DEVICE="/dev/ttyUSB0"
# baudrate used for initialization
INIT_BAUDRATE=9600
-# baudrate used for communication after init
-REAL_BAUDRATE=38400
+# baudrate used for communication with the internal bootloader after init
+BOOTLOADER_BAUDRATE=38400
+# baudrate used for communication with the pkernel program that does the flashing eventually
+KERNEL_BAUDRATE=115200
# contains the last received checksum from a READ, WRITE or CHECKSUM command
last_checksum = 0
def sendByte(byte):
- time.sleep(0.001) # just to get sure, wait 1ms
tty.write(chr(byte))
def sendWord(word):
last_checksum = recvByte()
last_checksum |= (recvByte() << 8)
-def cmdREAD(address, size):
+def bootromREAD(address, size):
# send READ command
sendByte(0x01)
if (recvByte() != 0xF1):
recvChecksum()
return data
-def cmdWRITE(address, size, data):
+def bootromWRITE(address, size, data):
# send WRITE command
sendByte(0x01)
if (recvByte() != 0xF1):
recvChecksum()
# TODO: test this function!
-def cmdCALL(address):
+def bootromCALL(address):
# send CALL command
sendByte(0x01)
if (recvByte() != 0xF1):
#return recvByte()
# TODO: test this function!
-def cmdCHECKSUM():
+def bootromCHECKSUM():
# call CHECKSUM command
sendByte(0x01)
if (recvByte() != 0xF1):
# get checksum
recvChecksum()
-def cmdBAUDRATE(baudrate):
+def bootromBAUDRATE(baudrate):
# send BAUDRATE command
sendByte(0x01)
if (recvByte() != 0xF1):
# send desired baudrate
sendDWord(baudrate)
+def pkernCHIPERASE():
+ sendByte(0x15)
+ if (recvByte() != 0x45):
+ raise Exception
+ # wait till completion...
+ if (recvByte() != 0x23):
+ raise Exception
+
+def pkernERASE(address, size):
+ sendByte(0x12)
+ if (recvByte() != 0x11):
+ raise Exception
+ sendDWord(address)
+ sendWord(size)
+ if (recvByte() != 0x18):
+ raise Exception
+
+
+def pkernWRITE(address, size, data):
+ # send WRITE command
+ sendByte(0x13)
+ if (recvByte() != 0x37):
+ raise Exception
+ # tell desired address and size
+ sendDWord(address)
+ sendWord(size)
+
+ # write binary stream of data
+ for i in range(0, size):
+ sendByte(data[i])
+
+ if (recvByte() != 0x28):
+ raise Exception
+
class FlashSequence(object):
def __init__(self, address, data):
# check command line arguments
-if len(sys.argv) != 2:
- print "Usage: " + sys.argv[0] + " [mhx-file]"
+if len(sys.argv) != 3:
+ print "Usage: " + sys.argv[0] + " [pkernel mhx-file] [target mhx-file]"
sys.exit(1)
-# read in data from mhx-file before starting
+# read in data from mhx-files before starting
try:
- flashseqs = readMHXFile(sys.argv[1])
+ bootloaderseqs = readMHXFile(sys.argv[1])
+ pkernelseqs = readMHXFile(sys.argv[2])
except IOError as error:
print sys.argv[0] + ": Error - couldn't open file " + error.filename + "!"
sys.exit(1)
-print "The following flash sequences have been read in:"
-for seq in flashseqs:
- print hex(seq.address) + ":", seq.data
-
print "Initializing serial port..."
tty = SerialPort(DEVICE, 100, INIT_BAUDRATE)
-print "Please press RESET on your 1337 board..."
+print "Please press RESET on your board..."
-while 1:
+while True:
tty.write('V')
tty.flush()
try:
# timeout happened, who cares ;-)
pass
+starttime = time.time() # save time at this point for evaluating the duration at the end
+
print "OK, trying to set baudrate..."
# set baudrate
-cmdBAUDRATE(REAL_BAUDRATE)
-tty = SerialPort(DEVICE, 100, REAL_BAUDRATE)
+bootromBAUDRATE(BOOTLOADER_BAUDRATE)
+time.sleep(0.1) # just to get sure that the bootloader is really running in new baudrate mode!
