#include "cmos.h" // inb_cmos
#include "pic.h" // enable_hwirq
#include "biosvar.h" // GET_EBDA
-#include "pci.h" // pci_find_class
+#include "pci.h" // foreachpci
#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER
#include "pci_regs.h" // PCI_INTERRUPT_LINE
-#include "boot.h" // add_bcv_hd
+#include "boot.h" // boot_add_hd
#include "disk.h" // struct ata_s
#include "ata.h" // ATA_CB_STAT
-
-#define IDE_SECTOR_SIZE 512
-#define CDROM_SECTOR_SIZE 2048
+#include "blockcmd.h" // CDB_CMD_READ_10
#define IDE_TIMEOUT 32000 //32 seconds max for IDE ops
-struct ata_channel_s ATA_channels[CONFIG_MAX_ATA_INTERFACES] VAR16_32;
-
/****************************************************************
* Helper functions
u8 status = inb(base+ATA_CB_STAT);
if ((status & mask) == flags)
return status;
- if (rdtscll() > end) {
- dprintf(1, "IDE time out\n");
+ if (check_tsc(end)) {
+ warn_timeout();
return -1;
}
+ yield();
}
}
// Reset a drive
static void
-ata_reset(int driveid)
+ata_reset(struct atadrive_s *adrive_g)
{
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u8 slave = ataid % 2;
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
- u16 iobase2 = GET_GLOBAL(ATA_channels[channel].iobase2);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u8 slave = GET_GLOBAL(adrive_g->slave);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
- dprintf(6, "ata_reset driveid=%d\n", driveid);
+ dprintf(6, "ata_reset drive=%p\n", &adrive_g->drive);
// Pulse SRST
outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC);
udelay(5);
outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC);
- mdelay(2);
+ msleep(2);
// wait for device to become not busy.
int status = await_not_bsy(iobase1);
if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1)
break;
// Change drive request failed to take effect - retry.
- if (rdtscll() > end) {
- dprintf(1, "ata_reset slave time out\n");
+ if (check_tsc(end)) {
+ warn_timeout();
goto done;
}
}
+ } else {
+ // QEMU doesn't reset dh on reset, so set it explicitly.
+ outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH);
}
// On a user-reset request, wait for RDY if it is an ATA device.
- u8 type=GET_GLOBAL(Drives.drives[driveid].type);
+ u8 type=GET_GLOBAL(adrive_g->drive.type);
if (type == DTYPE_ATA)
status = await_rdy(iobase1);
dprintf(6, "ata_reset exit status=%x\n", status);
}
+// Check for drive RDY for 16bit interface command.
static int
-isready(int driveid)
+isready(struct atadrive_s *adrive_g)
{
// Read the status from controller
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
u8 status = inb(iobase1 + ATA_CB_STAT);
if ((status & (ATA_CB_STAT_BSY|ATA_CB_STAT_RDY)) == ATA_CB_STAT_RDY)
return DISK_RET_SUCCESS;
return DISK_RET_ENOTREADY;
}
+// Default 16bit command demuxer for ATA and ATAPI devices.
static int
process_ata_misc_op(struct disk_op_s *op)
{
if (!CONFIG_ATA)
return 0;
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
switch (op->command) {
case CMD_RESET:
- ata_reset(op->driveid);
+ ata_reset(adrive_g);
return DISK_RET_SUCCESS;
case CMD_ISREADY:
- return isready(op->driveid);
+ return isready(adrive_g);
case CMD_FORMAT:
case CMD_VERIFY:
case CMD_SEEK:
u8 device;
u8 command;
+ u8 feature2;
u8 sector_count2;
u8 lba_low2;
u8 lba_mid2;
// Send an ata command to the drive.
static int
-send_cmd(int driveid, struct ata_pio_command *cmd)
+send_cmd(struct atadrive_s *adrive_g, struct ata_pio_command *cmd)
{
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u8 slave = ataid % 2;
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
- u16 iobase2 = GET_GLOBAL(ATA_channels[channel].iobase2);
-
- // Disable interrupts
- outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u8 slave = GET_GLOBAL(adrive_g->slave);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
// Select device
int status = await_not_bsy(iobase1);
return status;
}
- if (cmd->command & 0x04) {
- outb(0x00, iobase1 + ATA_CB_FR);
+ // Check for ATA_CMD_(READ|WRITE)_(SECTORS|DMA)_EXT commands.
+ if ((cmd->command & ~0x11) == ATA_CMD_READ_SECTORS_EXT) {
+ outb(cmd->feature2, iobase1 + ATA_CB_FR);
outb(cmd->sector_count2, iobase1 + ATA_CB_SC);
outb(cmd->lba_low2, iobase1 + ATA_CB_SN);
outb(cmd->lba_mid2, iobase1 + ATA_CB_CL);
outb(cmd->lba_high, iobase1 + ATA_CB_CH);
outb(cmd->command, iobase1 + ATA_CB_CMD);
- status = ndelay_await_not_bsy(iobase1);
+ return 0;
+}
+
+// Wait for data after calling 'send_cmd'.
