMPS}/openocd-${OOCD}.build
+    rm -rf build/* ${OOCD}
+fi
+fi
+
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
     unpack libcmsis-${LIBCMSIS}