gc-7.2/libatomic_ops/doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 VPATH = @srcdir@
  19 pkgdatadir = $(datadir)/@PACKAGE@
  20 pkgincludedir = $(includedir)/@PACKAGE@
  21 pkglibdir = $(libdir)/@PACKAGE@
  22 pkglibexecdir = $(libexecdir)/@PACKAGE@
  23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  24 install_sh_DATA = $(install_sh) -c -m 644
  25 install_sh_PROGRAM = $(install_sh) -c
  26 install_sh_SCRIPT = $(install_sh) -c
  27 INSTALL_HEADER = $(INSTALL_DATA)
  28 transform = $(program_transform_name)
  29 NORMAL_INSTALL = :
  30 PRE_INSTALL = :
  31 POST_INSTALL = :
  32 NORMAL_UNINSTALL = :
  33 PRE_UNINSTALL = :
  34 POST_UNINSTALL = :
  35 build_triplet = @build@
  36 host_triplet = @host@
  37 target_triplet = @target@
  38 subdir = doc
  39 DIST_COMMON = $(dist_pkgdata_DATA) $(srcdir)/Makefile.am \
  40         $(srcdir)/Makefile.in COPYING
  41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  42 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  43 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  44         $(ACLOCAL_M4)
  45 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
  46 CONFIG_HEADER = $(top_builddir)/src/config.h
  47 CONFIG_CLEAN_FILES =
  48 CONFIG_CLEAN_VPATH_FILES =
  49 SOURCES =
  50 DIST_SOURCES =
  51 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  52 am__vpath_adj = case $$p in \
  53     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  54     *) f=$$p;; \
  55   esac;
  56 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  57 am__install_max = 40
  58 am__nobase_strip_setup = \
  59   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  60 am__nobase_strip = \
  61   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  62 am__nobase_list = $(am__nobase_strip_setup); \
  63   for p in $$list; do echo "$$p $$p"; done | \
  64   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  65   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  66     if (++n[$$2] == $(am__install_max)) \
  67       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  68     END { for (dir in files) print dir, files[dir] }'
  69 am__base_list = \
  70   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  71   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  72 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
  73 DATA = $(dist_pkgdata_DATA)
  74 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  75 ACLOCAL = @ACLOCAL@
  76 AMTAR = @AMTAR@
  77 AUTOCONF = @AUTOCONF@
  78 AUTOHEADER = @AUTOHEADER@
  79 AUTOMAKE = @AUTOMAKE@
  80 AWK = @AWK@
  81 CC = @CC@
  82 CCAS = @CCAS@
  83 CCASDEPMODE = @CCASDEPMODE@
  84 CCASFLAGS = @CCASFLAGS@
  85 CCDEPMODE = @CCDEPMODE@
  86 CFLAGS = @CFLAGS@
  87 CPP = @CPP@
  88 CPPFLAGS = @CPPFLAGS@
  89 CYGPATH_W = @CYGPATH_W@
  90 DEFS = @DEFS@
  91 DEPDIR = @DEPDIR@
  92 ECHO_C = @ECHO_C@
  93 ECHO_N = @ECHO_N@
  94 ECHO_T = @ECHO_T@
  95 EGREP = @EGREP@
  96 EXEEXT = @EXEEXT@
  97 GREP = @GREP@
  98 INSTALL = @INSTALL@
  99 INSTALL_DATA = @INSTALL_DATA@
 100 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 101 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 102 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 103 LDFLAGS = @LDFLAGS@
 104 LIBOBJS = @LIBOBJS@
 105 LIBS = @LIBS@
 106 LTLIBOBJS = @LTLIBOBJS@
 107 MAKEINFO = @MAKEINFO@
 108 MKDIR_P = @MKDIR_P@
 109 OBJEXT = @OBJEXT@
 110 PACKAGE = @PACKAGE@
 111 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 112 PACKAGE_NAME = @PACKAGE_NAME@
 113 PACKAGE_STRING = @PACKAGE_STRING@
 114 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 115 PACKAGE_URL = @PACKAGE_URL@
 116 PACKAGE_VERSION = @PACKAGE_VERSION@
 117 PATH_SEPARATOR = @PATH_SEPARATOR@
 118 PICFLAG = @PICFLAG@
 119 RANLIB = @RANLIB@
 120 SET_MAKE = @SET_MAKE@
 121 SHELL = @SHELL@
 122 STRIP = @STRIP@
 123 THREADDLLIBS = @THREADDLLIBS@
 124 VERSION = @VERSION@
 125 abs_builddir = @abs_builddir@
 126 abs_srcdir = @abs_srcdir@
 127 abs_top_builddir = @abs_top_builddir@
 128 abs_top_srcdir = @abs_top_srcdir@
 129 ac_ct_CC = @ac_ct_CC@
 130 am__include = @am__include@
 131 am__leading_dot = @am__leading_dot@
 132 am__quote = @am__quote@
 133 am__tar = @am__tar@
 134 am__untar = @am__untar@
 135 bindir = @bindir@
 136 build = @build@
