* Author: Chris Toshok <toshok@ximian.com>
*/
+#include "map.h"
+#include "mph.h"
+
#include <termios.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
+#include <errno.h>
+#if defined(HAVE_POLL_H)
+#include <poll.h>
+#elif defined(HAVE_SYS_POLL_H)
#include <sys/poll.h>
+#endif
#include <sys/ioctl.h>
-#include <errno.h>
+
+/* This is for ASYNC_*, serial_struct on linux */
+#if defined(HAVE_LINUX_SERIAL_H)
+#include <linux/serial.h>
+#endif
#include <glib.h>
#include <sys/filio.h>
#endif
+/* sys/time.h (for timeval) is required when using osx 10.3 (but not 10.4) */
+/* IOKit is a private framework in iOS, so exclude there */
+#if defined(__APPLE__) && !defined(HOST_IOS) && !defined(HOST_WATCHOS) && !defined(HOST_APPLETVOS)
+#define HAVE_IOKIT 1
+#endif
+
+#if defined(HAVE_IOKIT)
+#include <sys/time.h>
+#include <IOKit/IOKitLib.h>
+#include <IOKit/serial/IOSerialKeys.h>
+#include <IOKit/serial/ioss.h>
+#include <IOKit/IOBSD.h>
+#endif
+
/* This is a copy of System.IO.Ports.Handshake */
typedef enum {
NoneHandshake = 0,
Rts = 16 /* Request to send */
} MonoSerialSignal;
+/*
+ * Silence the compiler, we do not need these prototypes to be public, since these are only
+ * used by P/Invoke
+ */
+
+int open_serial (char *devfile);
+int close_serial (int unix_fd);
+guint32 read_serial (int fd, guchar *buffer, int offset, int count);
+int write_serial (int fd, guchar *buffer, int offset, int count, int timeout);
+int discard_buffer (int fd, gboolean input);
+gint32 get_bytes_in_buffer (int fd, gboolean input);
+gboolean is_baud_rate_legal (int baud_rate);
+int setup_baud_rate (int baud_rate, gboolean *custom_baud_rate);
+gboolean set_attributes (int fd, int baud_rate, MonoParity parity, int dataBits, MonoStopBits stopBits, MonoHandshake handshake);
+MonoSerialSignal get_signals (int fd, gint32 *error);
+gint32 set_signal (int fd, MonoSerialSignal signal, gboolean value);
+int breakprop (int fd);
+gboolean poll_serial (int fd, gint32 *error, int timeout);
+void *list_serial_devices (void);
+
int
-open_serial (char* devfile)
+open_serial (char *devfile)
{
int fd;
- struct termios newtio;
-
- fd = open (devfile, O_RDWR);
-
- if (fd == -1)
- return -1;
-
- newtio.c_cflag = CLOCAL | CREAD;
- newtio.c_iflag = 0;
- newtio.c_oflag = 0;
- newtio.c_lflag = 0;
-
- tcflush(fd, TCIOFLUSH);
- tcsetattr(fd,TCSANOW,&newtio);
+ fd = open (devfile, O_RDWR | O_NOCTTY | O_NONBLOCK);
return fd;
}
-void
+int
close_serial (int unix_fd)
{
- close (unix_fd);
+ // Linus writes: do not retry close after EINTR
+ return close (unix_fd);
}
guint32
return (guint32) n;
}
-void
+int
write_serial (int fd, guchar *buffer, int offset, int count, int timeout)
{
+ struct pollfd pinfo;
guint32 n;
- struct pollfd ufd;
-
- ufd.fd = fd;
- ufd.events = POLLHUP | POLLOUT | POLLERR;
-
- poll (&ufd, 1, timeout);
-
- if ((ufd.revents & POLLOUT) != POLLOUT) {
- return;
+ pinfo.fd = fd;
+ pinfo.events = POLLOUT;
+ pinfo.revents = POLLOUT;
+
+ n = count;
+
+ while (n > 0)
+ {
+ ssize_t t;
+
+ if (timeout != 0) {
+ int c;
+
+ while ((c = poll (&pinfo, 1, timeout)) == -1 && errno == EINTR)
+ ;
+ if (c == -1)
+ return -1;
+ }
+
+ do {
+ t = write (fd, buffer + offset, n);
+ } while (t == -1 && errno == EINTR);
+
+ if (t < 0)
+ return -1;
+
+ offset += t;
+ n -= t;
}
- n = write (fd, buffer + offset, count);
+ return 0;
}
-void
+int
discard_buffer (int fd, gboolean input)
{
- tcflush(fd, input ? TCIFLUSH : TCOFLUSH);
+ return tcflush(fd, input ? TCIFLUSH : TCOFLUSH);
}
gint32
get_bytes_in_buffer (int fd, gboolean input)
{
+#if defined(__HAIKU__)
