vgabios: Merge support for GeodeLX vga bios.

[seabios.git] / src / Kconfig

diff --git a/src/Kconfig b/src/Kconfig
index e732528fb5db8239928959d4f0f40ffb38a94baf..bd4550e41be4abffad9406faa27517067af72a58 100644 (file)
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -104,15 +104,15 @@ menu "Hardware support"
     config AHCI
         depends on DRIVES
         bool "AHCI controllers"
-        default n
+        default y
         help
             Support for AHCI disk code.
     config VIRTIO_BLK
         depends on DRIVES && !COREBOOT
-        bool "VirtIO controllers"
+        bool "virtio-blk controllers"
         default y
         help
-            Support boot from virtio storage.
+            Support boot from virtio-blk storage.
     config FLOPPY
         depends on DRIVES
         bool "Floppy controller"
@@ -126,14 +126,6 @@ menu "Hardware support"
         default y
         help
             Support PS2 ports (keyboard and mouse).
-    config PS2_KEYBOARD_SPINUP
-        depends on PS2PORT && COREBOOT
-        int "Extra time (in ms) to allow a keyboard to initialize"
-        default 0
-        help
-            Some PS2 keyboards don't respond to commands immediately
-            after powering on.  Specify a positive value here to allow
-            additional time for the keyboard to become responsive.
 
     config USB
         bool "USB"
@@ -256,17 +248,6 @@ menu "BIOS interfaces"
             Select this if option ROMs are already copied to
             0xc0000-0xf0000.  This must only be selected when using
             Bochs or QEMU versions older than 0.12.
-    config OPTIONROMS_CHECKSUM
-        depends on OPTIONROMS
-        bool "Require correct checksum on option ROMs"
-        default y
-        help
-            Option ROMs are required to have correct checksums.
-            However, some option ROMs in the wild don't correctly
-            follow the specifications and have bad checksums.
-            Say N here to allow SeaBIOS to execute them anyways.
-
-            If unsure, say Y.
     config PMM
         depends on OPTIONROMS
         bool "PMM interface"
@@ -300,12 +281,6 @@ menu "BIOS interfaces"
         default y
         help
             Support S3 resume handler.
-    config S3_RESUME_VGA_INIT
-        depends on S3_RESUME
-        bool "Run VGA rom on S3 resume"
-        default n
-        help
-            Run the vga rom during S3 resume.
 
     config VGAHOOKS
         depends on COREBOOT
@@ -349,6 +324,53 @@ menu "BIOS Tables"
             Support generation of ACPI tables.
 endmenu
 
+menu "VGA ROM"
+    config VGA_CIRRUS
+        bool "QEMU Cirrus CLGD 54xx VGA BIOS"
+        default n
+        help
+            Build support for Cirrus VGA emulation.
+
+    config VGA_BOCHS
+        bool "Bochs DISPI interface VGA BIOS"
+        default n
+        help
+            Build support for Bochs DISPI interface
+
+    config VGA_GEODELX
+        bool "GeodeLX interface VGA BIOS"
+        default n
+        help
+            Build support for Geode vga
+
+    config VGA_PCI
+        bool "PCI ROM Headers"
+        default y
+        help
+            Build PCI ROM headers so the vga rom can be extracted from
+            a PCI device.
+
+    config VGA_VID
+        depends on VGA_PCI
+        hex "PCI Vendor ID"
+        default 0x1013 if VGA_CIRRUS
+        default 0x1234 if VGA_BOCHS
+        default 0x1022 if VGA_GEODELX
+        default 0x0000
+        help
+            Vendor ID for the PCI ROM
+
+    config VGA_DID
+        depends on VGA_PCI
+        hex "PCI Device ID"
+        default 0x00b8 if VGA_CIRRUS
+        default 0x1111 if VGA_BOCHS
+        default 0x2081 if VGA_GEODELX
+        default 0x0000
+        help
+            Device ID for the PCI ROM
+endmenu
+
 menu "Debugging"
     config DEBUG_LEVEL
         int "Debug level"
@@ -371,12 +393,4 @@ menu "Debugging"
         default 0x3f8
         help
             Base port for serial - generally 0x3f8, 0x2f8, 0x3e8, or 0x2e8.
-
-    config SCREEN_AND_DEBUG
-        depends on DEBUG_LEVEL != 0
-        bool "Show screen writes on debug ports"
-        default y
-        help
-            Send characters that SeaBIOS writes to the screen to the
-            debug ports.
 endmenu