+static int
+ata_wait_data(u16 iobase1)
+{
+ int status = ndelay_await_not_bsy(iobase1);
if (status < 0)
return status;
return 0;
}
+// Send an ata command that does not transfer any further data.
+int
+ata_cmd_nondata(struct atadrive_s *adrive_g, struct ata_pio_command *cmd)
+{
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_g, cmd);
+ if (ret)
+ goto fail;
+ ret = ndelay_await_not_bsy(iobase1);
+ if (ret < 0)
+ goto fail;
+
+ if (ret & ATA_CB_STAT_ERR) {
+ dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n"
+ , ret, inb(iobase1 + ATA_CB_ERR));
+ ret = -4;
+ goto fail;
+ }
+ if (ret & ATA_CB_STAT_DRQ) {
+ dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret);
+ ret = -5;
+ goto fail;
+ }
+
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+
+ return ret;
+}
+
/****************************************************************
- * ATA transfers
+ * ATA PIO transfers
****************************************************************/
// Transfer 'op->count' blocks (of 'blocksize' bytes) to/from drive
-// 'op->driveid'.
+// 'op->drive_g'.
static int
-ata_transfer(struct disk_op_s *op, int iswrite, int blocksize)
+ata_pio_transfer(struct disk_op_s *op, int iswrite, int blocksize)
{
- dprintf(16, "ata_transfer id=%d write=%d count=%d bs=%d buf=%p\n"
- , op->driveid, iswrite, op->count, blocksize, op->buf_fl);
-
- u8 ataid = GET_GLOBAL(Drives.drives[op->driveid].cntl_id);
- u8 channel = ataid / 2;
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
- u16 iobase2 = GET_GLOBAL(ATA_channels[channel].iobase2);
+ dprintf(16, "ata_pio_transfer id=%p write=%d count=%d bs=%d buf=%p\n"
+ , op->drive_g, iswrite, op->count, blocksize, op->buf_fl);
+
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
int count = op->count;
void *buf_fl = op->buf_fl;
int status;
for (;;) {
if (iswrite) {
// Write data to controller
- dprintf(16, "Write sector id=%d dest=%p\n", op->driveid, buf_fl);
+ dprintf(16, "Write sector id=%p dest=%p\n", op->drive_g, buf_fl);
if (CONFIG_ATA_PIO32)
outsl_fl(iobase1, buf_fl, blocksize / 4);
else
outsw_fl(iobase1, buf_fl, blocksize / 2);
} else {
// Read data from controller
- dprintf(16, "Read sector id=%d dest=%p\n", op->driveid, buf_fl);
+ dprintf(16, "Read sector id=%p dest=%p\n", op->drive_g, buf_fl);
if (CONFIG_ATA_PIO32)
insl_fl(iobase1, buf_fl, blocksize / 4);
else
break;
status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR);
if (status != ATA_CB_STAT_DRQ) {
- dprintf(6, "ata_transfer : more sectors left (status %02x)\n"
+ dprintf(6, "ata_pio_transfer : more sectors left (status %02x)\n"
, status);
op->count -= count;
return -6;
if (!iswrite)
status &= ~ATA_CB_STAT_DF;
if (status != 0) {
- dprintf(6, "ata_transfer : no sectors left (status %02x)\n", status);
+ dprintf(6, "ata_pio_transfer : no sectors left (status %02x)\n", status);
return -7;
}
- // Enable interrupts
- outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
return 0;
}
+/****************************************************************
+ * ATA DMA transfers
+ ****************************************************************/
+
+#define BM_CMD 0
+#define BM_CMD_MEMWRITE 0x08
+#define BM_CMD_START 0x01
+#define BM_STATUS 2
+#define BM_STATUS_IRQ 0x04
+#define BM_STATUS_ERROR 0x02
+#define BM_STATUS_ACTIVE 0x01
+#define BM_TABLE 4
+
+struct sff_dma_prd {
+ u32 buf_fl;
+ u32 count;
+};
+
+// Check if DMA available and setup transfer if so.
+static int
+ata_try_dma(struct disk_op_s *op, int iswrite, int blocksize)
+{
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ u32 dest = (u32)op->buf_fl;
+ if (dest & 1)
+ // Need minimum alignment of 1.
+ return -1;
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster);
+ if (! iomaster)
+ return -1;
+ u32 bytes = op->count * blocksize;
+ if (! bytes)
+ return -1;
+
+ // Build PRD dma structure.
+ struct sff_dma_prd *dma = MAKE_FLATPTR(
+ get_ebda_seg()
+ , (void*)offsetof(struct extended_bios_data_area_s, extra_stack));
+ struct sff_dma_prd *origdma = dma;
+ while (bytes) {
+ if (dma >= &origdma[16])
+ // Too many descriptors..
