X-Git-Url: http://wien.tomnetworks.com/gitweb/?p=coreboot.git;a=blobdiff_plain;f=src%2Fsouthbridge%2Fintel%2Fbd82x6x%2Flpc.c;fp=src%2Fsouthbridge%2Fintel%2Fbd82x6x%2Flpc.c;h=1ecaf8fca9873c50b320976f622f501916f3f093;hp=0000000000000000000000000000000000000000;hb=8e073829ec69ee89b3e91f4c040c96988084a526;hpb=cb91e1525eb0b81f9bc2e24e3404d6a9efc1cce3 diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c new file mode 100644 index 000000000..1ecaf8fca --- /dev/null +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -0,0 +1,678 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pch.h" + +#define NMI_OFF 0 + +#define ENABLE_ACPI_MODE_IN_COREBOOT 0 +#define TEST_SMM_FLASH_LOCKDOWN 0 + +typedef struct southbridge_intel_bd82x6x_config config_t; + +static void pch_enable_apic(struct device *dev) +{ + int i; + u32 reg32; + volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); + volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); + + /* Enable ACPI I/O and power management. + * Set SCI IRQ to IRQ9 + */ + pci_write_config8(dev, ACPI_CNTL, 0x80); + + *ioapic_index = 0; + *ioapic_data = (1 << 25); + + /* affirm full set of redirection table entries ("write once") */ + *ioapic_index = 1; + reg32 = *ioapic_data; + *ioapic_index = 1; + *ioapic_data = reg32; + + *ioapic_index = 0; + reg32 = *ioapic_data; + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + if (reg32 != (1 << 25)) + die("APIC Error\n"); + + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); + for (i=0; i<3; i++) { + *ioapic_index = i; + printk(BIOS_SPEW, " reg 0x%04x:", i); + reg32 = *ioapic_data; + printk(BIOS_SPEW, " 0x%08x\n", reg32); + } + + *ioapic_index = 3; /* Select Boot Configuration register. */ + *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ +} + +static void pch_enable_serial_irqs(struct device *dev) +{ + /* Set packet length and toggle silent mode bit for one frame. */ + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); +#if !CONFIG_SERIRQ_CONTINUOUS_MODE + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); +#endif +} + +/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +static void pch_pirq_init(device_t dev) +{ + device_t irq_dev; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); + pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); + pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); + pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + + pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); + pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); + pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); + pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + + /* Eric Biederman once said we should let the OS do this. + * I am not so sure anymore he was right. + */ + + for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin=0, int_line=0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ int_line = config->pirqa_routing; break; + case 2: /* INTB# */ int_line = config->pirqb_routing; break; + case 3: /* INTC# */ int_line = config->pirqc_routing; break; + case 4: /* INTD# */ int_line = config->pirqd_routing; break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_gpi_routing(device_t dev) +{ + /* Get the chip configuration */ + config_t *config = dev->chip_info; + u32 reg32 = 0; + + /* An array would be much nicer here, or some + * other method of doing this. + */ + reg32 |= (config->gpi0_routing & 0x03) << 0; + reg32 |= (config->gpi1_routing & 0x03) << 2; + reg32 |= (config->gpi2_routing & 0x03) << 4; + reg32 |= (config->gpi3_routing & 0x03) << 6; + reg32 |= (config->gpi4_routing & 0x03) << 8; + reg32 |= (config->gpi5_routing & 0x03) << 10; + reg32 |= (config->gpi6_routing & 0x03) << 12; + reg32 |= (config->gpi7_routing & 0x03) << 14; + reg32 |= (config->gpi8_routing & 0x03) << 16; + reg32 |= (config->gpi9_routing & 0x03) << 18; + reg32 |= (config->gpi10_routing & 0x03) << 20; + reg32 |= (config->gpi11_routing & 0x03) << 22; + reg32 |= (config->gpi12_routing & 0x03) << 24; + reg32 |= (config->gpi13_routing & 0x03) << 26; + reg32 |= (config->gpi14_routing & 0x03) << 28; + reg32 |= (config->gpi15_routing & 0x03) << 30; + + pci_write_config32(dev, 0xb8, reg32); +} + +static void pch_power_options(device_t dev) +{ + u8 reg8; + u16 reg16, pmbase; + u32 reg32; + const char *state; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + int nmi_option; + + /* Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + */ + get_option(&pwr_on, "power_on_after_fail"); + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + + reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ + reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ + + reg16 &= ~(1 << 10); + reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ + + reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ + + pci_write_config16(dev, GEN_PMCON_3, reg16); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); + + /* Set up NMI on errors. */ + reg8 = inb(0x61); + reg8 &= 0x0f; /* Higher Nibble must be 0 */ + reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ + // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ + reg8 |= (1 << 2); /* PCI SERR# Disable for now */ + outb(reg8, 0x61); + + reg8 = inb(0x70); + nmi_option = NMI_OFF; + get_option(&nmi_option, "nmi"); + if (nmi_option) { + printk(BIOS_INFO, "NMI sources enabled.