#ifndef __CONFIG_H
#define __CONFIG_H
-// Configuration definitions.
-
-/* Dont support QEMU BIOS by default.
- * Change CONFIG_QEMU to 1 to support QEMU. */
-#define CONFIG_QEMU 0
-
-#if (QEMU_SUPPORT == 1)
-#define CONFIG_APPNAME "QEMU"
-#else
-#define CONFIG_APPNAME "Bochs"
-#endif
-
-// Configure as a coreboot payload.
-#define CONFIG_COREBOOT 0
-
-// Control how verbose debug output is.
-#define CONFIG_DEBUG_LEVEL 1
-
-// Send debugging information to serial port
-#define CONFIG_DEBUG_SERIAL 0
-
-// Support for int13 floppy drive access
-#define CONFIG_FLOPPY_SUPPORT 1
-// Support for int15c2 mouse calls
-#define CONFIG_PS2_MOUSE 1
-// Support for IDE disk code
-#define CONFIG_ATA 1
-// Support calling int155f on each keyboard press
-#define CONFIG_KBD_CALL_INT15_4F 1
-// Support for booting from a CD
-#define CONFIG_CDROM_BOOT 1
-// Support for emulating a boot CD as a floppy/harddrive
-#define CONFIG_CDROM_EMU 1
-// Support int 1a/b1 PCI BIOS calls
-#define CONFIG_PCIBIOS 1
-// Support int 15/53 APM BIOS calls
-#define CONFIG_APMBIOS 1
-// Support int 19/18 system bootup support
-#define CONFIG_BOOT 1
-// Support int 14 parallel port calls
-#define CONFIG_SERIAL 1
-// Support int 17 parallel port calls
-#define CONFIG_LPT 1
-// Support int 16 keyboard calls
-#define CONFIG_KEYBOARD 1
-// Support finding and running option roms during post.
-#define CONFIG_OPTIONROMS 1
-// Support an interactive boot menu at end of post.
-#define CONFIG_BOOTMENU 1
+#include "autoconf.h"
-// Support generation of a PIR table in 0xf000 segment (for emulators)
-#define CONFIG_PIRTABLE 1
-// Support generation of MPTable (for emulators)
-#define CONFIG_MPTABLE 1
-// Support generation of ACPI tables (for emulators)
-#define CONFIG_ACPI 1
-// Support bios callbacks specific to via vgabios.
-#define CONFIG_VGAHOOKS 1
-
-/* define it if the (emulated) hardware supports SMM mode */
-#define CONFIG_USE_SMM 1
-
-#define CONFIG_MAX_ATA_INTERFACES 4
-#define CONFIG_MAX_ATA_DEVICES (CONFIG_MAX_ATA_INTERFACES*2)
+// Configuration definitions.
-#define CONFIG_ACPI_DATA_SIZE 0x00010000L
+//#define CONFIG_APPNAME "QEMU"
+//#define CONFIG_CPUNAME8 "QEMUCPU "
+//#define CONFIG_APPNAME6 "QEMU "
+//#define CONFIG_APPNAME4 "QEMU"
+#define CONFIG_APPNAME "Bochs"
+#define CONFIG_CPUNAME8 "BOCHSCPU"
+#define CONFIG_APPNAME6 "BOCHS "
+#define CONFIG_APPNAME4 "BXPC"
+
+// Maximum number of map entries in the e820 map
+#define CONFIG_MAX_E820 32
+// Space to reserve in f-segment for dynamic allocations
+#define CONFIG_MAX_BIOSTABLE 2048
+// Space to reserve in high-memory for tables
+#define CONFIG_MAX_HIGHTABLE (64*1024)
+// Largest supported externaly facing drive id
+#define CONFIG_MAX_EXTDRIVE 16
+// Number of bytes the smbios may be and still live in the f-segment
+#define BUILD_MAX_SMBIOS_FSEG 600
#define CONFIG_MODEL_ID 0xFC
#define CONFIG_SUBMODEL_ID 0x00
#define CONFIG_BIOS_REVISION 0x01
// Various memory addresses used by the code.
