adapted setup_port to old, clean state
[ppcskel.git] / usb / host / ohci.c
index a33bd427860b5eadde9fe009182c1d908059a3a4..ce23376819570408e34841d74ce2d6e87bda0d52 100644 (file)
@@ -26,8 +26,17 @@ Copyright (C) 2009     Sebastian Falbesoner <sebastian.falbesoner@gmail.com>
                           (((dword) & 0x0000FF00) << 8)  | \
                           (((dword) & 0x000000FF) << 24) )
 
+static struct endpoint_descriptor *allocate_endpoint();
+static struct general_td *allocate_general_td(size_t);
+static void control_quirk();
+static void dbg_op_state();
+static void dbg_td_flag(u32 flag);
+static void configure_ports(u8 from_init);
+static void setup_port(u32 reg, u8 from_init);
+
 static struct ohci_hcca hcca_oh0;
 
+
 static struct endpoint_descriptor *allocate_endpoint()
 {
        struct endpoint_descriptor *ep;
@@ -43,12 +52,14 @@ static struct general_td *allocate_general_td(size_t bsize)
        struct general_td *td;
        td = (struct general_td *)memalign(sizeof(struct general_td), 16);
        td->flags = ACCESS_LE(0);
+       // TODO !! nexttd?
        td->nexttd = ACCESS_LE(virt_to_phys(td));
+       //td->nexttd = ACCESS_LE(0);
        if(bsize == 0) {
                td->cbp = td->be = ACCESS_LE(0);
        } else {
                //td->cbp = ACCESS_LE(virt_to_phys(memalign(bsize, 16))); //memailgn required here?
-               td->cbp = ACCESS_LE(virt_to_phys(malloc(bsize))); //memailgn required here?
+               td->cbp = ACCESS_LE(virt_to_phys(malloc(bsize)));
                td->be = ACCESS_LE(ACCESS_LE(td->cbp) + bsize - 1);
        }
        return td;
@@ -56,8 +67,8 @@ static struct general_td *allocate_general_td(size_t bsize)
 
 static void control_quirk()
 {
-       static struct endpoint_descriptor *ed; /* empty ED */
-       static struct general_td *td; /* dummy TD */
+       static struct endpoint_descriptor *ed = 0; /* empty ED */
+       static struct general_td *td = 0; /* dummy TD */
        u32 head;
        u32 current;
        u32 status;
@@ -148,20 +159,37 @@ static void dbg_op_state()
        }
 }
 
+static void dbg_td_flag(u32 flag)
+{
+       printf("**************** dbg_td_flag: 0x%08X ***************\n", flag);
+       printf("CC: %X\tshould be 0, see page 32 (ohci spec)\n", (flag>>28)&0xf);
+       printf("EC: %X\tsee page 20 (ohci spec)\n", (flag>>26)&3);
+       printf(" T: %X\n", (flag>>24)&3);
+       printf("DI: %X\n", (flag>>21)&7);
+       printf("DP: %X\n", (flag>>19)&3);
+       printf(" R: %X\n", (flag>>18)&1);
+       printf("********************************************************\n");
+}
+
+
 
 /**
  * Enqueue a transfer descriptor.
  */
-u8 first = 0;
 u8 hcdi_enqueue(usb_transfer_descriptor *td) {
-       control_quirk();
+       control_quirk(); //required? YES! :O
+
+       static struct endpoint_descriptor dummyconfig;
+       dummyconfig.flags = ACCESS_LE(OHCI_ENDPOINT_GENERAL_FORMAT);
+       dummyconfig.headp = dummyconfig.tailp = dummyconfig.nexted = ACCESS_LE(0);
 
        printf( "===========================\n"
                        "===========================\n");
        sync_before_read(&hcca_oh0, 256);
        printf("done head (nach sync): 0x%08X\n", ACCESS_LE(hcca_oh0.done_head));
-       printf("HCCA->frame_no: %d\nhcca->hccapad1: %d\n", ((ACCESS_LE(hcca_oh0.frame_no) & 0xffff0000)>>16), ACCESS_LE(hcca_oh0.frame_no)&0xffff );
-       if(hcca_oh0.done_head) printf("WWWWWWWWOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOTTTTTTTTTTTT\n");
+       printf("HCCA->frame_no: %d\nhcca->hccapad1: %d\n",
+                       ((ACCESS_LE(hcca_oh0.frame_no) & 0xffff)>>16),
+                       ACCESS_LE(hcca_oh0.frame_no)&0x0000ffff );
 
