X-Git-Url: http://wien.tomnetworks.com/gitweb/?p=hs-boehmgc.git;a=blobdiff_plain;f=gc-7.2%2Finclude%2Fgc.h;fp=gc-7.2%2Finclude%2Fgc.h;h=59695b97dea89f0ee8fb405ab9bad7210e235dfc;hp=0000000000000000000000000000000000000000;hb=324587ba93dc77f37406d41fd2a20d0e0d94fb1d;hpb=2a4ea609491b225a1ceb06da70396e93916f137a diff --git a/gc-7.2/include/gc.h b/gc-7.2/include/gc.h new file mode 100644 index 0000000..59695b9 --- /dev/null +++ b/gc-7.2/include/gc.h @@ -0,0 +1,1508 @@ +/* + * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers + * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved. + * Copyright 1996-1999 by Silicon Graphics. All rights reserved. + * Copyright 1999 by Hewlett-Packard Company. All rights reserved. + * Copyright (C) 2007 Free Software Foundation, Inc + * Copyright (c) 2000-2011 by Hewlett-Packard Development Company. + * + * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED + * OR IMPLIED. ANY USE IS AT YOUR OWN RISK. + * + * Permission is hereby granted to use or copy this program + * for any purpose, provided the above notices are retained on all copies. + * Permission to modify the code and to distribute modified code is granted, + * provided the above notices are retained, and a notice that the code was + * modified is included with the above copyright notice. + */ + +/* + * Note that this defines a large number of tuning hooks, which can + * safely be ignored in nearly all cases. For normal use it suffices + * to call only GC_MALLOC and perhaps GC_REALLOC. + * For better performance, also look at GC_MALLOC_ATOMIC, and + * GC_enable_incremental. If you need an action to be performed + * immediately before an object is collected, look at GC_register_finalizer. + * If you are using Solaris threads, look at the end of this file. + * Everything else is best ignored unless you encounter performance + * problems. + */ + +#ifndef GC_H +#define GC_H + +#include "gc_version.h" + /* Define version numbers here to allow test on build machine */ + /* for cross-builds. Note that this defines the header */ + /* version number, which may or may not match that of the */ + /* dynamic library. GC_get_version() can be used to obtain */ + /* the latter. */ + +#include "gc_config_macros.h" + +#ifdef __cplusplus + extern "C" { +#endif + +typedef void * GC_PTR; /* preserved only for backward compatibility */ + +/* Define word and signed_word to be unsigned and signed types of the */ +/* size as char * or void *. There seems to be no way to do this */ +/* even semi-portably. The following is probably no better/worse */ +/* than almost anything else. */ +/* The ANSI standard suggests that size_t and ptrdiff_t might be */ +/* better choices. But those had incorrect definitions on some older */ +/* systems. Notably "typedef int size_t" is WRONG. */ +#ifdef _WIN64 +# ifdef __int64 + typedef unsigned __int64 GC_word; + typedef __int64 GC_signed_word; +# else + typedef unsigned long long GC_word; + typedef long long GC_signed_word; +# endif +#else + typedef unsigned long GC_word; + typedef long GC_signed_word; +#endif + +/* Get the GC library version. The returned value is a constant in the */ +/* form: ((version_major<<16) | (version_minor<<8) | alpha_version). */ +GC_API unsigned GC_CALL GC_get_version(void); + +/* Public read-only variables */ +/* The supplied getter functions are preferred for new code. */ + +GC_API GC_word GC_gc_no;/* Counter incremented per collection. */ + /* Includes empty GCs at startup. */ +GC_API GC_word GC_CALL GC_get_gc_no(void); + /* GC_get_gc_no() is unsynchronized, so */ + /* it requires GC_call_with_alloc_lock() to */ + /* avoid data races on multiprocessors. */ + +#ifdef GC_THREADS + GC_API int GC_parallel; + /* GC is parallelized for performance on */ + /* multiprocessors. Currently set only */ + /* implicitly if collector is built with */ + /* PARALLEL_MARK defined and if either: */ + /* Env variable GC_NPROC is set to > 1, or */ + /* GC_NPROC is not set and this is an MP. */ + /* If GC_parallel is set, incremental */ + /* collection is only partially functional, */ + /* and may not be desirable. This getter does */ + /* not use or need synchronization (i.e. */ + /* acquiring the GC lock). */ + GC_API int GC_CALL GC_get_parallel(void); +#endif + + +/* Public R/W variables */ +/* The supplied setter and getter functions are preferred for new code. */ + +typedef void * (GC_CALLBACK * GC_oom_func)(size_t /* bytes_requested */); +GC_API GC_oom_func GC_oom_fn; + /* When there is insufficient memory to satisfy */ + /* an allocation request, we return */ + /* (*GC_oom_fn)(size). By default this just */ + /* returns NULL. */ + /* If it returns, it must return 0 or a valid */ + /* pointer to a previously allocated heap */ + /* object. GC_oom_fn must not be 0. */ + /* Both the supplied setter and the getter */ + /* acquire the GC lock (to avoid data races). */ +GC_API void GC_CALL GC_set_oom_fn(GC_oom_func); +GC_API GC_oom_func GC_CALL GC_get_oom_fn(void); + +GC_API int GC_find_leak; + /* Do not actually garbage collect, but simply */ + /* report inaccessible memory that was not */ + /* deallocated with GC_free. Initial value */ + /* is determined by FIND_LEAK macro. */ + /* The value should not typically be modified */ + /* after GC initialization (and, thus, it does */ + /* not use or need synchronization). */ +GC_API void GC_CALL GC_set_find_leak(int); +GC_API int GC_CALL GC_get_find_leak(void); + +GC_API int GC_all_interior_pointers; + /* Arrange for pointers to object interiors to */ + /* be recognized as valid. Typically should */ + /* not be changed after GC initialization (in */ + /* case of calling it after the GC is */ + /* initialized, the setter acquires the GC lock */ + /* (to avoid data races). The initial value */ + /* depends on whether the GC is built with */ + /* ALL_INTERIOR_POINTERS macro defined or not. */ + /* Unless DONT_ADD_BYTE_AT_END is defined, this */ + /* also affects whether sizes are increased by */ + /* at least a byte to allow "off the end" */ + /* pointer recognition. Must be only 0 or 1. */ +GC_API void GC_CALL GC_set_all_interior_pointers(int); +GC_API int GC_CALL GC_get_all_interior_pointers(void); + +GC_API int GC_finalize_on_demand; + /* If nonzero, finalizers will only be run in */ + /* response to an explicit GC_invoke_finalizers */ + /* call. The default is determined by whether */ + /* the FINALIZE_ON_DEMAND macro is defined */ + /* when the collector is built. */ + /* The setter and getter are unsynchronized. */ +GC_API void GC_CALL GC_set_finalize_on_demand(int); +GC_API int GC_CALL GC_get_finalize_on_demand(void); + +GC_API int GC_java_finalization; + /* Mark objects reachable from finalizable */ + /* objects in a separate post-pass. This makes */ + /* it a bit safer to use non-topologically- */ + /* ordered finalization. Default value is */ + /* determined by JAVA_FINALIZATION macro. */ + /* Enables register_finalizer_unreachable to */ + /* work correctly. */ + /* The setter and getter are unsynchronized. */ +GC_API void GC_CALL GC_set_java_finalization(int); +GC_API int GC_CALL GC_get_java_finalization(void); + +typedef void (GC_CALLBACK * GC_finalizer_notifier_proc)(void); +GC_API GC_finalizer_notifier_proc GC_finalizer_notifier; + /* Invoked by the collector when there are */ + /* objects to be finalized. Invoked at most */ + /* once per GC cycle. Never invoked unless */ + /* GC_finalize_on_demand is set. */ + /* Typically this will notify a finalization */ + /* thread, which will call GC_invoke_finalizers */ + /* in response. May be 0 (means no notifier). */ + /* Both the supplied setter and the getter */ + /* acquire the GC lock (to avoid data races). */ +GC_API void GC_CALL GC_set_finalizer_notifier(GC_finalizer_notifier_proc); +GC_API GC_finalizer_notifier_proc GC_CALL GC_get_finalizer_notifier(void); + +GC_API int GC_dont_gc; /* != 0 ==> Don't collect. In versions 6.2a1+, */ + /* this overrides explicit GC_gcollect() calls. */ + /* Used as a counter, so that nested enabling */ + /* and disabling work correctly. Should */ + /* normally be updated with GC_enable() and */ + /* GC_disable() calls. Direct assignment to */ + /* GC_dont_gc is deprecated. To check whether */ + /* GC is disabled, GC_is_disabled() is */ + /* preferred for new code. */ + +GC_API int GC_dont_expand; + /* Don't expand the heap unless explicitly */ + /* requested or forced to. The setter and */ + /* getter are unsynchronized. */ +GC_API void GC_CALL GC_set_dont_expand(int); +GC_API int GC_CALL GC_get_dont_expand(void); + +GC_API int GC_use_entire_heap; + /* Causes the non-incremental collector to use the */ + /* entire heap before collecting. This was the only */ + /* option for GC versions < 5.0. This sometimes */ + /* results in more large block fragmentation, since */ + /* very large blocks will tend to get broken up */ + /* during each GC cycle. It is likely to result in a */ + /* larger working set, but lower collection */ + /* frequencies, and hence fewer instructions executed */ + /* in the collector. */ + +GC_API int GC_full_freq; /* Number of partial collections between */ + /* full collections. Matters only if */ + /* GC_incremental is set. */ + /* Full collections are also triggered if */ + /* the collector detects a substantial */ + /* increase in the number of in-use heap */ + /* blocks. Values in the tens are now */ + /* perfectly reasonable, unlike for */ + /* earlier GC versions. