2 * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
3 * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
4 * Copyright 1996-1999 by Silicon Graphics. All rights reserved.
5 * Copyright 1999 by Hewlett-Packard Company. All rights reserved.
6 * Copyright (C) 2007 Free Software Foundation, Inc
7 * Copyright (c) 2000-2011 by Hewlett-Packard Development Company.
9 * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
10 * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
12 * Permission is hereby granted to use or copy this program
13 * for any purpose, provided the above notices are retained on all copies.
14 * Permission to modify the code and to distribute modified code is granted,
15 * provided the above notices are retained, and a notice that the code was
16 * modified is included with the above copyright notice.
20 * Note that this defines a large number of tuning hooks, which can
21 * safely be ignored in nearly all cases. For normal use it suffices
22 * to call only GC_MALLOC and perhaps GC_REALLOC.
23 * For better performance, also look at GC_MALLOC_ATOMIC, and
24 * GC_enable_incremental. If you need an action to be performed
25 * immediately before an object is collected, look at GC_register_finalizer.
26 * If you are using Solaris threads, look at the end of this file.
27 * Everything else is best ignored unless you encounter performance
34 #include "gc_version.h"
35 /* Define version numbers here to allow test on build machine */
36 /* for cross-builds. Note that this defines the header */
37 /* version number, which may or may not match that of the */
38 /* dynamic library. GC_get_version() can be used to obtain */
41 #include "gc_config_macros.h"
47 typedef void * GC_PTR; /* preserved only for backward compatibility */
49 /* Define word and signed_word to be unsigned and signed types of the */
50 /* size as char * or void *. There seems to be no way to do this */
51 /* even semi-portably. The following is probably no better/worse */
52 /* than almost anything else. */
53 /* The ANSI standard suggests that size_t and ptrdiff_t might be */
54 /* better choices. But those had incorrect definitions on some older */
55 /* systems. Notably "typedef int size_t" is WRONG. */
58 typedef unsigned __int64 GC_word;
59 typedef __int64 GC_signed_word;
61 typedef unsigned long long GC_word;
62 typedef long long GC_signed_word;
65 typedef unsigned long GC_word;
66 typedef long GC_signed_word;
69 /* Get the GC library version. The returned value is a constant in the */
70 /* form: ((version_major<<16) | (version_minor<<8) | alpha_version). */
71 GC_API unsigned GC_CALL GC_get_version(void);
73 /* Public read-only variables */
74 /* The supplied getter functions are preferred for new code. */
76 GC_API GC_word GC_gc_no;/* Counter incremented per collection. */
77 /* Includes empty GCs at startup. */
78 GC_API GC_word GC_CALL GC_get_gc_no(void);
79 /* GC_get_gc_no() is unsynchronized, so */
80 /* it requires GC_call_with_alloc_lock() to */
81 /* avoid data races on multiprocessors. */
84 GC_API int GC_parallel;
85 /* GC is parallelized for performance on */
86 /* multiprocessors. Currently set only */
87 /* implicitly if collector is built with */
88 /* PARALLEL_MARK defined and if either: */
89 /* Env variable GC_NPROC is set to > 1, or */
90 /* GC_NPROC is not set and this is an MP. */
91 /* If GC_parallel is set, incremental */
92 /* collection is only partially functional, */
93 /* and may not be desirable. This getter does */
94 /* not use or need synchronization (i.e. */
95 /* acquiring the GC lock). */
96 GC_API int GC_CALL GC_get_parallel(void);
100 /* Public R/W variables */
101 /* The supplied setter and getter functions are preferred for new code. */
103 typedef void * (GC_CALLBACK * GC_oom_func)(size_t /* bytes_requested */);
104 GC_API GC_oom_func GC_oom_fn;
105 /* When there is insufficient memory to satisfy */
106 /* an allocation request, we return */
107 /* (*GC_oom_fn)(size). By default this just */
109 /* If it returns, it must return 0 or a valid */
110 /* pointer to a previously allocated heap */
111 /* object. GC_oom_fn must not be 0. */
112 /* Both the supplied setter and the getter */
113 /* acquire the GC lock (to avoid data races). */
114 GC_API void GC_CALL GC_set_oom_fn(GC_oom_func);
115 GC_API GC_oom_func GC_CALL GC_get_oom_fn(void);
117 GC_API int GC_find_leak;
118 /* Do not actually garbage collect, but simply */
119 /* report inaccessible memory that was not */
120 /* deallocated with GC_free. Initial value */
121 /* is determined by FIND_LEAK macro. */
122 /* The value should not typically be modified */
123 /* after GC initialization (and, thus, it does */
124 /* not use or need synchronization). */
125 GC_API void GC_CALL GC_set_find_leak(int);
126 GC_API int GC_CALL GC_get_find_leak(void);
128 GC_API int GC_all_interior_pointers;
129 /* Arrange for pointers to object interiors to */
130 /* be recognized as valid. Typically should */
131 /* not be changed after GC initialization (in */
132 /* case of calling it after the GC is */
133 /* initialized, the setter acquires the GC lock */
134 /* (to avoid data races). The initial value */
135 /* depends on whether the GC is built with */
136 /* ALL_INTERIOR_POINTERS macro defined or not. */
137 /* Unless DONT_ADD_BYTE_AT_END is defined, this */
138 /* also affects whether sizes are increased by */
139 /* at least a byte to allow "off the end" */
140 /* pointer recognition. Must be only 0 or 1. */
141 GC_API void GC_CALL GC_set_all_interior_pointers(int);
142 GC_API int GC_CALL GC_get_all_interior_pointers(void);
144 GC_API int GC_finalize_on_demand;
145 /* If nonzero, finalizers will only be run in */
146 /* response to an explicit GC_invoke_finalizers */
147 /* call. The default is determined by whether */
148 /* the FINALIZE_ON_DEMAND macro is defined */
149 /* when the collector is built. */
150 /* The setter and getter are unsynchronized. */
151 GC_API void GC_CALL GC_set_finalize_on_demand(int);
152 GC_API int GC_CALL GC_get_finalize_on_demand(void);
154 GC_API int GC_java_finalization;
155 /* Mark objects reachable from finalizable */
156 /* objects in a separate post-pass. This makes */
157 /* it a bit safer to use non-topologically- */
158 /* ordered finalization. Default value is */
159 /* determined by JAVA_FINALIZATION macro. */
160 /* Enables register_finalizer_unreachable to */
161 /* work correctly. */
162 /* The setter and getter are unsynchronized. */
163 GC_API void GC_CALL GC_set_java_finalization(int);
164 GC_API int GC_CALL GC_get_java_finalization(void);
166 typedef void (GC_CALLBACK * GC_finalizer_notifier_proc)(void);
167 GC_API GC_finalizer_notifier_proc GC_finalizer_notifier;
168 /* Invoked by the collector when there are */
169 /* objects to be finalized. Invoked at most */
170 /* once per GC cycle. Never invoked unless */
171 /* GC_finalize_on_demand is set. */
172 /* Typically this will notify a finalization */
173 /* thread, which will call GC_invoke_finalizers */
174 /* in response. May be 0 (means no notifier). */
175 /* Both the supplied setter and the getter */
176 /* acquire the GC lock (to avoid data races). */
177 GC_API void GC_CALL GC_set_finalizer_notifier(GC_finalizer_notifier_proc);
178 GC_API GC_finalizer_notifier_proc GC_CALL GC_get_finalizer_notifier(void);
180 GC_API int GC_dont_gc; /* != 0 ==> Don't collect. In versions 6.2a1+, */
181 /* this overrides explicit GC_gcollect() calls. */
182 /* Used as a counter, so that nested enabling */
183 /* and disabling work correctly. Should */
184 /* normally be updated with GC_enable() and */
185 /* GC_disable() calls. Direct assignment to */
186 /* GC_dont_gc is deprecated. To check whether */
187 /* GC is disabled, GC_is_disabled() is */
188 /* preferred for new code. */
190 GC_API int GC_dont_expand;
191 /* Don't expand the heap unless explicitly */
192 /* requested or forced to. The setter and */
193 /* getter are unsynchronized. */
194 GC_API void GC_CALL GC_set_dont_expand(int);
195 GC_API int GC_CALL GC_get_dont_expand(void);
197 GC_API int GC_use_entire_heap;
198 /* Causes the non-incremental collector to use the */
199 /* entire heap before collecting. This was the only */
200 /* option for GC versions < 5.0. This sometimes */
201 /* results in more large block fragmentation, since */
202 /* very large blocks will tend to get broken up */
203 /* during each GC cycle. It is likely to result in a */
204 /* larger working set, but lower collection */
205 /* frequencies, and hence fewer instructions executed */
206 /* in the collector. */
208 GC_API int GC_full_freq; /* Number of partial collections between */
209 /* full collections. Matters only if */
210 /* GC_incremental is set. */
211 /* Full collections are also triggered if */
212 /* the collector detects a substantial */
213 /* increase in the number of in-use heap */
214 /* blocks. Values in the tens are now */
215 /* perfectly reasonable, unlike for */
216 /* earlier GC versions. */
217 /* The setter and getter are unsynchronized, so */
218 /* GC_call_with_alloc_lock() is required to */
219 /* avoid data races (if the value is modified */
220 /* after the GC is put to multi-threaded mode). */