        struct general_td *tmptd = allocate_general_td(td->actlen);
        (void) memcpy((void*) (phys_to_virt(ACCESS_LE(tmptd->cbp))), td->buffer, td->actlen); 
@@ -185,28 +213,27 @@ u8 hcdi_enqueue(usb_transfer_descriptor *td) {
 
        printf("tmptd hexdump (before) 0x%08X:\n", tmptd);
        hexdump(tmptd, sizeof(struct general_td));
-       printf("tmptd->cbp hexdump (before) 0x%08X:\n", tmptd->cbp);
+       printf("tmptd->cbp hexdump (before) 0x%08X:\n", phys_to_virt(ACCESS_LE(tmptd->cbp)));
        hexdump((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
 
-       sync_after_write((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
        sync_after_write(tmptd, sizeof(struct general_td));
+       sync_after_write((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
 
-       struct endpoint_descriptor *dummyconfig = allocate_endpoint();
 
 #define ED_MASK2 ~0 /*((u32)~0x0f) */
 #define ED_MASK ((u32)~0x0f) 
-       dummyconfig->tailp = dummyconfig->headp = ACCESS_LE(virt_to_phys((void*) ((u32)tmptd & ED_MASK)));
+       dummyconfig.headp = ACCESS_LE(virt_to_phys((void*) ((u32)tmptd & ED_MASK)));
 
-       dummyconfig->flags |= ACCESS_LE(OHCI_ENDPOINT_LOW_SPEED | 
+       dummyconfig.flags |= ACCESS_LE(OHCI_ENDPOINT_LOW_SPEED | 
                OHCI_ENDPOINT_SET_DEVICE_ADDRESS(td->devaddress) | 
                OHCI_ENDPOINT_SET_ENDPOINT_NUMBER(td->endpoint) |
                OHCI_ENDPOINT_SET_MAX_PACKET_SIZE(td->maxp));
 
-       printf("dummyconfig hexdump (before) 0x%08X:\n", dummyconfig);
-       hexdump((void*) dummyconfig, 16);
+       printf("dummyconfig hexdump (before) 0x%08X:\n", &dummyconfig);
+       hexdump((void*) &dummyconfig, 16);
 
-       sync_after_write(dummyconfig, 16);
-       write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(dummyconfig));
+       sync_after_write(&dummyconfig, 16);
+       write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(&dummyconfig));
 
        printf("OHCI_CTRL_CLE: 0x%08X || ", read32(OHCI0_HC_CONTROL)&OHCI_CTRL_CLE);
        printf("OHCI_CLF: 0x%08X\n", read32(OHCI0_HC_COMMAND_STATUS)&OHCI_CLF);
@@ -218,7 +245,7 @@ u8 hcdi_enqueue(usb_transfer_descriptor *td) {
        u32 current = read32(OHCI0_HC_CTRL_CURRENT_ED);
        printf("current: 0x%08X\n", current);
        while(!current) {
-               udelay(10);
+               udelay(2);
                current = read32(OHCI0_HC_CTRL_CURRENT_ED);
        }
 
@@ -228,24 +255,36 @@ u8 hcdi_enqueue(usb_transfer_descriptor *td) {
        printf("+++++++++++++++++++++++++++++\n");
        udelay(20000);
 
-
        sync_before_read(tmptd, sizeof(struct general_td));
        printf("tmptd hexdump (after) 0x%08X:\n", tmptd);
        hexdump(tmptd, sizeof(struct general_td));
+       dbg_td_flag(ACCESS_LE(tmptd->flags));
 
        sync_before_read((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
-       printf("tmptd->cbp hexdump (after) 0x%08X:\n", tmptd->cbp);
+       printf("tmptd->cbp hexdump (after) 0x%08X:\n", phys_to_virt(ACCESS_LE(tmptd->cbp)));
        hexdump((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
 
-       sync_before_read(dummyconfig, 16);
-       printf("dummyconfig hexdump (after) 0x%08X:\n", dummyconfig);
-       hexdump((void*) dummyconfig, 16);
+       sync_before_read(&dummyconfig, 16);
+       printf("dummyconfig hexdump (after) 0x%08X:\n", &dummyconfig);
+       hexdump((void*) &dummyconfig, 16);
 
        sync_before_read(&hcca_oh0, 256);
        printf("done head (nach sync): 0x%08X\n", ACCESS_LE(hcca_oh0.done_head));
 