+ return -1;
+ u32 count = bytes;
+ u32 max = 0x10000 - (dest & 0xffff);
+ if (count > max)
+ count = max;
+
+ SET_FLATPTR(dma->buf_fl, dest);
+ bytes -= count;
+ if (!bytes)
+ // Last descriptor.
+ count |= 1<<31;
+ dprintf(16, "dma@%p: %08x %08x\n", dma, dest, count);
+ dest += count;
+ SET_FLATPTR(dma->count, count);
+ dma++;
+ }
+
+ // Program bus-master controller.
+ outl((u32)origdma, iomaster + BM_TABLE);
+ u8 oldcmd = inb(iomaster + BM_CMD) & ~(BM_CMD_MEMWRITE|BM_CMD_START);
+ outb(oldcmd | (iswrite ? 0x00 : BM_CMD_MEMWRITE), iomaster + BM_CMD);
+ outb(BM_STATUS_ERROR|BM_STATUS_IRQ, iomaster + BM_STATUS);
+
+ return 0;
+}
+
+// Transfer data using DMA.
+static int
+ata_dma_transfer(struct disk_op_s *op)
+{
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ dprintf(16, "ata_dma_transfer id=%p buf=%p\n", op->drive_g, op->buf_fl);
+
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster);
+
+ // Start bus-master controller.
+ u8 oldcmd = inb(iomaster + BM_CMD);
+ outb(oldcmd | BM_CMD_START, iomaster + BM_CMD);
+
+ u64 end = calc_future_tsc(IDE_TIMEOUT);
+ u8 status;
+ for (;;) {
+ status = inb(iomaster + BM_STATUS);
+ if (status & BM_STATUS_IRQ)
+ break;
+ // Transfer in progress
+ if (check_tsc(end)) {
+ // Timeout.
+ warn_timeout();
+ break;
+ }
+ yield();
+ }
+ outb(oldcmd & ~BM_CMD_START, iomaster + BM_CMD);
+
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+ int idestatus = pause_await_not_bsy(iobase1, iobase2);
+
+ if ((status & (BM_STATUS_IRQ|BM_STATUS_ACTIVE)) == BM_STATUS_IRQ
+ && idestatus >= 0x00
+ && (idestatus & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ
+ | ATA_CB_STAT_ERR)) == 0x00)
+ // Success.
+ return 0;
+
+ dprintf(6, "IDE DMA error (dma=%x ide=%x/%x/%x)\n", status, idestatus
+ , inb(iobase2 + ATA_CB_ASTAT), inb(iobase1 + ATA_CB_ERR));
+ op->count = 0;
+ return -1;
+}
+
+
/****************************************************************
* ATA hard drive functions
****************************************************************/
+// Transfer data to harddrive using PIO protocol.
+static int
+ata_pio_cmd_data(struct disk_op_s *op, int iswrite, struct ata_pio_command *cmd)
+{
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_g, cmd);
+ if (ret)
+ goto fail;
+ ret = ata_wait_data(iobase1);
+ if (ret)
+ goto fail;
+ ret = ata_pio_transfer(op, iswrite, DISK_SECTOR_SIZE);
+
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+ return ret;
+}
+
+// Transfer data to harddrive using DMA protocol.
+static int
+ata_dma_cmd_data(struct disk_op_s *op, struct ata_pio_command *cmd)
+{
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ int ret = send_cmd(adrive_g, cmd);
+ if (ret)
+ return ret;
+ return ata_dma_transfer(op);
+}
+
// Read/write count blocks from a harddrive.
static int
-ata_cmd_data(struct disk_op_s *op, int iswrite, int command)
+ata_readwrite(struct disk_op_s *op, int iswrite)
{
u64 lba = op->lba;
+ int usepio = ata_try_dma(op, iswrite, DISK_SECTOR_SIZE);
+
struct ata_pio_command cmd;
memset(&cmd, 0, sizeof(cmd));
- cmd.command = command;
if (op->count >= (1<<8) || lba + op->count >= (1<<28)) {
cmd.sector_count2 = op->count >> 8;
cmd.lba_low2 = lba >> 24;
cmd.lba_mid2 = lba >> 32;
cmd.lba_high2 = lba >> 40;
-
- cmd.command |= 0x04;
lba &= 0xffffff;
+
+ if (usepio)
+ cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS_EXT
+ : ATA_CMD_READ_SECTORS_EXT);
+ else
+ cmd.command = (iswrite ? ATA_CMD_WRITE_DMA_EXT
+ : ATA_CMD_READ_DMA_EXT);
+ } else {
+ if (usepio)
+ cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS
+ : ATA_CMD_READ_SECTORS);
+ else
+ cmd.command = (iswrite ? ATA_CMD_WRITE_DMA
+ : ATA_CMD_READ_DMA);
}
- cmd.feature = 0;
cmd.sector_count = op->count;
cmd.lba_low = lba;
cmd.lba_mid = lba >> 8;
cmd.lba_high = lba >> 16;
cmd.device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA;
- int ret = send_cmd(op->driveid, &cmd);
+ int ret;
+ if (usepio)
+ ret = ata_pio_cmd_data(op, iswrite, &cmd);
+ else
+ ret = ata_dma_cmd_data(op, &cmd);
if (ret)
- return ret;
- return ata_transfer(op, iswrite, IDE_SECTOR_SIZE);
+ return DISK_RET_EBADTRACK;
+ return DISK_RET_SUCCESS;
}
+// 16bit command demuxer for ATA harddrives.