221 GC_API void GC_CALL GC_set_full_freq(int);
222 GC_API int GC_CALL GC_get_full_freq(void);
224 GC_API GC_word GC_non_gc_bytes;
225 /* Bytes not considered candidates for */
226 /* collection. Used only to control scheduling */
227 /* of collections. Updated by */
228 /* GC_malloc_uncollectable and GC_free. */
230 /* The setter and getter are unsynchronized, so */
231 /* GC_call_with_alloc_lock() is required to */
232 /* avoid data races (if the value is modified */
233 /* after the GC is put to multi-threaded mode). */
234 GC_API void GC_CALL GC_set_non_gc_bytes(GC_word);
235 GC_API GC_word GC_CALL GC_get_non_gc_bytes(void);
237 GC_API int GC_no_dls;
238 /* Don't register dynamic library data segments. */
239 /* Wizards only. Should be used only if the */
240 /* application explicitly registers all roots. */
241 /* (In some environments like Microsoft Windows */
242 /* and Apple's Darwin, this may also prevent */
243 /* registration of the main data segment as part */
244 /* of the root set.) */
245 /* The setter and getter are unsynchronized. */
246 GC_API void GC_CALL GC_set_no_dls(int);
247 GC_API int GC_CALL GC_get_no_dls(void);
249 GC_API GC_word GC_free_space_divisor;
250 /* We try to make sure that we allocate at */
251 /* least N/GC_free_space_divisor bytes between */
252 /* collections, where N is twice the number */
253 /* of traced bytes, plus the number of untraced */
254 /* bytes (bytes in "atomic" objects), plus */
255 /* a rough estimate of the root set size. */
256 /* N approximates GC tracing work per GC. */
257 /* Initially, GC_free_space_divisor = 3. */
258 /* Increasing its value will use less space */
259 /* but more collection time. Decreasing it */
260 /* will appreciably decrease collection time */
261 /* at the expense of space. */
262 /* The setter and getter are unsynchronized, so */
263 /* GC_call_with_alloc_lock() is required to */
264 /* avoid data races (if the value is modified */
265 /* after the GC is put to multi-threaded mode). */
266 GC_API void GC_CALL GC_set_free_space_divisor(GC_word);
267 GC_API GC_word GC_CALL GC_get_free_space_divisor(void);
269 GC_API GC_word GC_max_retries;
270 /* The maximum number of GCs attempted before */
271 /* reporting out of memory after heap */
272 /* expansion fails. Initially 0. */
273 /* The setter and getter are unsynchronized, so */
274 /* GC_call_with_alloc_lock() is required to */
275 /* avoid data races (if the value is modified */
276 /* after the GC is put to multi-threaded mode). */
277 GC_API void GC_CALL GC_set_max_retries(GC_word);
278 GC_API GC_word GC_CALL GC_get_max_retries(void);
281 GC_API char *GC_stackbottom; /* Cool end of user stack. */
282 /* May be set in the client prior to */
283 /* calling any GC_ routines. This */
284 /* avoids some overhead, and */
285 /* potentially some signals that can */
286 /* confuse debuggers. Otherwise the */
287 /* collector attempts to set it */
289 /* For multi-threaded code, this is the */
290 /* cold end of the stack for the */
291 /* primordial thread. Portable clients */
292 /* should use GC_get_stack_base(), */
293 /* GC_call_with_gc_active() and */
294 /* GC_register_my_thread() instead. */
296 GC_API int GC_dont_precollect; /* Don't collect as part of GC */
297 /* initialization. Should be set only */
298 /* if the client wants a chance to */
299 /* manually initialize the root set */
300 /* before the first collection. */
301 /* Interferes with blacklisting. */
302 /* Wizards only. The setter and getter */
303 /* are unsynchronized (and no external */
304 /* locking is needed since the value is */
305 /* accessed at GC initialization only). */
306 GC_API void GC_CALL GC_set_dont_precollect(int);
307 GC_API int GC_CALL GC_get_dont_precollect(void);
309 GC_API unsigned long GC_time_limit;
310 /* If incremental collection is enabled, */
311 /* We try to terminate collections */
312 /* after this many milliseconds. Not a */
313 /* hard time bound. Setting this to */
314 /* GC_TIME_UNLIMITED will essentially */
315 /* disable incremental collection while */
316 /* leaving generational collection */
318 #define GC_TIME_UNLIMITED 999999
319 /* Setting GC_time_limit to this value */
320 /* will disable the "pause time exceeded"*/
322 /* The setter and getter are unsynchronized, so */
323 /* GC_call_with_alloc_lock() is required to */
324 /* avoid data races (if the value is modified */
325 /* after the GC is put to multi-threaded mode). */
326 GC_API void GC_CALL GC_set_time_limit(unsigned long);
327 GC_API unsigned long GC_CALL GC_get_time_limit(void);
329 /* Public procedures */
331 /* Set whether the GC will allocate executable memory pages or not. */
332 /* A non-zero argument instructs the collector to allocate memory with */
333 /* the executable flag on. Must be called before the collector is */
334 /* initialized. May have no effect on some platforms. The default */
335 /* value is controlled by NO_EXECUTE_PERMISSION macro (if present then */
336 /* the flag is off). Portable clients should have */
337 /* GC_set_pages_executable(1) call (before GC_INIT) provided they are */
338 /* going to execute code on any of the GC-allocated memory objects. */
339 GC_API void GC_CALL GC_set_pages_executable(int);
341 /* Returns non-zero value if the GC is set to the allocate-executable */
342 /* mode. The mode could be changed by GC_set_pages_executable (before */
343 /* GC_INIT) unless the former has no effect on the platform. Does not */
344 /* use or need synchronization (i.e. acquiring the allocator lock). */
345 GC_API int GC_CALL GC_get_pages_executable(void);
347 /* Overrides the default handle-fork mode. Non-zero value means GC */
348 /* should install proper pthread_atfork handlers. Has effect only if */
349 /* called before GC_INIT. Clients should invoke GC_set_handle_fork(1) */
350 /* only if going to use fork with GC functions called in the forked */
351 /* child. (Note that such client and atfork handlers activities are */
352 /* not fully POSIX-compliant.) */
353 GC_API void GC_CALL GC_set_handle_fork(int);
355 /* Initialize the collector. Portable clients should call GC_INIT() */
356 /* from the main program instead. */
357 GC_API void GC_CALL GC_init(void);
359 /* General purpose allocation routines, with roughly malloc calling */
360 /* conv. The atomic versions promise that no relevant pointers are */
361 /* contained in the object. The non-atomic versions guarantee that the */
362 /* new object is cleared. GC_malloc_stubborn promises that no changes */
363 /* to the object will occur after GC_end_stubborn_change has been */
364 /* called on the result of GC_malloc_stubborn. GC_malloc_uncollectable */
365 /* allocates an object that is scanned for pointers to collectable */
366 /* objects, but is not itself collectable. The object is scanned even */
367 /* if it does not appear to be reachable. GC_malloc_uncollectable and */
368 /* GC_free called on the resulting object implicitly update */
369 /* GC_non_gc_bytes appropriately. */
370 /* Note that the GC_malloc_stubborn support doesn't really exist */
371 /* anymore. MANUAL_VDB provides comparable functionality. */
372 GC_API void * GC_CALL GC_malloc(size_t /* size_in_bytes */)
373 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
374 GC_API void * GC_CALL GC_malloc_atomic(size_t /* size_in_bytes */)
375 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
376 GC_API char * GC_CALL GC_strdup(const char *) GC_ATTR_MALLOC;
377 GC_API char * GC_CALL GC_strndup(const char *, size_t) GC_ATTR_MALLOC;
378 GC_API void * GC_CALL GC_malloc_uncollectable(size_t /* size_in_bytes */)
379 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
380 GC_API void * GC_CALL GC_malloc_stubborn(size_t /* size_in_bytes */)
381 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
383 /* GC_memalign() is not well tested. */
384 GC_API void * GC_CALL GC_memalign(size_t /* align */, size_t /* lb */)
385 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(2);
386 GC_API int GC_CALL GC_posix_memalign(void ** /* memptr */, size_t /* align */,
389 /* Explicitly deallocate an object. Dangerous if used incorrectly. */
390 /* Requires a pointer to the base of an object. */
391 /* If the argument is stubborn, it should not be changeable when freed. */
392 /* An object should not be enabled for finalization when it is */
393 /* explicitly deallocated. */
394 /* GC_free(0) is a no-op, as required by ANSI C for free. */
395 GC_API void GC_CALL GC_free(void *);
397 /* Stubborn objects may be changed only if the collector is explicitly */
398 /* informed. The collector is implicitly informed of coming change */
399 /* when such an object is first allocated. The following routines */
400 /* inform the collector that an object will no longer be changed, or */
401 /* that it will once again be changed. Only non-NULL pointer stores */
402 /* into the object are considered to be changes. The argument to */
403 /* GC_end_stubborn_change must be exactly the value returned by */
404 /* GC_malloc_stubborn or passed to GC_change_stubborn. (In the second */
405 /* case, it may be an interior pointer within 512 bytes of the */
406 /* beginning of the objects.) There is a performance penalty for */
