// 16bit code to handle serial and printer services.
//
-// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net>
+// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2002 MandrakeSoft S.A.
//
-// This file may be distributed under the terms of the GNU GPLv3 license.
+// This file may be distributed under the terms of the GNU LGPLv3 license.
-#include "biosvar.h" // struct bregs
+#include "biosvar.h" // SET_BDA
#include "util.h" // debug_enter
+#include "bregs.h" // struct bregs
/****************************************************************
* COM ports
****************************************************************/
+static u16
+detect_serial(u16 port, u8 timeout, u8 count)
+{
+ outb(0x02, port+SEROFF_IER);
+ u8 ier = inb(port+SEROFF_IER);
+ if (ier != 0x02)
+ return 0;
+ u8 iir = inb(port+SEROFF_IIR);
+ if ((iir & 0x3f) != 0x02)
+ return 0;
+
+ outb(0x00, port+SEROFF_IER);
+ SET_BDA(port_com[count], port);
+ SET_BDA(com_timeout[count], timeout);
+ return 1;
+}
+
+void
+serial_setup(void)
+{
+ if (! CONFIG_SERIAL)
+ return;
+ dprintf(3, "init serial\n");
+
+ u16 count = 0;
+ count += detect_serial(PORT_SERIAL1, 0x0a, count);
+ count += detect_serial(PORT_SERIAL2, 0x0a, count);
+ count += detect_serial(PORT_SERIAL3, 0x0a, count);
+ count += detect_serial(PORT_SERIAL4, 0x0a, count);
+ dprintf(1, "Found %d serial ports\n", count);
+
+ // Equipment word bits 9..11 determing # serial ports
+ u16 eqb = GET_BDA(equipment_list_flags);
+ SET_BDA(equipment_list_flags, (eqb & 0xf1ff) | (count << 9));
+}
+
static u16
getComAddr(struct bregs *regs)
{
if (regs->dx >= 4) {
- set_cf(regs, 1);
+ set_invalid(regs);
return 0;
}
u16 addr = GET_BDA(port_com[regs->dx]);
if (! addr)
- set_cf(regs, 1);
+ set_invalid(regs);
return addr;
}
+// SERIAL - INITIALIZE PORT
static void
handle_1400(struct bregs *regs)
{
u16 addr = getComAddr(regs);
if (!addr)
return;
- outb(inb(addr+3) | 0x80, addr+3);
+ outb(inb(addr+SEROFF_LCR) | 0x80, addr+SEROFF_LCR);
if ((regs->al & 0xE0) == 0) {
- outb(0x17, addr);
- outb(0x04, addr+1);
+ outb(0x17, addr+SEROFF_DLL);
+ outb(0x04, addr+SEROFF_DLH);
} else {
u16 val16 = 0x600 >> ((regs->al & 0xE0) >> 5);
- outb(val16 & 0xFF, addr);
- outb(val16 >> 8, addr+1);
+ outb(val16 & 0xFF, addr+SEROFF_DLL);
+ outb(val16 >> 8, addr+SEROFF_DLH);
}
- outb(regs->al & 0x1F, addr+3);
- regs->ah = inb(addr+5);
- regs->al = inb(addr+6);
- set_cf(regs, 0);
+ outb(regs->al & 0x1F, addr+SEROFF_LCR);
+ regs->ah = inb(addr+SEROFF_LSR);
+ regs->al = inb(addr+SEROFF_MSR);
+ set_success(regs);
}
+// SERIAL - WRITE CHARACTER TO PORT
static void
handle_1401(struct bregs *regs)
{
u16 addr = getComAddr(regs);
if (!addr)
return;
- u16 timer = GET_BDA(timer_counter);
- u16 timeout = GET_BDA(com_timeout[regs->dx]);
- while (((inb(addr+5) & 0x60) != 0x60) && (timeout)) {
- u16 val16 = GET_BDA(timer_counter);
- if (val16 != timer) {
- timer = val16;
- timeout--;
+ u32 end = calc_future_timer_ticks(GET_BDA(com_timeout[regs->dx]));
+ for (;;) {
+ u8 lsr = inb(addr+SEROFF_LSR);
+ if ((lsr & 0x60) == 0x60) {
+ // Success - can write data
+ outb(regs->al, addr+SEROFF_DATA);
+ // XXX - reread lsr?