int
process_ata_op(struct disk_op_s *op)
{
if (!CONFIG_ATA)
return 0;
- int ret;
switch (op->command) {
case CMD_READ:
- ret = ata_cmd_data(op, 0, ATA_CMD_READ_SECTORS);
- break;
+ return ata_readwrite(op, 0);
case CMD_WRITE:
- ret = ata_cmd_data(op, 1, ATA_CMD_WRITE_SECTORS);
- break;
+ return ata_readwrite(op, 1);
default:
return process_ata_misc_op(op);
}
- if (ret)
- return DISK_RET_EBADTRACK;
- return DISK_RET_SUCCESS;
}
* ATAPI functions
****************************************************************/
+#define CDROM_CDB_SIZE 12
+
// Low-level atapi command transmit function.
-static int
-send_atapi_cmd(int driveid, u8 *cmdbuf, u8 cmdlen, u16 blocksize)
+int
+atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
{
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
- u16 iobase2 = GET_GLOBAL(ATA_channels[channel].iobase2);
+ if (! CONFIG_ATA)
+ return 0;
+
+ struct atadrive_s *adrive_g = container_of(
+ op->drive_g, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
struct ata_pio_command cmd;
- cmd.sector_count = 0;
- cmd.feature = 0;
- cmd.lba_low = 0;
+ memset(&cmd, 0, sizeof(cmd));
cmd.lba_mid = blocksize;
cmd.lba_high = blocksize >> 8;
- cmd.device = 0;
cmd.command = ATA_CMD_PACKET;
- int ret = send_cmd(driveid, &cmd);
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_g, &cmd);
if (ret)
- return ret;
+ goto fail;
+ ret = ata_wait_data(iobase1);
+ if (ret)
+ goto fail;
// Send command to device
- outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cmdbuf), cmdlen / 2);
+ outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2);
int status = pause_await_not_bsy(iobase1, iobase2);
- if (status < 0)
- return status;
+ if (status < 0) {
+ ret = status;
+ goto fail;
+ }
if (status & ATA_CB_STAT_ERR) {
u8 err = inb(iobase1 + ATA_CB_ERR);
if (err != 0x20)
dprintf(6, "send_atapi_cmd : read error (status=%02x err=%02x)\n"
, status, err);
- return -2;
+ ret = -2;
+ goto fail;
}
if (!(status & ATA_CB_STAT_DRQ)) {
dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status);
- return -3;
+ ret = -3;
+ goto fail;
}
- return 0;
-}
+ ret = ata_pio_transfer(op, 0, blocksize);
-// Read sectors from the cdrom.
-int
-cdrom_read(struct disk_op_s *op)
-{
- u8 atacmd[12];
- memset(atacmd, 0, sizeof(atacmd));
- atacmd[0]=0x28; // READ command
- atacmd[7]=(op->count & 0xff00) >> 8; // Sectors
- atacmd[8]=(op->count & 0x00ff);
- atacmd[2]=(op->lba & 0xff000000) >> 24; // LBA
- atacmd[3]=(op->lba & 0x00ff0000) >> 16;
- atacmd[4]=(op->lba & 0x0000ff00) >> 8;
- atacmd[5]=(op->lba & 0x000000ff);
-
- int ret = send_atapi_cmd(op->driveid, atacmd, sizeof(atacmd)
- , CDROM_SECTOR_SIZE);
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
if (ret)
- return ret;
-
- return ata_transfer(op, 0, CDROM_SECTOR_SIZE);
+ return DISK_RET_EBADTRACK;
+ return DISK_RET_SUCCESS;
}
+// 16bit command demuxer for ATAPI cdroms.
int
process_atapi_op(struct disk_op_s *op)
{
- int ret;
+ if (!CONFIG_ATA)
+ return 0;
switch (op->command) {
case CMD_READ:
- ret = cdrom_read(op);
- break;
+ return cdb_read(op);
case CMD_FORMAT:
case CMD_WRITE:
return DISK_RET_EWRITEPROTECT;
default:
return process_ata_misc_op(op);
}
- if (ret)
- return DISK_RET_EBADTRACK;
- return DISK_RET_SUCCESS;
}
-// Send a simple atapi command to a drive.
-int
-ata_cmd_packet(int driveid, u8 *cmdbuf, u8 cmdlen
- , u32 length, void *buf_fl)
+
+/****************************************************************
+ * ATA detect and init
+ ****************************************************************/
+
+// Send an identify device or identify device packet command.
