/* * mono-threads.c: Low-level threading * * Author: * Rodrigo Kumpera (kumpera@gmail.com) * * Copyright 2011 Novell, Inc (http://www.novell.com) * Copyright 2011 Xamarin, Inc (http://www.xamarin.com) */ #include /* enable pthread extensions */ #ifdef TARGET_MACH #define _DARWIN_C_SOURCE #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__MACH__) #include #endif /* Mutex that makes sure only a single thread can be suspending others. Suspend is a very racy operation since it requires restarting until the target thread is not on an unsafe region. We could implement this using critical regions, but would be much much harder for an operation that is hardly performance critical. The GC has to acquire this lock before starting a STW to make sure a runtime suspend won't make it wronly see a thread in a safepoint when it is in fact not. */ static MonoCoopSem global_suspend_semaphore; static size_t thread_info_size; static MonoThreadInfoCallbacks threads_callbacks; static MonoThreadInfoRuntimeCallbacks runtime_callbacks; static MonoNativeTlsKey thread_info_key, thread_exited_key; #ifdef HAVE_KW_THREAD static __thread guint32 tls_small_id MONO_TLS_FAST; #else static MonoNativeTlsKey small_id_key; #endif static MonoLinkedListSet thread_list; static gboolean mono_threads_inited = FALSE; static MonoSemType suspend_semaphore; static size_t pending_suspends; static gboolean unified_suspend_enabled; #define mono_thread_info_run_state(info) (((MonoThreadInfo*)info)->thread_state & THREAD_STATE_MASK) /*warn at 50 ms*/ #define SLEEP_DURATION_BEFORE_WARNING (10) /*abort at 1 sec*/ #define SLEEP_DURATION_BEFORE_ABORT 200 static int suspend_posts, resume_posts, abort_posts, waits_done, pending_ops; void mono_threads_notify_initiator_of_abort (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-ABORT] %p\n", mono_thread_info_get_tid (info)); InterlockedIncrement (&abort_posts); mono_os_sem_post (&suspend_semaphore); } void mono_threads_notify_initiator_of_suspend (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-SUSPEND] %p\n", mono_thread_info_get_tid (info)); InterlockedIncrement (&suspend_posts); mono_os_sem_post (&suspend_semaphore); } void mono_threads_notify_initiator_of_resume (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-RESUME] %p\n", mono_thread_info_get_tid (info)); InterlockedIncrement (&resume_posts); mono_os_sem_post (&suspend_semaphore); } static gboolean begin_async_suspend (MonoThreadInfo *info, gboolean interrupt_kernel) { if (mono_threads_is_coop_enabled ()) { /* There's nothing else to do after we async request the thread to suspend */ mono_threads_add_to_pending_operation_set (info); return TRUE; } return mono_threads_core_begin_async_suspend (info, interrupt_kernel); } static gboolean check_async_suspend (MonoThreadInfo *info) { if (mono_threads_is_coop_enabled ()) { /* Async suspend can't async fail on coop */ return TRUE; } return mono_threads_core_check_suspend_result (info); } static void resume_async_suspended (MonoThreadInfo *info) { if (mono_threads_is_coop_enabled ()) g_assert_not_reached (); g_assert (mono_threads_core_begin_async_resume (info)); } static void resume_self_suspended (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("**BEGIN self-resume %p\n", mono_thread_info_get_tid (info)); mono_os_sem_post (&info->resume_semaphore); } void mono_thread_info_wait_for_resume (MonoThreadInfo* info) { int res; THREADS_SUSPEND_DEBUG ("**WAIT self-resume %p\n", mono_thread_info_get_tid (info)); res = mono_os_sem_wait (&info->resume_semaphore, MONO_SEM_FLAGS_NONE); g_assert (res != -1); } static void resume_blocking_suspended (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("**BEGIN blocking-resume %p\n", mono_thread_info_get_tid (info)); mono_os_sem_post (&info->resume_semaphore); } void mono_threads_add_to_pending_operation_set (MonoThreadInfo* info) { THREADS_SUSPEND_DEBUG ("added %p to pending suspend\n", mono_thread_info_get_tid (info)); ++pending_suspends; InterlockedIncrement (&pending_ops); } void mono_threads_begin_global_suspend (void) { size_t ps = pending_suspends; if (G_UNLIKELY (ps != 0)) g_error ("pending_suspends = %d, but must be 0", ps); THREADS_SUSPEND_DEBUG ("------ BEGIN GLOBAL OP sp %d rp %d ap %d wd %d po %d (sp + rp + ap == wd) (wd == po)\n", suspend_posts, resume_posts, abort_posts, waits_done, pending_ops); g_assert ((suspend_posts + resume_posts + abort_posts) == waits_done); mono_threads_coop_begin_global_suspend (); } void mono_threads_end_global_suspend (void) { size_t ps = pending_suspends; if (G_UNLIKELY (ps != 0)) g_error ("pending_suspends = %d, but must be 0", ps); THREADS_SUSPEND_DEBUG ("------ END GLOBAL OP sp %d rp %d ap %d wd %d po %d\n", suspend_posts, resume_posts, abort_posts, waits_done, pending_ops); g_assert ((suspend_posts + resume_posts + abort_posts) == waits_done); mono_threads_coop_end_global_suspend (); } static void dump_threads (void) { MonoThreadInfo *cur = mono_thread_info_current (); MOSTLY_ASYNC_SAFE_PRINTF ("STATE CUE CARD: (? means a positive number, usually 1 or 2, * means any number)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x0\t- starting (GOOD, unless the thread is running managed code)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x1\t- running (BAD, unless it's the gc thread)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x2\t- detached (GOOD, unless the thread is running managed code)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x?03\t- async suspended (GOOD)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x?04\t- self suspended (GOOD)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x?05\t- async suspend requested (BAD)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x?06\t- self suspend requested (BAD)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x*07\t- blocking (GOOD)\n"); MOSTLY_ASYNC_SAFE_PRINTF ("\t0x?08\t- blocking with pending suspend (GOOD)\n"); FOREACH_THREAD_SAFE (info) { #ifdef TARGET_MACH char thread_name [256] = { 0 }; pthread_getname_np (mono_thread_info_get_tid (info), thread_name, 255); MOSTLY_ASYNC_SAFE_PRINTF ("--thread %p id %p [%p] (%s) state %x %s\n", info, (void *) mono_thread_info_get_tid (info), (void*)(size_t)info->native_handle, thread_name, info->thread_state, info == cur ? "GC INITIATOR" : "" ); #else MOSTLY_ASYNC_SAFE_PRINTF ("--thread %p id %p [%p] state %x %s\n", info, (void *) mono_thread_info_get_tid (info), (void*)(size_t)info->native_handle, info->thread_state, info == cur ? "GC INITIATOR" : "" ); #endif } FOREACH_THREAD_SAFE_END } gboolean mono_threads_wait_pending_operations (void) { int i; int c = pending_suspends; /* Wait threads to park */ THREADS_SUSPEND_DEBUG ("[INITIATOR-WAIT-COUNT] %d\n", c); if (pending_suspends) { MonoStopwatch suspension_time; mono_stopwatch_start (&suspension_time); for (i = 0; i < pending_suspends; ++i) { THREADS_SUSPEND_DEBUG ("[INITIATOR-WAIT-WAITING]\n"); InterlockedIncrement (&waits_done); if (!mono_os_sem_timedwait (&suspend_semaphore, SLEEP_DURATION_BEFORE_ABORT, MONO_SEM_FLAGS_NONE)) continue; mono_stopwatch_stop (&suspension_time); dump_threads (); MOSTLY_ASYNC_SAFE_PRINTF ("WAITING for %d threads, got %d suspended\n", (int)pending_suspends, i); g_error ("suspend_thread suspend took %d ms, which is more than the allowed %d ms", (int)mono_stopwatch_elapsed_ms (&suspension_time), SLEEP_DURATION_BEFORE_ABORT); } mono_stopwatch_stop (&suspension_time); THREADS_SUSPEND_DEBUG ("Suspending %d threads took %d ms.\n", (int)pending_suspends, (int)mono_stopwatch_elapsed_ms (&suspension_time)); } pending_suspends = 0; return c > 0; } //Thread initialization code static void mono_threads_unregister_current_thread (MonoThreadInfo *info); static inline void mono_hazard_pointer_clear_all (MonoThreadHazardPointers *hp, int retain) { if (retain != 0) mono_hazard_pointer_clear (hp, 0); if (retain != 1) mono_hazard_pointer_clear (hp, 1); if (retain != 2) mono_hazard_pointer_clear (hp, 2); } /* If return non null Hazard Pointer 1 holds the return value. */ MonoThreadInfo* mono_thread_info_lookup (MonoNativeThreadId id) { MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); if (!mono_lls_find (&thread_list, hp, (uintptr_t)id, HAZARD_FREE_ASYNC_CTX)) { mono_hazard_pointer_clear_all (hp, -1); return NULL; } mono_hazard_pointer_clear_all (hp, 1); return (MonoThreadInfo *) mono_hazard_pointer_get_val (hp, 1); } static gboolean mono_thread_info_insert (MonoThreadInfo *info) { MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); if (!mono_lls_insert (&thread_list, hp, (MonoLinkedListSetNode*)info, HAZARD_FREE_SAFE_CTX)) { mono_hazard_pointer_clear_all (hp, -1); return FALSE; } mono_hazard_pointer_clear_all (hp, -1); return TRUE; } static gboolean mono_thread_info_remove (MonoThreadInfo *info) { MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); gboolean res; THREADS_DEBUG ("removing info %p\n", info); res = mono_lls_remove (&thread_list, hp, (MonoLinkedListSetNode*)info, HAZARD_FREE_SAFE_CTX); mono_hazard_pointer_clear_all (hp, -1); return res; } static void free_thread_info (gpointer mem) { MonoThreadInfo *info = (MonoThreadInfo *) mem; mono_os_sem_destroy (&info->resume_semaphore); mono_threads_platform_free (info); g_free (info); } int mono_thread_info_register_small_id (void) { int small_id = mono_thread_small_id_alloc (); #ifdef HAVE_KW_THREAD tls_small_id = small_id; #else mono_native_tls_set_value (small_id_key, GUINT_TO_POINTER (small_id + 1)); #endif return small_id; } static void* register_thread (MonoThreadInfo *info, gpointer baseptr) { size_t stsize = 0; guint8 *staddr = NULL; int small_id = mono_thread_info_register_small_id (); gboolean result; mono_thread_info_set_tid (info, mono_native_thread_id_get ()); info->small_id = small_id; mono_os_sem_init (&info->resume_semaphore, 0); /*set TLS early so SMR works */ mono_native_tls_set_value (thread_info_key, info); THREADS_DEBUG ("registering info %p tid %p small id %x\n", info, mono_thread_info_get_tid (info), info->small_id); if (threads_callbacks.thread_register) { if (threads_callbacks.thread_register (info, baseptr) == NULL) { // g_warning ("thread registation failed\n"); g_free (info); return NULL; } } mono_thread_info_get_stack_bounds (&staddr, &stsize); g_assert (staddr); g_assert (stsize); info->stack_start_limit = staddr; info->stack_end = staddr + stsize; info->stackdata = g_byte_array_new (); mono_threads_platform_register (info); /* Transition it before taking any locks or publishing itself to reduce the chance of others witnessing a detached thread. We can reasonably expect that until this thread gets published, no other thread will try to manipulate it. */ mono_threads_transition_attach (info); mono_thread_info_suspend_lock (); /*If this fail it means a given thread has been registered twice, which doesn't make sense. */ result = mono_thread_info_insert (info); g_assert (result); mono_thread_info_suspend_unlock (); return info; } static void unregister_thread (void *arg) { MonoThreadInfo *info = (MonoThreadInfo *) arg; int small_id = info->small_id; g_assert (info); THREADS_DEBUG ("unregistering info %p\n", info); mono_native_tls_set_value (thread_exited_key, GUINT_TO_POINTER (1)); mono_threads_core_unregister (info); /* * TLS destruction order is not reliable so small_id might be cleaned up * before us. */ #ifndef HAVE_KW_THREAD mono_native_tls_set_value (small_id_key, GUINT_TO_POINTER (info->small_id + 1)); #endif /* First perform the callback that requires no locks. This callback has the potential of taking other locks, so we do it before. After it completes, the thread remains functional. */ if (threads_callbacks.thread_detach) threads_callbacks.thread_detach (info); mono_thread_info_suspend_lock (); /* Now perform the callback that must be done under locks. This will render the thread useless and non-suspendable, so it must be done while holding the suspend lock to give no other thread chance to suspend it. */ if (threads_callbacks.thread_unregister) threads_callbacks.thread_unregister (info); mono_threads_unregister_current_thread (info); mono_threads_transition_detach (info); mono_thread_info_suspend_unlock (); g_byte_array_free (info->stackdata, /*free_segment=*/TRUE); /*now it's safe to free the thread info.*/ mono_thread_hazardous_free_or_queue (info, free_thread_info, HAZARD_FREE_MAY_LOCK, HAZARD_FREE_SAFE_CTX); mono_thread_small_id_free (small_id); } static void thread_exited_dtor (void *arg) { #if defined(__MACH__) /* * Since we use pthread dtors to clean up thread data, if a thread * is attached to the runtime by another pthread dtor after our dtor * has ran, it will never be detached, leading to various problems * since the thread ids etc. will be reused while they are still in * the threads hashtables etc. * Dtors are called in a loop until all user tls entries are 0, * but the loop has a maximum count (4), so if we set the tls * variable every time, it will remain set when system tls dtors * are ran. This allows mono_thread_info_is_exiting () to detect * whenever the thread is exiting, even if it is executed from a * system tls dtor (i.e. obj-c dealloc methods). */ mono_native_tls_set_value (thread_exited_key, GUINT_TO_POINTER (1)); #endif } /** * Removes the current thread from the thread list. * This must be called from the thread unregister callback and nowhere else. * The current thread must be passed as TLS might have already been cleaned up. */ static void mono_threads_unregister_current_thread (MonoThreadInfo *info) { gboolean result; g_assert (mono_thread_info_get_tid (info) == mono_native_thread_id_get ()); result = mono_thread_info_remove (info); g_assert (result); } MonoThreadInfo* mono_thread_info_current_unchecked (void) { return mono_threads_inited ? (MonoThreadInfo*)mono_native_tls_get_value (thread_info_key) : NULL; } MonoThreadInfo* mono_thread_info_current (void) { MonoThreadInfo *info = (MonoThreadInfo*)mono_native_tls_get_value (thread_info_key); if (info) return info; info = mono_thread_info_lookup (mono_native_thread_id_get ()); /*info on HP1*/ /* We might be called during thread cleanup, but we cannot be called after cleanup as happened. The way to distinguish between before, during and after cleanup is the following: -If the TLS key is set, cleanup has not begun; -If the TLS key is clean, but the thread remains registered, cleanup is in progress; -If the thread is nowhere to be found, cleanup has finished. We cannot function after cleanup since there's no way to ensure what will happen. */ g_assert (info); /*We're looking up the current thread which will not be freed until we finish running, so no need to keep it on a HP */ mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1); return info; } int mono_thread_info_get_small_id (void) { #ifdef HAVE_KW_THREAD return tls_small_id; #else gpointer val = mono_native_tls_get_value (small_id_key); if (!val) return -1; return GPOINTER_TO_INT (val) - 1; #endif } MonoLinkedListSet* mono_thread_info_list_head (void) { return &thread_list; } /** * mono_threads_attach_tools_thread * * Attach the current thread as a tool thread. DON'T USE THIS FUNCTION WITHOUT READING ALL DISCLAIMERS. * * A tools thread is a very special kind of thread that needs access to core runtime facilities but should * not be counted as a regular thread for high order facilities such as executing managed code or accessing * the managed heap. * * This is intended only to tools such as a