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ +GC_API void GC_CALL GC_set_full_freq(int); +GC_API int GC_CALL GC_get_full_freq(void); + +GC_API GC_word GC_non_gc_bytes; + /* Bytes not considered candidates for */ + /* collection. Used only to control scheduling */ + /* of collections. Updated by */ + /* GC_malloc_uncollectable and GC_free. */ + /* Wizards only. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ +GC_API void GC_CALL GC_set_non_gc_bytes(GC_word); +GC_API GC_word GC_CALL GC_get_non_gc_bytes(void); + +GC_API int GC_no_dls; + /* Don't register dynamic library data segments. */ + /* Wizards only. Should be used only if the */ + /* application explicitly registers all roots. */ + /* (In some environments like Microsoft Windows */ + /* and Apple's Darwin, this may also prevent */ + /* registration of the main data segment as part */ + /* of the root set.) */ + /* The setter and getter are unsynchronized. */ +GC_API void GC_CALL GC_set_no_dls(int); +GC_API int GC_CALL GC_get_no_dls(void); + +GC_API GC_word GC_free_space_divisor; + /* We try to make sure that we allocate at */ + /* least N/GC_free_space_divisor bytes between */ + /* collections, where N is twice the number */ + /* of traced bytes, plus the number of untraced */ + /* bytes (bytes in "atomic" objects), plus */ + /* a rough estimate of the root set size. */ + /* N approximates GC tracing work per GC. */ + /* Initially, GC_free_space_divisor = 3. */ + /* Increasing its value will use less space */ + /* but more collection time. Decreasing it */ + /* will appreciably decrease collection time */ + /* at the expense of space. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ +GC_API void GC_CALL GC_set_free_space_divisor(GC_word); +GC_API GC_word GC_CALL GC_get_free_space_divisor(void); + +GC_API GC_word GC_max_retries; + /* The maximum number of GCs attempted before */ + /* reporting out of memory after heap */ + /* expansion fails. Initially 0. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ +GC_API void GC_CALL GC_set_max_retries(GC_word); +GC_API GC_word GC_CALL GC_get_max_retries(void); + + +GC_API char *GC_stackbottom; /* Cool end of user stack. */ + /* May be set in the client prior to */ + /* calling any GC_ routines. This */ + /* avoids some overhead, and */ + /* potentially some signals that can */ + /* confuse debuggers. Otherwise the */ + /* collector attempts to set it */ + /* automatically. */ + /* For multi-threaded code, this is the */ + /* cold end of the stack for the */ + /* primordial thread. Portable clients */ + /* should use GC_get_stack_base(), */ + /* GC_call_with_gc_active() and */ + /* GC_register_my_thread() instead. */ + +GC_API int GC_dont_precollect; /* Don't collect as part of GC */ + /* initialization. Should be set only */ + /* if the client wants a chance to */ + /* manually initialize the root set */ + /* before the first collection. */ + /* Interferes with blacklisting. */ + /* Wizards only. The setter and getter */ + /* are unsynchronized (and no external */ + /* locking is needed since the value is */ + /* accessed at GC initialization only). */ +GC_API void GC_CALL GC_set_dont_precollect(int); +GC_API int GC_CALL GC_get_dont_precollect(void); + +GC_API unsigned long GC_time_limit; + /* If incremental collection is enabled, */ + /* We try to terminate collections */ + /* after this many milliseconds. Not a */ + /* hard time bound. Setting this to */ + /* GC_TIME_UNLIMITED will essentially */ + /* disable incremental collection while */ + /* leaving generational collection */ + /* enabled. */ +#define GC_TIME_UNLIMITED 999999 + /* Setting GC_time_limit to this value */ + /* will disable the "pause time exceeded"*/ + /* tests. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ +GC_API void GC_CALL GC_set_time_limit(unsigned long); +GC_API unsigned long GC_CALL GC_get_time_limit(void); + +/* Public procedures */ + +/* Set whether the GC will allocate executable memory pages or not. */ +/* A non-zero argument instructs the collector to allocate memory with */ +/* the executable flag on. Must be called before the collector is */ +/* initialized. May have no effect on some platforms. The default */ +/* value is controlled by NO_EXECUTE_PERMISSION macro (if present then */ +/* the flag is off). Portable clients should have */ +/* GC_set_pages_executable(1) call (before GC_INIT) provided they are */ +/* going to execute code on any of the GC-allocated memory objects. */ +GC_API void GC_CALL GC_set_pages_executable(int); + +/* Returns non-zero value if the GC is set to the allocate-executable */ +/* mode. The mode could be changed by GC_set_pages_executable (before */ +/* GC_INIT) unless the former has no effect on the platform. Does not */ +/* use or need synchronization (i.e. acquiring the allocator lock). */ +GC_API int GC_CALL GC_get_pages_executable(void); + +/* Overrides the default handle-fork mode. Non-zero value means GC */ +/* should install proper pthread_atfork handlers. Has effect only if */ +/* called before GC_INIT. Clients should invoke GC_set_handle_fork(1) */ +/* only if going to use fork with GC functions called in the forked */ +/* child. (Note that such client and atfork handlers activities are */ +/* not fully POSIX-compliant.) */ +GC_API void GC_CALL GC_set_handle_fork(int); + +/* Initialize the collector. Portable clients should call GC_INIT() */ +/* from the main program instead. */ +GC_API void GC_CALL GC_init(void); + +/* General purpose allocation routines, with roughly malloc calling */ +/* conv. The atomic versions promise that no relevant pointers are */ +/* contained in the object. The non-atomic versions guarantee that the */ +/* new object is cleared. GC_malloc_stubborn promises that no changes */ +/* to the object will occur after GC_end_stubborn_change has been */ +/* called on the result of GC_malloc_stubborn. GC_malloc_uncollectable */ +/* allocates an object that is scanned for pointers to collectable */ +/* objects, but is not itself collectable. The object is scanned even */ +/* if it does not appear to be reachable. GC_malloc_uncollectable and */ +/* GC_free called on the resulting object implicitly update */ +/* GC_non_gc_bytes appropriately. */ +/* Note that the GC_malloc_stubborn support doesn't really exist */ +/* anymore. MANUAL_VDB provides comparable functionality. */ +GC_API void * GC_CALL GC_malloc(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_atomic(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API char * GC_CALL GC_strdup(const char *) GC_ATTR_MALLOC; +GC_API char * GC_CALL GC_strndup(const char *, size_t) GC_ATTR_MALLOC; +GC_API void * GC_CALL GC_malloc_uncollectable(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_stubborn(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); + +/* GC_memalign() is not well tested. */ +GC_API void * GC_CALL GC_memalign(size_t /* align */, size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(2); +GC_API int GC_CALL GC_posix_memalign(void ** /* memptr */, size_t /* align */, + size_t /* lb */); + +/* Explicitly deallocate an object. Dangerous if used incorrectly. */ +/* Requires a pointer to the base of an object. */ +/* If the argument is stubborn, it should not be changeable when freed. */ +/* An object should not be enabled for finalization when it is */ +/* explicitly deallocated. */ +/* GC_free(0) is a no-op, as required by ANSI C for free. */ +GC_API void GC_CALL GC_free(void *); + +/* Stubborn objects may be changed only if the collector is explicitly */ +/* informed. The collector is implicitly informed of coming change */ +/* when such an object is first allocated. The following routines */ +/* inform the collector that an object will no longer be changed, or */ +/* that it will once again be changed. Only non-NULL pointer stores */ +/* into the object are considered to be changes. The argument to */ +/* GC_end_stubborn_change must be exactly the value returned by */ +/* GC_malloc_stubborn