+static int
+send_ata_identity(struct atadrive_s *adrive_g, u16 *buffer, int command)
{
- int ret = send_atapi_cmd(driveid, cmdbuf, cmdlen, length);
- if (ret)
- return ret;
+ memset(buffer, 0, DISK_SECTOR_SIZE);
struct disk_op_s dop;
memset(&dop, 0, sizeof(dop));
- dop.driveid = driveid;
+ dop.drive_g = &adrive_g->drive;
dop.count = 1;
- dop.buf_fl = buf_fl;
-
- return ata_transfer(&dop, 0, length);
-}
+ dop.lba = 1;
+ dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer);
+ struct ata_pio_command cmd;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.command = command;
-/****************************************************************
- * ATA detect and init
- ****************************************************************/
+ return ata_pio_cmd_data(&dop, 0, &cmd);
+}
// Extract the ATA/ATAPI version info.
-static int
-extract_version(u16 *buffer)
+int
+ata_extract_version(u16 *buffer)
{
// Extract ATA/ATAPI version.
u16 ataversion = buffer[80];
return version;
}
-// Extract common information from IDENTIFY commands.
-static void
-extract_identify(int driveid, u16 *buffer)
-{
- dprintf(3, "Identify w0=%x w2=%x\n", buffer[0], buffer[2]);
+#define MAXMODEL 40
+// Extract the ATA/ATAPI model info.
+char *
+ata_extract_model(char *model, u32 size, u16 *buffer)
+{
// Read model name
- char *model = Drives.drives[driveid].model;
- int maxsize = ARRAY_SIZE(Drives.drives[driveid].model);
int i;
- for (i=0; i<maxsize/2; i++) {
- u16 v = buffer[27+i];
- model[i*2] = v >> 8;
- model[i*2+1] = v & 0xff;
- }
- model[maxsize-1] = 0x00;
-
- // Trim trailing spaces from model name.
- for (i=maxsize-2; i>0 && model[i] == 0x20; i--)
- model[i] = 0x00;
+ for (i=0; i<size/2; i++)
+ *(u16*)&model[i*2] = ntohs(buffer[27+i]);
+ model[size] = 0x00;
+ nullTrailingSpace(model);
+ return model;
+}
- // Common flags.
- SET_GLOBAL(Drives.drives[driveid].removable, (buffer[0] & 0x80) ? 1 : 0);
+// Common init code between ata and atapi
+static struct atadrive_s *
+init_atadrive(struct atadrive_s *dummy, u16 *buffer)
+{
+ struct atadrive_s *adrive_g = malloc_fseg(sizeof(*adrive_g));
+ if (!adrive_g) {
+ warn_noalloc();
+ return NULL;
+ }
+ memset(adrive_g, 0, sizeof(*adrive_g));
+ adrive_g->chan_gf = dummy->chan_gf;
+ adrive_g->slave = dummy->slave;
+ adrive_g->drive.cntl_id = adrive_g->chan_gf->chanid * 2 + dummy->slave;
+ adrive_g->drive.removable = (buffer[0] & 0x80) ? 1 : 0;
+ return adrive_g;
}
-static int
-init_drive_atapi(int driveid, u16 *buffer)
+// Detect if the given drive is an atapi - initialize it if so.
+static struct atadrive_s *
+init_drive_atapi(struct atadrive_s *dummy, u16 *buffer)
{
// Send an IDENTIFY_DEVICE_PACKET command to device
- memset(buffer, 0, IDE_SECTOR_SIZE);
- struct disk_op_s dop;
- memset(&dop, 0, sizeof(dop));
- dop.driveid = driveid;
- dop.count = 1;
- dop.lba = 1;
- dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer);
- int ret = ata_cmd_data(&dop, 0, ATA_CMD_IDENTIFY_DEVICE_PACKET);
+ int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_PACKET_DEVICE);
if (ret)
- return ret;
+ return NULL;
// Success - setup as ATAPI.
- extract_identify(driveid, buffer);
- SET_GLOBAL(Drives.drives[driveid].type, DTYPE_ATAPI);
- SET_GLOBAL(Drives.drives[driveid].blksize, CDROM_SECTOR_SIZE);
- SET_GLOBAL(Drives.drives[driveid].sectors, (u64)-1);
+ struct atadrive_s *adrive_g = init_atadrive(dummy, buffer);
+ if (!adrive_g)
+ return NULL;
+ adrive_g->drive.type = DTYPE_ATAPI;
+ adrive_g->drive.blksize = CDROM_SECTOR_SIZE;
+ adrive_g->drive.sectors = (u64)-1;
u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05;
-
- // Report drive info to user.