+ /* FIXME: Haiku doesn't support TIOCOUTQ nor FIONREAD on fds */
+ return -1;
+#define TIOCOUTQ 0
+#endif
gint32 retval;
if (ioctl (fd, input ? FIONREAD : TIOCOUTQ, &retval) == -1) {
}
gboolean
-set_attributes (int fd, int baud_rate, MonoParity parity, int dataBits, MonoStopBits stopBits, MonoHandshake handshake)
+is_baud_rate_legal (int baud_rate)
{
- struct termios newtio;
+ gboolean ignore = FALSE;
+ return setup_baud_rate (baud_rate, &ignore) != -1;
+}
- tcgetattr (fd, &newtio);
-
- switch (baud_rate) {
- case 230400: baud_rate = B230400; break;
- case 115200: baud_rate = B115200; break;
- case 57600: baud_rate = B57600; break;
- case 38400: baud_rate = B38400; break;
- case 19200: baud_rate = B19200; break;
- case 9600: baud_rate = B9600; break;
- case 4800: baud_rate = B4800; break;
- case 2400: baud_rate = B2400; break;
- case 1800: baud_rate = B1800; break;
- case 1200: baud_rate = B1200; break;
- case 600: baud_rate = B600; break;
- case 300: baud_rate = B300; break;
- case 200: baud_rate = B200; break;
- case 150: baud_rate = B150; break;
- case 134: baud_rate = B134; break;
- case 110: baud_rate = B110; break;
- case 75: baud_rate = B75; break;
- case 50:
- case 0:
- default:
+int
+setup_baud_rate (int baud_rate, gboolean *custom_baud_rate)
+{
+ switch (baud_rate)
+ {
+/*Some values are not defined on OSX and *BSD */
+#if defined(B921600)
+ case 921600:
+ baud_rate = B921600;
+ break;
+#endif
+#if defined(B460800)
+ case 460800:
+ baud_rate = B460800;
+ break;
+#endif
+ case 230400:
+ baud_rate = B230400;
+ break;
+ case 115200:
+ baud_rate = B115200;
+ break;
+ case 57600:
+ baud_rate = B57600;
+ break;
+ case 38400:
+ baud_rate = B38400;
+ break;
+ case 19200:
+ baud_rate = B19200;
+ break;
+ case 9600:
baud_rate = B9600;
break;
- }
-
- switch (parity) {
- case NoneParity: /* None */
- newtio.c_iflag |= IGNPAR;
- newtio.c_cflag &= ~(PARENB | PARODD);
+ case 4800:
+ baud_rate = B4800;
break;
- case Odd: /* Odd */
- newtio.c_iflag &= ~IGNPAR;
- newtio.c_cflag |= PARENB | PARODD;
+ case 2400:
+ baud_rate = B2400;
break;
- case Even: /* Even */
- newtio.c_iflag &= ~(IGNPAR | PARODD);
- newtio.c_cflag |= PARENB;
+ case 1800:
+ baud_rate = B1800;
break;
- case Mark: /* Mark */
- /* XXX unhandled */
+ case 1200:
+ baud_rate = B1200;
break;
- case Space: /* Space */
- /* XXX unhandled */
+ case 600:
+ baud_rate = B600;
+ break;
+ case 300:
+ baud_rate = B300;
+ break;
+ case 200:
+ baud_rate = B200;
+ break;
+ case 150:
+ baud_rate = B150;
+ break;
+ case 134:
+ baud_rate = B134;
+ break;
+ case 110:
+ baud_rate = B110;
+ break;
+ case 75:
+ baud_rate = B75;
+ break;
+ case 50:
+#ifdef B50
+ baud_rate = B50;
+#else
+ baud_rate = -1;
+ break;
+#endif
+ case 0:
+#ifdef B0
+ baud_rate = B0;
+#else
+ baud_rate = -1;
+#endif
+ break;
+ default:
+ *custom_baud_rate = TRUE;
break;
}
+ return baud_rate;
+}
+
+gboolean
+set_attributes (int fd, int baud_rate, MonoParity parity, int dataBits, MonoStopBits stopBits, MonoHandshake handshake)
+{
+ struct termios newtio;
+ gboolean custom_baud_rate = FALSE;
+
+ if (tcgetattr (fd, &newtio) == -1)
+ return FALSE;
+
+ newtio.c_cflag |= (CLOCAL | CREAD);
+ newtio.c_lflag &= ~(ICANON | ECHO | ECHOE | ECHOK | ECHONL | ISIG | IEXTEN );
+ newtio.c_oflag &= ~(OPOST);
+ newtio.c_iflag = IGNBRK;
+ /* setup baudrate */
+ baud_rate = setup_baud_rate (baud_rate, &custom_baud_rate);
+
+ /* char lenght */
newtio.c_cflag &= ~CSIZE;
- switch (dataBits) {
- case 5: newtio.c_cflag |= CS5; break;
- case 6: newtio.c_cflag |= CS6; break;