-#define BUILD_STACK_ADDR 0xfffe
-#define BUILD_CPU_COUNT_ADDR 0xf000
-#define BUILD_AP_BOOT_ADDR 0x10000
-#define BUILD_BSS_ADDR 0x40000
-#define BUILD_BIOS_ADDR 0xf0000
-#define BUILD_BIOS_SIZE 0x10000
- /* 64 KB used to copy the BIOS to shadow RAM */
-#define BUILD_BIOS_TMP_ADDR 0x30000
-
-#define BUILD_PM_IO_BASE 0xb000
-#define BUILD_SMB_IO_BASE 0xb100
-#define BUILD_SMI_CMD_IO_ADDR 0xb2
-
-// Start of fixed addresses in 0xf0000 segment.
-#define BUILD_START_FIXED 0xe050
-
-// Important 16-bit segments
+#define BUILD_STACK_ADDR 0x7000
+#define BUILD_S3RESUME_STACK_ADDR 0x1000
+#define BUILD_AP_BOOT_ADDR 0x10000
+#define BUILD_EBDA_MINIMUM 0x90000
+#define BUILD_LOWRAM_END 0xa0000
+#define BUILD_ROM_START 0xc0000
+#define BUILD_BIOS_ADDR 0xf0000
+#define BUILD_BIOS_SIZE 0x10000
+// 32KB for shadow ram copying (works around emulator deficiencies)
+#define BUILD_BIOS_TMP_ADDR 0x30000
+#define BUILD_SMM_INIT_ADDR 0x38000
+#define BUILD_SMM_ADDR 0xa8000
+#define BUILD_SMM_SIZE 0x8000
+#define BUILD_MAX_HIGHMEM 0xe0000000
+
+#define BUILD_PCIMEM_START 0xe0000000
+#define BUILD_PCIMEM_END 0xfec00000 /* IOAPIC is mapped at */
+
+#define BUILD_IOAPIC_ADDR 0xfec00000
+#define BUILD_HPET_ADDRESS 0xfed00000
+#define BUILD_APIC_ADDR 0xfee00000
+
+// Important real-mode segments
+#define SEG_IVT 0x0000
+#define SEG_BDA 0x0040
#define SEG_BIOS 0xf000
-#define SEG_EBDA 0x9fc0
-#define SEG_BDA 0x0000
+
+// Segment definitions in protected mode (see rombios32_gdt in misc.c)
+#define SEG32_MODE32_CS (1 << 3)
+#define SEG32_MODE32_DS (2 << 3)
+#define SEG32_MODE16_CS (3 << 3)
+#define SEG32_MODE16_DS (4 << 3)
+#define SEG32_MODE16BIG_CS (5 << 3)
+#define SEG32_MODE16BIG_DS (6 << 3)
// Debugging levels. If non-zero and CONFIG_DEBUG_LEVEL is greater
// than the specified value, then the corresponding irq handler will
// report every enter event.
-#define DEBUG_ISR_nmi 1
+#define DEBUG_ISR_02 1
#define DEBUG_HDL_05 1
#define DEBUG_ISR_08 20
#define DEBUG_ISR_09 9
#define DEBUG_ISR_0e 9
#define DEBUG_HDL_10 20
-#define DEBUG_HDL_11 1
-#define DEBUG_HDL_12 1
+#define DEBUG_HDL_11 2
+#define DEBUG_HDL_12 2
#define DEBUG_HDL_13 10
-#define DEBUG_HDL_14 1
+#define DEBUG_HDL_14 2
#define DEBUG_HDL_15 9
#define DEBUG_HDL_16 9
-#define DEBUG_HDL_17 1
+#define DEBUG_HDL_17 2
#define DEBUG_HDL_18 1
#define DEBUG_HDL_19 1
#define DEBUG_HDL_1a 9
-#define DEBUG_ISR_1c 20
#define DEBUG_HDL_40 1
#define DEBUG_ISR_70 9
#define DEBUG_ISR_74 9
#define DEBUG_ISR_75 1
#define DEBUG_ISR_76 10
-#define DEBUG_ISR_hwirq 30
+#define DEBUG_ISR_hwpic1 5
+#define DEBUG_ISR_hwpic2 5
+#define DEBUG_HDL_pnp 1
+#define DEBUG_HDL_pmm 1
+#define DEBUG_HDL_pcibios32 9
+#define DEBUG_HDL_apm 9
+
+#define DEBUG_unimplemented 2
+#define DEBUG_invalid 3
+#define DEBUG_thread 2
#endif // config.h
projects / seabios.git / blobdiff