USE_LINARO=0
# Set to 1 to enable C++
USE_CPP=0
-# Set to 1 to enable building of OpenOCD
-OOCD_EN=0
-# Set to 1 to build libstm32 provided by ST
-LIBSTM32_EN=0
-# Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=0
# Make the gcc default to Cortex-M3
DEFAULT_TO_CORTEX_M3=1
BINUTILS=binutils-2.21
NEWLIB=newlib-1.19.0
GDB=gdb-7.3
-OOCD=master
-LIBCMSIS=v1.10-2
-LIBSTM32=v3.0.0-1
-LIBSTM32USB=v3.0.1-1
-LIBOPENSTM32=master
GMP=gmp-5.0.2
MPFR=mpfr-3.0.1
MPC=mpc-0.9
STAMPS=${SUMMON_DIR}/stamps
-##############################################################################
-# Tool section
-##############################################################################
-TAR=tar
-
##############################################################################
# OS and Tooldetection section
# Detects which tools and flags to use
##############################################################################
-case "$(uname)" in
- Linux)
- echo "Found Linux OS."
- ;;
- Darwin)
- echo "Found Darwin OS."
-
- # darwin dependencies
- DARWINDEPS="wget"
-
- echo "Installing dependencies ..."
- if ! which brew > /dev/null; then
- echo "Homebrew not installed."
- else
- brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
- fi
+# normalized fetching with whatever we can find
+if which fetch > /dev/null; then
+ FETCHCMD="fetch -p"
+elif which wget > /dev/null; then
+ FETCHCMD=wget
+elif which curl > /dev/null; then
+ FETCHCMD="curl -O"
+else
+ FETCHCMD=ftp # the only HTTP client on some BSD
+fi
+if [ USE_LINARO = 1 ]; then
+ if which gnutar > /dev/null; then
TAR=gnutar
-
- OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
- OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
- ;;
- CYGWIN*)
- echo "Found CygWin that means Windows most likely."
- ;;
- *)
- echo "Found unknown OS. Aborting!"
- exit 1
- ;;
-esac
+ elif which gtar > /dev/null; then
+ TAR=gtar
+ else # hopefully it understands the GNU format
+ TAR=tar
+ fi
+else
+ TAR=tar # use the system tar
+fi
##############################################################################
# Building section
fetch() {
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
- wget -c $2
+ ${FETCHCMD} $2
touch ${STAMPS}/$1.fetch
fi
}
}
# Install a build
-install() {
+doinstall() {
log $1
${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
}
fetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2
fetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz
-if [ ${OOCD_EN} != 0 ]; then
-if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
- log "Cloning OpenOCD sources..."
- git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
- cd openocd-${OOCD}
- ./bootstrap
- cd ..
- tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
- #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
- # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
- rm -rf openocd-${OOCD}
-fi
-fi
-
-if [ ${LIBSTM32_EN} != 0 ]; then
-if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
- log "Cloning libcmsis sources..."
- git clone git://git.open-bldc.org/libcmsis.git
- cd libcmsis
- git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
- bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2
- cd ..
- rm -rf libcmsis
-fi
-
-if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
- log "Cloning libstm32 sources..."
- git clone git://git.open-bldc.org/libstm32.git
- cd libstm32
- git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
- bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2
- cd ..
- rm -rf libstm32
-fi
-
-if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
- log "Cloning libstm32usb sources..."
- git clone git://git.open-bldc.org/libstm32usb.git
- cd libstm32usb
- git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
- bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2
- cd ..
- rm -rf libstm32usb
-fi
-fi
-
-if [ ${LIBOPENSTM32_EN} != 0 ]; then
-if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
- log "Cloning libopenstm32 sources..."
- git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
- cd libopenstm32
- git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
- bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
- cd ..
