u8 regval;
regval = pci_read_config8(dev, 0x51);
- regval |= 0x05;
+ regval |= 0x05;
regval &= 0xfd;
pci_write_config8(dev, 0x51, regval);
void dump_south(device_t dev0)
{
int i,j;
-
+
for(i = 0; i < 256; i += 16) {
printk(BIOS_DEBUG, "0x%x: ", i);
for(j = 0; j < 16; j++) {
model = pci_read_config16(dev,0x2);
printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model);
-
+
/* If this is not the southbridge itself just return.
* This is necessary because USB devices are slot 10, whereas this
- * device is slot 11 therefore usb devices get called first during
+ * device is slot 11 therefore usb devices get called first during
* the bus scan. We don't want to wait until we could do dev->init
* because that's too late.
*/
/* enable RTC and ethernet */
regval = pci_read_config8(dev, 0x51);
- regval |= 0x18;
+ regval |= 0x18;
pci_write_config8(dev, 0x51, regval);
/* turn on keyboard */
keyboard_on(dev);
- /* enable USB 1.1 & USB 2.0 - redundant really since we've
+ /* enable USB 1.1 & USB 2.0 - redundant really since we've
* already been there - see note above
*/
regval = pci_read_config8(dev, 0x50);