407 /* allowing more than one stubborn object to be changed at once, but it */
408 /* is acceptable to do so. The same applies to dropping stubborn */
409 /* objects that are still changeable. */
410 GC_API void GC_CALL GC_change_stubborn(void *);
411 GC_API void GC_CALL GC_end_stubborn_change(void *);
413 /* Return a pointer to the base (lowest address) of an object given */
414 /* a pointer to a location within the object. */
415 /* I.e., map an interior pointer to the corresponding base pointer. */
416 /* Note that with debugging allocation, this returns a pointer to the */
417 /* actual base of the object, i.e. the debug information, not to */
418 /* the base of the user object. */
419 /* Return 0 if displaced_pointer doesn't point to within a valid */
421 /* Note that a deallocated object in the garbage collected heap */
422 /* may be considered valid, even if it has been deallocated with */
424 GC_API void * GC_CALL GC_base(void * /* displaced_pointer */);
426 /* Given a pointer to the base of an object, return its size in bytes. */
427 /* The returned size may be slightly larger than what was originally */
429 GC_API size_t GC_CALL GC_size(const void * /* object_addr */);
431 /* For compatibility with C library. This is occasionally faster than */
432 /* a malloc followed by a bcopy. But if you rely on that, either here */
433 /* or with the standard C library, your code is broken. In my */
434 /* opinion, it shouldn't have been invented, but now we're stuck. -HB */
435 /* The resulting object has the same kind as the original. */
436 /* If the argument is stubborn, the result will have changes enabled. */
437 /* It is an error to have changes enabled for the original object. */
438 /* Follows ANSI conventions for NULL old_object. */
439 GC_API void * GC_CALL GC_realloc(void * /* old_object */,
440 size_t /* new_size_in_bytes */)
441 /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2);
443 /* Explicitly increase the heap size. */
444 /* Returns 0 on failure, 1 on success. */
445 GC_API int GC_CALL GC_expand_hp(size_t /* number_of_bytes */);
447 /* Limit the heap size to n bytes. Useful when you're debugging, */
448 /* especially on systems that don't handle running out of memory well. */
449 /* n == 0 ==> unbounded. This is the default. This setter function is */
450 /* unsynchronized (so it might require GC_call_with_alloc_lock to avoid */
452 GC_API void GC_CALL GC_set_max_heap_size(GC_word /* n */);
454 /* Inform the collector that a certain section of statically allocated */
455 /* memory contains no pointers to garbage collected memory. Thus it */
456 /* need not be scanned. This is sometimes important if the application */
457 /* maps large read/write files into the address space, which could be */
458 /* mistaken for dynamic library data segments on some systems. */
459 /* The section (referred to by low_address) must be pointer-aligned. */
460 /* low_address must not be greater than high_address_plus_1. */
461 GC_API void GC_CALL GC_exclude_static_roots(void * /* low_address */,
462 void * /* high_address_plus_1 */);
464 /* Clear the set of root segments. Wizards only. */
465 GC_API void GC_CALL GC_clear_roots(void);
467 /* Add a root segment. Wizards only. */
468 /* Both segment start and end are not needed to be pointer-aligned. */
469 /* low_address must not be greater than high_address_plus_1. */
470 GC_API void GC_CALL GC_add_roots(void * /* low_address */,
471 void * /* high_address_plus_1 */);
473 /* Remove a root segment. Wizards only. */
474 /* May be unimplemented on some platforms. */
475 GC_API void GC_CALL GC_remove_roots(void * /* low_address */,
476 void * /* high_address_plus_1 */);
478 /* Add a displacement to the set of those considered valid by the */
479 /* collector. GC_register_displacement(n) means that if p was returned */
480 /* by GC_malloc, then (char *)p + n will be considered to be a valid */
481 /* pointer to p. N must be small and less than the size of p. */
482 /* (All pointers to the interior of objects from the stack are */
483 /* considered valid in any case. This applies to heap objects and */
485 /* Preferably, this should be called before any other GC procedures. */
486 /* Calling it later adds to the probability of excess memory */
488 /* This is a no-op if the collector has recognition of */
489 /* arbitrary interior pointers enabled, which is now the default. */
490 GC_API void GC_CALL GC_register_displacement(size_t /* n */);
492 /* The following version should be used if any debugging allocation is */
494 GC_API void GC_CALL GC_debug_register_displacement(size_t /* n */);
496 /* Explicitly trigger a full, world-stop collection. */
497 GC_API void GC_CALL GC_gcollect(void);
499 /* Same as above but ignores the default stop_func setting and tries to */
500 /* unmap as much memory as possible (regardless of the corresponding */
501 /* switch setting). The recommended usage: on receiving a system */
502 /* low-memory event; before retrying a system call failed because of */
503 /* the system is running out of resources. */
504 GC_API void GC_CALL GC_gcollect_and_unmap(void);
506 /* Trigger a full world-stopped collection. Abort the collection if */
507 /* and when stop_func returns a nonzero value. Stop_func will be */
508 /* called frequently, and should be reasonably fast. (stop_func is */
509 /* called with the allocation lock held and the world might be stopped; */
510 /* it's not allowed for stop_func to manipulate pointers to the garbage */
511 /* collected heap or call most of GC functions.) This works even */
512 /* if virtual dirty bits, and hence incremental collection is not */
513 /* available for this architecture. Collections can be aborted faster */
514 /* than normal pause times for incremental collection. However, */
515 /* aborted collections do no useful work; the next collection needs */
516 /* to start from the beginning. stop_func must not be 0. */
517 /* GC_try_to_collect() returns 0 if the collection was aborted (or the */
518 /* collections are disabled), 1 if it succeeded. */
519 typedef int (GC_CALLBACK * GC_stop_func)(void);
520 GC_API int GC_CALL GC_try_to_collect(GC_stop_func /* stop_func */);
522 /* Set and get the default stop_func. The default stop_func is used by */
523 /* GC_gcollect() and by implicitly trigged collections (except for the */
524 /* case when handling out of memory). Must not be 0. */
525 /* Both the setter and getter acquire the GC lock to avoid data races. */
526 GC_API void GC_CALL GC_set_stop_func(GC_stop_func /* stop_func */);
527 GC_API GC_stop_func GC_CALL GC_get_stop_func(void);
529 /* Return the number of bytes in the heap. Excludes collector private */
530 /* data structures. Excludes the unmapped memory (returned to the OS). */
531 /* Includes empty blocks and fragmentation loss. Includes some pages */
532 /* that were allocated but never written. */
533 /* This is an unsynchronized getter, so it should be called typically */
534 /* with the GC lock held to avoid data races on multiprocessors (the */
535 /* alternative is to use GC_get_heap_usage_safe API call instead). */
536 /* This getter remains lock-free (unsynchronized) for compatibility */
537 /* reason since some existing clients call it from a GC callback */
538 /* holding the allocator lock. (This API function and the following */
539 /* four ones bellow were made thread-safe in GC v7.2alpha1 and */
540 /* reverted back in v7.2alpha7 for the reason described.) */
541 GC_API size_t GC_CALL GC_get_heap_size(void);
543 /* Return a lower bound on the number of free bytes in the heap */
544 /* (excluding the unmapped memory space). This is an unsynchronized */
545 /* getter (see GC_get_heap_size comment regarding thread-safety). */
546 GC_API size_t GC_CALL GC_get_free_bytes(void);
548 /* Return the size (in bytes) of the unmapped memory (which is returned */
549 /* to the OS but could be remapped back by the collector later unless */
550 /* the OS runs out of system/virtual memory). This is an unsynchronized */
551 /* getter (see GC_get_heap_size comment regarding thread-safety). */
552 GC_API size_t GC_CALL GC_get_unmapped_bytes(void);
554 /* Return the number of bytes allocated since the last collection. */
555 /* This is an unsynchronized getter (see GC_get_heap_size comment */
556 /* regarding thread-safety). */
557 GC_API size_t GC_CALL GC_get_bytes_since_gc(void);
559 /* Return the total number of bytes allocated in this process. */
560 /* Never decreases, except due to wrapping. This is an unsynchronized */
561 /* getter (see GC_get_heap_size comment regarding thread-safety). */
562 GC_API size_t GC_CALL GC_get_total_bytes(void);
564 /* Return the heap usage information. This is a thread-safe (atomic) */
565 /* alternative for the five above getters. (This function acquires */
566 /* the allocator lock thus preventing data racing and returning the */
567 /* consistent result.) Passing NULL pointer is allowed for any */
568 /* argument. Returned (filled in) values are of word type. */
569 /* (This API function was introduced in GC v7.2alpha7 at the same time */
570 /* when GC_get_heap_size and the friends were made lock-free again.) */