or passed to GC_change_stubborn. (In the second */ +/* case, it may be an interior pointer within 512 bytes of the */ +/* beginning of the objects.) There is a performance penalty for */ +/* allowing more than one stubborn object to be changed at once, but it */ +/* is acceptable to do so. The same applies to dropping stubborn */ +/* objects that are still changeable. */ +GC_API void GC_CALL GC_change_stubborn(void *); +GC_API void GC_CALL GC_end_stubborn_change(void *); + +/* Return a pointer to the base (lowest address) of an object given */ +/* a pointer to a location within the object. */ +/* I.e., map an interior pointer to the corresponding base pointer. */ +/* Note that with debugging allocation, this returns a pointer to the */ +/* actual base of the object, i.e. the debug information, not to */ +/* the base of the user object. */ +/* Return 0 if displaced_pointer doesn't point to within a valid */ +/* object. */ +/* Note that a deallocated object in the garbage collected heap */ +/* may be considered valid, even if it has been deallocated with */ +/* GC_free. */ +GC_API void * GC_CALL GC_base(void * /* displaced_pointer */); + +/* Given a pointer to the base of an object, return its size in bytes. */ +/* The returned size may be slightly larger than what was originally */ +/* requested. */ +GC_API size_t GC_CALL GC_size(const void * /* object_addr */); + +/* For compatibility with C library. This is occasionally faster than */ +/* a malloc followed by a bcopy. But if you rely on that, either here */ +/* or with the standard C library, your code is broken. In my */ +/* opinion, it shouldn't have been invented, but now we're stuck. -HB */ +/* The resulting object has the same kind as the original. */ +/* If the argument is stubborn, the result will have changes enabled. */ +/* It is an error to have changes enabled for the original object. */ +/* Follows ANSI conventions for NULL old_object. */ +GC_API void * GC_CALL GC_realloc(void * /* old_object */, + size_t /* new_size_in_bytes */) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); + +/* Explicitly increase the heap size. */ +/* Returns 0 on failure, 1 on success. */ +GC_API int GC_CALL GC_expand_hp(size_t /* number_of_bytes */); + +/* Limit the heap size to n bytes. Useful when you're debugging, */ +/* especially on systems that don't handle running out of memory well. */ +/* n == 0 ==> unbounded. This is the default. This setter function is */ +/* unsynchronized (so it might require GC_call_with_alloc_lock to avoid */ +/* data races). */ +GC_API void GC_CALL GC_set_max_heap_size(GC_word /* n */); + +/* Inform the collector that a certain section of statically allocated */ +/* memory contains no pointers to garbage collected memory. Thus it */ +/* need not be scanned. This is sometimes important if the application */ +/* maps large read/write files into the address space, which could be */ +/* mistaken for dynamic library data segments on some systems. */ +/* The section (referred to by low_address) must be pointer-aligned. */ +/* low_address must not be greater than high_address_plus_1. */ +GC_API void GC_CALL GC_exclude_static_roots(void * /* low_address */, + void * /* high_address_plus_1 */); + +/* Clear the set of root segments. Wizards only. */ +GC_API void GC_CALL GC_clear_roots(void); + +/* Add a root segment. Wizards only. */ +/* Both segment start and end are not needed to be pointer-aligned. */ +/* low_address must not be greater than high_address_plus_1. */ +GC_API void GC_CALL GC_add_roots(void * /* low_address */, + void * /* high_address_plus_1 */); + +/* Remove a root segment. Wizards only. */ +/* May be unimplemented on some platforms. */ +GC_API void GC_CALL GC_remove_roots(void * /* low_address */, + void * /* high_address_plus_1 */); + +/* Add a displacement to the set of those considered valid by the */ +/* collector. GC_register_displacement(n) means that if p was returned */ +/* by GC_malloc, then (char *)p + n will be considered to be a valid */ +/* pointer to p. N must be small and less than the size of p. */ +/* (All pointers to the interior of objects from the stack are */ +/* considered valid in any case. This applies to heap objects and */ +/* static data.) */ +/* Preferably, this should be called before any other GC procedures. */ +/* Calling it later adds to the probability of excess memory */ +/* retention. */ +/* This is a no-op if the collector has recognition of */ +/* arbitrary interior pointers enabled, which is now the default. */ +GC_API void GC_CALL GC_register_displacement(size_t /* n */); + +/* The following version should be used if any debugging allocation is */ +/* being done. */ +GC_API void GC_CALL GC_debug_register_displacement(size_t /* n */); + +/* Explicitly trigger a full, world-stop collection. */ +GC_API void GC_CALL GC_gcollect(void); + +/* Same as above but ignores the default stop_func setting and tries to */ +/* unmap as much memory as possible (regardless of the corresponding */ +/* switch setting). The recommended usage: on receiving a system */ +/* low-memory event; before retrying a system call failed because of */ +/* the system is running out of resources. */ +GC_API void GC_CALL GC_gcollect_and_unmap(void); + +/* Trigger a full world-stopped collection. Abort the collection if */ +/* and when stop_func returns a nonzero value. Stop_func will be */ +/* called frequently, and should be reasonably fast. (stop_func is */ +/* called with the allocation lock held and the world might be stopped; */ +/* it's not allowed for stop_func to manipulate pointers to the garbage */ +/* collected heap or call most of GC functions.) This works even */ +/* if virtual dirty bits, and hence incremental collection is not */ +/* available for this architecture. Collections can be aborted faster */ +/* than normal pause times for incremental collection. However, */ +/* aborted collections do no useful work; the next collection needs */ +/* to start from the beginning. stop_func must not be 0. */ +/* GC_try_to_collect() returns 0 if the collection was aborted (or the */ +/* collections are disabled), 1 if it succeeded. */ +typedef int (GC_CALLBACK * GC_stop_func)(void); +GC_API int GC_CALL GC_try_to_collect(GC_stop_func /* stop_func */); + +/* Set and get the default stop_func. The default stop_func is used by */ +/* GC_gcollect() and by implicitly trigged collections (except for the */ +/* case when handling out of memory). Must not be 0. */ +/* Both the setter and getter acquire the GC lock to avoid data races. */ +GC_API void GC_CALL GC_set_stop_func(GC_stop_func /* stop_func */); +GC_API GC_stop_func GC_CALL GC_get_stop_func(void); + +/* Return the number of bytes in the heap. Excludes collector private */ +/* data structures. Excludes the unmapped memory (returned to the OS). */ +/* Includes empty blocks and fragmentation loss. Includes some pages */ +/* that were allocated but never written. */ +/* This is an unsynchronized getter, so it should be called typically */ +/* with the GC lock held to avoid data races on multiprocessors (the */ +/* alternative is to use GC_get_heap_usage_safe API call instead). */ +/* This getter remains lock-free (unsynchronized) for compatibility */ +/* reason since some existing clients call it from a GC callback */ +/* holding the allocator lock. (This API function and the following */ +/* four ones bellow were made thread-safe in GC v7.2alpha1 and */ +/* reverted back in v7.2alpha7 for the reason described.) */ +GC_API size_t GC_CALL GC_get_heap_size(void); + +/* Return a lower bound on the number of free bytes in the heap */ +/* (excluding the unmapped memory space). This is an unsynchronized */ +/* getter (see GC_get_heap_size comment regarding thread-safety). */ +GC_API size_t GC_CALL GC_get_free_bytes(void); + +/* Return the size (in bytes) of the unmapped memory (which is returned */ +/* to the OS but could be remapped back by the collector later unless */ +/* the OS runs out of system/virtual memory). This is an unsynchronized */ +/* getter (see GC_get_heap_size comment regarding thread-safety). */ +GC_API size_t GC_CALL GC_get_unmapped_bytes(void); + +/* Return the number of bytes allocated since the last collection. */ +/* This is an unsynchronized getter (see GC_get_heap_size comment */ +/* regarding thread-safety). */ +GC_API size_t GC_CALL GC_get_bytes_since_gc(void); + +/* Return the total number of bytes allocated in this process. */ +/* Never decreases, except due to wrapping. This is an unsynchronized */ +/* getter (see GC_get_heap_size comment regarding thread-safety). */ +GC_API size_t GC_CALL GC_get_total_bytes(void); + +/* Return the heap usage information. This