typedef struct southbridge_intel_i82801ax_config config_t;
-/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+/* PIRQ[n]_ROUT[3:0] - IRQ Routing (ISA compatible)
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
- * PIRQ[n]_ROUT[7] - PIRQ Routing Control
- * 0x80 - The PIRQ is not routed.
+ *
+ * PIRQ[n]_ROUT[7] - Interrupt Routing Enable (IRQEN)
+ * 0 - The PIRQ is routed to the ISA-compatible interrupt specified above.
+ * 1 - The PIRQ is not routed to the 8259.
*/
#define PIRQA 0x03
* Use 0x0ef8 for a bitmap to cover all these IRQ's.
* Use the defined IRQ values above or set mainboard
* specific IRQ values in your mainboards Config.lb.
-*/
-
+ */
static void i82801ax_enable_apic(struct device *dev)
{
- uint32_t reg32;
- volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000;
- volatile uint32_t *ioapic_data = (volatile uint32_t *)0xfec00010;
+ u32 reg32;
+ volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
+ volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
/* Set ACPI base address (I/O space). */
pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1));
- /* Enable ACPI I/O and power management. */
- pci_write_config8(dev, ACPI_CNTL, 0x10);
+ /* Enable ACPI I/O range decode and ACPI power management. */
+ pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
reg32 = pci_read_config32(dev, GEN_CNTL);
- reg32 |= (3 << 7); /* Enable IOAPIC */
- reg32 |= (1 << 13); /* Coprocessor error enable */
- reg32 |= (1 << 1); /* Delayed transaction enable */
- reg32 |= (1 << 2); /* DMA collection buffer enable */
+ reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */
+ reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */
+ reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */
+ reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */
pci_write_config32(dev, GEN_CNTL, reg32);
printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32);
/* TODO: Explain/#define the real meaning of these magic numbers. */
}
-static void i82801ax_pirq_init(device_t dev, uint16_t ich_model)
+static void i82801ax_pirq_init(device_t dev)
{
- /* Get the chip configuration */
+ u8 reg8;
config_t *config = dev->chip_info;
- if (config->pirqa_routing) {
- pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
- } else {
- pci_write_config8(dev, PIRQA_ROUT, PIRQA);
- }
+ reg8 = (config->pirqa_routing) ? config->pirqa_routing : PIRQA;
+ pci_write_config8(dev, PIRQA_ROUT, reg8);
- if (config->pirqb_routing) {
- pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
- } else {
- pci_write_config8(dev, PIRQB_ROUT, PIRQB);
- }
+ reg8 = (config->pirqb_routing) ? config->pirqb_routing : PIRQB;
+ pci_write_config8(dev, PIRQB_ROUT, reg8);
- if (config->pirqc_routing) {
- pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
- } else {
- pci_write_config8(dev, PIRQC_ROUT, PIRQC);
- }
+ reg8 = (config->pirqc_routing) ? config->pirqc_routing : PIRQC;
+ pci_write_config8(dev, PIRQC_ROUT, reg8);
- if (config->pirqd_routing) {
- pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
- } else {
- pci_write_config8(dev, PIRQD_ROUT, PIRQD);
- }
+ reg8 = (config->pirqd_routing) ? config->pirqd_routing : PIRQD;
+ pci_write_config8(dev, PIRQD_ROUT, reg8);
}
static void i82801ax_power_options(device_t dev)
}
}
-static void gpio_init(device_t dev, uint16_t ich_model)
+static void gpio_init(device_t dev)
{
- pci_write_config32(dev, GPIO_BASE_ICH0_5, (GPIO_BASE_ADDR | 1));
- pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10);
+ pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1));
+ pci_write_config8(dev, GPIO_CNTL, GPIO_EN);
}
static void i82801ax_rtc_init(struct device *dev)
reg8 &= ~(1 << 1); /* Preserve the power fail state. */
pci_write_config8(dev, GEN_PMCON_3, reg8);
}
- reg32 = pci_read_config32(dev, GEN_STS);
+ reg32 = pci_read_config32(dev, GEN_STA);
rtc_failed |= reg32 & (1 << 2);
rtc_init(rtc_failed);
pci_write_config16(dev, PCI_DMA_CFG, reg16);
}
-static void i82801ax_lpc_decode_en(device_t dev, uint16_t ich_model)
+static void i82801ax_lpc_decode_en(device_t dev)
{
/* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB.
* LPT decode defaults to 0x378-0x37F and 0x778-0x77F.
* We also need to set the value for LPC I/F Enables Register.
*/
pci_write_config8(dev, COM_DEC, 0x10);
- pci_write_config16(dev, LPC_EN_ICH0_5, 0x300F);
+ pci_write_config16(dev, LPC_EN, 0x300F);
}
static void lpc_init(struct device *dev)
{
- uint16_t ich_model = pci_read_config16(dev, PCI_DEVICE_ID);
-
/* Set the value for PCI command register. */
pci_write_config16(dev, PCI_COMMAND, 0x000f);
i82801ax_enable_serial_irqs(dev);
/* Setup the PIRQ. */
- i82801ax_pirq_init(dev, ich_model);
+ i82801ax_pirq_init(dev);
/* Setup power options. */
i82801ax_power_options(dev);
/* Set the state of the GPIO lines. */
- gpio_init(dev, ich_model);
+ gpio_init(dev);
/* Initialize the real time clock. */
i82801ax_rtc_init(dev);
isa_dma_init();
/* Setup decode ports and LPC I/F enables. */
- i82801ax_lpc_decode_en(dev, ich_model);
+ i82801ax_lpc_decode_en(dev);
}
static void i82801ax_lpc_read_resources(device_t dev)
.enable = i82801ax_enable,
};
+/* 82801AA (ICH) */
static const struct pci_driver i82801aa_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2410,
};
+/* 82801AB (ICH0) */
static const struct pci_driver i82801ab_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2420,
};
-
projects / coreboot.git / blobdiff