 137 build_alias = @build_alias@
 138 build_cpu = @build_cpu@
 139 build_os = @build_os@
 140 build_vendor = @build_vendor@
 141 builddir = @builddir@
 142 datadir = @datadir@
 143 datarootdir = @datarootdir@
 144 docdir = @docdir@
 145 dvidir = @dvidir@
 146 exec_prefix = @exec_prefix@
 147 host = @host@
 148 host_alias = @host_alias@
 149 host_cpu = @host_cpu@
 150 host_os = @host_os@
 151 host_vendor = @host_vendor@
 152 htmldir = @htmldir@
 153 includedir = @includedir@
 154 infodir = @infodir@
 155 install_sh = @install_sh@
 156 libdir = @libdir@
 157 libexecdir = @libexecdir@
 158 localedir = @localedir@
 159 localstatedir = @localstatedir@
 160 mandir = @mandir@
 161 mkdir_p = @mkdir_p@
 162 oldincludedir = @oldincludedir@
 163 pdfdir = @pdfdir@
 164 prefix = @prefix@
 165 program_transform_name = @program_transform_name@
 166 psdir = @psdir@
 167 sbindir = @sbindir@
 168 sharedstatedir = @sharedstatedir@
 169 srcdir = @srcdir@
 170 sysconfdir = @sysconfdir@
 171 target = @target@
 172 target_alias = @target_alias@
 173 target_cpu = @target_cpu@
 174 target_os = @target_os@
 175 target_vendor = @target_vendor@
 176 top_build_prefix = @top_build_prefix@
 177 top_builddir = @top_builddir@
 178 top_srcdir = @top_srcdir@
 179
 180 # installed documentation
 181 #
 182 dist_pkgdata_DATA = COPYING LICENSING.txt README.txt README_stack.txt README_malloc.txt README_win32.txt
 183 all: all-am
 184
 185 .SUFFIXES:
 186 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 187         @for dep in $?; do \
 188           case '$(am__configure_deps)' in \
 189             *$$dep*) \
 190               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 191                 && { if test -f $@; then exit 0; else break; fi; }; \
 192               exit 1;; \
 193           esac; \
 194         done; \
 195         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 196         $(am__cd) $(top_srcdir) && \
 197           $(AUTOMAKE) --gnu doc/Makefile
 198 .PRECIOUS: Makefile
 199 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 200         @case '$?' in \
 201           *config.status*) \
 202             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 203           *) \
 204             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 205             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 206         esac;
 207
 208 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 209         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 210
 211 $(top_srcdir)/configure:  $(am__configure_deps)
 212         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 213 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 214         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 215 $(am__aclocal_m4_deps):
 216 install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
 217         @$(NORMAL_INSTALL)
 218         test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
 219         @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
 220         for p in $$list; do \
 221           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 222           echo "$$d$$p"; \
 223         done | $(am__base_list) | \
 224         while read files; do \
 225           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
 226           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
 227         done
 228
 229 uninstall-dist_pkgdataDATA:
 230         @$(NORMAL_UNINSTALL)
 231         @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
 232         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 233         test -n "$$files" || exit 0; \
 234         echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
 235         cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
 236 tags: TAGS
 237 TAGS:
 238
 239 ctags: CTAGS
 240 CTAGS:
 241
 242
 243 distdir: $(DISTFILES)
 244         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 245         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 246         list='$(DISTFILES)'; \
 247           dist_files=`for file in $$list; do echo $$file; done | \
 248           sed -e "s|^$$srcdirstrip/||;t" \
 249               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 250         case $$dist_files in \