profiler than needs to be able to use our lock-free support when * doing things like resolving backtraces in their background processing thread. */ void mono_threads_attach_tools_thread (void) { int dummy = 0; MonoThreadInfo *info; /* Must only be called once */ g_assert (!mono_native_tls_get_value (thread_info_key)); while (!mono_threads_inited) { mono_thread_info_usleep (10); } info = mono_thread_info_attach (&dummy); g_assert (info); info->tools_thread = TRUE; } MonoThreadInfo* mono_thread_info_attach (void *baseptr) { MonoThreadInfo *info; if (!mono_threads_inited) { #ifdef HOST_WIN32 /* This can happen from DllMain(DLL_THREAD_ATTACH) on Windows, if a * thread is created before an embedding API user initialized Mono. */ THREADS_DEBUG ("mono_thread_info_attach called before mono_threads_init\n"); return NULL; #else g_assert (mono_threads_inited); #endif } info = (MonoThreadInfo *) mono_native_tls_get_value (thread_info_key); if (!info) { info = (MonoThreadInfo *) g_malloc0 (thread_info_size); THREADS_DEBUG ("attaching %p\n", info); if (!register_thread (info, baseptr)) return NULL; } else if (threads_callbacks.thread_attach) { threads_callbacks.thread_attach (info); } return info; } void mono_thread_info_detach (void) { MonoThreadInfo *info; if (!mono_threads_inited) { /* This can happen from DllMain(THREAD_DETACH) on Windows, if a thread * is created before an embedding API user initialized Mono. */ THREADS_DEBUG ("mono_thread_info_detach called before mono_threads_init\n"); return; } info = (MonoThreadInfo *) mono_native_tls_get_value (thread_info_key); if (info) { THREADS_DEBUG ("detaching %p\n", info); unregister_thread (info); mono_native_tls_set_value (thread_info_key, NULL); } } /* * mono_thread_info_is_exiting: * * Return whenever the current thread is exiting, i.e. it is running pthread * dtors. */ gboolean mono_thread_info_is_exiting (void) { #if defined(__MACH__) if (mono_native_tls_get_value (thread_exited_key) == GUINT_TO_POINTER (1)) return TRUE; #endif return FALSE; } void mono_threads_init (MonoThreadInfoCallbacks *callbacks, size_t info_size) { gboolean res; threads_callbacks = *callbacks; thread_info_size = info_size; #ifdef HOST_WIN32 res = mono_native_tls_alloc (&thread_info_key, NULL); res = mono_native_tls_alloc (&thread_exited_key, NULL); #else res = mono_native_tls_alloc (&thread_info_key, (void *) unregister_thread); res = mono_native_tls_alloc (&thread_exited_key, (void *) thread_exited_dtor); #endif g_assert (res); #ifndef HAVE_KW_THREAD res = mono_native_tls_alloc (&small_id_key, NULL); #endif g_assert (res); unified_suspend_enabled = g_getenv ("MONO_ENABLE_UNIFIED_SUSPEND") != NULL || mono_threads_is_coop_enabled (); mono_coop_sem_init (&global_suspend_semaphore, 1); mono_os_sem_init (&suspend_semaphore, 0); mono_lls_init (&thread_list, NULL, HAZARD_FREE_NO_LOCK); mono_thread_smr_init (); mono_threads_init_platform (); mono_threads_init_coop (); mono_threads_init_abort_syscall (); #if defined(__MACH__) mono_mach_init (thread_info_key); #endif mono_threads_inited = TRUE; g_assert (sizeof (MonoNativeThreadId) <= sizeof (uintptr_t)); } void mono_threads_runtime_init (MonoThreadInfoRuntimeCallbacks *callbacks) { runtime_callbacks = *callbacks; } MonoThreadInfoRuntimeCallbacks * mono_threads_get_runtime_callbacks (void) { return &runtime_callbacks; } /* Signal that the current thread wants to be suspended. This function can be called without holding the suspend lock held. To finish suspending, call mono_suspend_check. */ void mono_thread_info_begin_self_suspend (void) { MonoThreadInfo *info = mono_thread_info_current_unchecked (); if (!info) return; THREADS_SUSPEND_DEBUG ("BEGIN SELF SUSPEND OF %p\n", info); mono_threads_transition_request_self_suspension (info); } void mono_thread_info_end_self_suspend (void) { MonoThreadInfo *info; info = mono_thread_info_current (); if (!info) return; THREADS_SUSPEND_DEBUG ("FINISH SELF SUSPEND OF %p\n", info); mono_threads_get_runtime_callbacks ()->thread_state_init (&info->thread_saved_state [SELF_SUSPEND_STATE_INDEX]); /* commit the saved state and notify others if needed */ switch (mono_threads_transition_state_poll (info)) { case SelfSuspendResumed: return; case SelfSuspendWait: mono_thread_info_wait_for_resume (info); break; case SelfSuspendNotifyAndWait: mono_threads_notify_initiator_of_suspend (info); mono_thread_info_wait_for_resume (info); mono_threads_notify_initiator_of_resume (info); break; } } static gboolean mono_thread_info_core_resume (MonoThreadInfo *info) { gboolean res = FALSE; if (info->create_suspended) { MonoNativeThreadId tid = mono_thread_info_get_tid (info); /* Have to special case this, as the normal suspend/resume pair are racy, they don't work if he resume is received before the suspend */ info->create_suspended = FALSE; mono_threads_core_resume_created (info, tid); return TRUE; } switch (mono_threads_transition_request_resume (info)) { case ResumeError: res = FALSE; break; case ResumeOk: res = TRUE; break; case ResumeInitSelfResume: resume_self_suspended (info); res = TRUE; break; case ResumeInitAsyncResume: resume_async_suspended (info); res = TRUE; break; case ResumeInitBlockingResume: resume_blocking_suspended (info); res = TRUE; break; } return res; } gboolean mono_thread_info_resume (MonoNativeThreadId tid) { gboolean result; /* don't initialize it so the compiler can catch unitilized paths. */ MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); MonoThreadInfo *info; THREADS_SUSPEND_DEBUG ("RESUMING tid %p\n", (void*)tid); mono_thread_info_suspend_lock (); info = mono_thread_info_lookup (tid); /*info on HP1*/ if (!info) { result = FALSE; goto cleanup; } result = mono_thread_info_core_resume (info); //Wait for the pending resume to finish mono_threads_wait_pending_operations (); cleanup: mono_thread_info_suspend_unlock (); mono_hazard_pointer_clear (hp, 1); return result; } gboolean mono_thread_info_begin_suspend (MonoThreadInfo *info) { switch (mono_threads_transition_request_async_suspension (info)) { case AsyncSuspendAlreadySuspended: case AsyncSuspendBlocking: return TRUE; case AsyncSuspendWait: mono_threads_add_to_pending_operation_set (info); return TRUE; case AsyncSuspendInitSuspend: return begin_async_suspend (info, FALSE); default: g_assert_not_reached (); } } gboolean mono_thread_info_begin_resume (MonoThreadInfo *info) { return mono_thread_info_core_resume (info); } gboolean mono_thread_info_check_suspend_result (MonoThreadInfo *info) { return check_async_suspend (info); } /* FIXME fix cardtable WB to be out of line and check with the runtime if the target is not the WB trampoline. Another option is to encode wb ranges in MonoJitInfo, but that is somewhat hard. */ static gboolean is_thread_in_critical_region (MonoThreadInfo *info) { MonoMethod *method; MonoJitInfo *ji; gpointer stack_start; MonoThreadUnwindState *state; /* Are we inside a system critical region? */ if (info->inside_critical_region) return TRUE; /* Are we inside a GC critical region? */ if (threads_callbacks.mono_thread_in_critical_region && threads_callbacks.mono_thread_in_critical_region (info)) { return TRUE; } /* The target thread might be shutting down and the domain might be null, which means no managed code left to run. */ state = mono_thread_info_get_suspend_state (info); if (!state->unwind_data [MONO_UNWIND_DATA_DOMAIN]) return FALSE; stack_start = MONO_CONTEXT_GET_SP (&state->ctx); /* altstack signal handler, sgen can't handle them, so we treat them as critical */ if (stack_start < info->stack_start_limit || stack_start >= info->stack_end) return TRUE; ji = mono_jit_info_table_find ( (MonoDomain *) state->unwind_data [MONO_UNWIND_DATA_DOMAIN], (char *) MONO_CONTEXT_GET_IP (&state->ctx)); if (!ji) return FALSE; method = mono_jit_info_get_method (ji); return threads_callbacks.mono_method_is_critical (method); } gboolean mono_thread_info_in_critical_location (MonoThreadInfo *info) { return is_thread_in_critical_region (info); } /* The return value is only valid until a matching mono_thread_info_resume is called */ static MonoThreadInfo* suspend_sync (MonoNativeThreadId tid, gboolean interrupt_kernel) { MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); MonoThreadInfo *info = mono_thread_info_lookup (tid); /*info on HP1*/ if (!info) return NULL; switch (mono_threads_transition_request_async_suspension (info)) { case AsyncSuspendAlreadySuspended: mono_hazard_pointer_clear (hp, 1); //XXX this is questionable we got to clean the suspend/resume nonsense of critical sections return info; case AsyncSuspendWait: mono_threads_add_to_pending_operation_set (info); break; case AsyncSuspendInitSuspend: if (!begin_async_suspend (info, interrupt_kernel)) { mono_hazard_pointer_clear (hp, 1); return NULL; } break; case AsyncSuspendBlocking: if (interrupt_kernel) mono_threads_core_abort_syscall (info); break; default: g_assert_not_reached (); } //Wait for the pending suspend to finish mono_threads_wait_pending_operations (); if (!check_async_suspend (info)) { mono_hazard_pointer_clear (hp, 1); return NULL; } return info; } static MonoThreadInfo* suspend_sync_nolock (MonoNativeThreadId id, gboolean interrupt_kernel) { MonoThreadInfo *info = NULL; int sleep_duration = 0; for (;;) { if (!(info = suspend_sync (id, interrupt_kernel))) { mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1); return NULL; } /*WARNING: We now are in interrupt context until we resume the thread. */ if (!is_thread_in_critical_region (info)) break; if (!mono_thread_info_core_resume (info)) { mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1); return NULL; } THREADS_SUSPEND_DEBUG ("RESTARTED thread tid %p\n", (void*)id); /* Wait for the pending resume to finish */ mono_threads_wait_pending_operations (); if (sleep_duration == 0) mono_thread_info_yield (); else g_usleep (sleep_duration); sleep_duration += 10; } return info; } void mono_thread_info_safe_suspend_and_run (MonoNativeThreadId id, gboolean interrupt_kernel, MonoSuspendThreadCallback callback, gpointer user_data) { int result; MonoThreadInfo *info = NULL; MonoThreadHazardPointers *hp = mono_hazard_pointer_get (); THREADS_SUSPEND_DEBUG ("SUSPENDING tid %p\n", (void*)id); /*FIXME: unify this with self-suspend*/ g_assert (id != mono_native_thread_id_get ()); /* This can