571 GC_API void GC_CALL GC_get_heap_usage_safe(GC_word * /* pheap_size */,
572 GC_word * /* pfree_bytes */,
573 GC_word * /* punmapped_bytes */,
574 GC_word * /* pbytes_since_gc */,
575 GC_word * /* ptotal_bytes */);
577 /* Disable garbage collection. Even GC_gcollect calls will be */
579 GC_API void GC_CALL GC_disable(void);
581 /* Return non-zero (TRUE) if and only if garbage collection is disabled */
582 /* (i.e., GC_dont_gc value is non-zero). Does not acquire the lock. */
583 GC_API int GC_CALL GC_is_disabled(void);
585 /* Re-enable garbage collection. GC_disable() and GC_enable() calls */
586 /* nest. Garbage collection is enabled if the number of calls to both */
587 /* both functions is equal. */
588 GC_API void GC_CALL GC_enable(void);
590 /* Enable incremental/generational collection. Not advisable unless */
591 /* dirty bits are available or most heap objects are pointer-free */
592 /* (atomic) or immutable. Don't use in leak finding mode. Ignored if */
593 /* GC_dont_gc is non-zero. Only the generational piece of this is */
594 /* functional if GC_parallel is TRUE or if GC_time_limit is */
595 /* GC_TIME_UNLIMITED. Causes thread-local variant of GC_gcj_malloc() */
596 /* to revert to locked allocation. Must be called before any such */
597 /* GC_gcj_malloc() calls. For best performance, should be called as */
598 /* early as possible. On some platforms, calling it later may have */
599 /* adverse effects. */
600 /* Safe to call before GC_INIT(). Includes a GC_init() call. */
601 GC_API void GC_CALL GC_enable_incremental(void);
603 /* Does incremental mode write-protect pages? Returns zero or */
604 /* more of the following, or'ed together: */
605 #define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */
606 #define GC_PROTECTS_PTRFREE_HEAP 2
607 #define GC_PROTECTS_STATIC_DATA 4 /* Currently never. */
608 #define GC_PROTECTS_STACK 8 /* Probably impractical. */
610 #define GC_PROTECTS_NONE 0
611 GC_API int GC_CALL GC_incremental_protection_needs(void);
613 /* Perform some garbage collection work, if appropriate. */
614 /* Return 0 if there is no more work to be done. */
615 /* Typically performs an amount of work corresponding roughly */
616 /* to marking from one page. May do more work if further */
617 /* progress requires it, e.g. if incremental collection is */
618 /* disabled. It is reasonable to call this in a wait loop */
619 /* until it returns 0. */
620 GC_API int GC_CALL GC_collect_a_little(void);
622 /* Allocate an object of size lb bytes. The client guarantees that */
623 /* as long as the object is live, it will be referenced by a pointer */
624 /* that points to somewhere within the first 256 bytes of the object. */
625 /* (This should normally be declared volatile to prevent the compiler */
626 /* from invalidating this assertion.) This routine is only useful */
627 /* if a large array is being allocated. It reduces the chance of */
628 /* accidentally retaining such an array as a result of scanning an */
629 /* integer that happens to be an address inside the array. (Actually, */
630 /* it reduces the chance of the allocator not finding space for such */
631 /* an array, since it will try hard to avoid introducing such a false */
632 /* reference.) On a SunOS 4.X or MS Windows system this is recommended */
633 /* for arrays likely to be larger than 100K or so. For other systems, */
634 /* or if the collector is not configured to recognize all interior */
635 /* pointers, the threshold is normally much higher. */
636 GC_API void * GC_CALL GC_malloc_ignore_off_page(size_t /* lb */)
637 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
638 GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t /* lb */)
639 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
642 # define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__
643 # define GC_EXTRA_PARAMS GC_word ra, const char * s, int i
645 # define GC_EXTRAS __FILE__, __LINE__
646 # define GC_EXTRA_PARAMS const char * s, int i
649 /* The following is only defined if the library has been suitably */
651 GC_API void * GC_CALL GC_malloc_atomic_uncollectable(
652 size_t /* size_in_bytes */)
653 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
654 GC_API void * GC_CALL GC_debug_malloc_atomic_uncollectable(size_t,
656 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
658 /* Debugging (annotated) allocation. GC_gcollect will check */
659 /* objects allocated in this way for overwrites, etc. */
660 GC_API void * GC_CALL GC_debug_malloc(size_t /* size_in_bytes */,
662 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
663 GC_API void * GC_CALL GC_debug_malloc_atomic(size_t /* size_in_bytes */,
665 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
666 GC_API char * GC_CALL GC_debug_strdup(const char *,
667 GC_EXTRA_PARAMS) GC_ATTR_MALLOC;
668 GC_API char * GC_CALL GC_debug_strndup(const char *, size_t,
669 GC_EXTRA_PARAMS) GC_ATTR_MALLOC;
670 GC_API void * GC_CALL GC_debug_malloc_uncollectable(
671 size_t /* size_in_bytes */, GC_EXTRA_PARAMS)
672 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
673 GC_API void * GC_CALL GC_debug_malloc_stubborn(size_t /* size_in_bytes */,
675 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
676 GC_API void * GC_CALL GC_debug_malloc_ignore_off_page(
677 size_t /* size_in_bytes */, GC_EXTRA_PARAMS)
678 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
679 GC_API void * GC_CALL GC_debug_malloc_atomic_ignore_off_page(
680 size_t /* size_in_bytes */, GC_EXTRA_PARAMS)
681 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
682 GC_API void GC_CALL GC_debug_free(void *);
683 GC_API void * GC_CALL GC_debug_realloc(void * /* old_object */,
684 size_t /* new_size_in_bytes */, GC_EXTRA_PARAMS)
685 /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2);
686 GC_API void GC_CALL GC_debug_change_stubborn(void *);
687 GC_API void GC_CALL GC_debug_end_stubborn_change(void *);
689 /* Routines that allocate objects with debug information (like the */
690 /* above), but just fill in dummy file and line number information. */
691 /* Thus they can serve as drop-in malloc/realloc replacements. This */
692 /* can be useful for two reasons: */
693 /* 1) It allows the collector to be built with DBG_HDRS_ALL defined */
694 /* even if some allocation calls come from 3rd party libraries */
695 /* that can't be recompiled. */
696 /* 2) On some platforms, the file and line information is redundant, */
697 /* since it can be reconstructed from a stack trace. On such */
698 /* platforms it may be more convenient not to recompile, e.g. for */
699 /* leak detection. This can be accomplished by instructing the */
700 /* linker to replace malloc/realloc with these. */
701 GC_API void * GC_CALL GC_debug_malloc_replacement(size_t /* size_in_bytes */)
702 GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1);
703 GC_API void * GC_CALL GC_debug_realloc_replacement(void * /* object_addr */,
704 size_t /* size_in_bytes */)
705 /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2);
707 #ifdef GC_DEBUG_REPLACEMENT
708 # define GC_MALLOC(sz) GC_debug_malloc_replacement(sz)
709 # define GC_REALLOC(old, sz) GC_debug_realloc_replacement(old, sz)
710 #elif defined(GC_DEBUG)
711 # define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS)
712 # define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS)
714 # define GC_MALLOC(sz) GC_malloc(sz)
715 # define GC_REALLOC(old, sz) GC_realloc(old, sz)
716 #endif /* !GC_DEBUG_REPLACEMENT && !GC_DEBUG */
719 # define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS)
720 # define GC_STRDUP(s) GC_debug_strdup(s, GC_EXTRAS)
721 # define GC_STRNDUP(s, sz) GC_debug_strndup(s, sz, GC_EXTRAS)
722 # define GC_MALLOC_ATOMIC_UNCOLLECTABLE(sz) \
723 GC_debug_malloc_atomic_uncollectable(sz, GC_EXTRAS)
724 # define GC_MALLOC_UNCOLLECTABLE(sz) \
725 GC_debug_malloc_uncollectable(sz, GC_EXTRAS)
726 # define GC_MALLOC_IGNORE_OFF_PAGE(sz) \
727 GC_debug_malloc_ignore_off_page(sz, GC_EXTRAS)
728 # define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \
729 GC_debug_malloc_atomic_ignore_off_page(sz, GC_EXTRAS)
730 # define GC_FREE(p) GC_debug_free(p)
731 # define GC_REGISTER_FINALIZER(p, f, d, of, od) \
732 GC_debug_register_finalizer(p, f, d, of, od)
733 # define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
734 GC_debug_register_finalizer_ignore_self(p, f, d, of, od)
735 # define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
736 GC_debug_register_finalizer_no_order(p, f, d, of, od)
737 # define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \
738 GC_debug_register_finalizer_unreachable(p, f, d, of, od)
739 # define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS)
740 # define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p)
741 # define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p)
742 # define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
743 GC_general_register_disappearing_link(link, GC_base(obj))
744 # define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n)
746 # define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz)
747 # define GC_STRDUP(s) GC_strdup(s)
748 # define GC_STRNDUP(s, sz) GC_strndup(s, sz)