\n"); + reg8 &= ~(1 << 7); /* Set NMI. */ + } else { + printk(BIOS_INFO, "NMI sources disabled.\n"); + reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ + } + outb(reg8, 0x70); + + /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 &= ~(3 << 0); // SMI# rate 1 minute + reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME +#if DEBUG_PERIODIC_SMIS + /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using + * periodic SMIs. + */ + reg16 |= (3 << 0); // Periodic SMI every 8s +#endif + pci_write_config16(dev, GEN_PMCON_1, reg16); + + // Set the board's GPI routing. + pch_gpi_routing(dev); + + pmbase = pci_read_config16(dev, 0x40) & 0xfffe; + + outl(config->gpe0_en, pmbase + GPE0_EN); + outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); + + /* Set up power management block and determine sleep mode */ + reg32 = inl(pmbase + 0x04); // PM1_CNT + reg32 &= ~(7 << 10); // SLP_TYP + reg32 |= (1 << 0); // SCI_EN + outl(reg32, pmbase + 0x04); + + /* Clear magic status bits to prevent unexpected wake */ + reg32 = RCBA32(0x3310); + reg32 |= (1 << 4)|(1 << 5)|(1 << 0); + RCBA32(0x3310) = reg32; + + reg32 = RCBA32(0x3f02); + reg32 &= ~0xf; + RCBA32(0x3f02) = reg32; +} + +static void pch_rtc_init(struct device *dev) +{ + u8 reg8; + int rtc_failed; + + reg8 = pci_read_config8(dev, GEN_PMCON_3); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(dev, GEN_PMCON_3, reg8); + } + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); + + rtc_init(rtc_failed); +} + +static void pch_pm_init(struct device *dev) +{ + pci_write_config8(dev, 0xa9, 0x47); + RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0)); + RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); + RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); + RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); + RCBA32(0x2304) = 0xc0388400; + RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); + RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); + RCBA32_AND_OR(0x3314, ~0x1f, 0xf); + RCBA32(0x3318) = 0x050f0000; + RCBA32(0x3324) = 0x04000000; + RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); + RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)); + RCBA32(0x3360) = 0x0001c000; + RCBA32(0x3368) = 0x00061100; + RCBA32(0x3378) = 0x7f8fdfff; + RCBA32(0x337c) = 0x000003fc; + RCBA32(0x3388) = 0x00001000; + RCBA32(0x3390) = 0x0001c000; + RCBA32(0x33a0) = 0x00000800; + RCBA32(0x33b0) = 0x00001000; + RCBA32(0x33c0) = 0x00093900; + RCBA32(0x33cc) = 0x24653002; + RCBA32(0x33d0) = 0x062108fe; + RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); + RCBA32(0x3a28) = 0x01010000; + RCBA32(0x3a2c) = 0x01010404; + RCBA32(0x3a80) = 0x01041041; + RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); + RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ + RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ + RCBA32(0x3a6c) = 0x00000001; + RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); + RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); + RCBA32(0x33c8) = 0; + RCBA32_AND_OR(0x21b0, ~0UL, 0xf); +} + +static void enable_hpet(void) +{ + u32 reg32; + + /* Move HPET to default address 0xfed00000 and enable it */ + reg32 = RCBA32(HPTC); + reg32 |= (1 << 7); // HPET Address Enable + reg32 &= ~(3 << 0); + RCBA32(HPTC) = reg32; +} + +static void enable_clock_gating(device_t dev) +{ + u32 reg32; + u16 reg16; + + RCBA32_AND_OR(0x2234, ~0UL, 0xf); + + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 |= (1 << 2) | (1 << 11); + pci_write_config16(dev, GEN_PMCON_1, reg16); + + pch_iobp_update(0xEB007F07, ~0UL, (1 << 31)); + pch_iobp_update(0xEB004000, ~0UL, (1 << 7)); + pch_iobp_update(0xEC007F07, ~0UL, (1 << 31)); + pch_iobp_update(0xEC004000, ~0UL, (1 << 7)); + + reg32 = RCBA32(CG); + reg32 |= (1 << 31); + reg32 |= (1 << 29) | (1 << 28); + reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); + reg32 |= (1 << 16); + reg32 |= (1 << 17); + reg32 |= (1 << 18); + reg32 |= (1 << 22); + reg32 |= (1 << 23); + reg32 &= ~(1 << 20); + reg32 |= (1 << 19); + reg32 |= (1 << 0); + reg32 |= (0xf << 1); + RCBA32(CG) = reg32; + + RCBA32_OR(0x38c0, 0x7); + RCBA32_OR(0x36d4, 0x6680c004); + RCBA32_OR(0x3564, 0x3); +} + +#if CONFIG_HAVE_SMI_HANDLER +static void pch_lock_smm(struct device *dev) +{ +#if TEST_SMM_FLASH_LOCKDOWN + u8 reg8; +#endif + +#if ENABLE_ACPI_MODE_IN_COREBOOT + printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); + outb(0xe1, 0xb2); // Enable ACPI mode + printk(BIOS_DEBUG, "done.\n"); +#else + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); + outb(0x1e, 0xb2); // Disable ACPI mode + printk(BIOS_DEBUG, "done.