+del tty
+tty = SerialPort(DEVICE, 100, BOOTLOADER_BAUDRATE)
+print "Transfering pkernel program to IRAM",
# let the fun begin!
-for seq in flashseqs:
+for seq in bootloaderseqs:
if(seq.address <= 0x40000):
addr = seq.address
else:
continue
- print "RAMing", len(seq.data), "bytes at address", hex(addr)
- cmdWRITE(addr, len(seq.data), seq.data)
+ #print "RAMing", len(seq.data), "bytes at address", hex(addr)
+ bootromWRITE(addr, len(seq.data), seq.data)
tty.flush()
+ sys.stdout.write(".")
+ sys.stdout.flush()
+print
-cmdCALL(0x30000);
-sys.exit(0)
-
-
-# some tests here.......
-"""
-# execute (existing) program in ram
-cmdCALL(0x00033ffc)
-sys.exit(0)
-"""
-
-# read something from the IRAM
-#print cmdREAD(0x00030000, 32)
-
-#data = []
-#for i in range(0, 32):
-# data.append(i)
-#cmdWRITE(0x00030000, 32, data)
-
+# execute our pkernel finally and set pkernel conform baudrate
+bootromCALL(0x30000)
+time.sleep(0.1) # just to get sure that the pkernel is really running!
+del tty
+tty = SerialPort(DEVICE, None, KERNEL_BAUDRATE)
-"""
-# write something to the begin of the IRAM
-data_wr = []
-checksum = 0
-for i in range(0, 0x400):
- value = i%256
- data_wr.append(value)
- checksum = (checksum + value) % (2**16)
+print "Performing ChipErase..."
+pkernCHIPERASE()
-print "Calculated checksum:", checksum
-print "Writing", data_wr, "to the IRAM..."
-cmdWRITE(0x00030000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
+print "Flashing",
+for seq in pkernelseqs:
+ # skip seqs only consisting of 0xffs
+ seqset = list(set(seq.data))
+ if len(seqset) == 1 and seqset[0] == 0xff:
+ continue
+ #print "Flashing", len(seq.data), "bytes at address", hex(seq.address)
+ pkernWRITE(seq.address, len(seq.data), seq.data)
+ tty.flush()
+ sys.stdout.write(".")
+ sys.stdout.flush()
print
-print "Reading from the IRAM again..."
-data_re = cmdREAD(0x00030000, len(data_wr))
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# see whats in the iram at the moment
-data_wr = []
-print "Reading from the IRAM..."
-data_re = cmdREAD(0x00030000, 0x10000-4)
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# see whats in the dram at the moment
-data_wr = []
-print "Reading from the DRAM..."
-data_re = cmdREAD(0x0002C000, 0x10000-0xC000-4)
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# blank the iram
-data_wr = []
-for i in range(0, 0x10000-4):
- value = 0
- data_wr.append(value)
-
-print "Writing", data_wr, "to the IRAM..."
-cmdWRITE(0x00030000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-"""
-
-"""
-# blank the dram
-data_wr = []
-for i in range(0, 0x10000-0xC000-4):
- value = 0
- data_wr.append(value)
-
-print "Writing", data_wr, "to the DRAM..."
-cmdWRITE(0x0002C000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-"""
-
-"""
-# write some data in the iram and try to execute it
-data_wr =[
- 0x9B,0x00,
- 0x0D,0x4e,
- 0xcf,0xf1,
- 0x16,0x01,
- 0x9b,0x05,
- 0x04,0xc7,
- 0xc1,0x06,
- 0x16,0x56,
- 0xe0,0xfb, #branch
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, #nop
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0]
-print "Writing", data_wr, "to the IRAM..."
-cmdWRITE(0x00030000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-cmdCALL(0x00030000)
-"""
+duration = time.time() - starttime
+print "Procedure complete, took", round(duration, 2), "seconds."
+
+sendByte(0x97) # exit and restart
+print "Program was started. Have fun!"
projects / pyfrprog.git / blobdiff