block during stw */ mono_thread_info_suspend_lock (); mono_threads_begin_global_suspend (); info = suspend_sync_nolock (id, interrupt_kernel); if (!info) goto done; switch (result = callback (info, user_data)) { case MonoResumeThread: mono_hazard_pointer_set (hp, 1, info); mono_thread_info_core_resume (info); mono_threads_wait_pending_operations (); break; case KeepSuspended: break; default: g_error ("Invalid suspend_and_run callback return value %d", result); } done: mono_hazard_pointer_clear (hp, 1); mono_threads_end_global_suspend (); mono_thread_info_suspend_unlock (); } /** Inject an assynchronous call into the target thread. The target thread must be suspended and only a single async call can be setup for a given suspend cycle. This async call must cause stack unwinding as the current implementation doesn't save enough state to resume execution of the top-of-stack function. It's an acceptable limitation since this is currently used only to deliver exceptions. */ void mono_thread_info_setup_async_call (MonoThreadInfo *info, void (*target_func)(void*), void *user_data) { /* An async call can only be setup on an async suspended thread */ g_assert (mono_thread_info_run_state (info) == STATE_ASYNC_SUSPENDED); /*FIXME this is a bad assert, we probably should do proper locking and fail if one is already set*/ g_assert (!info->async_target); info->async_target = target_func; /* This is not GC tracked */ info->user_data = user_data; } /* The suspend lock is held during any suspend in progress. A GC that has safepoints must take this lock as part of its STW to make sure no unsafe pending suspend is in progress. */ void mono_thread_info_suspend_lock (void) { int res = mono_coop_sem_wait (&global_suspend_semaphore, MONO_SEM_FLAGS_NONE); g_assert (res != -1); } void mono_thread_info_suspend_unlock (void) { mono_coop_sem_post (&global_suspend_semaphore); } /* * This is a very specific function whose only purpose is to * break a given thread from socket syscalls. * * This only exists because linux won't fail a call to connect * if the underlying is closed. * * TODO We should cleanup and unify this with the other syscall abort * facility. */ void mono_thread_info_abort_socket_syscall_for_close (MonoNativeThreadId tid) { MonoThreadHazardPointers *hp; MonoThreadInfo *info; if (tid == mono_native_thread_id_get () || !mono_threads_core_needs_abort_syscall ()) return; hp = mono_hazard_pointer_get (); info = mono_thread_info_lookup (tid); if (!info) return; if (mono_thread_info_run_state (info) == STATE_DETACHED) { mono_hazard_pointer_clear (hp, 1); return; } mono_thread_info_suspend_lock (); mono_threads_begin_global_suspend (); mono_threads_core_abort_syscall (info); mono_threads_wait_pending_operations (); mono_hazard_pointer_clear (hp, 1); mono_threads_end_global_suspend (); mono_thread_info_suspend_unlock (); } gboolean mono_thread_info_unified_management_enabled (void) { return unified_suspend_enabled; } /* * mono_thread_info_set_is_async_context: * * Set whenever the current thread is in an async context. Some runtime functions might behave * differently while in an async context in order to be async safe. */ void mono_thread_info_set_is_async_context (gboolean async_context) { MonoThreadInfo *info = mono_thread_info_current (); if (info) info->is_async_context = async_context; } gboolean mono_thread_info_is_async_context (void) { MonoThreadInfo *info = mono_thread_info_current (); if (info) return info->is_async_context; else return FALSE; } /* * mono_threads_create_thread: * * Create a new thread executing START with argument ARG. Store its id into OUT_TID. * Returns: a windows or io-layer handle for the thread. */ HANDLE mono_threads_create_thread (LPTHREAD_START_ROUTINE start, gpointer arg, guint32 stack_size, guint32 creation_flags, MonoNativeThreadId *out_tid) { return mono_threads_core_create_thread (start, arg, stack_size, creation_flags, out_tid); } /* * mono_thread_info_get_stack_bounds: * * Return the address and size of the current threads stack. Return NULL as the * stack address if the stack address cannot be determined. */ void mono_thread_info_get_stack_bounds (guint8 **staddr, size_t *stsize) { guint8 *current = (guint8 *)&stsize; mono_threads_core_get_stack_bounds (staddr, stsize); if (!*staddr) return; /* Sanity check the result */ g_assert ((current > *staddr) && (current < *staddr + *stsize)); /* When running under emacs, sometimes staddr is not aligned to a page size */ *staddr = (guint8*)((gssize)*staddr & ~(mono_pagesize () - 1)); } gboolean mono_thread_info_yield (void) { return mono_threads_core_yield (); } static mono_lazy_init_t sleep_init = MONO_LAZY_INIT_STATUS_NOT_INITIALIZED; static MonoCoopMutex sleep_mutex; static MonoCoopCond sleep_cond; static void sleep_initialize (void) { mono_coop_mutex_init (&sleep_mutex); mono_coop_cond_init (&sleep_cond); } static void sleep_interrupt (gpointer data) { mono_coop_mutex_lock (&sleep_mutex); mono_coop_cond_broadcast (&sleep_cond); mono_coop_mutex_unlock (&sleep_mutex); } static inline guint32 sleep_interruptable (guint32 ms, gboolean *alerted) { gint64 now, end; g_assert (INFINITE == G_MAXUINT32); g_assert (alerted); *alerted = FALSE; if (ms != INFINITE) end = mono_100ns_ticks () + (ms * 1000 * 10); mono_lazy_initialize (&sleep_init, sleep_initialize); mono_coop_mutex_lock (&sleep_mutex); for (;;) { if (ms != INFINITE) { now = mono_100ns_ticks (); if (now > end) break; } mono_thread_info_install_interrupt (sleep_interrupt, NULL, alerted); if (*alerted) { mono_coop_mutex_unlock (&sleep_mutex); return WAIT_IO_COMPLETION; } if (ms != INFINITE) mono_coop_cond_timedwait (&sleep_cond, &sleep_mutex, (end - now) / 10 / 1000); else mono_coop_cond_wait (&sleep_cond, &sleep_mutex); mono_thread_info_uninstall_interrupt (alerted); if (*alerted) { mono_coop_mutex_unlock (&sleep_mutex); return WAIT_IO_COMPLETION; } } mono_coop_mutex_unlock (&sleep_mutex); return 0; } gint mono_thread_info_sleep (guint32 ms, gboolean *alerted) { if (ms == 0) { MonoThreadInfo *info; mono_thread_info_yield (); info = mono_thread_info_current (); if (info && mono_thread_info_is_interrupt_state (info)) return WAIT_IO_COMPLETION; return 0; } if (alerted) return sleep_interruptable (ms, alerted); MONO_PREPARE_BLOCKING; if (ms == INFINITE) { do { #ifdef HOST_WIN32 Sleep (G_MAXUINT32); #else sleep (G_MAXUINT32); #endif } while (1); } else { int ret; #if defined (__linux__) && !defined(PLATFORM_ANDROID) struct timespec start, target; /* Use clock_nanosleep () to prevent time drifting problems when nanosleep () is interrupted by signals */ ret = clock_gettime (CLOCK_MONOTONIC, &start); g_assert (ret == 0); target = start; target.tv_sec += ms / 1000; target.tv_nsec += (ms % 1000) * 1000000; if (target.tv_nsec > 999999999) { target.tv_nsec -= 999999999; target.tv_sec ++; } do { ret = clock_nanosleep (CLOCK_MONOTONIC, TIMER_ABSTIME, &target, NULL); } while (ret != 0); #elif HOST_WIN32 Sleep (ms); #else struct timespec req, rem; req.tv_sec = ms / 1000; req.tv_nsec = (ms % 1000) * 1000000; do { memset (&rem, 0, sizeof (rem)); ret = nanosleep (&req, &rem); } while (ret != 0); #endif /* __linux__ */ } MONO_FINISH_BLOCKING; return 0; } gint mono_thread_info_usleep (guint64 us) { MONO_PREPARE_BLOCKING; g_usleep (us); MONO_FINISH_BLOCKING; return 0; } gpointer mono_thread_info_tls_get (THREAD_INFO_TYPE *info, MonoTlsKey key) { return ((MonoThreadInfo*)info)->tls [key]; } /* * mono_threads_info_tls_set: * * Set the TLS key to VALUE in the info structure. This can be used to obtain * values of TLS variables for threads other than the current thread. * This should only be used for infrequently changing TLS variables, and it should * be paired with setting the real TLS variable since this provides no GC tracking. */ void mono_thread_info_tls_set (THREAD_INFO_TYPE *info, MonoTlsKey key, gpointer value) { ((MonoThreadInfo*)info)->tls [key] = value; } /* * mono_thread_info_exit: * * Exit the current thread. * This function doesn't return. */ void mono_thread_info_exit (void) { mono_threads_core_exit (0); } /* * mono_thread_info_open_handle: * * Return a io-layer/win32 handle for the current thread. * The handle need to be closed by calling CloseHandle () when it is no * longer needed. */ HANDLE mono_thread_info_open_handle (void) { return mono_threads_core_open_handle (); } /* * mono_threads_open_thread_handle: * * Return a io-layer/win32 handle for the thread identified by HANDLE/TID. * The handle need to be closed by calling CloseHandle () when it is no * longer needed. */ HANDLE mono_threads_open_thread_handle (HANDLE handle, MonoNativeThreadId tid) { return mono_threads_core_open_thread_handle (handle, tid); } void mono_thread_info_set_name (MonoNativeThreadId tid, const char *name) { mono_threads_core_set_name (tid, name); } #define INTERRUPT_STATE ((MonoThreadInfoInterruptToken*) (size_t) -1) struct _MonoThreadInfoInterruptToken { void (*callback) (gpointer data); gpointer data; }; /* * mono_thread_info_install_interrupt: install an interruption token for the current thread. * * - @callback: must be able to be called from another thread and always cancel the wait * - @data: passed to the callback * - @interrupted: will be set to TRUE if a token is already installed, FALSE otherwise * if set to TRUE, it must mean that the thread is in interrupted state */ void mono_thread_info_install_interrupt (void (*callback) (gpointer data), gpointer data, gboolean *interrupted) { MonoThreadInfo *info; MonoThreadInfoInterruptToken *previous_token, *token; g_assert (callback); g_assert (interrupted); *interrupted = FALSE; info = mono_thread_info_current (); g_assert (info); /* The memory of this token can be freed at 2 places: * - if the token is not interrupted: it will be freed in uninstall, as info->interrupt_token has not been replaced * by the INTERRUPT_STATE flag value, and it still contains the pointer to the memory location * - if the token is interrupted: it will be freed in finish, as the token is now owned by the prepare/finish * functions, and info->interrupt_token does not contains a pointer to the memory anymore */ token = g_new0 (MonoThreadInfoInterruptToken, 1); token->callback = callback; token->data = data; previous_token = (MonoThreadInfoInterruptToken *)InterlockedCompareExchangePointer ((gpointer*) &info->interrupt_token, token, NULL); if (previous_token) { if (previous_token != INTERRUPT_STATE) g_error ("mono_thread_info_install_interrupt: previous_token should be INTERRUPT_STATE (%p), but it was %p", INTERRUPT_STATE, previous_token); g_free (token); *interrupted = TRUE; } THREADS_INTERRUPT_DEBUG ("interrupt install tid %p token %p previous_token %p interrupted %s\n", mono_thread_info_get_tid (info), token, previous_token, *interrupted ? "TRUE" : "FALSE"); } void mono_thread_info_uninstall_interrupt (gboolean *interrupted) { MonoThreadInfo *info; MonoThreadInfoInterruptToken *previous_token; g_assert (interrupted); *interrupted = FALSE; info = mono_thread_info_current (); g_assert (info); previous_token = (MonoThreadInfoInterruptToken *)InterlockedExchangePointer ((gpointer*) &info->interrupt_token, NULL); /* only the installer can uninstall the token */ g_assert (previous_token); if (previous_token == INTERRUPT_STATE) { /* if it is interrupted, then it is going to be freed in finish interrupt */ *interrupted = TRUE; } else { g_free (previous_token); } THREADS_INTERRUPT_DEBUG ("interrupt uninstall tid %p previous_token %p interrupted %s\n", mono_thread_info_get_tid (info), previous_token, *interrupted ? "TRUE" : "FALSE"); } static MonoThreadInfoInterruptToken* set_interrupt_state (MonoThreadInfo *info) { MonoThreadInfoInterruptToken *token, *previous_token; g_assert (info); /* Atomically obtain the token the thread is * waiting on, and change it to a flag value. */ do { previous_token = info->interrupt_token; /* Already interrupted */ if (previous_token == INTERRUPT_STATE) { token = NULL; break; } token = previous_token; } while (InterlockedCompareExchangePointer ((gpointer*) &info->interrupt_token, INTERRUPT_STATE, previous_token) != previous_token); return token; } /* * mono_thread_info_prepare_interrupt: * * The state of the thread info interrupt token is set to 'interrupted' which means that : * - if the thread calls one of the WaitFor functions, the function will return with * WAIT_IO_COMPLETION instead of waiting * - if the thread was waiting when this function was called, the wait will be broken * * It is possible that the wait functions return WAIT_IO_COMPLETION, but the target thread * didn't receive the interrupt signal yet, in this case it should call the wait function * again. This essentially means that the target thread will busy wait until it is ready to * process the interruption. */ MonoThreadInfoInterruptToken* mono_thread_info_prepare_interrupt (MonoThreadInfo *info) { MonoThreadInfoInterruptToken *token; token = set_interrupt_state (info); THREADS_INTERRUPT_DEBUG ("interrupt prepare tid %p token %p\n", mono_thread_info_get_tid (info), token); return token; } void mono_thread_info_finish_interrupt (MonoThreadInfoInterruptToken *token) { THREADS_INTERRUPT_DEBUG ("interrupt finish token %p\n", token); if (token == NULL) return; g_assert (token->callback); token->callback (token->data); g_free (token); } void mono_thread_info_self_interrupt (void) { MonoThreadInfo *info; MonoThreadInfoInterruptToken *token; info = mono_thread_info_current (); g_assert (info); token = set_interrupt_state (info); g_assert (!token); THREADS_INTERRUPT_DEBUG ("interrupt self tid %p\n", mono_thread_info_get_tid (info)); } /* Clear the interrupted flag of the current thread, set with * mono_thread_info_self_interrupt, so it can wait again */ void mono_thread_info_clear_self_interrupt () { MonoThreadInfo *info; MonoThreadInfoInterruptToken *previous_token; info = mono_thread_info_current (); g_assert (info); previous_token = (MonoThreadInfoInterruptToken *)InterlockedCompareExchangePointer ((gpointer*) &info->interrupt_token, NULL, INTERRUPT_STATE); g_assert (previous_token == NULL || previous_token == INTERRUPT_STATE); THREADS_INTERRUPT_DEBUG ("interrupt clear self tid %p previous_token %p\n", mono_thread_info_get_tid (info), previous_token); } gboolean mono_thread_info_is_interrupt_state (MonoThreadInfo *info) { g_assert (info); return InterlockedReadPointer ((gpointer*) &info->interrupt_token) == INTERRUPT_STATE; } void mono_thread_info_describe_interrupt_token (MonoThreadInfo *info, GString *text) { g_assert (info); if (!InterlockedReadPointer ((gpointer*) &info->interrupt_token)) g_string_append_printf (text, "not waiting"); else if (InterlockedReadPointer ((gpointer*) &info->interrupt_token) == INTERRUPT_STATE) g_string_append_printf (text, "interrupted state"); else g_string_append_printf (text, "waiting"); } /* info must be self or be held in a hazard pointer. */ gboolean mono_threads_add_async_job (MonoThreadInfo *info, MonoAsyncJob job) { MonoAsyncJob old_job; do { old_job = (MonoAsyncJob) info->service_requests; if (old_job & job) return FALSE; } while (InterlockedCompareExchange (&info->service_requests, old_job | job, old_job) != old_job); return TRUE; } MonoAsyncJob mono_threads_consume_async_jobs (void) { MonoThreadInfo *info = (MonoThreadInfo*)mono_native_tls_get_value (thread_info_key); if (!info) return (MonoAsyncJob) 0; return (MonoAsyncJob) InterlockedExchange (&info->service_requests, 0); }