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u8 slave = ataid % 2;
- printf("ata%d-%d: %s ATAPI-%d %s\n", channel, slave
- , Drives.drives[driveid].model, extract_version(buffer)
- , (iscd ? "CD-Rom/DVD-Rom" : "Device"));
+ char model[MAXMODEL+1];
+ char *desc = znprintf(MAXDESCSIZE
+ , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]"
+ , adrive_g->chan_gf->chanid, adrive_g->slave
+ , ata_extract_model(model, MAXMODEL, buffer)
+ , ata_extract_version(buffer)
+ , (iscd ? "DVD/CD" : "Device"));
+ dprintf(1, "%s\n", desc);
// fill cdidmap
- if (iscd)
- map_cd_drive(driveid);
+ if (iscd) {
+ int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_tmp,
+ adrive_g->chan_gf->chanid,
+ adrive_g->slave);
+ boot_add_cd(&adrive_g->drive, desc, prio);
+ }
- return 0;
+ return adrive_g;
}
-static int
-init_drive_ata(int driveid, u16 *buffer)
+// Detect if the given drive is a regular ata drive - initialize it if so.
+static struct atadrive_s *
+init_drive_ata(struct atadrive_s *dummy, u16 *buffer)
{
// Send an IDENTIFY_DEVICE command to device
- memset(buffer, 0, IDE_SECTOR_SIZE);
- struct disk_op_s dop;
- memset(&dop, 0, sizeof(dop));
- dop.driveid = driveid;
- dop.count = 1;
- dop.lba = 1;
- dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer);
- int ret = ata_cmd_data(&dop, 0, ATA_CMD_IDENTIFY_DEVICE);
+ int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_DEVICE);
if (ret)
- return ret;
+ return NULL;
// Success - setup as ATA.
- extract_identify(driveid, buffer);
- SET_GLOBAL(Drives.drives[driveid].type, DTYPE_ATA);
- SET_GLOBAL(Drives.drives[driveid].blksize, IDE_SECTOR_SIZE);
+ struct atadrive_s *adrive_g = init_atadrive(dummy, buffer);
+ if (!adrive_g)
+ return NULL;
+ adrive_g->drive.type = DTYPE_ATA;
+ adrive_g->drive.blksize = DISK_SECTOR_SIZE;
- SET_GLOBAL(Drives.drives[driveid].pchs.cylinders, buffer[1]);
- SET_GLOBAL(Drives.drives[driveid].pchs.heads, buffer[3]);
- SET_GLOBAL(Drives.drives[driveid].pchs.spt, buffer[6]);
+ adrive_g->drive.pchs.cylinders = buffer[1];
+ adrive_g->drive.pchs.heads = buffer[3];
+ adrive_g->drive.pchs.spt = buffer[6];
u64 sectors;
if (buffer[83] & (1 << 10)) // word 83 - lba48 support
sectors = *(u64*)&buffer[100]; // word 100-103
else
sectors = *(u32*)&buffer[60]; // word 60 and word 61
- SET_GLOBAL(Drives.drives[driveid].sectors, sectors);
-
- // Setup disk geometry translation.
- setup_translation(driveid);
-
- // Report drive info to user.
- u8 ataid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 channel = ataid / 2;
- u8 slave = ataid % 2;
- char *model = Drives.drives[driveid].model;
- printf("ata%d-%d: %s ATA-%d Hard-Disk ", channel, slave, model
- , extract_version(buffer));
- u64 sizeinmb = sectors >> 11;
- if (sizeinmb < (1 << 16))
- printf("(%u MiBytes)\n", (u32)sizeinmb);
- else
- printf("(%u GiBytes)\n", (u32)(sizeinmb >> 10));
-
+ adrive_g->drive.sectors = sectors;
+ u64 adjsize = sectors >> 11;
+ char adjprefix = 'M';
+ if (adjsize >= (1 << 16)) {
+ adjsize >>= 10;
+ adjprefix = 'G';
+ }
+ char model[MAXMODEL+1];
+ char *desc = znprintf(MAXDESCSIZE
+ , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)"
+ , adrive_g->chan_gf->chanid, adrive_g->slave
+ , ata_extract_model(model, MAXMODEL, buffer)
+ , ata_extract_version(buffer)
+ , (u32)adjsize, adjprefix);
+ dprintf(1, "%s\n", desc);
+
+ int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_tmp,
+ adrive_g->chan_gf->chanid,
+ adrive_g->slave);
// Register with bcv system.
