w00t, wtf IT WORKS NOW!!!1

[pyfrprog.git] / pkernel / main.c

diff --git a/pkernel/main.c b/pkernel/main.c
index 2e024d27c89614751f1a5f28ba3a4ea5ebe2d133..89fc2c85f0a415eb04839d99c4a7a0b86e154905 100644 (file)
--- a/pkernel/main.c
+++ b/pkernel/main.c
@@ -1,15 +1,20 @@
 #include "mb91465k.h"
-#include "vectors.h"
-#include "rlt.h"
 #include "flash.h"
 
 #pragma section CODE=IRAM,attr=CODE
+
+void increaseled(void)
+{
+       PDR14 = (PDR14+1)%256;
+       HWWD_CL = 0;
+}
+
 void main(void)
 {
        unsigned char error = 0;
        unsigned char global_error = 0; 
        unsigned int i, baseaddr;
-       unsigned int toflash2[] = {0x9b00,
+       unsigned int toflash[] = {0x9b00,
                                                                0x0d4e,
                                                                0xcff1,
                                                                0x1601,
@@ -18,16 +23,7 @@ void main(void)
                                                                0xc106,
                                                                0x1656,
                                                                0xe0fb}; //len = 9
-       unsigned int toflash[] = {0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000}; //len = 9
        
-       /*      Enable Clock Monitor    */
-       CSCFG_MONCKI = 1;
-       CMCFG = 0x0D;
-               
-       __EI();                    /* enable interrupts */
-       __set_il(31);              /* allow all levels */
-       InitIrqLevels();           /* init interrupts */
-
        PORTEN = 0x3;           /* enable I/O Ports */
                                /* This feature is not supported by MB91V460A */
                                /* For all other devices the I/O Ports must be enabled*/
@@ -36,12 +32,6 @@ void main(void)
        DDR14 = 0xFF;
        PDR14 = 0xff;
 
-       /*      Initialize Reload Timer Channel 0       */
-       RLT_InitializeTimer(0, RLT_RUMMODE_RELOAD, RLT_CLOCKMODE_DIV32, RLT_TRIGGER_SOFTWARE, RLT_OUTOUTMODE_HIGHLEVEL);
-       RLT_SetReloadValue(0,0xfffe);
-       RLT_TriggerTimer(0);
-       RLT_EnableInterrupt(0, 1);
-
        /*      Initialize UART4        */
        InitUart4();
 
@@ -49,7 +39,7 @@ void main(void)
        Puts4(" \n\n");
        Puts4("\n\n********** Welcome to FUJITSU FLASH Programming Demo **********\n");
 
-#if 0
+#if 1
        i = 0;
        baseaddr = 0xf4000;
        for (; i <0x30; i+=4) {
@@ -82,37 +72,6 @@ void main(void)
                Puthex4(baseaddr + (2*i), 6);
        }
 
-       i=0;
-       Puts4("\nCurrent Content of FLASH at 0xf4000 ... 0xf401F:\n");
-       while(i < 0x20)
-       {
-               Puts4("0x"); Puthex4( *(unsigned char *)(0xf4000 + i), 2); Puts4(" ");
-               i++;
-               if( (i % 0x10) == 0 ) Puts4("\n");
-       }
-       Puts4("\n================================================================\n");
-
-       i = 0;
-       baseaddr = 0xf4000;
-       for(; i<9; i++) {
-               Puts4("\nwrite: ");
-               error = FLASH_WriteHalfWord(baseaddr + (2*i), toflash2[i]);
-               Puts4(error == 1 ? "[sucess] " : "[failed] ");
-               Puts4("0x");
-               Puthex4(toflash2[i], 4);
-               Puts4(" @0x");
-               Puthex4(baseaddr + (2*i), 6);
-       }
-
-       i=0;
-       Puts4("\nCurrent Content of FLASH at 0xf4000 ... 0xf401F:\n");
-       while(i < 0x20)
-       {
-               Puts4("0x"); Puthex4( *(unsigned char *)(0xf4000 + i), 2); Puts4(" ");
-               i++;
-               if( (i % 0x10) == 0 ) Puts4("\n");
-       }
-                               
        /*      Output Ready Meassage   */
        if( global_error != 0 )
        {
@@ -123,8 +82,6 @@ void main(void)
                Puts4("\n********* FLASH Programming Demo done **********\n");
        }
 
-       RLT_EnableInterrupt(0, 0);
-                                       
     while(1)
     {