749 # define GC_MALLOC_ATOMIC_UNCOLLECTABLE(sz) GC_malloc_atomic_uncollectable(sz)
750 # define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz)
751 # define GC_MALLOC_IGNORE_OFF_PAGE(sz) \
752 GC_malloc_ignore_off_page(sz)
753 # define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \
754 GC_malloc_atomic_ignore_off_page(sz)
755 # define GC_FREE(p) GC_free(p)
756 # define GC_REGISTER_FINALIZER(p, f, d, of, od) \
757 GC_register_finalizer(p, f, d, of, od)
758 # define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
759 GC_register_finalizer_ignore_self(p, f, d, of, od)
760 # define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
761 GC_register_finalizer_no_order(p, f, d, of, od)
762 # define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \
763 GC_register_finalizer_unreachable(p, f, d, of, od)
764 # define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz)
765 # define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p)
766 # define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p)
767 # define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
768 GC_general_register_disappearing_link(link, obj)
769 # define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n)
770 #endif /* !GC_DEBUG */
772 /* The following are included because they are often convenient, and */
773 /* reduce the chance for a misspecified size argument. But calls may */
774 /* expand to something syntactically incorrect if t is a complicated */
775 /* type expression. Note that, unlike C++ new operator, these ones */
776 /* may return NULL (if out of memory). */
777 #define GC_NEW(t) ((t*)GC_MALLOC(sizeof(t)))
778 #define GC_NEW_ATOMIC(t) ((t*)GC_MALLOC_ATOMIC(sizeof(t)))
779 #define GC_NEW_STUBBORN(t) ((t*)GC_MALLOC_STUBBORN(sizeof(t)))
780 #define GC_NEW_UNCOLLECTABLE(t) ((t*)GC_MALLOC_UNCOLLECTABLE(sizeof(t)))
782 #ifdef GC_REQUIRE_WCSDUP
783 /* This might be unavailable on some targets (or not needed). */
784 /* wchar_t should be defined in stddef.h */
785 GC_API wchar_t * GC_CALL GC_wcsdup(const wchar_t *) GC_ATTR_MALLOC;
786 GC_API wchar_t * GC_CALL GC_debug_wcsdup(const wchar_t *,
787 GC_EXTRA_PARAMS) GC_ATTR_MALLOC;
789 # define GC_WCSDUP(s) GC_debug_wcsdup(s, GC_EXTRAS)
791 # define GC_WCSDUP(s) GC_wcsdup(s)
793 #endif /* GC_REQUIRE_WCSDUP */
795 /* Finalization. Some of these primitives are grossly unsafe. */
796 /* The idea is to make them both cheap, and sufficient to build */
797 /* a safer layer, closer to Modula-3, Java, or PCedar finalization. */
798 /* The interface represents my conclusions from a long discussion */
799 /* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */
800 /* Christian Jacobi, and Russ Atkinson. It's not perfect, and */
801 /* probably nobody else agrees with it. Hans-J. Boehm 3/13/92 */
802 typedef void (GC_CALLBACK * GC_finalization_proc)(void * /* obj */,
803 void * /* client_data */);
805 GC_API void GC_CALL GC_register_finalizer(void * /* obj */,
806 GC_finalization_proc /* fn */, void * /* cd */,
807 GC_finalization_proc * /* ofn */, void ** /* ocd */);
808 GC_API void GC_CALL GC_debug_register_finalizer(void * /* obj */,
809 GC_finalization_proc /* fn */, void * /* cd */,
810 GC_finalization_proc * /* ofn */, void ** /* ocd */);
811 /* When obj is no longer accessible, invoke */
812 /* (*fn)(obj, cd). If a and b are inaccessible, and */
813 /* a points to b (after disappearing links have been */
814 /* made to disappear), then only a will be */
815 /* finalized. (If this does not create any new */
816 /* pointers to b, then b will be finalized after the */
817 /* next collection.) Any finalizable object that */
818 /* is reachable from itself by following one or more */
819 /* pointers will not be finalized (or collected). */
820 /* Thus cycles involving finalizable objects should */
821 /* be avoided, or broken by disappearing links. */
822 /* All but the last finalizer registered for an object */
824 /* Finalization may be removed by passing 0 as fn. */
825 /* Finalizers are implicitly unregistered when they are */
826 /* enqueued for finalization (i.e. become ready to be */
828 /* The old finalizer and client data are stored in */
829 /* *ofn and *ocd. (ofn and/or ocd may be NULL. */
830 /* The allocation lock is held while *ofn and *ocd are */
831 /* updated. In case of error (no memory to register */
832 /* new finalizer), *ofn and *ocd remain unchanged.) */
833 /* Fn is never invoked on an accessible object, */
834 /* provided hidden pointers are converted to real */
835 /* pointers only if the allocation lock is held, and */
836 /* such conversions are not performed by finalization */
838 /* If GC_register_finalizer is aborted as a result of */
839 /* a signal, the object may be left with no */
840 /* finalization, even if neither the old nor new */
841 /* finalizer were NULL. */
842 /* Obj should be the starting address of an object */
843 /* allocated by GC_malloc or friends. Obj may also be */
844 /* NULL or point to something outside GC heap (in this */
845 /* case, fn is ignored, *ofn and *ocd are set to NULL). */
846 /* Note that any garbage collectable object referenced */
847 /* by cd will be considered accessible until the */
848 /* finalizer is invoked. */
850 /* Another versions of the above follow. It ignores */
851 /* self-cycles, i.e. pointers from a finalizable object to */
852 /* itself. There is a stylistic argument that this is wrong, */
853 /* but it's unavoidable for C++, since the compiler may */
854 /* silently introduce these. It's also benign in that specific */
855 /* case. And it helps if finalizable objects are split to */
857 /* Note that cd will still be viewed as accessible, even if it */
858 /* refers to the object itself. */
859 GC_API void GC_CALL GC_register_finalizer_ignore_self(void * /* obj */,
860 GC_finalization_proc /* fn */, void * /* cd */,
861 GC_finalization_proc * /* ofn */, void ** /* ocd */);
862 GC_API void GC_CALL GC_debug_register_finalizer_ignore_self(void * /* obj */,
863 GC_finalization_proc /* fn */, void * /* cd */,
864 GC_finalization_proc * /* ofn */, void ** /* ocd */);
866 /* Another version of the above. It ignores all cycles. */
867 /* It should probably only be used by Java implementations. */
868 /* Note that cd will still be viewed as accessible, even if it */
869 /* refers to the object itself. */
870 GC_API void GC_CALL GC_register_finalizer_no_order(void * /* obj */,
871 GC_finalization_proc /* fn */, void * /* cd */,
872 GC_finalization_proc * /* ofn */, void ** /* ocd */);
873 GC_API void GC_CALL GC_debug_register_finalizer_no_order(void * /* obj */,
874 GC_finalization_proc /* fn */, void * /* cd */,
875 GC_finalization_proc * /* ofn */, void ** /* ocd */);
877 /* This is a special finalizer that is useful when an object's */
878 /* finalizer must be run when the object is known to be no */
879 /* longer reachable, not even from other finalizable objects. */
880 /* It behaves like "normal" finalization, except that the */
881 /* finalizer is not run while the object is reachable from */
882 /* other objects specifying unordered finalization. */
883 /* Effectively it allows an object referenced, possibly */
884 /* indirectly, from an unordered finalizable object to override */
885 /* the unordered finalization request. */
886 /* This can be used in combination with finalizer_no_order so */
887 /* as to release resources that must not be released while an */
888 /* object can still be brought back to life by other */
890 /* Only works if GC_java_finalization is set. Probably only */
891 /* of interest when implementing a language that requires */
892 /* unordered finalization (e.g. Java, C#). */
893 GC_API void GC_CALL GC_register_finalizer_unreachable(void * /* obj */,
894 GC_finalization_proc /* fn */, void * /* cd */,
895 GC_finalization_proc * /* ofn */, void ** /* ocd */);
896 GC_API void GC_CALL GC_debug_register_finalizer_unreachable(void * /* obj */,
897 GC_finalization_proc /* fn */, void * /* cd */,
898 GC_finalization_proc * /* ofn */, void ** /* ocd */);
900 #define GC_NO_MEMORY 2 /* Failure due to lack of memory. */
902 /* The following routine may be used to break cycles between */
903 /* finalizable objects, thus causing cyclic finalizable */
904 /* objects to be finalized in the correct order. Standard */
905 /* use involves calling GC_register_disappearing_link(&p), */
906 /* where p is a pointer that is not followed by finalization */
907 /* code, and should not be considered in determining */
908 /* finalization order. */
909 GC_API int GC_CALL GC_register_disappearing_link(void ** /* link */);
910 /* Link should point to a field of a heap allocated */
911 /* object obj. *link will be cleared when obj is */
912 /* found to be inaccessible. This happens BEFORE any */
913 /* finalization code is invoked, and BEFORE any */
914 /* decisions about finalization order are made. */
915 /* This is useful in telling the finalizer that */
916 /* some pointers are not essential for proper */
917 /* finalization. This may avoid finalization cycles. */
918 /* Note that obj may be resurrected by another */
919 /* finalizer, and thus the clearing of *link may */
920 /* be visible to non-finalization code. */