- add_bcv_hd(driveid, model);
+ boot_add_hd(&adrive_g->drive, desc, prio);
- return 0;
+ return adrive_g;
}
+static u64 SpinupEnd;
+
+// Wait for non-busy status and check for "floating bus" condition.
static int
-powerup_await_non_bsy(u16 base, u64 end)
+powerup_await_non_bsy(u16 base)
{
u8 orstatus = 0;
u8 status;
break;
orstatus |= status;
if (orstatus == 0xff) {
- dprintf(1, "powerup IDE floating\n");
+ dprintf(4, "powerup IDE floating\n");
return orstatus;
}
- if (rdtscll() > end) {
- dprintf(1, "powerup IDE time out\n");
+ if (check_tsc(SpinupEnd)) {
+ warn_timeout();
return -1;
}
+ yield();
}
dprintf(6, "powerup iobase=%x st=%x\n", base, status);
return status;
}
+// Detect any drives attached to a given controller.
static void
-ata_detect()
+ata_detect(void *data)
{
+ struct ata_channel_s *chan_gf = data;
+ struct atadrive_s dummy;
+ memset(&dummy, 0, sizeof(dummy));
+ dummy.chan_gf = chan_gf;
// Device detection
- u64 end = calc_future_tsc(IDE_TIMEOUT);
- int ataid, last_reset_ataid=-1;
- for (ataid=0; ataid<CONFIG_MAX_ATA_INTERFACES*2; ataid++) {
- u8 channel = ataid / 2;
- u8 slave = ataid % 2;
-
- u16 iobase1 = GET_GLOBAL(ATA_channels[channel].iobase1);
- if (!iobase1)
- break;
-
+ int didreset = 0;
+ u8 slave;
+ for (slave=0; slave<=1; slave++) {
// Wait for not-bsy.
- int status = powerup_await_non_bsy(iobase1, end);
+ u16 iobase1 = chan_gf->iobase1;
+ int status = powerup_await_non_bsy(iobase1);
if (status < 0)
continue;
u8 newdh = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0;
outb(newdh, iobase1+ATA_CB_DH);
ndelay(400);
- status = powerup_await_non_bsy(iobase1, end);
+ status = powerup_await_non_bsy(iobase1);
if (status < 0)
continue;
outb(0xaa, iobase1+ATA_CB_SN);
u8 sc = inb(iobase1+ATA_CB_SC);
u8 sn = inb(iobase1+ATA_CB_SN);
- dprintf(6, "ata_detect ataid=%d sc=%x sn=%x dh=%x\n"
- , ataid, sc, sn, dh);
+ dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n"
+ , chan_gf->chanid, slave, sc, sn, dh);
if (sc != 0x55 || sn != 0xaa || dh != newdh)
continue;
- // Prepare new driveid.
- u8 driveid = GET_GLOBAL(Drives.drivecount);
- if (driveid >= ARRAY_SIZE(Drives.drives))
- break;
- memset(&Drives.drives[driveid], 0, sizeof(Drives.drives[0]));
- Drives.drives[driveid].cntl_id = ataid;
+ // Prepare new drive.
+ dummy.slave = slave;
// reset the channel
- if (slave && ataid == last_reset_ataid + 1) {
- // The drive was just reset - no need to reset it again.
- } else {
- ata_reset(driveid);
- last_reset_ataid = ataid;
+ if (!didreset) {
+ ata_reset(&dummy);
+ didreset = 1;
}
// check for ATAPI
u16 buffer[256];
- int ret = init_drive_atapi(driveid, buffer);
- if (!ret) {
- // Found an ATAPI drive.
- } else {
+ struct atadrive_s *adrive_g = init_drive_atapi(&dummy, buffer);
+ if (!adrive_g) {
+ // Didn't find an ATAPI drive - look for ATA drive.
u8 st = inb(iobase1+ATA_CB_STAT);
if (!st)
// Status not set - can't be a valid drive.
continue;
// Wait for RDY.
- ret = await_rdy(iobase1);
+ int ret = await_rdy(iobase1);
if (ret < 0)
continue;
// check for ATA.
- ret = init_drive_ata(driveid, buffer);
- if (ret)
+ adrive_g = init_drive_ata(&dummy, buffer);
+ if (!adrive_g)
// No ATA drive found
continue;
}
- SET_GLOBAL(Drives.drivecount, driveid+1);
u16 resetresult = buffer[93];
dprintf(6, "ata_detect resetresult=%04x\n", resetresult);
// resetresult looks valid and device 0 is responding to
// device 1 requests - device 1 must not be present - skip
// detection.
- ataid++;
+ break;
}
+}
- printf("\n");
+// Initialize an ata controller and detect its drives.
+static void
+init_controller(struct pci_device *pci, int irq
+ , u32 port1, u32 port2, u32 master)
+{
+ static int chanid = 0;
+ struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf));
+ if (!chan_gf) {
+ warn_noalloc();
+ return;
+ }
+ chan_gf->chanid = chanid++;
+ chan_gf->irq = irq;
+ chan_gf->pci_bdf = pci ? pci->bdf : -1;
+ chan_gf->pci_tmp = pci;
+ chan_gf->iobase1 = port1;
+ chan_gf->iobase2 = port2;
+ chan_gf->iomaster = master;
+ dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n"
+ , chanid, port1, port2, master, irq, chan_gf->pci_bdf);
+ run_thread(ata_detect, chan_gf);
}
+#define IRQ_ATA1 14
+#define IRQ_ATA2 15
+
+// Handle controllers on an ATA PCI device.
static void
-ata_init()
+init_pciata(struct pci_device *pci, u8 prog_if)
{
- // Scan PCI bus for ATA adapters
- int count=0;
- int bdf, max;
- foreachpci(bdf, max) {
- if (pci_config_readw(bdf, PCI_CLASS_DEVICE) != PCI_CLASS_STORAGE_IDE)
- continue;
- if (count >= ARRAY_SIZE(ATA_channels))
- break;
+ pci->have_driver = 1;
+ u16 bdf = pci->bdf;
+ u8 pciirq = pci_config_readb(bdf, PCI_INTERRUPT_LINE);
+ int master = 0;
+ if (CONFIG_ATA_DMA && prog_if & 0x80) {
+ // Check for bus-mastering.