- case 7: newtio.c_cflag |= CS7; break;
+ switch (dataBits)
+ {
+ case 5:
+ newtio.c_cflag |= CS5;
+ break;
+ case 6:
+ newtio.c_cflag |= CS6;
+ break;
+ case 7:
+ newtio.c_cflag |= CS7;
+ break;
case 8:
default:
newtio.c_cflag |= CS8;
break;
}
- newtio.c_cflag &= ~CSTOPB;
- switch (stopBits) {
+ /* stopbits */
+ switch (stopBits)
+ {
case NoneStopBits:
/* Unhandled */
break;
case One: /* One */
/* do nothing, the default is one stop bit */
+ newtio.c_cflag &= ~CSTOPB;
break;
case Two: /* Two */
newtio.c_cflag |= CSTOPB;
break;
}
- newtio.c_iflag &= ~IXOFF;
- newtio.c_oflag &= ~IXON;
+ /* parity */
+ newtio.c_iflag &= ~(INPCK | ISTRIP );
+
+ switch (parity)
+ {
+ case NoneParity: /* None */
+ newtio.c_cflag &= ~(PARENB | PARODD);
+ break;
+
+ case Odd: /* Odd */
+ newtio.c_cflag |= PARENB | PARODD;
+ break;
+
+ case Even: /* Even */
+ newtio.c_cflag &= ~(PARODD);
+ newtio.c_cflag |= (PARENB);
+ break;
+
+ case Mark: /* Mark */
+ /* XXX unhandled */
+ break;
+ case Space: /* Space */
+ /* XXX unhandled */
+ break;
+ }
+
+ newtio.c_iflag &= ~(IXOFF | IXON);
#ifdef CRTSCTS
newtio.c_cflag &= ~CRTSCTS;
#endif /* def CRTSCTS */
- switch (handshake) {
+
+ switch (handshake)
+ {
case NoneHandshake: /* None */
/* do nothing */
break;
#endif /* def CRTSCTS */
/* fall through */
case XOnXOff: /* XOnXOff */
- newtio.c_iflag |= IXOFF;
- // newtio.c_oflag |= IXON;
+ newtio.c_iflag |= IXOFF | IXON;
break;
}
-
- if (cfsetospeed (&newtio, baud_rate) < 0 || cfsetispeed (&newtio, baud_rate) < 0 ||
- tcsetattr (fd, TCSADRAIN, &newtio) < 0)
+
+ if (custom_baud_rate == FALSE) {
+ if (cfsetospeed (&newtio, baud_rate) < 0 || cfsetispeed (&newtio, baud_rate) < 0)
+ return FALSE;
+ } else {
+#if __linux__ || defined(HAVE_IOKIT)
+
+ /* On Linux to set a custom baud rate, we must set the
+ * "standard" baud_rate to 38400. On Apple we set it purely
+ * so that tcsetattr has something to use (and report back later), but
+ * the Apple specific API is still opaque to these APIs, see:
+ * https://developer.apple.com/library/mac/samplecode/SerialPortSample/Listings/SerialPortSample_SerialPortSample_c.html#//apple_ref/doc/uid/DTS10000454-SerialPortSample_SerialPortSample_c-DontLinkElementID_4
+ */
+ if (cfsetospeed (&newtio, B38400) < 0 || cfsetispeed (&newtio, B38400) < 0)
+ return FALSE;
+#endif
+ }
+
+ if (tcsetattr (fd, TCSANOW, &newtio) < 0)
return FALSE;
+ if (custom_baud_rate == TRUE){
+#if defined(HAVE_LINUX_SERIAL_H)
+ struct serial_struct ser;
+
+ if (ioctl (fd, TIOCGSERIAL, &ser) < 0)
+ {
+ return FALSE;
+ }
+
+ ser.custom_divisor = ser.baud_base / baud_rate;
+ ser.flags &= ~ASYNC_SPD_MASK;
+ ser.flags |= ASYNC_SPD_CUST;
+
+ if (ioctl (fd, TIOCSSERIAL, &ser) < 0)
+ {
+ return FALSE;
+ }
+#elif defined(HAVE_IOKIT)
+ speed_t speed = baud_rate;
+ if (ioctl(fd, IOSSIOSPEED, &speed) == -1)
+ return FALSE;
+#else
+ /* Don't know how to set custom baud rate on this platform. */
+ return FALSE;
+#endif
+ }
+
return TRUE;
}
+
static gint32
get_signal_code (MonoSerialSignal signal)
{
return 1;
}
+int
+breakprop (int fd)
+{
+ return tcsendbreak (fd, 0);
+}
+
gboolean
poll_serial (int fd, gint32 *error, int timeout)
{
pinfo.events = POLLIN;
pinfo.revents = 0;
- if (poll (&pinfo, 1, timeout) == -1) {
+ while (poll (&pinfo, 1, timeout) == -1 && errno == EINTR) {
/* EINTR is an OK condition, we should not throw in the upper layer an IOException */
- if (errno == EINTR)
+ if (errno != EINTR){
+ *error = -1;
return FALSE;
- *error = -1;
- return FALSE;
+ }
}
return (pinfo.revents & POLLIN) != 0 ? 1 : 0;
projects / mono.git / blobdiff