- rm -rf libopenstm32
-fi
-fi
-
cd ${SUMMON_DIR}
if [ ! -e build ]; then
${BINUTILFLAGS}
log "Building ${BINUTILS}"
make ${MAKEFLAGS}
- install ${BINUTILS} install
+ doinstall ${BINUTILS} install
cd ..
log "Cleaning up ${BINUTILS}"
touch ${STAMPS}/${BINUTILS}.build
${GCCFLAGS}
log "Building ${GCC}-boot"
make ${MAKEFLAGS} all-gcc
- install ${GCC}-boot install-gcc
+ doinstall ${GCC}-boot install-gcc
cd ..
log "Cleaning up ${GCC}-boot"
touch ${STAMPS}/${GCC}-boot.build
log "Building ${NEWLIB}"
NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs"
make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}"
- install ${NEWLIB} install
+ doinstall ${NEWLIB} install
cd ..
log "Cleaning up ${NEWLIB}"
touch ${STAMPS}/${NEWLIB}.build
${GCCFLAGS}
log "Building ${GCC}"
make ${MAKEFLAGS}
- install ${GCC} install
+ doinstall ${GCC} install
cd ..
log "Cleaning up ${GCC}"
touch ${STAMPS}/${GCC}.build
${GDBFLAGS}
log "Building ${GDB}"
make ${MAKEFLAGS}
- install ${GDB} install
+ doinstall ${GDB} install
cd ..
log "Cleaning up ${GDB}"
touch ${STAMPS}/${GDB}.build
rm -rf build/* ${GDB}
fi
-if [ ${OOCD_EN} != 0 ]; then
-if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
- unpack openocd-${OOCD}
- cd build
- log "Configuring openocd-${OOCD}"
- CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
- LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
- ../openocd-${OOCD}/configure --enable-maintainer-mode \
- --prefix=${PREFIX} \
- --enable-dummy \
- --enable-parport \
- --enable-ft2232_libftdi \
- --enable-usb_blaster_libftdi \
- --enable-amtjtagaccel \
- --enable-zy1000 \
- --enable-ep93xx \
- --enable-at91rm9200 \
- --enable-gw16012 \
- --enable-presto_libftdi \
- --enable-usbprog \
- --enable-jlink \
- --enable-vsllink \
- --enable-rlink \
- --enable-arm-jtag-ew \
- --enable-buspirate
- log "Building openocd-${OOCD}"
- make ${MAKEFLAGS}
- install openocd-${OOCD} install
- cd ..
- log "Cleaning up openocd-${OOCD}"
- touch ${STAMPS}/openocd-${OOCD}.build
- rm -rf build/* ${OOCD}
-fi
-fi
-
-if [ ${LIBSTM32_EN} != 0 ]; then
-if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
- unpack libcmsis-${LIBCMSIS}
- cd libcmsis-${LIBCMSIS}
- log "Building libcmsis-${LIBCMSIS}"
- make arch_prefix=${TARGET} prefix=${PREFIX}
- install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
- cd ..
- log "Cleaning up libcmsis-${LIBCMSIS}"
- touch ${STAMPS}/libcmsis-${LIBCMSIS}.build
- rm -rf libcmsis-${LIBCMSIS}
-fi
-
-if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then
- unpack libstm32-${LIBSTM32}
- cd libstm32-${LIBSTM32}
- log "Building libstm32-${LIBSTM32}"
- make arch_prefix=${TARGET} prefix=${PREFIX}
- install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
- cd ..
- log "Cleaning up libstm32-${LIBSTM32}"
- touch ${STAMPS}/libstm32-${LIBSTM32}.build
- rm -rf libstm32-${LIBSTM32}
-fi
-
-if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then
- unpack libstm32usb-${LIBSTM32USB}
- cd libstm32usb-${LIBSTM32USB}
- log "Building libstm32usb-${LIBSTM32USB}"
- make arch_prefix=${TARGET} prefix=${PREFIX}
- install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
- cd ..
- log "Cleaning up libstm32usb-${LIBSTM32USB}"
- touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build
- rm -rf libstm32usb-${LIBSTM32USB}
-fi
-fi
-
-if [ $LIBOPENSTM32_EN != 0 ]; then
-if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then
- unpack libopenstm32-${LIBOPENSTM32}
- cd libopenstm32-${LIBOPENSTM32}
- log "Building libopenstm32-${LIBOPENSTM32}"
- make PREFIX=${TARGET} DESTDIR=${PREFIX}
- install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
- cd ..
- log "Cleaning up libopenstm32-${LIBOPENSTM32}"
- touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build
- rm -rf libopenstm32-${LIBOPENSTM32}
-fi
-fi
-
if [ ${SUMMON_DIR_CREATED} = 1 ]; then
log "Removing work directory"
rm -rf ${SUMMON_DIR}
projects / summon-arm-toolchain.git / blobdiff