{
u8 reg8;
- printk_debug("Configuring VIA SATA & EIDE Controller\n");
+ printk(BIOS_DEBUG, "Configuring VIA SATA & EIDE Controller\n");
/* Class IDE Disk, instead of RAID controller */
reg8 = pci_read_config8(dev, 0x45);
pci_write_config8(dev, 0x45, reg8);
#if defined(DISABLE_SATA) && (DISABLE_SATA == 1)
- printk_info("Disabling SATA (Primary Channel)\n");
+ printk(BIOS_INFO, "Disabling SATA (Primary Channel)\n");
/* Disable SATA channels */
pci_write_config8(dev, 0x40, 0x00);
#else
reg8 &= ~0xa0;
pci_write_config8(dev, 0x42, reg8);
reg8 = pci_read_config8(dev, 0x42);
- printk_debug("Reg 0x42 read back as 0x%x\n", reg8);
+ printk(BIOS_DEBUG, "Reg 0x42 read back as 0x%x\n", reg8);
/* Support Staggered Spin-Up */
reg8 = pci_read_config8(dev, 0xb9);
if ((reg8 & 0x8) == 0) {
- printk_debug("start OOB sequence on both drives\n");
+ printk(BIOS_DEBUG, "start OOB sequence on both drives\n");
reg8 |= 0x30;
pci_write_config8(dev, 0xb9, reg8);
}