+ u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_4);
+ if (bar & PCI_BASE_ADDRESS_SPACE_IO) {
+ master = bar & PCI_BASE_ADDRESS_IO_MASK;
+ pci_config_maskw(bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER);
+ }
+ }
- u8 irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE);
- SET_GLOBAL(ATA_channels[count].irq, irq);
- SET_GLOBAL(ATA_channels[count].pci_bdf, bdf);
+ u32 port1, port2, irq;
+ if (prog_if & 1) {
+ port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_0)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_1)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ irq = pciirq;
+ } else {
+ port1 = PORT_ATA1_CMD_BASE;
+ port2 = PORT_ATA1_CTRL_BASE;
+ irq = IRQ_ATA1;
+ }
+ init_controller(pci, irq, port1, port2, master);
+
+ if (prog_if & 4) {
+ port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_2)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_3)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ irq = pciirq;
+ } else {
+ port1 = PORT_ATA2_CMD_BASE;
+ port2 = PORT_ATA2_CTRL_BASE;
+ irq = IRQ_ATA2;
+ }
+ init_controller(pci, irq, port1, port2, master ? master + 8 : 0);
+}
- u8 prog_if = pci_config_readb(bdf, PCI_CLASS_PROG);
- u32 port1, port2;
+static void
+found_genericata(struct pci_device *pci, void *arg)
+{
+ init_pciata(pci, pci->prog_if);
+}
- if (prog_if & 1) {
- port1 = pci_config_readl(bdf, PCI_BASE_ADDRESS_0) & ~3;
- port2 = pci_config_readl(bdf, PCI_BASE_ADDRESS_1) & ~3;
- } else {
- port1 = 0x1f0;
- port2 = 0x3f0;
- }
- SET_GLOBAL(ATA_channels[count].iobase1, port1);
- SET_GLOBAL(ATA_channels[count].iobase2, port2);
- dprintf(1, "ATA controller %d at %x/%x (dev %x prog_if %x)\n"
- , count, port1, port2, bdf, prog_if);
- count++;
-
- if (prog_if & 4) {
- port1 = pci_config_readl(bdf, PCI_BASE_ADDRESS_2) & ~3;
- port2 = pci_config_readl(bdf, PCI_BASE_ADDRESS_3) & ~3;
- } else {
- port1 = 0x170;
- port2 = 0x370;
- }
- dprintf(1, "ATA controller %d at %x/%x (dev %x prog_if %x)\n"
- , count, port1, port2, bdf, prog_if);
- SET_GLOBAL(ATA_channels[count].iobase1, port1);
- SET_GLOBAL(ATA_channels[count].iobase2, port2);
- count++;
+static void
+found_compatibleahci(struct pci_device *pci, void *arg)
+{
+ if (CONFIG_AHCI)
+ // Already handled directly via native ahci interface.
+ return;
+ init_pciata(pci, 0x8f);
+}
+
+static const struct pci_device_id pci_ata_tbl[] = {
+ PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE
+ , found_genericata),
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4391, found_compatibleahci),
+ PCI_DEVICE_END,
+};
+
+// Locate and init ata controllers.
+static void
+ata_init(void)
+{
+ if (!CONFIG_COREBOOT && !PCIDevices) {
+ // No PCI devices found - probably a QEMU "-M isapc" machine.
+ // Try using ISA ports for ATA controllers.
+ init_controller(NULL, IRQ_ATA1
+ , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0);
+ init_controller(NULL, IRQ_ATA2
+ , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0);
+ return;
+ }
+
+ // Scan PCI bus for ATA adapters
+ struct pci_device *pci;
+ foreachpci(pci) {
+ pci_init_device(pci_ata_tbl, pci, NULL);
}
}
void
-ata_setup()
+ata_setup(void)
{
+ ASSERT32FLAT();
if (!CONFIG_ATA)
return;
dprintf(3, "init hard drives\n");
+
+ SpinupEnd = calc_future_tsc(IDE_TIMEOUT);
ata_init();
- ata_detect();
SET_BDA(disk_control_byte, 0xc0);
- enable_hwirq(14, entry_76);
+ enable_hwirq(14, FUNC16(entry_76));
}
projects / seabios.git / blobdiff