921 /* There's an argument that an arbitrary action should */
922 /* be allowed here, instead of just clearing a pointer. */
923 /* But this causes problems if that action alters, or */
924 /* examines connectivity. Returns GC_DUPLICATE if link */
925 /* was already registered, GC_SUCCESS if registration */
926 /* succeeded, GC_NO_MEMORY if it failed for lack of */
927 /* memory, and GC_oom_fn did not handle the problem. */
928 /* Only exists for backward compatibility. See below: */
930 GC_API int GC_CALL GC_general_register_disappearing_link(void ** /* link */,
932 /* A slight generalization of the above. *link is */
933 /* cleared when obj first becomes inaccessible. This */
934 /* can be used to implement weak pointers easily and */
935 /* safely. Typically link will point to a location */
936 /* holding a disguised pointer to obj. (A pointer */
937 /* inside an "atomic" object is effectively disguised.) */
938 /* In this way, weak pointers are broken before any */
939 /* object reachable from them gets finalized. */
940 /* Each link may be registered only with one obj value, */
941 /* i.e. all objects but the last one (link registered */
942 /* with) are ignored. This was added after a long */
943 /* email discussion with John Ellis. */
944 /* link must be non-NULL (and be properly aligned). */
945 /* obj must be a pointer to the first word of an object */
946 /* allocated by GC_malloc or friends. It is unsafe to */
947 /* explicitly deallocate the object containing link. */
948 /* Explicit deallocation of obj may or may not cause */
949 /* link to eventually be cleared. */
950 /* This function can be used to implement certain types */
951 /* of weak pointers. Note, however, this generally */
952 /* requires that the allocation lock is held (see */
953 /* GC_call_with_alloc_lock() below) when the disguised */
954 /* pointer is accessed. Otherwise a strong pointer */
955 /* could be recreated between the time the collector */
956 /* decides to reclaim the object and the link is */
957 /* cleared. Returns GC_SUCCESS if registration */
958 /* succeeded (a new link is registered), GC_DUPLICATE */
959 /* if link was already registered (with some object), */
960 /* GC_NO_MEMORY if registration failed for lack of */
961 /* memory (and GC_oom_fn did not handle the problem). */
963 GC_API int GC_CALL GC_unregister_disappearing_link(void ** /* link */);
964 /* Undoes a registration by either of the above two */
965 /* routines. Returns 0 if link was not actually */
966 /* registered (otherwise returns 1). */
968 /* Returns !=0 if GC_invoke_finalizers has something to do. */
969 GC_API int GC_CALL GC_should_invoke_finalizers(void);
971 GC_API int GC_CALL GC_invoke_finalizers(void);
972 /* Run finalizers for all objects that are ready to */
973 /* be finalized. Return the number of finalizers */
974 /* that were run. Normally this is also called */
975 /* implicitly during some allocations. If */
976 /* GC_finalize_on_demand is nonzero, it must be called */
979 /* Explicitly tell the collector that an object is reachable */
980 /* at a particular program point. This prevents the argument */
981 /* pointer from being optimized away, even it is otherwise no */
982 /* longer needed. It should have no visible effect in the */
983 /* absence of finalizers or disappearing links. But it may be */
984 /* needed to prevent finalizers from running while the */
985 /* associated external resource is still in use. */
986 /* The function is sometimes called keep_alive in other */
988 #if defined(__GNUC__) && !defined(__INTEL_COMPILER)
989 # define GC_reachable_here(ptr) \
990 __asm__ __volatile__(" " : : "X"(ptr) : "memory")
992 GC_API void GC_CALL GC_noop1(GC_word);
993 # define GC_reachable_here(ptr) GC_noop1((GC_word)(ptr))
996 /* GC_set_warn_proc can be used to redirect or filter warning messages. */
997 /* p may not be a NULL pointer. Both the setter and the getter acquire */
998 /* the GC lock (to avoid data races). */
999 typedef void (GC_CALLBACK * GC_warn_proc)(char * /* msg */,
1001 GC_API void GC_CALL GC_set_warn_proc(GC_warn_proc /* p */);
1002 /* GC_get_warn_proc returns the current warn_proc. */
1003 GC_API GC_warn_proc GC_CALL GC_get_warn_proc(void);
1005 /* GC_ignore_warn_proc may be used as an argument for GC_set_warn_proc */
1006 /* to suppress all warnings (unless statistics printing is turned on). */
1007 GC_API void GC_CALLBACK GC_ignore_warn_proc(char *, GC_word);
1009 /* The following is intended to be used by a higher level */
1010 /* (e.g. Java-like) finalization facility. It is expected */
1011 /* that finalization code will arrange for hidden pointers to */
1012 /* disappear. Otherwise objects can be accessed after they */
1013 /* have been collected. */
1014 /* Note that putting pointers in atomic objects or in */
1015 /* non-pointer slots of "typed" objects is equivalent to */
1016 /* disguising them in this way, and may have other advantages. */
1017 typedef GC_word GC_hidden_pointer;
1018 #define GC_HIDE_POINTER(p) (~(GC_hidden_pointer)(p))
1019 /* Converting a hidden pointer to a real pointer requires verifying */
1020 /* that the object still exists. This involves acquiring the */
1021 /* allocator lock to avoid a race with the collector. */
1022 #define GC_REVEAL_POINTER(p) ((void *)GC_HIDE_POINTER(p))
1024 #if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS)
1025 /* This exists only for compatibility (the GC-prefixed symbols are */
1026 /* preferred for new code). */
1027 # define HIDE_POINTER(p) GC_HIDE_POINTER(p)
1028 # define REVEAL_POINTER(p) GC_REVEAL_POINTER(p)
1031 typedef void * (GC_CALLBACK * GC_fn_type)(void * /* client_data */);
1032 GC_API void * GC_CALL GC_call_with_alloc_lock(GC_fn_type /* fn */,
1033 void * /* client_data */);
1035 /* These routines are intended to explicitly notify the collector */
1036 /* of new threads. Often this is unnecessary because thread creation */
1037 /* is implicitly intercepted by the collector, using header-file */
1038 /* defines, or linker-based interception. In the long run the intent */
1039 /* is to always make redundant registration safe. In the short run, */
1040 /* this is being implemented a platform at a time. */
1041 /* The interface is complicated by the fact that we probably will not */
1042 /* ever be able to automatically determine the stack base for thread */
1043 /* stacks on all platforms. */
1045 /* Structure representing the base of a thread stack. On most */
1046 /* platforms this contains just a single address. */
1047 struct GC_stack_base {
1048 void * mem_base; /* Base of memory stack. */
1049 # if defined(__ia64) || defined(__ia64__) || defined(_M_IA64)
1050 void * reg_base; /* Base of separate register stack. */
1054 typedef void * (GC_CALLBACK * GC_stack_base_func)(
1055 struct GC_stack_base * /* sb */, void * /* arg */);
1057 /* Call a function with a stack base structure corresponding to */
1058 /* somewhere in the GC_call_with_stack_base frame. This often can */
1059 /* be used to provide a sufficiently accurate stack base. And we */
1060 /* implement it everywhere. */
1061 GC_API void * GC_CALL GC_call_with_stack_base(GC_stack_base_func /* fn */,
1064 #define GC_SUCCESS 0
1065 #define GC_DUPLICATE 1 /* Was already registered. */
1066 #define GC_NO_THREADS 2 /* No thread support in GC. */
1067 /* GC_NO_THREADS is not returned by any GC function anymore. */
1068 #define GC_UNIMPLEMENTED 3 /* Not yet implemented on this platform. */
1070 #if defined(GC_DARWIN_THREADS) || defined(GC_WIN32_THREADS)
1071 /* Use implicit thread registration and processing (via Win32 DllMain */
1072 /* or Darwin task_threads). Deprecated. Must be called before */
1073 /* GC_INIT() and other GC routines. Should be avoided if */
1074 /* GC_pthread_create, GC_beginthreadex (or GC_CreateThread) could be */
1075 /* called instead. Disables parallelized GC on Win32. */
1076 GC_API void GC_CALL GC_use_threads_discovery(void);
1080 /* Return the signal number (constant) used by the garbage collector */
1081 /* to suspend threads on POSIX systems. Return -1 otherwise. */
1082 GC_API int GC_CALL GC_get_suspend_signal(void);
1084 /* Explicitly enable GC_register_my_thread() invocation. */
1085 /* Done implicitly if a GC thread-creation function is called (or */
1086 /* implicit thread registration is activated). Otherwise, it must */
1087 /* be called from the main (or any previously registered) thread */
1088 /* between the collector initialization and the first explicit */
1089 /* registering of a thread (it should be called as late as possible). */
1090 GC_API void GC_CALL GC_allow_register_threads(void);
1092 /* Register the current thread, with the indicated stack base, as */
1093 /* a new thread whose stack(s) should be traced by the GC. If it */
1094 /* is not implicitly called by the GC, this must be called before a */
1095 /* thread can allocate garbage collected memory, or assign pointers */
1096 /* to the garbage collected heap. Once registered, a thread will be */
1097 /* stopped during garbage collections. */
1098 /* This call must be previously enabled (see above). */
1099 /* This should never be called from the main thread, where it is */