 251           */*) $(MKDIR_P) `echo "$$dist_files" | \
 252                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 253                            sort -u` ;; \
 254         esac; \
 255         for file in $$dist_files; do \
 256           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 257           if test -d $$d/$$file; then \
 258             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 259             if test -d "$(distdir)/$$file"; then \
 260               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 261             fi; \
 262             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 263               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 264               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 265             fi; \
 266             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 267           else \
 268             test -f "$(distdir)/$$file" \
 269             || cp -p $$d/$$file "$(distdir)/$$file" \
 270             || exit 1; \
 271           fi; \
 272         done
 273 check-am: all-am
 274 check: check-am
 275 all-am: Makefile $(DATA)
 276 installdirs:
 277         for dir in "$(DESTDIR)$(pkgdatadir)"; do \
 278           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 279         done
 280 install: install-am
 281 install-exec: install-exec-am
 282 install-data: install-data-am
 283 uninstall: uninstall-am
 284
 285 install-am: all-am
 286         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 287
 288 installcheck: installcheck-am
 289 install-strip:
 290         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 291           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 292           `test -z '$(STRIP)' || \
 293             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 294 mostlyclean-generic:
 295
 296 clean-generic:
 297
 298 distclean-generic:
 299         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 300         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 301
 302 maintainer-clean-generic:
 303         @echo "This command is intended for maintainers to use"
 304         @echo "it deletes files that may require special tools to rebuild."
 305 clean: clean-am
 306
 307 clean-am: clean-generic mostlyclean-am
 308
 309 distclean: distclean-am
 310         -rm -f Makefile
 311 distclean-am: clean-am distclean-generic
 312
 313 dvi: dvi-am
 314
 315 dvi-am:
 316
 317 html: html-am
 318
 319 html-am:
 320
 321 info: info-am
 322
 323 info-am:
 324
 325 install-data-am: install-dist_pkgdataDATA
 326
 327 install-dvi: install-dvi-am
 328
 329 install-dvi-am:
 330
 331 install-exec-am:
 332
 333 install-html: install-html-am
 334
 335 install-html-am:
 336
 337 install-info: install-info-am
 338
 339 install-info-am:
 340
 341 install-man:
 342
 343 install-pdf: install-pdf-am
 344
 345 install-pdf-am:
 346
 347 install-ps: install-ps-am
 348
 349 install-ps-am:
 350
 351 installcheck-am:
 352
 353 maintainer-clean: maintainer-clean-am
 354         -rm -f Makefile
 355 maintainer-clean-am: distclean-am maintainer-clean-generic
 356
 357 mostlyclean: mostlyclean-am
 358
 359 mostlyclean-am: mostlyclean-generic
 360
 361 pdf: pdf-am
 362
 363 pdf-am:
 364
 365 ps: ps-am
 366
 367 ps-am:
 368
 369 uninstall-am: uninstall-dist_pkgdataDATA
 370
 371 .MAKE: install-am install-strip
 372
 373 .PHONY: all all-am check check-am clean clean-generic distclean \
 374         distclean-generic distdir dvi dvi-am html html-am info info-am \
 375         install install-am install-data install-data-am \
 376         install-dist_pkgdataDATA install-dvi install-dvi-am \
 377         install-exec install-exec-am install-html install-html-am \
 378         install-info install-info-am install-man install-pdf \
 379         install-pdf-am install-ps install-ps-am install-strip \
 380         installcheck installcheck-am installdirs maintainer-clean \
 381         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 382         pdf-am ps ps-am uninstall uninstall-am \
 383         uninstall-dist_pkgdataDATA
 384
 385
 386 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 387 # Otherwise a system limit (for SysV at least) may be exceeded.
 388 .NOEXPORT: