#include <sys/io.h>
#endif
#if (defined(__MACH__) && defined(__APPLE__))
-/* DirectIO is available here: http://www.coresystems.de/en/directio */
-#include <DirectIO/darwinio.h>
+/* DirectHW is available here: http://www.coreboot.org/DirectHW */
+#include <DirectHW/DirectHW.h>
#endif
#ifdef PCI_SUPPORT
#define INL inl
#endif
+#if defined(__NetBSD__) && (defined(__i386__) || defined(__x86_64__))
+#include <sys/types.h>
+#include <machine/sysarch.h>
+#if defined(__i386__)
+#define iopl i386_iopl
+#elif defined(__x86_64__)
+#define iopl x86_64_iopl
+#endif
+
+static __inline__ void
+outb(uint8_t value, uint16_t port)
+{
+ __asm__ __volatile__ ("outb %b0,%w1": :"a" (value), "Nd" (port));
+}
+
+static __inline__ void
+outw(uint16_t value, uint16_t port)
+{
+ __asm__ __volatile__ ("outw %w0,%w1": :"a" (value), "Nd" (port));
+}
+
+static __inline__ void
+outl(uint32_t value, uint16_t port)
+{
+ __asm__ __volatile__ ("outl %0,%w1": :"a" (value), "Nd" (port));
+}
+
+static __inline__ uint8_t inb(uint16_t port)
+{
+ uint8_t value;
+ __asm__ __volatile__ ("inb %w1,%0":"=a" (value):"Nd" (port));
+ return value;
+}
+
+static __inline__ uint16_t inw(uint16_t port)
+{
+ uint16_t value;
+ __asm__ __volatile__ ("inw %w1,%0":"=a" (value):"Nd" (port));
+ return value;
+}
+
+static __inline__ uint32_t inl(uint16_t port)
+{
+ uint32_t value;
+ __asm__ __volatile__ ("inl %1,%0":"=a" (value):"Nd" (port));
+ return value;
+}
+#endif
+
#define USAGE "Usage: superiotool [-d] [-e] [-l] [-V] [-v] [-h]\n\n\
-d | --dump Dump Super I/O register contents\n\
-e | --extra-dump Dump secondary registers too (e.g. EC registers)\n\
void regwrite(uint16_t port, uint8_t reg, uint8_t val);
void enter_conf_mode_winbond_fintek_ite_8787(uint16_t port);
void exit_conf_mode_winbond_fintek_ite_8787(uint16_t port);
+void enter_conf_mode_fintek_7777(uint16_t port);
+void exit_conf_mode_fintek_7777(uint16_t port);
int superio_unknown(const struct superio_registers reg_table[], uint16_t id);
const char *get_superio_name(const struct superio_registers reg_table[],
uint16_t id);
void probe_idregs_ali(uint16_t port);
void print_ali_chips(void);
+/* amd.c */
+void probe_idregs_amd(uint16_t port);
+void print_amd_chips(void);
+
+/* serverengines.c */
+void probe_idregs_serverengines(uint16_t port);
+void print_serverengines_chips(void);
+
/* fintek.c */
void probe_idregs_fintek(uint16_t port);
+void probe_idregs_fintek_alternative(uint16_t port);
void print_fintek_chips(void);
+/* infineon.c */
+void probe_idregs_infineon(uint16_t port);
+void print_infineon_chips(void);
+
/* ite.c */
void probe_idregs_ite(uint16_t port);
void print_ite_chips(void);
} superio_ports_table[] = {
{probe_idregs_ali, {0x3f0, 0x370, EOT}},
{probe_idregs_fintek, {0x2e, 0x4e, EOT}},
+ {probe_idregs_fintek_alternative, {0x2e, 0x4e, EOT}},
/* Only use 0x370 for ITE, but 0x3f0 or 0x3bd would also be valid. */
- {probe_idregs_ite, {0x2e, 0x4e, 0x370, EOT}},
- {probe_idregs_nsc, {0x2e, 0x4e, 0x15c, EOT}},
+ {probe_idregs_ite, {0x25e, 0x2e, 0x4e, 0x370, EOT}},
+ {probe_idregs_nsc, {0x2e, 0x4e, 0x15c, 0x164e, EOT}},
/* I/O pairs on Nuvoton EC chips can be configured by firmware in
* addition to the following hardware strapping options. */
- {probe_idregs_nuvoton, {0x164e, 0x2e, EOT}},
+ {probe_idregs_nuvoton, {0x164e, 0x2e, 0x4e, EOT}},
{probe_idregs_smsc, {0x2e, 0x4e, 0x162e, 0x164e, 0x3f0, 0x370, EOT}},
{probe_idregs_winbond, {0x2e, 0x4e, 0x3f0, 0x370, 0x250, EOT}},
#ifdef PCI_SUPPORT
{probe_idregs_via, {0x3f0, EOT}},
+ /* in fact read the BASE from HW */
+ {probe_idregs_amd, {0xaa, EOT}},
#endif
+ {probe_idregs_serverengines, {0x2e, EOT}},
+ {probe_idregs_infineon, {0x2e, 0x4e}},
};
/** Table of functions to print out supported Super I/O chips. */
{print_winbond_chips},
#ifdef PCI_SUPPORT
{print_via_chips},
+ {print_amd_chips},
#endif
+ {print_serverengines_chips},
+ {print_infineon_chips},
};
#endif