+ regs->ah = lsr;
+ break;
+ }
+ if (check_timer(end)) {
+ // Timed out - can't write data.
+ regs->ah = lsr | 0x80;
+ break;
}
+ yield();
}
- if (timeout)
- outb(regs->al, addr);
- regs->ah = inb(addr+5);
- if (!timeout)
- regs->ah |= 0x80;
- set_cf(regs, 0);
+ set_success(regs);
}
+// SERIAL - READ CHARACTER FROM PORT
static void
handle_1402(struct bregs *regs)
{
u16 addr = getComAddr(regs);
if (!addr)
return;
- u16 timer = GET_BDA(timer_counter);
- u16 timeout = GET_BDA(com_timeout[regs->dx]);
- while (((inb(addr+5) & 0x01) == 0) && (timeout)) {
- u16 val16 = GET_BDA(timer_counter);
- if (val16 != timer) {
- timer = val16;
- timeout--;
+ u32 end = calc_future_timer_ticks(GET_BDA(com_timeout[regs->dx]));
+ for (;;) {
+ u8 lsr = inb(addr+SEROFF_LSR);
+ if (lsr & 0x01) {
+ // Success - can read data
+ regs->al = inb(addr+SEROFF_DATA);
+ regs->ah = lsr;
+ break;
}
+ if (check_timer(end)) {
+ // Timed out - can't read data.
+ regs->ah = lsr | 0x80;
+ break;
+ }
+ yield();
}
- if (timeout) {
- regs->ah = 0;
- regs->al = inb(addr);
- } else {
- regs->ah = inb(addr+5);
- }
- set_cf(regs, 0);
+ set_success(regs);
}
+// SERIAL - GET PORT STATUS
static void
handle_1403(struct bregs *regs)
{
u16 addr = getComAddr(regs);
if (!addr)
return;
- regs->ah = inb(addr+5);
- regs->al = inb(addr+6);
- set_cf(regs, 0);
+ regs->ah = inb(addr+SEROFF_LSR);
+ regs->al = inb(addr+SEROFF_MSR);
+ set_success(regs);
}
static void
handle_14XX(struct bregs *regs)
{
- // Unsupported
- set_cf(regs, 1);
+ set_unimplemented(regs);
}
// INT 14h Serial Communications Service Entry Point
-void VISIBLE
+void VISIBLE16
handle_14(struct bregs *regs)
{
- debug_enter(regs);
-
- irq_enable();
+ debug_enter(regs, DEBUG_HDL_14);
+ if (! CONFIG_SERIAL) {
+ handle_14XX(regs);
+ return;
+ }
switch (regs->ah) {
case 0x00: handle_1400(regs); break;
case 0x03: handle_1403(regs); break;
default: handle_14XX(regs); break;
}
- debug_exit(regs);
}
+// XXX - Baud Rate Generator Table
+u8 BaudTable[16] VAR16FIXED(0xe729);
+
/****************************************************************
* LPT ports
****************************************************************/
+static u16
+detect_parport(u16 port, u8 timeout, u8 count)
+{
+ // clear input mode
+ outb(inb(port+2) & 0xdf, port+2);
+
+ outb(0xaa, port);
+ if (inb(port) != 0xaa)
+ // Not present
+ return 0;
+ SET_BDA(port_lpt[count], port);
+ SET_BDA(lpt_timeout[count], timeout);
+ return 1;
+}
+
+void
+lpt_setup(void)
+{
+ if (! CONFIG_LPT)
+ return;
+ dprintf(3, "init lpt\n");
+
+ u16 count = 0;