\n"); +#endif + /* Don't allow evil boot loaders, kernels, or + * userspace applications to deceive us: + */ + smm_lock(); + +#if TEST_SMM_FLASH_LOCKDOWN + /* Now try this: */ + printk(BIOS_DEBUG, "Locking BIOS to RO... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + reg8 &= ~(1 << 0); /* clear BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + reg8 |= (1 << 1); /* set BLE */ + pci_write_config8(dev, 0xdc, reg8); + printk(BIOS_DEBUG, "ok.\n"); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + + printk(BIOS_DEBUG, "Writing:\n"); + *(volatile u8 *)0xfff00000 = 0x00; + printk(BIOS_DEBUG, "Testing:\n"); + reg8 |= (1 << 0); /* set BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + printk(BIOS_DEBUG, "Done.\n"); +#endif +} +#endif + +static void pch_disable_smm_only_flashing(struct device *dev) +{ + u8 reg8; + + printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 &= ~(1 << 5); + pci_write_config8(dev, 0xdc, reg8); +} + +static void pch_fixups(struct device *dev) +{ + u8 gen_pmcon_2; + + /* Indicate DRAM init done for MRC S3 to know it can resume */ + gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); + gen_pmcon_2 |= (1 << 7); + pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); + + /* + * Enable DMI ASPM in the PCH + */ + RCBA32_AND_OR(0x2304, ~(1 << 10), 0); + RCBA32_OR(0x21a4, (1 << 11)|(1 << 10)); + RCBA32_OR(0x21a8, 0x3); +} + +static void pch_decode_init(struct device *dev) +{ + config_t *config = dev->chip_info; + + printk(BIOS_DEBUG, "pch_decode_init\n"); + + pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec); + pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec); + pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec); + pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec); +} + +static void lpc_init(struct device *dev) +{ + printk(BIOS_DEBUG, "pch: lpc_init\n"); + + /* Set the value for PCI command register. */ + pci_write_config16(dev, PCI_COMMAND, 0x000f); + + /* IO APIC initialization. */ + pch_enable_apic(dev); + + pch_enable_serial_irqs(dev); + + /* Setup the PIRQ. */ + pch_pirq_init(dev); + + /* Setup power options. */ + pch_power_options(dev); + + /* Initialize power management */ + pch_pm_init(dev); + + /* Set the state of the GPIO lines. */ + //gpio_init(dev); + + /* Initialize the real time clock. */ + pch_rtc_init(dev); + + /* Initialize ISA DMA. */ + isa_dma_init(); + + /* Initialize the High Precision Event Timers, if present. */ + enable_hpet(); + + /* Initialize Clock Gating */ + enable_clock_gating(dev); + + setup_i8259(); + + /* The OS should do this? */ + /* Interrupt 9 should be level triggered (SCI) */ + i8259_configure_irq_trigger(9, 1); + + pch_disable_smm_only_flashing(dev); + +#if CONFIG_HAVE_SMI_HANDLER + pch_lock_smm(dev); +#endif + + pch_fixups(dev); +} + +static void pch_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void pch_lpc_enable_resources(device_t dev) +{ + pch_decode_init(dev); + return pci_dev_enable_resources(dev); +} + +static void pch_lpc_enable(device_t dev) +{ + /* Enable PCH Display Port */ + RCBA16(DISPBDF) = 0x0010; + RCBA32_OR(FD2, PCH_ENABLE_DBDF); + + pch_enable(dev); +} + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations device_ops = { + .read_resources = pch_lpc_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pch_lpc_enable_resources, + .init = lpc_init, + .enable = pch_lpc_enable, + .scan_bus = scan_static_bus, + .ops_pci = &pci_ops, +}; + + +/* IDs for LPC device of Intel 6 series Chipset and + * Intel C200 Series Chipset according to specification + * update from August 2011 + */ + +static const struct pci_driver q67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4e, +}; +static const struct pci_driver q65_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4c, +}; +static const struct pci_driver b65_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c50, +}; +static const struct pci_driver h67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4a, +}; +static const struct pci_driver z68_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c46, +}; +static const struct pci_driver h61_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c5c, +}; +static const struct pci_driver c202_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c52, +}; +static const struct pci_driver c204_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c54, +}; +static const struct pci_driver c206_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c56, +}; +static const struct pci_driver qm67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4f, +}; +static const struct pci_driver um67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c47, +}; +static const struct pci_driver hm67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4b, +}; +static const struct pci_driver hm65_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c49, +}; +static const struct pci_driver qs67_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1c4d, +}; +static const struct pci_driver c216_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1e55, +};