is a thread-safe (atomic) */ +/* alternative for the five above getters. (This function acquires */ +/* the allocator lock thus preventing data racing and returning the */ +/* consistent result.) Passing NULL pointer is allowed for any */ +/* argument. Returned (filled in) values are of word type. */ +/* (This API function was introduced in GC v7.2alpha7 at the same time */ +/* when GC_get_heap_size and the friends were made lock-free again.) */ +GC_API void GC_CALL GC_get_heap_usage_safe(GC_word * /* pheap_size */, + GC_word * /* pfree_bytes */, + GC_word * /* punmapped_bytes */, + GC_word * /* pbytes_since_gc */, + GC_word * /* ptotal_bytes */); + +/* Disable garbage collection. Even GC_gcollect calls will be */ +/* ineffective. */ +GC_API void GC_CALL GC_disable(void); + +/* Return non-zero (TRUE) if and only if garbage collection is disabled */ +/* (i.e., GC_dont_gc value is non-zero). Does not acquire the lock. */ +GC_API int GC_CALL GC_is_disabled(void); + +/* Re-enable garbage collection. GC_disable() and GC_enable() calls */ +/* nest. Garbage collection is enabled if the number of calls to both */ +/* both functions is equal. */ +GC_API void GC_CALL GC_enable(void); + +/* Enable incremental/generational collection. Not advisable unless */ +/* dirty bits are available or most heap objects are pointer-free */ +/* (atomic) or immutable. Don't use in leak finding mode. Ignored if */ +/* GC_dont_gc is non-zero. Only the generational piece of this is */ +/* functional if GC_parallel is TRUE or if GC_time_limit is */ +/* GC_TIME_UNLIMITED. Causes thread-local variant of GC_gcj_malloc() */ +/* to revert to locked allocation. Must be called before any such */ +/* GC_gcj_malloc() calls. For best performance, should be called as */ +/* early as possible. On some platforms, calling it later may have */ +/* adverse effects. */ +/* Safe to call before GC_INIT(). Includes a GC_init() call. */ +GC_API void GC_CALL GC_enable_incremental(void); + +/* Does incremental mode write-protect pages? Returns zero or */ +/* more of the following, or'ed together: */ +#define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */ +#define GC_PROTECTS_PTRFREE_HEAP 2 +#define GC_PROTECTS_STATIC_DATA 4 /* Currently never. */ +#define GC_PROTECTS_STACK 8 /* Probably impractical. */ + +#define GC_PROTECTS_NONE 0 +GC_API int GC_CALL GC_incremental_protection_needs(void); + +/* Perform some garbage collection work, if appropriate. */ +/* Return 0 if there is no more work to be done. */ +/* Typically performs an amount of work corresponding roughly */ +/* to marking from one page. May do more work if further */ +/* progress requires it, e.g. if incremental collection is */ +/* disabled. It is reasonable to call this in a wait loop */ +/* until it returns 0. */ +GC_API int GC_CALL GC_collect_a_little(void); + +/* Allocate an object of size lb bytes. The client guarantees that */ +/* as long as the object is live, it will be referenced by a pointer */ +/* that points to somewhere within the first 256 bytes of the object. */ +/* (This should normally be declared volatile to prevent the compiler */ +/* from invalidating this assertion.) This routine is only useful */ +/* if a large array is being allocated. It reduces the chance of */ +/* accidentally retaining such an array as a result of scanning an */ +/* integer that happens to be an address inside the array. (Actually, */ +/* it reduces the chance of the allocator not finding space for such */ +/* an array, since it will try hard to avoid introducing such a false */ +/* reference.) On a SunOS 4.X or MS Windows system this is recommended */ +/* for arrays likely to be larger than 100K or so. For other systems, */ +/* or if the collector is not configured to recognize all interior */ +/* pointers, the threshold is normally much higher. */ +GC_API void * GC_CALL GC_malloc_ignore_off_page(size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); + +#ifdef GC_ADD_CALLER +# define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__ +# define GC_EXTRA_PARAMS GC_word ra, const char * s, int i +#else +# define GC_EXTRAS __FILE__, __LINE__ +# define GC_EXTRA_PARAMS const char * s, int i +#endif + +/* The following is only defined if the library has been suitably */ +/* compiled: */ +GC_API void * GC_CALL GC_malloc_atomic_uncollectable( + size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_atomic_uncollectable(size_t, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); + +/* Debugging (annotated) allocation. GC_gcollect will check */ +/* objects allocated in this way for overwrites, etc. */ +GC_API void * GC_CALL GC_debug_malloc(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_atomic(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API char * GC_CALL GC_debug_strdup(const char *, + GC_EXTRA_PARAMS) GC_ATTR_MALLOC; +GC_API char * GC_CALL GC_debug_strndup(const char *, size_t, + GC_EXTRA_PARAMS) GC_ATTR_MALLOC; +GC_API void * GC_CALL GC_debug_malloc_uncollectable( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_stubborn(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_ignore_off_page( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_atomic_ignore_off_page( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void GC_CALL GC_debug_free(void *); +GC_API void * GC_CALL GC_debug_realloc(void * /* old_object */, + size_t /* new_size_in_bytes */, GC_EXTRA_PARAMS) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); +GC_API void GC_CALL GC_debug_change_stubborn(void *); +GC_API void GC_CALL GC_debug_end_stubborn_change(void *); + +/* Routines that allocate objects with debug information (like the */ +/* above), but just fill in dummy file and line number information. */ +/* Thus they can serve as drop-in malloc/realloc replacements. This */ +/* can be useful for two reasons: */ +/* 1) It allows the collector to be built with DBG_HDRS_ALL defined */ +/* even if some allocation calls come from 3rd party libraries */ +/* that can't be recompiled. */ +/* 2) On some platforms, the file and line information is redundant, */ +/* since it can be reconstructed from a stack trace. On such */ +/* platforms it may be more convenient not to recompile, e.g. for */ +/* leak detection. This can be accomplished by instructing the */ +/* linker to replace malloc/realloc with these. */ +GC_API void * GC_CALL GC_debug_malloc_replacement(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_realloc_replacement(void * /* object_addr */, + size_t /* size_in_bytes */) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); + +#ifdef GC_DEBUG_REPLACEMENT +# define GC_MALLOC(sz) GC_debug_malloc_replacement(sz) +# define GC_REALLOC(old, sz) GC_debug_realloc_replacement(old, sz) +#elif defined(GC_DEBUG) +# define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS) +# define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS) +#else +# define GC_MALLOC(sz) GC_malloc(sz) +# define GC_REALLOC(old, sz) GC_realloc(old, sz) +#endif /* !GC_DEBUG_REPLACEMENT && !GC_DEBUG */ + +#ifdef GC_DEBUG +# define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS) +# define GC_STRDUP(s) GC_debug_strdup(s, GC_EXTRAS) +# define GC_STRNDUP(s, sz) GC_debug_strndup(s, sz, GC_EXTRAS) +# define GC_MALLOC_ATOMIC_UNCOLLECTABLE(sz) \ + GC_debug_malloc_atomic_uncollectable(sz, GC_EXTRAS) +# define GC_MALLOC_UNCOLLECTABLE(sz) \ + GC_debug_malloc_uncollectable(sz, GC_EXTRAS) +# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ + GC_debug_malloc_ignore_off_page(sz, GC_EXTRAS) +# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ + GC_debug_malloc_atomic_ignore_off_page(sz, GC_EXTRAS) +# define GC_FREE(p) GC_debug_free(p) +# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ + GC_debug_register_finalizer(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ + GC_debug_register_finalizer_ignore_self(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ + GC_debug_register_finalizer_no_order(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ + GC_debug_register_finalizer_unreachable(p, f, d, of, od) +# define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS) +# define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p) +# define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p) +# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ + GC_general_register_disappearing_link(link, GC_base(obj)) +# define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n) +#else +# define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz) +# define GC_STRDUP(s) GC_strdup(s) +# define GC_STRNDUP(s, sz) GC_strndup(s, sz) +# define GC_MALLOC_ATOMIC_UNCOLLECTABLE(sz) GC_malloc_atomic_uncollectable(sz) +# define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz) +# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ + GC_malloc_ignore_off_page(sz) +# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ + GC_malloc_atomic_ignore_off_page(sz) +# define GC_FREE(p) GC_free(p) +# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ + GC_register_finalizer(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ + GC_register_finalizer_ignore_self(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ + GC_register_finalizer_no_order(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ + GC_register_finalizer_unreachable(p, f, d, of, od) +# define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz) +# define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p) +# define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p) +# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ + GC_general_register_disappearing_link(link, obj) +# define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n) +#endif /* !GC_DEBUG */ + +/* The following are included because they are often convenient, and */ +/* reduce the chance for a misspecified size argument. But calls may */ +/* expand to something syntactically incorrect if t is a complicated */ +/* type expression. Note that, unlike C++ new operator, these ones */ +/* may return NULL (if out of memory). */ +#define GC_NEW(t) ((t*)GC_MALLOC(sizeof(t))) +#define GC_NEW_ATOMIC(t) ((t*)GC_MALLOC_ATOMIC(sizeof(t))) +#define GC_NEW_STUBBORN(t) ((t*)GC_MALLOC_STUBBORN(sizeof(t))) +#define GC_NEW_UNCOLLECTABLE(t) ((t*)GC_MALLOC_UNCOLLECTABLE(sizeof(t))) + +#ifdef GC_REQUIRE_WCSDUP + /* This might be unavailable on some targets (or not needed). */ + /* wchar_t should be defined in stddef.h */ + GC_API wchar_t * GC_CALL GC_wcsdup(const wchar_t *) GC_ATTR_MALLOC; + GC_API wchar_t * GC_CALL GC_debug_wcsdup(const wchar_t *, + GC_EXTRA_PARAMS) GC_ATTR_MALLOC; +# ifdef GC_DEBUG +# define GC_WCSDUP(s) GC_debug_wcsdup(s, GC_EXTRAS) +# else +# define GC_WCSDUP(s) GC_wcsdup(s) +# endif +#endif /* GC_REQUIRE_WCSDUP */ + +/* Finalization. Some of these primitives are grossly unsafe. */ +/* The idea is to make them both cheap, and sufficient to build */ +/* a safer layer, closer to Modula-3, Java, or PCedar finalization. */ +/* The interface represents my conclusions from a long discussion */ +/* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */ +/* Christian Jacobi, and Russ Atkinson. It's not perfect, and */ +/* probably nobody else agrees with it. Hans-J. Boehm 3/13/92 */ +typedef void (GC_CALLBACK * GC_finalization_proc)(void * /* obj */, + void * /* client_data */); + +GC_API void GC_CALL GC_register_finalizer(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + /* When obj is no longer accessible, invoke */ + /* (*fn)(obj, cd). If a and b are inaccessible, and */ + /* a points to b (after disappearing links have been */ + /* made to disappear), then only a will be */ + /* finalized. (If this does not create any new */ + /* pointers to b, then b will be finalized after the */ + /* next collection.) Any finalizable object that */ + /* is reachable from itself by following one or more */ + /* pointers will not be finalized (or collected). */ + /* Thus cycles involving finalizable objects should */ + /* be avoided, or broken by disappearing links. */ + /* All but the last finalizer registered for an object */ + /* is ignored. */ + /* Finalization may be removed by passing 0 as fn. */ + /* Finalizers are implicitly unregistered when they are */ + /* enqueued for finalization (i.e. become ready to be */ + /* finalized). */ + /* The old finalizer and client data are stored in */ + /* *ofn and *ocd. (ofn and/or ocd may be NULL. */ + /* The allocation lock is held while *ofn and *ocd are */ + /* updated. In case of error (no memory to register */ + /* new finalizer), *ofn and *ocd remain unchanged.) */ + /* Fn is never invoked on an accessible object, */ + /* provided hidden pointers are converted to real */ + /* pointers only if the allocation lock is held, and */ + /* such conversions are not performed by finalization */ + /* routines. */ + /* If GC_register_finalizer is aborted as a result of */ + /* a signal, the object may be left with no */ + /* finalization, even if neither the old nor new */ + /* finalizer were NULL. */ + /* Obj should be the starting address of an object */ + /* allocated by GC_malloc or friends. Obj may also be */ + /* NULL or point to something outside GC heap (in this */ + /* case, fn is ignored, *ofn and *ocd are set to NULL). */ + /* Note that any garbage collectable object referenced */ + /* by cd will be considered accessible until the */ + /* finalizer is invoked. */ + +/* Another versions of the above follow. It ignores */ +/* self-cycles, i.e. pointers from a finalizable object to */ +/* itself. There is a stylistic argument that this is wrong, */ +/* but it's unavoidable for C++, since the compiler may */ +/* silently introduce these. It's also benign in that specific */ +/* case. And it helps if finalizable objects are split to */ +/* avoid cycles. */ +/* Note that cd will still be viewed as accessible, even if it */ +/* refers to the object itself. */ +GC_API void GC_CALL GC_register_finalizer_ignore_self(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_ignore_self(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + +/* Another version of the above. It ignores all cycles. */ +/* It should probably only be used by Java implementations. */ +/* Note that cd will still be viewed as accessible, even if it */ +/* refers to the object itself. */ +GC_API void GC_CALL GC_register_finalizer_no_order(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_no_order(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + +/* This is a special finalizer that is useful when an object's */ +/* finalizer must be run when the object is known to be no */ +/* longer reachable, not even from other finalizable objects. */ +/* It behaves like "normal" finalization, except that the */ +/* finalizer is not run while the object is reachable from */ +/* other objects specifying unordered finalization. */ +/* Effectively it allows an object referenced, possibly */ +/* indirectly, from an unordered finalizable object to override */ +/* the unordered finalization request. */ +/* This can be used in combination with finalizer_no_order so */ +/* as to release resources that must not be released while an */ +/* object can still be brought back to life by other */ +/* finalizers. */ +/* Only works if GC_java_finalization is set. Probably only */ +/* of interest when implementing a language that requires */ +/* unordered finalization (e.g. Java, C#). */ +GC_API void GC_CALL GC_register_finalizer_unreachable(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_unreachable(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + +#define GC_NO_MEMORY 2 /* Failure due to lack of memory. */ + +/* The following routine may be used to break cycles between */ +/* finalizable objects, thus causing cyclic finalizable */ +/* objects to be finalized in the correct order. Standard */ +/* use involves calling GC_register_disappearing_link(&p), */ +/* where p is a pointer that is not followed by finalization */ +/* code, and should not be considered in determining */ +/* finalization order. */ +GC_API int GC_CALL GC_register_disappearing_link(void ** /* link */); + /* Link should point to a field of a heap allocated */ + /* object obj. *link will be cleared when obj is */ + /* found to be inaccessible. This happens BEFORE any */ + /* finalization code is invoked, and BEFORE any */ + /* decisions about finalization order are made. */ + /* This is useful in telling the finalizer that */ + /* some pointers are not essential for proper */ + /* finalization. This may avoid finalization cycles. */ + /* Note that obj may be resurrected by another */ + /* finalizer, and thus the clearing of *link may */ + /* be visible to non-finalization code. */ + /* There's an argument that an arbitrary action should */ + /* be allowed here, instead of just clearing a pointer. */ + /* But this causes problems if that action alters, or */ + /* examines connectivity. Returns GC_DUPLICATE if link */ + /* was already registered, GC_SUCCESS if registration */ + /* succeeded, GC_NO_MEMORY if it failed for lack of */ + /* memory, and GC_oom_fn did not handle the problem. */ + /* Only exists for backward compatibility. See below: */ + +GC_API int GC_CALL GC_general_register_disappearing_link(void ** /* link */, + void * /* obj */); + /* A slight generalization of the above. *link is */ + /* cleared when obj first becomes inaccessible. This */ + /* can be used to implement