+ count += detect_parport(PORT_LPT1, 0x14, count);
+ count += detect_parport(PORT_LPT2, 0x14, count);
+ dprintf(1, "Found %d lpt ports\n", count);
+
+ // Equipment word bits 14..15 determing # parallel ports
+ u16 eqb = GET_BDA(equipment_list_flags);
+ SET_BDA(equipment_list_flags, (eqb & 0x3fff) | (count << 14));
+}
+
static u16
getLptAddr(struct bregs *regs)
{
if (regs->dx >= 3) {
- set_cf(regs, 1);
+ set_invalid(regs);
return 0;
}
u16 addr = GET_BDA(port_lpt[regs->dx]);
if (! addr)
- set_cf(regs, 1);
+ set_invalid(regs);
return addr;
}
-static void
-lpt_ret(struct bregs *regs, u16 addr, u16 timeout)
-{
- u8 val8 = inb(addr+1);
- regs->ah = (val8 ^ 0x48);
- if (!timeout)
- regs->ah |= 0x01;
- set_cf(regs, 0);
-}
-
// INT 17 - PRINTER - WRITE CHARACTER
static void
handle_1700(struct bregs *regs)
u16 addr = getLptAddr(regs);
if (!addr)
return;
- u16 timeout = GET_BDA(lpt_timeout[regs->dx]) << 8;
+
+ u32 end = calc_future_timer_ticks(GET_BDA(lpt_timeout[regs->dx]));
outb(regs->al, addr);
u8 val8 = inb(addr+2);
outb(val8 | 0x01, addr+2); // send strobe
- nop();
+ udelay(5);
outb(val8 & ~0x01, addr+2);
- while (((inb(addr+1) & 0x40) == 0x40) && (timeout))
- timeout--;
- lpt_ret(regs, addr, timeout);
+ for (;;) {
+ u8 v = inb(addr+1);
+ if (!(v & 0x40)) {
+ // Success
+ regs->ah = v ^ 0x48;
+ break;
+ }
+ if (check_timer(end)) {
+ // Timeout
+ regs->ah = (v ^ 0x48) | 0x01;
+ break;
+ }
+ yield();
+ }
+
+ set_success(regs);
}
// INT 17 - PRINTER - INITIALIZE PORT
u16 addr = getLptAddr(regs);
if (!addr)
return;
- u16 timeout = GET_BDA(lpt_timeout[regs->dx]) << 8;
u8 val8 = inb(addr+2);
outb(val8 & ~0x04, addr+2); // send init
- nop();
+ udelay(5);
outb(val8 | 0x04, addr+2);
- lpt_ret(regs, addr, timeout);
+ regs->ah = inb(addr+1) ^ 0x48;
+ set_success(regs);
}
// INT 17 - PRINTER - GET STATUS
u16 addr = getLptAddr(regs);
if (!addr)
return;
- u16 timeout = GET_BDA(lpt_timeout[regs->dx]) << 8;
-
- lpt_ret(regs, addr, timeout);
+ regs->ah = inb(addr+1) ^ 0x48;
+ set_success(regs);
}
static void
handle_17XX(struct bregs *regs)
{
- // Unsupported
- set_cf(regs, 1);
+ set_unimplemented(regs);
}
// INT17h : Printer Service Entry Point
-void VISIBLE
+void VISIBLE16
handle_17(struct bregs *regs)
{
- debug_enter(regs);
-
- irq_enable();
+ debug_enter(regs, DEBUG_HDL_17);
+ if (! CONFIG_LPT) {
+ handle_17XX(regs);
+ return;
+ }
switch (regs->ah) {
case 0x00: handle_1700(regs); break;
case 0x02: handle_1702(regs); break;
default: handle_17XX(regs); break;
}
- debug_exit(regs);
}
projects / seabios.git / blobdiff