+       sync_before_read((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
+       (void) memcpy((void*) (td->buffer), phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
+
+       write32(OHCI0_HC_CONTROL, read32(OHCI0_HC_CONTROL)&~OHCI_CTRL_CLE);
+       dummyconfig.headp = dummyconfig.tailp = dummyconfig.nexted = ACCESS_LE(0);
        //should be free'd after taking it from the done queue
-       //free(tmptd);
+       //however, it fails?! WTF
+#if 0
+       printf("WTF1\n");
+       free(tmptd);
+       printf("WTF0\n");
+       free((void*) tmptd->cbp);
+       printf("WTF3\n");
+#endif
        return 0;
 }
 
@@ -320,17 +359,59 @@ void hcdi_init()
        write32(OHCI0_HC_CONTROL, OHCI_CONTROL_INIT | OHCI_USB_OPER);
 
        /* wake on ConnectStatusChange, matching external hubs */
-       set32(OHCI0_HC_RH_STATUS, RH_HS_DRWE);
+       write32(OHCI0_HC_RH_STATUS, /*RH_HS_DRWE |*/ RH_HS_LPSC);
 
        /* Choose the interrupts we care about now, others later on demand */
        write32(OHCI0_HC_INT_STATUS, ~0);
        write32(OHCI0_HC_INT_ENABLE, OHCI_INTR_INIT);
 
+       //wtf?
+       wait_ms ((read32(OHCI0_HC_RH_DESCRIPTOR_A) >> 23) & 0x1fe);
+
+       configure_ports((u8)1);
        irq_restore(cookie);
 
        dbg_op_state();
 }
 
+static void configure_ports(u8 from_init)
+{
+       printf("OHCI0_HC_RH_DESCRIPTOR_A:\t0x%08X\n", read32(OHCI0_HC_RH_DESCRIPTOR_A));
+       printf("OHCI0_HC_RH_DESCRIPTOR_B:\t0x%08X\n", read32(OHCI0_HC_RH_DESCRIPTOR_B));
+       printf("OHCI0_HC_RH_STATUS:\t\t0x%08X\n", read32(OHCI0_HC_RH_STATUS));
+       printf("OHCI0_HC_RH_PORT_STATUS_1:\t0x%08X\n", read32(OHCI0_HC_RH_PORT_STATUS_1));
+       printf("OHCI0_HC_RH_PORT_STATUS_2:\t0x%08X\n", read32(OHCI0_HC_RH_PORT_STATUS_2));
+
+       setup_port(OHCI0_HC_RH_PORT_STATUS_1, from_init);
+       setup_port(OHCI0_HC_RH_PORT_STATUS_2, from_init);
+       printf("configure_ports done\n");
+}
+
+static void setup_port(u32 reg, u8 from_init)
+{
+       u32 port = read32(reg);
+       if((port & RH_PS_CCS) && ((port & RH_PS_CSC) || from_init)) {
+               write32(reg, RH_PS_CSC);
+
+               wait_ms(150);
+
+               /* clear CSC flag, set PES and start port reset (PRS) */
+               write32(reg, RH_PS_PES);
+               while(!(read32(reg) & RH_PS_PES)) {
+                       printf("fu\n");
+                       return;
+               }
+
+               write32(reg, RH_PS_PRS);
+
+               /* spin until port reset is complete */
+               while(!(read32(reg) & RH_PS_PRSC)); // hint: it may stuck here
+               printf("loop done\n");
+
+               (void) usb_add_device();
+       }
+}
+
 void hcdi_irq()
 {
        /* read interrupt status */
@@ -363,6 +444,7 @@ void hcdi_irq()
        if (flags & OHCI_INTR_RHSC) {
                printf("RootHubStatusChange\n");
                /* TODO: set some next_statechange variable... */
+               configure_ports(0);
                write32(OHCI0_HC_INT_STATUS, OHCI_INTR_RD | OHCI_INTR_RHSC);
        }
        /* ResumeDetected */
@@ -375,7 +457,17 @@ void hcdi_irq()
        /* WritebackDoneHead */
        if (flags & OHCI_INTR_WDH) {
                printf("WritebackDoneHead\n");
-               /* TODO: figure out what the linux kernel does here... */
+               /* basically the linux irq handler reverse TDs to their urbs
+                * and set done_head to null.
+                * since we are polling atm, just should do the latter task.
+                * however, this won't work for now (i don't know why...)
+                * TODO!
+                */
+#if 0
+               sync_before_read(&hcca_oh0, 256);
+               hcca_oh0.done_head = 0;
+               sync_after_write(&hcca_oh0, 256);
+#endif
        }
 
        /* TODO: handle any pending URB/ED unlinks... */