weak pointers easily and */ + /* safely. Typically link will point to a location */ + /* holding a disguised pointer to obj. (A pointer */ + /* inside an "atomic" object is effectively disguised.) */ + /* In this way, weak pointers are broken before any */ + /* object reachable from them gets finalized. */ + /* Each link may be registered only with one obj value, */ + /* i.e. all objects but the last one (link registered */ + /* with) are ignored. This was added after a long */ + /* email discussion with John Ellis. */ + /* link must be non-NULL (and be properly aligned). */ + /* obj must be a pointer to the first word of an object */ + /* allocated by GC_malloc or friends. It is unsafe to */ + /* explicitly deallocate the object containing link. */ + /* Explicit deallocation of obj may or may not cause */ + /* link to eventually be cleared. */ + /* This function can be used to implement certain types */ + /* of weak pointers. Note, however, this generally */ + /* requires that the allocation lock is held (see */ + /* GC_call_with_alloc_lock() below) when the disguised */ + /* pointer is accessed. Otherwise a strong pointer */ + /* could be recreated between the time the collector */ + /* decides to reclaim the object and the link is */ + /* cleared. Returns GC_SUCCESS if registration */ + /* succeeded (a new link is registered), GC_DUPLICATE */ + /* if link was already registered (with some object), */ + /* GC_NO_MEMORY if registration failed for lack of */ + /* memory (and GC_oom_fn did not handle the problem). */ + +GC_API int GC_CALL GC_unregister_disappearing_link(void ** /* link */); + /* Undoes a registration by either of the above two */ + /* routines. Returns 0 if link was not actually */ + /* registered (otherwise returns 1). */ + +/* Returns !=0 if GC_invoke_finalizers has something to do. */ +GC_API int GC_CALL GC_should_invoke_finalizers(void); + +GC_API int GC_CALL GC_invoke_finalizers(void); + /* Run finalizers for all objects that are ready to */ + /* be finalized. Return the number of finalizers */ + /* that were run. Normally this is also called */ + /* implicitly during some allocations. If */ + /* GC_finalize_on_demand is nonzero, it must be called */ + /* explicitly. */ + +/* Explicitly tell the collector that an object is reachable */ +/* at a particular program point. This prevents the argument */ +/* pointer from being optimized away, even it is otherwise no */ +/* longer needed. It should have no visible effect in the */ +/* absence of finalizers or disappearing links. But it may be */ +/* needed to prevent finalizers from running while the */ +/* associated external resource is still in use. */ +/* The function is sometimes called keep_alive in other */ +/* settings. */ +#if defined(__GNUC__) && !defined(__INTEL_COMPILER) +# define GC_reachable_here(ptr) \ + __asm__ __volatile__(" " : : "X"(ptr) : "memory") +#else + GC_API void GC_CALL GC_noop1(GC_word); +# define GC_reachable_here(ptr) GC_noop1((GC_word)(ptr)) +#endif + +/* GC_set_warn_proc can be used to redirect or filter warning messages. */ +/* p may not be a NULL pointer. Both the setter and the getter acquire */ +/* the GC lock (to avoid data races). */ +typedef void (GC_CALLBACK * GC_warn_proc)(char * /* msg */, + GC_word /* arg */); +GC_API void GC_CALL GC_set_warn_proc(GC_warn_proc /* p */); +/* GC_get_warn_proc returns the current warn_proc. */ +GC_API GC_warn_proc GC_CALL GC_get_warn_proc(void); + +/* GC_ignore_warn_proc may be used as an argument for GC_set_warn_proc */ +/* to suppress all warnings (unless statistics printing is turned on). */ +GC_API void GC_CALLBACK GC_ignore_warn_proc(char *, GC_word); + +/* The following is intended to be used by a higher level */ +/* (e.g. Java-like) finalization facility. It is expected */ +/* that finalization code will arrange for hidden pointers to */ +/* disappear. Otherwise objects can be accessed after they */ +/* have been collected. */ +/* Note that putting pointers in atomic objects or in */ +/* non-pointer slots of "typed" objects is equivalent to */ +/* disguising them in this way, and may have other advantages. */ +typedef GC_word GC_hidden_pointer; +#define GC_HIDE_POINTER(p) (~(GC_hidden_pointer)(p)) +/* Converting a hidden pointer to a real pointer requires verifying */ +/* that the object still exists. This involves acquiring the */ +/* allocator lock to avoid a race with the collector. */ +#define GC_REVEAL_POINTER(p) ((void *)GC_HIDE_POINTER(p)) + +#if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS) + /* This exists only for compatibility (the GC-prefixed symbols are */ + /* preferred for new code). */ +# define HIDE_POINTER(p) GC_HIDE_POINTER(p) +# define REVEAL_POINTER(p) GC_REVEAL_POINTER(p) +#endif + +typedef void * (GC_CALLBACK * GC_fn_type)(void * /* client_data */); +GC_API void * GC_CALL GC_call_with_alloc_lock(GC_fn_type /* fn */, + void * /* client_data */); + +/* These routines are intended to explicitly notify the collector */ +/* of new threads. Often this is unnecessary because thread creation */ +/* is implicitly intercepted by the collector, using header-file */ +/* defines, or linker-based interception. In the long run the intent */ +/* is to always make redundant registration safe. In the short run, */ +/* this is being implemented a platform at a time. */ +/* The interface is complicated by the fact that we probably will not */ +/* ever be able to automatically determine the stack base for thread */ +/* stacks on all platforms. */ + +/* Structure representing the base of a thread stack. On most */ +/* platforms this contains just a single address. */ +struct GC_stack_base { + void * mem_base; /* Base of memory stack. */ +# if defined(__ia64) || defined(__ia64__) || defined(_M_IA64) + void * reg_base; /* Base of separate register stack. */ +# endif +}; + +typedef void * (GC_CALLBACK * GC_stack_base_func)( + struct GC_stack_base * /* sb */, void * /* arg */); + +/* Call a function with a stack base structure corresponding to */ +/* somewhere in the GC_call_with_stack_base frame. This often can */ +/* be used to provide a sufficiently accurate stack base. And we */ +/* implement it everywhere. */ +GC_API void * GC_CALL GC_call_with_stack_base(GC_stack_base_func /* fn */, + void * /* arg */); + +#define GC_SUCCESS 0 +#define GC_DUPLICATE 1 /* Was already registered. */ +#define GC_NO_THREADS 2 /* No thread support in GC. */ + /* GC_NO_THREADS is not returned by any GC function anymore. */ +#define GC_UNIMPLEMENTED 3 /* Not yet implemented on this platform. */ + +#if defined(GC_DARWIN_THREADS) || defined(GC_WIN32_THREADS) + /* Use implicit thread registration and processing (via Win32 DllMain */ + /* or Darwin task_threads). Deprecated. Must be called before */ + /* GC_INIT() and other GC routines. Should be avoided if */ + /* GC_pthread_create, GC_beginthreadex (or GC_CreateThread) could be */ + /* called instead. Disables parallelized GC on Win32. */ + GC_API void GC_CALL GC_use_threads_discovery(void); +#endif + +#ifdef GC_THREADS + /* Return the signal number (constant) used by the garbage collector */ + /* to suspend threads on POSIX systems. Return -1 otherwise. */ + GC_API int GC_CALL GC_get_suspend_signal(void); + + /* Explicitly enable GC_register_my_thread() invocation. */ + /* Done implicitly if a GC thread-creation function is called (or */ + /* implicit thread registration is activated). Otherwise, it must */ + /* be called from the main (or any previously registered) thread */ + /* between the collector initialization and the first explicit */ + /* registering of a thread (it should be called as late as possible). */ + GC_API void GC_CALL GC_allow_register_threads(void); + + /* Register the current thread, with the indicated stack base, as */ + /* a new thread whose stack(s) should be traced by the GC. If it */ + /* is not implicitly called by the GC, this must be called before a */ + /* thread can allocate garbage collected memory, or assign pointers */ + /* to the garbage collected heap. Once registered, a thread will be */ + /* stopped during garbage collections. */ + /* This call must be previously enabled (see above). */ + /* This should never be called from the main thread, where it is */ + /* always done implicitly. This is normally done implicitly if GC_ */ + /* functions are called to create the thread, e.g. by including gc.h */ + /* (which redefines some system functions) before calling the system */ + /* thread creation function. Nonetheless, thread cleanup routines */ + /* (eg., pthread key destructor) typically require manual thread */ + /* registering (and unregistering) if pointers to GC-allocated */ + /* objects are manipulated inside. */ + /* It is also always done implicitly on some platforms if */ + /* GC_use_threads_discovery() is called at start-up. Except for the */ + /* latter case, the explicit call is normally required for threads */ + /* created by third-party libraries. */ + /* A manually registered thread requires manual unregistering. */ + GC_API int GC_CALL GC_register_my_thread(const struct GC_stack_base *); + + /* Unregister the current thread. Only an explicitly registered */ + /* thread (i.e. for which GC_register_my_thread() returns GC_SUCCESS) */ + /* is allowed (and required) to call this function. (As a special */ + /* exception, it is also allowed to once unregister the main thread.) */ + /* The thread may no longer allocate garbage collected memory or */ + /* manipulate pointers to the garbage collected heap after making */ + /* this call. Specifically, if it wants to return or otherwise */ + /* communicate a pointer to the garbage-collected heap to another */ + /* thread, it must do this before calling GC_unregister_my_thread, */ + /* most probably by saving it in a global data structure. Must not */ + /* be called inside a GC callback function (except for */ + /* GC_call_with_stack_base() one). */ + GC_API int GC_CALL GC_unregister_my_thread(void); +#endif /* GC_THREADS */ + +/* Wrapper for functions that are likely to block (or, at least, do not */ +/* allocate garbage collected memory and/or manipulate pointers to the */ +/* garbage collected heap) for an appreciable length of time. While fn */ +/* is running, the collector is said to be in the "inactive" state for */ +/* the current thread (this means that the thread is not suspended and */ +/* the thread's stack frames "belonging" to the functions in the */ +/* "inactive" state are not scanned during garbage collections). It is */ +/* allowed for fn to call GC_call_with_gc_active() (even recursively), */ +/* thus temporarily toggling the collector's state back to "active". */ +GC_API void * GC_CALL GC_do_blocking(GC_fn_type /* fn */, + void * /* client_data */); + +/* Call a function switching to the "active" state of the collector for */ +/* the current thread (i.e. the user function is allowed to call any */ +/* GC function and/or manipulate pointers to the garbage collected */ +/* heap). GC_call_with_gc_active() has the functionality opposite to */ +/* GC_do_blocking() one. It is assumed that the collector is already */ +/* initialized and the current thread is registered. fn may toggle */ +/* the collector thread's state temporarily to "inactive" one by using */ +/* GC_do_blocking. GC_call_with_gc_active() often can be used to */ +/* provide a sufficiently accurate stack base. */ +GC_API void * GC_CALL GC_call_with_gc_active(GC_fn_type /* fn */, + void * /* client_data */); + +/* Attempt to fill in the GC_stack_base structure with the stack base */ +/* for this thread. This appears to be required to implement anything */ +/* like the JNI AttachCurrentThread in an environment in which new */ +/* threads are not automatically registered with the collector. */ +/* It is also unfortunately hard to implement well on many platforms. */ +/* Returns GC_SUCCESS or GC_UNIMPLEMENTED. This function acquires the */ +/* GC lock on some platforms. */ +GC_API int GC_CALL GC_get_stack_base(struct GC_stack_base *); + +/* The following routines are primarily intended for use with a */ +/* preprocessor which inserts calls to check C pointer arithmetic. */ +/* They indicate failure by invoking the corresponding _print_proc. */ + +/* Check that p and q point to the same object. */ +/* Fail conspicuously if they don't. */ +/* Returns the first argument. */ +/* Succeeds if neither p nor q points to the heap. */ +/* May succeed if both p and q point to between heap objects. */ +GC_API void * GC_CALL GC_same_obj(void * /* p */, void * /* q */); + +/* Checked pointer pre- and post- increment operations. Note that */ +/* the second argument is in units of bytes, not multiples of the */ +/* object size. This should either be invoked from a macro, or the */ +/* call should be automatically generated. */ +GC_API void * GC_CALL GC_pre_incr(void **, ptrdiff_t /* how_much */); +GC_API void * GC_CALL GC_post_incr(void **, ptrdiff_t /* how_much */); + +/* Check that p is visible */ +/* to the collector as a possibly pointer containing location. */ +/* If it isn't fail conspicuously. */ +/* Returns the argument in all cases. May erroneously succeed */ +/* in hard cases. (This is intended for debugging use with */ +/* untyped allocations. The idea is that it should be possible, though */ +/* slow, to add such a call to all indirect pointer stores.) */ +/* Currently useless for multi-threaded worlds. */ +GC_API void * GC_CALL GC_is_visible(void * /* p */); + +/* Check that if p is a pointer to a heap page, then it points to */ +/* a valid displacement within a heap object. */ +/* Fail conspicuously if this property does not hold. */ +/* Uninteresting with GC_all_interior_pointers. */ +/* Always returns its argument. */ +GC_API void * GC_CALL GC_is_valid_displacement(void * /* p */); + +/* Explicitly dump the GC state. This is most often called from the */ +/* debugger, or by setting the GC_DUMP_REGULARLY environment variable, */ +/* but it may be useful to call it from client code during debugging. */ +/* Defined only if the library has been compiled without NO_DEBUGGING. */ +GC_API void GC_CALL GC_dump(void); + +/* Safer, but slow, pointer addition. Probably useful mainly with */ +/* a preprocessor. Useful only for heap pointers. */ +/* Only the macros without trailing digits are meant to be used */ +/* by clients. These are designed to model the available C pointer */ +/* arithmetic expressions. */ +/* Even then, these are probably more useful as */ +/* documentation than as part of the API. */ +/* Note that GC_PTR_ADD evaluates the first argument more than once. */ +#if defined(GC_DEBUG) && defined(__GNUC__) +# define GC_PTR_ADD3(x, n, type_of_result) \ + ((type_of_result)GC_same_obj((x)+(n), (x))) +# define GC_PRE_INCR3(x, n, type_of_result) \ + ((type_of_result)GC_pre_incr((void **)(&(x)), (n)*sizeof(*x))) +# define GC_POST_INCR3(x, n, type_of_result) \ + ((type_of_result)GC_post_incr((void **)(&(x)), (n)*sizeof(*x))) +# define GC_PTR_ADD(x, n) GC_PTR_ADD3(x, n, typeof(x)) +# define GC_PRE_INCR(x, n) GC_PRE_INCR3(x, n, typeof(x)) +# define GC_POST_INCR(x) GC_POST_INCR3(x, 1, typeof(x)) +# define GC_POST_DECR(x) GC_POST_INCR3(x, -1, typeof(x)) +#else /* !GC_DEBUG || !__GNUC__ */ + /* We can't do this right without typeof, which ANSI decided was not */ + /* sufficiently useful. Without it we resort to the non-debug version. */ + /* FIXME: This should eventually support C++0x decltype. */ +# define GC_PTR_ADD(x, n) ((x)+(n)) +# define GC_PRE_INCR(x, n) ((x) += (n)) +# define GC_POST_INCR(x) ((x)++) +# define GC_POST_DECR(x) ((x)--) +#endif /* !GC_DEBUG || !__GNUC__ */ + +/* Safer assignment of a pointer to a non-stack location. */ +#ifdef GC_DEBUG +# define GC_PTR_STORE(p, q) \ + (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q)) +#else +# define GC_PTR_STORE(p, q) (*(p) = (q)) +#endif + +/* Functions called to report pointer checking errors */ +GC_API void (GC_CALLBACK * GC_same_obj_print_proc)(void * /* p */, + void * /* q */); +GC_API void (GC_CALLBACK * GC_is_valid_displacement_print_proc)(void *); +GC_API void (GC_CALLBACK * GC_is_visible_print_proc)(void *); + +#ifdef GC_PTHREADS + /* For pthread support, we generally need to intercept a number of */ + /* thread library calls. We do that here by macro defining them. */ +# include "gc_pthread_redirects.h" +#endif + +/* This returns a list of objects, linked through their first word. */ +/* Its use can greatly reduce lock contention problems, since the */ +/* allocation lock can be acquired and released many fewer times. */ +GC_API void * GC_CALL GC_malloc_many(size_t /* lb */); +#define GC_NEXT(p) (*(void * *)(p)) /* Retrieve the next element */ + /* in returned list. */ + +/* A filter function to control the scanning of dynamic libraries. */ +/* If implemented, called by GC before registering a dynamic library */ +/* (discovered by GC) section as a static data root (called only as */ +/* a last reason not to register). The filename of the library, the */ +/* address and the length of the memory region (section) are passed. */ +/* This routine should return nonzero if that region should be scanned. */ +/* Always called with the allocation lock held. Depending on the */ +/* platform, might be called with the "world" stopped. */ +typedef int (GC_CALLBACK * GC_has_static_roots_func)( + const char * /* dlpi_name */, + void * /* section_start */, + size_t /* section_size */); + +/* Register a new callback (a user-supplied filter) to control the */ +/* scanning of dynamic libraries. Replaces any previously registered */ +/* callback. May be 0 (means no filtering). May be unused on some */ +/* platforms (if the filtering is unimplemented or inappropriate). */ +GC_API void GC_CALL GC_register_has_static_roots_callback( + GC_has_static_roots_func); + +#if defined(GC_WIN32_THREADS) && !defined(GC_PTHREADS) + +# ifndef GC_NO_THREAD_DECLS + +# ifdef __cplusplus + } /* Including windows.h in an extern "C" context no longer works. */ +# endif + +# if !defined(_WIN32_WCE) && !defined(__CEGCC__) +# include /* For _beginthreadex, _endthreadex */ +# endif + +# include + +# ifdef __cplusplus + extern "C" { +# endif + +# ifdef GC_UNDERSCORE_STDCALL + /* Explicitly prefix exported/imported WINAPI (__stdcall) symbols */ + /* with '_' (underscore). Might be useful if MinGW/x86 is used. */ +# define GC_CreateThread _GC_CreateThread +# define GC_ExitThread _GC_ExitThread +# endif + + /* All threads must be created using GC_CreateThread or */ + /* GC_beginthreadex, or must explicitly call GC_register_my_thread */ + /* (and call GC_unregister_my_thread before thread termination), so */ + /* that they will be recorded in the thread table. For backward */ + /* compatibility, it is possible to build the GC with GC_DLL */ + /* defined, and to call GC_use_threads_discovery. This implicitly */ + /* registers all created threads, but appears to be less robust. */ + /* Currently the collector expects all threads to fall through and */ + /* terminate normally, or call GC_endthreadex() or GC_ExitThread, */ + /* so that the thread is properly unregistered. */ + GC_API HANDLE WINAPI GC_CreateThread( + LPSECURITY_ATTRIBUTES /* lpThreadAttributes */, + DWORD /* dwStackSize */, + LPTHREAD_START_ROUTINE /* lpStartAddress */, + LPVOID /* lpParameter */, DWORD /* dwCreationFlags */, + LPDWORD /* lpThreadId */); + +# ifndef DECLSPEC_NORETURN + /* Typically defined in winnt.h. */ +# define DECLSPEC_NORETURN /* empty */ +# endif + + GC_API DECLSPEC_NORETURN void WINAPI GC_ExitThread( + DWORD /* dwExitCode */); + +# if !defined(_WIN32_WCE) && !defined(__CEGCC__) +# if !defined(_UINTPTR_T) && !defined(_UINTPTR_T_DEFINED) \ + && !defined(UINTPTR_MAX) + typedef GC_word GC_uintptr_t; +# else + typedef uintptr_t GC_uintptr_t; +# endif + + GC_API GC_uintptr_t GC_CALL GC_beginthreadex( + void * /* security */, unsigned /* stack_size */, + unsigned (__stdcall *)(void *), + void * /* arglist */, unsigned /* initflag */, + unsigned * /* thrdaddr */); + + /* Note: _endthreadex() is not currently marked as no-return in */ + /* VC++ and MinGW headers, so we don't mark it neither. */ + GC_API void GC_CALL GC_endthreadex(unsigned /* retval */); +# endif /* !_WIN32_WCE */ + +# endif /* !GC_NO_THREAD_DECLS */ + +# ifdef GC_WINMAIN_REDIRECT + /* win32_threads.c implements the real WinMain(), which will start */ + /* a new thread to call GC_WinMain() after initializing the garbage */ + /* collector. */ +# define WinMain GC_WinMain +# endif + + /* For compatibility only. */ +# define GC_use_DllMain GC_use_threads_discovery + +# ifndef GC_NO_THREAD_REDIRECTS +# define CreateThread GC_CreateThread +# define ExitThread GC_ExitThread +# undef _beginthreadex +# define _beginthreadex GC_beginthreadex +# undef _endthreadex +# define _endthreadex GC_endthreadex +/* #define _beginthread { > "Please use _beginthreadex instead of _beginthread" < } */ +# endif /* !GC_NO_THREAD_REDIRECTS */ + +#endif /* GC_WIN32_THREADS */ + +/* Public setter and getter for switching "unmap as much as possible" */ +/* mode on(1) and off(0). Has no effect unless unmapping is turned on. */ +/* Has no effect on implicitly-initiated garbage collections. Initial */ +/* value is controlled by GC_FORCE_UNMAP_ON_GCOLLECT. The setter and */ +/* getter are unsynchronized. */ +GC_API void GC_CALL GC_set_force_unmap_on_gcollect(int); +GC_API int GC_CALL GC_get_force_unmap_on_gcollect(void); + +/* Fully portable code should call GC_INIT() from the main program */ +/* before making any other GC_ calls. On most platforms this is a */ +/* no-op and the collector self-initializes. But a number of */ +/* platforms make that too hard. */ +/* A GC_INIT call is required if the collector is built with */ +/* THREAD_LOCAL_ALLOC defined and the initial allocation call is not */ +/* to GC_malloc() or GC_malloc_atomic(). */ + +#ifdef __CYGWIN32__ + /* Similarly gnu-win32 DLLs need explicit initialization from the */ + /* main program, as does AIX. */ + extern int _data_start__[], _data_end__[], _bss_start__[], _bss_end__[]; +# define GC_DATASTART (_data_start__ < _bss_start__ ? \ + (void *)_data_start__ : (void *)_bss_start__) +# define GC_DATAEND (_data_end__ > _bss_end__ ? \ + (void *)_data_end__ : (void *)_bss_end__) +# define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND); \ + GC_gcollect() /* For blacklisting. */ + /* Required at least if GC is in a DLL. And doesn't hurt. */ +#elif defined(_AIX) + extern int _data[], _end[]; +# define GC_DATASTART ((void *)((ulong)_data)) +# define GC_DATAEND ((void *)((ulong)_end)) +# define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND) +#else +# define GC_INIT_CONF_ROOTS /* empty */ +#endif + +#ifdef GC_DONT_EXPAND + /* Set GC_dont_expand to TRUE at start-up */ +# define GC_INIT_CONF_DONT_EXPAND GC_set_dont_expand(1) +#else +# define GC_INIT_CONF_DONT_EXPAND /* empty */ +#endif + +#ifdef GC_FORCE_UNMAP_ON_GCOLLECT + /* Turn on "unmap as much as possible on explicit GC" mode at start-up */ +# define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT \ + GC_set_force_unmap_on_gcollect(1) +#else +# define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT /* empty */ +#endif + +#ifdef GC_MAX_RETRIES + /* Set GC_max_retries to the desired value at start-up */ +# define GC_INIT_CONF_MAX_RETRIES GC_set_max_retries(GC_MAX_RETRIES) +#else +# define GC_INIT_CONF_MAX_RETRIES /* empty */ +#endif + +#ifdef GC_FREE_SPACE_DIVISOR + /* Set GC_free_space_divisor to the desired value at start-up */ +# define GC_INIT_CONF_FREE_SPACE_DIVISOR \ + GC_set_free_space_divisor(GC_FREE_SPACE_DIVISOR) +#else +# define GC_INIT_CONF_FREE_SPACE_DIVISOR /* empty */ +#endif + +#ifdef GC_FULL_FREQ + /* Set GC_full_freq to the desired value at start-up */ +# define GC_INIT_CONF_FULL_FREQ GC_set_full_freq(GC_FULL_FREQ) +#else +# define GC_INIT_CONF_FULL_FREQ /* empty */ +#endif + +#ifdef GC_TIME_LIMIT + /* Set GC_time_limit to the desired value at start-up */ +# define GC_INIT_CONF_TIME_LIMIT GC_set_time_limit(GC_TIME_LIMIT) +#else +# define GC_INIT_CONF_TIME_LIMIT /* empty */ +#endif + +#ifdef GC_MAXIMUM_HEAP_SIZE + /* Limit the heap size to the desired value (useful for debugging). */ + /* The limit could be overridden either at the program start-up by */ + /* the similar environment variable or anytime later by the */ + /* corresponding API function call. */ +# define GC_INIT_CONF_MAXIMUM_HEAP_SIZE \ + GC_set_max_heap_size(GC_MAXIMUM_HEAP_SIZE) +#else +# define GC_INIT_CONF_MAXIMUM_HEAP_SIZE /* empty */ +#endif + +#ifdef GC_IGNORE_WARN + /* Turn off all warnings at start-up (after GC initialization) */ +# define GC_INIT_CONF_IGNORE_WARN GC_set_warn_proc(GC_ignore_warn_proc) +#else +# define GC_INIT_CONF_IGNORE_WARN /* empty */ +#endif + +#ifdef GC_INITIAL_HEAP_SIZE + /* Set heap size to the desired value at start-up */ +# define GC_INIT_CONF_INITIAL_HEAP_SIZE \ + { size_t heap_size = GC_get_heap_size(); \ + if (heap_size < (GC_INITIAL_HEAP_SIZE)) \ + (void)GC_expand_hp((GC_INITIAL_HEAP_SIZE) - heap_size); } +#else +# define GC_INIT_CONF_INITIAL_HEAP_SIZE /* empty */ +#endif + +/* Portable clients should call this at the program start-up. More */ +/* over, some platforms require this call to be done strictly from the */ +/* primordial thread. */ +#define GC_INIT() { GC_INIT_CONF_DONT_EXPAND; /* pre-init */ \ + GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT; \ + GC_INIT_CONF_MAX_RETRIES; \ + GC_INIT_CONF_FREE_SPACE_DIVISOR; \ + GC_INIT_CONF_FULL_FREQ; \ + GC_INIT_CONF_TIME_LIMIT; \ + GC_INIT_CONF_MAXIMUM_HEAP_SIZE; \ + GC_init(); /* real GC initialization */ \ + GC_INIT_CONF_ROOTS; /* post-init */ \ + GC_INIT_CONF_IGNORE_WARN; \ + GC_INIT_CONF_INITIAL_HEAP_SIZE; } + +/* win32S may not free all resources on process exit. */ +/* This explicitly deallocates the heap. */ +GC_API void GC_CALL GC_win32_free_heap(void); + +#if defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB) + /* Allocation really goes through GC_amiga_allocwrapper_do */ +# include "gc_amiga_redirects.h" +#endif + +#ifdef __cplusplus + } /* end of extern "C" */ +#endif + +#endif /* GC_H */