// Variable layouts of bios. // // Copyright (C) 2008 Kevin O'Connor // // This file may be distributed under the terms of the GNU GPLv3 license. #ifndef __BIOSVAR_H #define __BIOSVAR_H #include "types.h" // u8 #include "farptr.h" // SET_SEG #include "config.h" // CONFIG_* /**************************************************************** * Bios Data Area (BDA) ****************************************************************/ struct ivec { u16 offset; u16 seg; }; struct bios_data_area_s { // 00:00 struct ivec ivecs[256]; // 30:00 // u8 stack[256]; // 40:00 u16 port_com[4]; u16 port_lpt[3]; u16 ebda_seg; // 40:10 u16 equipment_list_flags; u8 pad1; u16 mem_size_kb; u8 pad2; u8 ps2_ctrl_flag; u8 kbd_flag0; u8 kbd_flag1; u8 alt_keypad; u16 kbd_buf_head; u16 kbd_buf_tail; // 40:1e u8 kbd_buf[32]; u8 floppy_recalibration_status; u8 floppy_motor_status; // 40:40 u8 floppy_motor_counter; u8 floppy_last_status; u8 floppy_return_status[7]; u8 other1[0x7]; // 40:50 u8 other2[0x10]; // 40:60 u8 other3[0x7]; u32 jump_cs_ip; u8 dummy; u32 timer_counter; // 40:70 u8 timer_rollover; u8 break_flag; u16 soft_reset_flag; u8 disk_last_status; u8 disk_count; u8 disk_control_byte; u8 port_disk; u8 lpt_timeout[4]; u8 com_timeout[4]; // 40:80 u16 kbd_buf_start_offset; u16 kbd_buf_end_offset; u8 other5[7]; u8 floppy_last_data_rate; u8 disk_status_controller; u8 disk_error_controller; u8 disk_interrupt_flag; u8 floppy_harddisk_info; // 40:90 u8 floppy_media_state[4]; u8 floppy_track0; u8 floppy_track1; u8 kbd_mode; u8 kbd_led; u32 ptr_user_wait_complete_flag; u32 user_wait_timeout; // 40:A0 u8 rtc_wait_flag; } PACKED; // BDA floppy_recalibration_status bitdefs #define FRS_TIMEOUT (1<<7) // BDA rtc_wait_flag bitdefs #define RWS_WAIT_PENDING (1<<0) #define RWS_WAIT_ELAPSED (1<<7) // BDA floppy_media_state bitdefs #define FMS_DRIVE_STATE_MASK (0x07) #define FMS_MEDIA_DRIVE_ESTABLISHED (1<<4) #define FMS_DOUBLE_STEPPING (1<<5) #define FMS_DATA_RATE_MASK (0xc0) // Accessor functions #define GET_BDA(var) \ GET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var) #define SET_BDA(var, val) \ SET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var, (val)) #define CLEARBITS_BDA(var, val) do { \ typeof(((struct bios_data_area_s *)0)->var) __val = GET_BDA(var); \ SET_BDA(var, (__val & ~(val))); \ } while (0) #define SETBITS_BDA(var, val) do { \ typeof(((struct bios_data_area_s *)0)->var) __val = GET_BDA(var); \ SET_BDA(var, (__val | (val))); \ } while (0) /**************************************************************** * Hard drive info ****************************************************************/ struct chs_s { u16 heads; // # heads u16 cylinders; // # cylinders u16 spt; // # sectors / track }; // DPTE definition struct dpte_s { u16 iobase1; u16 iobase2; u8 prefix; u8 unused; u8 irq; u8 blkcount; u8 dma; u8 pio; u16 options; u16 reserved; u8 revision; u8 checksum; }; struct ata_channel_s { u8 iface; // ISA or PCI u16 iobase1; // IO Base 1 u16 iobase2; // IO Base 2 u8 irq; // IRQ }; struct ata_device_s { u8 type; // Detected type of ata (ata/atapi/none/unknown) u8 device; // Detected type of attached devices (hd/cd/none) u8 removable; // Removable device flag u8 lock; // Locks for removable devices u8 mode; // transfer mode : PIO 16/32 bits - IRQ - ISADMA - PCIDMA u16 blksize; // block size u8 translation; // type of translation struct chs_s lchs; // Logical CHS struct chs_s pchs; // Physical CHS u32 sectors; // Total sectors count }; struct ata_s { // ATA channels info struct ata_channel_s