device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
-
+
return do_smbus_recv_byte(res->base, device);
}
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
-
+
return do_smbus_read_byte(res->base, device, address);
}
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
-
+
return do_smbus_write_byte(res->base, device, address, val);
}
*/
byte = pci_read_config8(dev, 0x41);
pci_write_config8(dev, 0x41, byte | (1<<6)|(1<<5));
-
+
/* power on after power fail */
on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
get_option(&on, "power_on_after_fail");
*/
byte = pci_read_config8(dev, 0x4a);
pci_write_config8(dev, 0x4a, byte | (1<<6));
-
+
/* Throttle the CPU speed down for testing */
on = SLOW_CPU_OFF;
get_option(&on, "slow_cpu");
/* Set the class code */
pci_write_config32(dev, 0x60, 0x06800000);
-
+
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
- pci_write_config32(dev, 0x7c,
+ pci_write_config32(dev, 0x7c,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
.init = acpi_init,
.scan_bus = scan_static_bus,
/* We don't need amd8111_enable, chip ops takes care of it.
- * It could be useful if these devices were not
+ * It could be useful if these devices were not
* enabled by default.
*/
// .enable = amd8111_enable,