1100 /* always done implicitly. This is normally done implicitly if GC_ */
1101 /* functions are called to create the thread, e.g. by including gc.h */
1102 /* (which redefines some system functions) before calling the system */
1103 /* thread creation function. Nonetheless, thread cleanup routines */
1104 /* (eg., pthread key destructor) typically require manual thread */
1105 /* registering (and unregistering) if pointers to GC-allocated */
1106 /* objects are manipulated inside. */
1107 /* It is also always done implicitly on some platforms if */
1108 /* GC_use_threads_discovery() is called at start-up. Except for the */
1109 /* latter case, the explicit call is normally required for threads */
1110 /* created by third-party libraries. */
1111 /* A manually registered thread requires manual unregistering. */
1112 GC_API int GC_CALL GC_register_my_thread(const struct GC_stack_base *);
1114 /* Unregister the current thread. Only an explicitly registered */
1115 /* thread (i.e. for which GC_register_my_thread() returns GC_SUCCESS) */
1116 /* is allowed (and required) to call this function. (As a special */
1117 /* exception, it is also allowed to once unregister the main thread.) */
1118 /* The thread may no longer allocate garbage collected memory or */
1119 /* manipulate pointers to the garbage collected heap after making */
1120 /* this call. Specifically, if it wants to return or otherwise */
1121 /* communicate a pointer to the garbage-collected heap to another */
1122 /* thread, it must do this before calling GC_unregister_my_thread, */
1123 /* most probably by saving it in a global data structure. Must not */
1124 /* be called inside a GC callback function (except for */
1125 /* GC_call_with_stack_base() one). */
1126 GC_API int GC_CALL GC_unregister_my_thread(void);
1127 #endif /* GC_THREADS */
1129 /* Wrapper for functions that are likely to block (or, at least, do not */
1130 /* allocate garbage collected memory and/or manipulate pointers to the */
1131 /* garbage collected heap) for an appreciable length of time. While fn */
1132 /* is running, the collector is said to be in the "inactive" state for */
1133 /* the current thread (this means that the thread is not suspended and */
1134 /* the thread's stack frames "belonging" to the functions in the */
1135 /* "inactive" state are not scanned during garbage collections). It is */
1136 /* allowed for fn to call GC_call_with_gc_active() (even recursively), */
1137 /* thus temporarily toggling the collector's state back to "active". */
1138 GC_API void * GC_CALL GC_do_blocking(GC_fn_type /* fn */,
1139 void * /* client_data */);
1141 /* Call a function switching to the "active" state of the collector for */
1142 /* the current thread (i.e. the user function is allowed to call any */
1143 /* GC function and/or manipulate pointers to the garbage collected */
1144 /* heap). GC_call_with_gc_active() has the functionality opposite to */
1145 /* GC_do_blocking() one. It is assumed that the collector is already */
1146 /* initialized and the current thread is registered. fn may toggle */
1147 /* the collector thread's state temporarily to "inactive" one by using */
1148 /* GC_do_blocking. GC_call_with_gc_active() often can be used to */
1149 /* provide a sufficiently accurate stack base. */
1150 GC_API void * GC_CALL GC_call_with_gc_active(GC_fn_type /* fn */,
1151 void * /* client_data */);
1153 /* Attempt to fill in the GC_stack_base structure with the stack base */
1154 /* for this thread. This appears to be required to implement anything */
1155 /* like the JNI AttachCurrentThread in an environment in which new */
1156 /* threads are not automatically registered with the collector. */
1157 /* It is also unfortunately hard to implement well on many platforms. */
1158 /* Returns GC_SUCCESS or GC_UNIMPLEMENTED. This function acquires the */
1159 /* GC lock on some platforms. */
1160 GC_API int GC_CALL GC_get_stack_base(struct GC_stack_base *);
1162 /* The following routines are primarily intended for use with a */
1163 /* preprocessor which inserts calls to check C pointer arithmetic. */
1164 /* They indicate failure by invoking the corresponding _print_proc. */
1166 /* Check that p and q point to the same object. */
1167 /* Fail conspicuously if they don't. */
1168 /* Returns the first argument. */
1169 /* Succeeds if neither p nor q points to the heap. */
1170 /* May succeed if both p and q point to between heap objects. */
1171 GC_API void * GC_CALL GC_same_obj(void * /* p */, void * /* q */);
1173 /* Checked pointer pre- and post- increment operations. Note that */
1174 /* the second argument is in units of bytes, not multiples of the */
1175 /* object size. This should either be invoked from a macro, or the */
1176 /* call should be automatically generated. */
1177 GC_API void * GC_CALL GC_pre_incr(void **, ptrdiff_t /* how_much */);
1178 GC_API void * GC_CALL GC_post_incr(void **, ptrdiff_t /* how_much */);
1180 /* Check that p is visible */
1181 /* to the collector as a possibly pointer containing location. */
1182 /* If it isn't fail conspicuously. */
1183 /* Returns the argument in all cases. May erroneously succeed */
1184 /* in hard cases. (This is intended for debugging use with */
1185 /* untyped allocations. The idea is that it should be possible, though */
1186 /* slow, to add such a call to all indirect pointer stores.) */
1187 /* Currently useless for multi-threaded worlds. */
1188 GC_API void * GC_CALL GC_is_visible(void * /* p */);
1190 /* Check that if p is a pointer to a heap page, then it points to */
1191 /* a valid displacement within a heap object. */
1192 /* Fail conspicuously if this property does not hold. */
1193 /* Uninteresting with GC_all_interior_pointers. */
1194 /* Always returns its argument. */
1195 GC_API void * GC_CALL GC_is_valid_displacement(void * /* p */);
1197 /* Explicitly dump the GC state. This is most often called from the */
1198 /* debugger, or by setting the GC_DUMP_REGULARLY environment variable, */
1199 /* but it may be useful to call it from client code during debugging. */
1200 /* Defined only if the library has been compiled without NO_DEBUGGING. */
1201 GC_API void GC_CALL GC_dump(void);
1203 /* Safer, but slow, pointer addition. Probably useful mainly with */
1204 /* a preprocessor. Useful only for heap pointers. */
1205 /* Only the macros without trailing digits are meant to be used */
1206 /* by clients. These are designed to model the available C pointer */
1207 /* arithmetic expressions. */
1208 /* Even then, these are probably more useful as */
1209 /* documentation than as part of the API. */
1210 /* Note that GC_PTR_ADD evaluates the first argument more than once. */
1211 #if defined(GC_DEBUG) && defined(__GNUC__)
1212 # define GC_PTR_ADD3(x, n, type_of_result) \
1213 ((type_of_result)GC_same_obj((x)+(n), (x)))
1214 # define GC_PRE_INCR3(x, n, type_of_result) \
1215 ((type_of_result)GC_pre_incr((void **)(&(x)), (n)*sizeof(*x)))
1216 # define GC_POST_INCR3(x, n, type_of_result) \
1217 ((type_of_result)GC_post_incr((void **)(&(x)), (n)*sizeof(*x)))
1218 # define GC_PTR_ADD(x, n) GC_PTR_ADD3(x, n, typeof(x))
1219 # define GC_PRE_INCR(x, n) GC_PRE_INCR3(x, n, typeof(x))
1220 # define GC_POST_INCR(x) GC_POST_INCR3(x, 1, typeof(x))
1221 # define GC_POST_DECR(x) GC_POST_INCR3(x, -1, typeof(x))
1222 #else /* !GC_DEBUG || !__GNUC__ */
1223 /* We can't do this right without typeof, which ANSI decided was not */
1224 /* sufficiently useful. Without it we resort to the non-debug version. */
1225 /* FIXME: This should eventually support C++0x decltype. */
1226 # define GC_PTR_ADD(x, n) ((x)+(n))
1227 # define GC_PRE_INCR(x, n) ((x) += (n))
1228 # define GC_POST_INCR(x) ((x)++)
1229 # define GC_POST_DECR(x) ((x)--)
1230 #endif /* !GC_DEBUG || !__GNUC__ */
1232 /* Safer assignment of a pointer to a non-stack location. */
1234 # define GC_PTR_STORE(p, q) \
1235 (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q))
1237 # define GC_PTR_STORE(p, q) (*(p) = (q))
1240 /* Functions called to report pointer checking errors */
1241 GC_API void (GC_CALLBACK * GC_same_obj_print_proc)(void * /* p */,
1243 GC_API void (GC_CALLBACK * GC_is_valid_displacement_print_proc)(void *);
1244 GC_API void (GC_CALLBACK * GC_is_visible_print_proc)(void *);
1247 /* For pthread support, we generally need to intercept a number of */
1248 /* thread library calls. We do that here by macro defining them. */
1249 # include "gc_pthread_redirects.h"
1252 /* This returns a list of objects, linked through their first word. */
1253 /* Its use can greatly reduce lock contention problems, since the */
1254 /* allocation lock can be acquired and released many fewer times. */
1255 GC_API void * GC_CALL GC_malloc_many(size_t /* lb */);
1256 #define GC_NEXT(p) (*(void * *)(p)) /* Retrieve the next element */
1257 /* in returned list. */
1259 /* A filter function to control the scanning of dynamic libraries. */
1260 /* If implemented, called by GC before registering a dynamic library */
1261 /* (discovered by GC) section as a static data root (called only as */
1262 /* a last reason not to register). The filename of the library, the */
1263 /* address and the length of the memory region (section) are passed. */