channels[CONFIG_MAX_ATA_INTERFACES]; // ATA devices info struct ata_device_s devices[CONFIG_MAX_ATA_DEVICES]; // // map between bios hd/cd id and ata channels u8 hdcount, cdcount; u8 idmap[2][CONFIG_MAX_ATA_DEVICES]; // Buffer for DPTE table struct dpte_s dpte; // Count of transferred sectors and bytes u16 trsfsectors; }; // ElTorito Device Emulation data struct cdemu_s { u8 active; u8 media; u8 emulated_drive; u8 controller_index; u16 device_spec; u32 ilba; u16 buffer_segment; u16 load_segment; u16 sector_count; // Virtual device struct chs_s vdevice; }; /**************************************************************** * Initial Program Load (IPL) ****************************************************************/ struct ipl_entry_s { u16 type; u16 flags; u32 vector; u32 description; }; struct ipl_s { struct ipl_entry_s table[8]; u16 count; u16 sequence; u16 bootfirst; }; #define IPL_TYPE_FLOPPY 0x01 #define IPL_TYPE_HARDDISK 0x02 #define IPL_TYPE_CDROM 0x03 #define IPL_TYPE_BEV 0x80 /**************************************************************** * Extended Bios Data Area (EBDA) ****************************************************************/ struct fdpt_s { u16 cylinders; u8 heads; u8 a0h_signature; u8 phys_sectors; u16 precompensation; u8 reserved; u8 drive_control_byte; u16 phys_cylinders; u8 phys_heads; u16 landing_zone; u8 sectors; u8 checksum; } PACKED; struct extended_bios_data_area_s { u8 size; u8 reserved1[0x21]; u32 far_call_pointer; u8 mouse_flag1; u8 mouse_flag2; u8 mouse_data[0x08]; // 0x30 u8 other1[0x0d]; // 0x3d struct fdpt_s fdpt0; struct fdpt_s fdpt1; // 0x5d u8 other2[0xC4]; // ATA Driver data struct ata_s ata; // El Torito Emulation data struct cdemu_s cdemu; // Initial program load struct ipl_s ipl; } PACKED; // Accessor functions #define GET_EBDA(var) \ GET_FARVAR(SEG_EBDA, ((struct extended_bios_data_area_s *)0)->var) #define SET_EBDA(var, val) \ SET_FARVAR(SEG_EBDA, ((struct extended_bios_data_area_s *)0)->var, (val)) /**************************************************************** * Registers saved/restored in romlayout.S ****************************************************************/ #define UREG(ER, R, RH, RL) union { u32 ER; struct { u16 R; u16 R ## _hi; }; struct { u8 RL; u8 RH; u8 R ## _hilo; u8 R ## _hihi; }; } // Layout of registers passed in to irq handlers. Note that this // layout corresponds to code in romlayout.S - don't change it here // without also updating the assembler code. struct bregs { u16 ds; u16 es; UREG(edi, di, di_hi, di_lo); UREG(esi, si, si_hi, si_lo); UREG(ebx, bx, bh, bl); UREG(edx, dx, dh, dl); UREG(ecx, cx, ch, cl); UREG(eax, ax, ah, al); u16 ip; u16 cs; u16 flags; } PACKED; // bregs flags bitdefs #define F_ZF (1<<6) #define F_CF (1<<0) static inline void set_cf(struct bregs *regs, int cond) { if (cond) regs->flags |= F_CF; else regs->flags &= ~F_CF; } /**************************************************************** * Bios Config Table ****************************************************************/ struct bios_config_table_s { u16 size; u8 model; u8 submodel; u8 biosrev; u8 feature1, feature2, feature3, feature4, feature5; } PACKED; extern struct bios_config_table_s BIOS_CONFIG_TABLE; /**************************************************************** * Memory layout info ****************************************************************/ #define SEG_BIOS 0xf000 #define SEG_EBDA 0x9fc0 #define SEG_BDA 0x0000 #define EBDA_SIZE 1 // In KiB #define BASE_MEM_IN_K (640 - EBDA_SIZE) #endif // __BIOSVAR_H