From 3140c0cc070989e69eff0bff76dde4d00f2a1940 Mon Sep 17 00:00:00 2001 From: Bernhard Urban Date: Sun, 13 Dec 2009 22:37:13 +0100 Subject: [PATCH] prep for python kernelprog --- pkernel/kernel.py | 196 +++++++++++++++++----------------------------- 1 file changed, 70 insertions(+), 126 deletions(-) diff --git a/pkernel/kernel.py b/pkernel/kernel.py index 89f7d7c..20b3a36 100755 --- a/pkernel/kernel.py +++ b/pkernel/kernel.py @@ -7,130 +7,74 @@ DEVICE="/dev/ttyUSB0" # baudrate used for communication with pkernel KERNEL_BAUDRATE=38400 -print "Initializing serial port..." -tty = SerialPort(DEVICE, 500, INIT_BAUDRATE) - -while 1: - tty.write('V') - tty.flush() - try: - if tty.read() == 'F': - break - except SerialPortException: - # timeout happened, who cares ;-) - pass - -print "OK, trying to set baudrate..." -# set baudrate -cmdBAUDRATE(REAL_BAUDRATE) -tty = SerialPort(DEVICE, 100, REAL_BAUDRATE) - -""" -print -sendByte(0x01) -print recvByte() -sendByte(0x02) -print recvByte() -sys.exit(0) -""" -""" -# execute (existing) program in ram -cmdCALL(0x00033ffc) -sys.exit(0) -""" - -# read something from the IRAM -#print cmdREAD(0x00030000, 32) - -#data = [] -#for i in range(0, 32): -# data.append(i) -#cmdWRITE(0x00030000, 32, data) - - -""" -# write something to the begin of the IRAM -data_wr = [] -checksum = 0 -for i in range(0, 0x400): - value = i%256 - data_wr.append(value) - checksum = (checksum + value) % (2**16) - -print "Calculated checksum:", checksum -print "Writing", data_wr, "to the IRAM..." -cmdWRITE(0x00030000, len(data_wr), data_wr) -print "Received Checksum:", last_checksum -print +def pkernWRITE(address, size, data): + # send WRITE command + sendByte(0x01) + if (recvByte() != 0xF1): + raise Exception + sendByte(0x03) + if (recvByte() != 0x83): + raise Exception + # tell desired address and size + sendDWord(address) + sendWord(size) + # write binary stream of data + for i in range(0, size): + sendByte(data[i]) + # get checksum + recvChecksum() -print "Reading from the IRAM again..." -data_re = cmdREAD(0x00030000, len(data_wr)) -print "Received data:", data_re, "Checksum:", last_checksum -""" - -""" -# see whats in the iram at the moment -data_wr = [] -print "Reading from the IRAM..." -data_re = cmdREAD(0x00030000, 0x10000-4) -print "Received data:", data_re, "Checksum:", last_checksum -""" - -""" -# see whats in the dram at the moment -data_wr = [] -print "Reading from the DRAM..." -data_re = cmdREAD(0x0002C000, 0x10000-0xC000-4) -print "Received data:", data_re, "Checksum:", last_checksum -""" - -""" -# blank the iram -data_wr = [] -for i in range(0, 0x10000-4): - value = 0 - data_wr.append(value) - -print "Writing", data_wr, "to the IRAM..." -cmdWRITE(0x00030000, len(data_wr), data_wr) -print "Received Checksum:", last_checksum -print -""" - -""" -# blank the dram -data_wr = [] -for i in range(0, 0x10000-0xC000-4): - value = 0 - data_wr.append(value) - -print "Writing", data_wr, "to the DRAM..." -cmdWRITE(0x0002C000, len(data_wr), data_wr) -print "Received Checksum:", last_checksum -print -""" - - -# write some data in the iram and try to execute it -data_wr =[ - 0x9B,0x00, - 0x0D,0x4e, - 0xcf,0xf1, - 0x16,0x01, - 0x9b,0x05, - 0x04,0xc7, - 0xc1,0x06, - 0x16,0x56, - 0xe0,0xfb, #branch - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, #nop - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, - 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0] -print "Writing", data_wr, "to the IRAM..." -cmdWRITE(0x00030000, len(data_wr), data_wr) -print "Received Checksum:", last_checksum -print -cmdCALL(0x00030000) +print "Initializing serial port..." +tty = SerialPort(DEVICE, 500, KERNEL_BAUDRATE) + +# check command line arguments +if len(sys.argv) != 2: + print "Usage: " + sys.argv[0] + " [mhx-file]" + sys.exit(1) + +# read in data from mhx-file before starting +try: + fp = open(sys.argv[1], "r") +except IOError: + print sys.argv[0] + ": Error - couldn't open file " + sys.argv[1] + "!" + sys.exit(1) + +linecount = 0 +for line in fp: + linecount += 1 + # get rid of newline characters + line = line.strip() + + # we're only interested in S2 (data sequence with 3 address bytes) records by now + if line[0:2] == "S2": + byte_count = int(line[2:4], 16) + # just to get sure, check if byte count field is valid + if (len(line)-4) != (byte_count*2): + print sys.argv[0] + ": Warning - inavlid byte count field in " + \ + sys.argv[1] + ":" + str(linecount) + ", skipping line!" + continue + + # address and checksum bytes are not needed + byte_count -= 4 + address = int(line[4:10], 16) + datastr = line[10:10+byte_count*2] + + # convert data hex-byte-string to real byte data list + data = [] + for i in range(0, len(datastr)/2): + data.append(int(datastr[2*i:2*i+2], 16)) + + # add flash sequence to our list + flashseqs.append(FlashSequence(address, data)) + +print "The following flash sequences have been read in:" +for seq in flashseqs: + print hex(seq.address) + ":", seq.data + + +# let the fun begin! +for seq in flashseqs: + print "Flashing", len(seq.data), "bytes at address", hex(seq.address) + pkernWRITE(seq.address, len(seq.data), seq.data) + +print "Reset your board now to run code from Flash" -- 2.25.1