1264 /* This routine should return nonzero if that region should be scanned. */
1265 /* Always called with the allocation lock held. Depending on the */
1266 /* platform, might be called with the "world" stopped. */
1267 typedef int (GC_CALLBACK * GC_has_static_roots_func)(
1268 const char * /* dlpi_name */,
1269 void * /* section_start */,
1270 size_t /* section_size */);
1272 /* Register a new callback (a user-supplied filter) to control the */
1273 /* scanning of dynamic libraries. Replaces any previously registered */
1274 /* callback. May be 0 (means no filtering). May be unused on some */
1275 /* platforms (if the filtering is unimplemented or inappropriate). */
1276 GC_API void GC_CALL GC_register_has_static_roots_callback(
1277 GC_has_static_roots_func);
1279 #if defined(GC_WIN32_THREADS) && !defined(GC_PTHREADS)
1281 # ifndef GC_NO_THREAD_DECLS
1284 } /* Including windows.h in an extern "C" context no longer works. */
1287 # if !defined(_WIN32_WCE) && !defined(__CEGCC__)
1288 # include <process.h> /* For _beginthreadex, _endthreadex */
1291 # include <windows.h>
1297 # ifdef GC_UNDERSCORE_STDCALL
1298 /* Explicitly prefix exported/imported WINAPI (__stdcall) symbols */
1299 /* with '_' (underscore). Might be useful if MinGW/x86 is used. */
1300 # define GC_CreateThread _GC_CreateThread
1301 # define GC_ExitThread _GC_ExitThread
1304 /* All threads must be created using GC_CreateThread or */
1305 /* GC_beginthreadex, or must explicitly call GC_register_my_thread */
1306 /* (and call GC_unregister_my_thread before thread termination), so */
1307 /* that they will be recorded in the thread table. For backward */
1308 /* compatibility, it is possible to build the GC with GC_DLL */
1309 /* defined, and to call GC_use_threads_discovery. This implicitly */
1310 /* registers all created threads, but appears to be less robust. */
1311 /* Currently the collector expects all threads to fall through and */
1312 /* terminate normally, or call GC_endthreadex() or GC_ExitThread, */
1313 /* so that the thread is properly unregistered. */
1314 GC_API HANDLE WINAPI GC_CreateThread(
1315 LPSECURITY_ATTRIBUTES /* lpThreadAttributes */,
1316 DWORD /* dwStackSize */,
1317 LPTHREAD_START_ROUTINE /* lpStartAddress */,
1318 LPVOID /* lpParameter */, DWORD /* dwCreationFlags */,
1319 LPDWORD /* lpThreadId */);
1321 # ifndef DECLSPEC_NORETURN
1322 /* Typically defined in winnt.h. */
1323 # define DECLSPEC_NORETURN /* empty */
1326 GC_API DECLSPEC_NORETURN void WINAPI GC_ExitThread(
1327 DWORD /* dwExitCode */);
1329 # if !defined(_WIN32_WCE) && !defined(__CEGCC__)
1330 # if !defined(_UINTPTR_T) && !defined(_UINTPTR_T_DEFINED) \
1331 && !defined(UINTPTR_MAX)
1332 typedef GC_word GC_uintptr_t;
1334 typedef uintptr_t GC_uintptr_t;
1337 GC_API GC_uintptr_t GC_CALL GC_beginthreadex(
1338 void * /* security */, unsigned /* stack_size */,
1339 unsigned (__stdcall *)(void *),
1340 void * /* arglist */, unsigned /* initflag */,
1341 unsigned * /* thrdaddr */);
1343 /* Note: _endthreadex() is not currently marked as no-return in */
1344 /* VC++ and MinGW headers, so we don't mark it neither. */
1345 GC_API void GC_CALL GC_endthreadex(unsigned /* retval */);
1346 # endif /* !_WIN32_WCE */
1348 # endif /* !GC_NO_THREAD_DECLS */
1350 # ifdef GC_WINMAIN_REDIRECT
1351 /* win32_threads.c implements the real WinMain(), which will start */
1352 /* a new thread to call GC_WinMain() after initializing the garbage */
1354 # define WinMain GC_WinMain
1357 /* For compatibility only. */
1358 # define GC_use_DllMain GC_use_threads_discovery
1360 # ifndef GC_NO_THREAD_REDIRECTS
1361 # define CreateThread GC_CreateThread
1362 # define ExitThread GC_ExitThread
1363 # undef _beginthreadex
1364 # define _beginthreadex GC_beginthreadex
1365 # undef _endthreadex
1366 # define _endthreadex GC_endthreadex
1367 /* #define _beginthread { > "Please use _beginthreadex instead of _beginthread" < } */
1368 # endif /* !GC_NO_THREAD_REDIRECTS */
1370 #endif /* GC_WIN32_THREADS */
1372 /* Public setter and getter for switching "unmap as much as possible" */
1373 /* mode on(1) and off(0). Has no effect unless unmapping is turned on. */
1374 /* Has no effect on implicitly-initiated garbage collections. Initial */
1375 /* value is controlled by GC_FORCE_UNMAP_ON_GCOLLECT. The setter and */
1376 /* getter are unsynchronized. */
1377 GC_API void GC_CALL GC_set_force_unmap_on_gcollect(int);
1378 GC_API int GC_CALL GC_get_force_unmap_on_gcollect(void);
1380 /* Fully portable code should call GC_INIT() from the main program */
1381 /* before making any other GC_ calls. On most platforms this is a */
1382 /* no-op and the collector self-initializes. But a number of */
1383 /* platforms make that too hard. */
1384 /* A GC_INIT call is required if the collector is built with */
1385 /* THREAD_LOCAL_ALLOC defined and the initial allocation call is not */
1386 /* to GC_malloc() or GC_malloc_atomic(). */
1389 /* Similarly gnu-win32 DLLs need explicit initialization from the */
1390 /* main program, as does AIX. */
1391 extern int _data_start__[], _data_end__[], _bss_start__[], _bss_end__[];
1392 # define GC_DATASTART (_data_start__ < _bss_start__ ? \
1393 (void *)_data_start__ : (void *)_bss_start__)
1394 # define GC_DATAEND (_data_end__ > _bss_end__ ? \
1395 (void *)_data_end__ : (void *)_bss_end__)
1396 # define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND); \
1397 GC_gcollect() /* For blacklisting. */
1398 /* Required at least if GC is in a DLL. And doesn't hurt. */
1400 extern int _data[], _end[];
1401 # define GC_DATASTART ((void *)((ulong)_data))
1402 # define GC_DATAEND ((void *)((ulong)_end))
1403 # define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND)
1405 # define GC_INIT_CONF_ROOTS /* empty */
1408 #ifdef GC_DONT_EXPAND
1409 /* Set GC_dont_expand to TRUE at start-up */
1410 # define GC_INIT_CONF_DONT_EXPAND GC_set_dont_expand(1)
1412 # define GC_INIT_CONF_DONT_EXPAND /* empty */
1415 #ifdef GC_FORCE_UNMAP_ON_GCOLLECT
1416 /* Turn on "unmap as much as possible on explicit GC" mode at start-up */
1417 # define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT \
1418 GC_set_force_unmap_on_gcollect(1)
1420 # define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT /* empty */
1423 #ifdef GC_MAX_RETRIES
1424 /* Set GC_max_retries to the desired value at start-up */
1425 # define GC_INIT_CONF_MAX_RETRIES GC_set_max_retries(GC_MAX_RETRIES)
1427 # define GC_INIT_CONF_MAX_RETRIES /* empty */
1430 #ifdef GC_FREE_SPACE_DIVISOR
1431 /* Set GC_free_space_divisor to the desired value at start-up */
1432 # define GC_INIT_CONF_FREE_SPACE_DIVISOR \
1433 GC_set_free_space_divisor(GC_FREE_SPACE_DIVISOR)
1435 # define GC_INIT_CONF_FREE_SPACE_DIVISOR /* empty */
1439 /* Set GC_full_freq to the desired value at start-up */
1440 # define GC_INIT_CONF_FULL_FREQ GC_set_full_freq(GC_FULL_FREQ)
1442 # define GC_INIT_CONF_FULL_FREQ /* empty */
1445 #ifdef GC_TIME_LIMIT
1446 /* Set GC_time_limit to the desired value at start-up */
1447 # define GC_INIT_CONF_TIME_LIMIT GC_set_time_limit(GC_TIME_LIMIT)
1449 # define GC_INIT_CONF_TIME_LIMIT /* empty */
1452 #ifdef GC_MAXIMUM_HEAP_SIZE
1453 /* Limit the heap size to the desired value (useful for debugging). */
1454 /* The limit could be overridden either at the program start-up by */
1455 /* the similar environment variable or anytime later by the */
1456 /* corresponding API function call. */
1457 # define GC_INIT_CONF_MAXIMUM_HEAP_SIZE \
1458 GC_set_max_heap_size(GC_MAXIMUM_HEAP_SIZE)
1460 # define GC_INIT_CONF_MAXIMUM_HEAP_SIZE /* empty */
1463 #ifdef GC_IGNORE_WARN
1464 /* Turn off all warnings at start-up (after GC initialization) */
1465 # define GC_INIT_CONF_IGNORE_WARN GC_set_warn_proc(GC_ignore_warn_proc)
1467 # define GC_INIT_CONF_IGNORE_WARN /* empty */
1470 #ifdef GC_INITIAL_HEAP_SIZE
1471 /* Set heap size to the desired value at start-up */
1472 # define GC_INIT_CONF_INITIAL_HEAP_SIZE \
1473 { size_t heap_size = GC_get_heap_size(); \
1474 if (heap_size < (GC_INITIAL_HEAP_SIZE)) \
1475 (void)GC_expand_hp((GC_INITIAL_HEAP_SIZE) - heap_size); }
1477 # define GC_INIT_CONF_INITIAL_HEAP_SIZE /* empty */
1480 /* Portable clients should call this at the program start-up. More */
1481 /* over, some platforms require this call to be done strictly from the */
1482 /* primordial thread. */
1483 #define GC_INIT() { GC_INIT_CONF_DONT_EXPAND; /* pre-init */ \
1484 GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT; \
1485 GC_INIT_CONF_MAX_RETRIES; \
1486 GC_INIT_CONF_FREE_SPACE_DIVISOR; \
1487 GC_INIT_CONF_FULL_FREQ; \
1488 GC_INIT_CONF_TIME_LIMIT; \
1489 GC_INIT_CONF_MAXIMUM_HEAP_SIZE; \
1490 GC_init(); /* real GC initialization */ \
1491 GC_INIT_CONF_ROOTS; /* post-init */ \
1492 GC_INIT_CONF_IGNORE_WARN; \
1493 GC_INIT_CONF_INITIAL_HEAP_SIZE; }
1495 /* win32S may not free all resources on process exit. */
1496 /* This explicitly deallocates the heap. */
1497 GC_API void GC_CALL GC_win32_free_heap(void);
1499 #if defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB)
1500 /* Allocation really goes through GC_amiga_allocwrapper_do */
1501 # include "gc_amiga_redirects.h"
1505 } /* end of extern "C" */