-/* coherent hypertransport initialization for AMD64
- *
+/* coherent hypertransport initialization for AMD64
+ *
* written by Stefan Reinauer <stepan@openbios.org>
* (c) 2003-2004 by SuSE Linux AG
*
* nodes : 1 2 4 6 8
* org. : 1x1 2x1 2x2 2x3 2x4
Ladder:
- CPU7-------------CPU6
- | |
+ CPU7-------------CPU6
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU5-------------CPU4
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU3-------------CPU2
+ | |
+ | |
+ | |
| |
- | |
- | |
- | |
- | |
- CPU5-------------CPU4
- | |
- | |
- | |
- | |
- | |
- | |
- CPU3-------------CPU2
- | |
- | |
| |
| |
- | |
- | |
- CPU1-------------CPU0
+ CPU1-------------CPU0
CROSS_BAR_47_56:
- CPU7-------------CPU6
- | \____ ___/ |
+ CPU7-------------CPU6
+ | \____ ___/ |
| \ / |
- | \/ |
- | /\ |
- | / \ |
- | ____/ \___ |
- CPU5 CPU4
- | |
- | |
- | |
- | |
- | |
- | |
- CPU3-------------CPU2
- | |
- | |
+ | \/ |
+ | /\ |
+ | / \ |
+ | ____/ \___ |
+ CPU5 CPU4
| |
| |
- | |
- | |
- CPU1-------------CPU0
+ | |
+ | |
+ | |
+ | |
+ CPU3-------------CPU2
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU1-------------CPU0
*/
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/hypertransport_def.h>
+#include <stdlib.h>
#include "arch/romcc_io.h"
+#include <pc80/mc146818rtc.h>
+#if CONFIG_HAVE_OPTION_TABLE
+#include "option_table.h"
+#endif
+
#include "amdk8.h"
#define enable_bsp_routing() enable_routing(0)
#define DEFAULT 0x00010101 /* default row entry */
-typedef uint8_t u8;
-typedef uint32_t u32;
#ifndef CROSS_BAR_47_56
#define CROSS_BAR_47_56 0
#define TRY_HIGH_FIRST 0
#endif
+#ifndef CONFIG_K8_HT_FREQ_1G_SUPPORT
+ #define CONFIG_K8_HT_FREQ_1G_SUPPORT 0
+#endif
+
+#ifndef K8_HT_CHECK_PENDING_LINK
+ #if CONFIG_MAX_PHYSICAL_CPUS >= 4
+ #define K8_HT_CHECK_PENDING_LINK 1
+ #else
+ #define K8_HT_CHECK_PENDING_LINK 0
+ #endif
+#endif
+
+#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED
+ #define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
+#endif
+
+#ifndef CONFIG_ENABLE_APIC_EXT_ID
+ #define CONFIG_ENABLE_APIC_EXT_ID 0
+#endif
+
-static inline void print_linkn (const char *strval, uint8_t byteval)
+static inline void print_linkn (const char *strval, uint8_t byteval)
{
- print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
+ printk(BIOS_DEBUG, "%s%02x\n", strval, byteval);
}
static void disable_probes(void)
* they don't make sense if only one cpu is available
*/
- /* Hypetransport Transaction Control Register
+ /* Hypetransport Transaction Control Register
* F0:0x68
* [ 0: 0] Disable read byte probe
* 0 = Probes issues
print_spew("Disabling read/write/fill probes for UP... ");
- val=pci_read_config32(NODE_HT(0), 0x68);
- val |= (1<<10)|(1<<9)|(1<<8)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1 << 0);
- pci_write_config32(NODE_HT(0), 0x68, val);
+ val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL);
+ val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C |
+ HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P |
+ HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P;
+ pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val);
- print_spew("done.\r\n");
+ print_spew("done.\n");
}
-
-#ifndef ENABLE_APIC_EXT_ID
-#define ENABLE_APIC_EXT_ID 0
-#endif
-
-static void enable_apic_ext_id(u8 node)
+#if 0
+static void enable_apic_ext_id(u8 node)
{
-#if ENABLE_APIC_EXT_ID==1
+#if CONFIG_ENABLE_APIC_EXT_ID==1
#warning "FIXME Is the right place to enable apic ext id here?"
- u32 val;
+ u32 val;
- val = pci_read_config32(NODE_HT(node), 0x68);
- val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
- pci_write_config32(NODE_HT(node), 0x68, val);
+ val = pci_read_config32(NODE_HT(node), 0x68);
+ val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
+ pci_write_config32(NODE_HT(node), 0x68, val);
#endif
}
-
-
+#endif
static void enable_routing(u8 node)
{
print_spew("Enabling routing table for node ");
print_spew_hex8(node);
-// enable_apic_ext_id(node);
-
val=pci_read_config32(NODE_HT(node), 0x6c);
val &= ~((1<<1)|(1<<0));
pci_write_config32(NODE_HT(node), 0x6c, val);
- print_spew(" done.\r\n");
+ print_spew(" done.\n");
}
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
static void fill_row(u8 node, u8 row, u32 value)
{
pci_write_config32(NODE_HT(node), 0x40+(row<<2), value);
}
-#if CONFIG_MAX_CPUS > 1
static u8 link_to_register(int ldt)
{
/*
if (ldt&0x08) return 0x40;
if (ldt&0x04) return 0x20;
if (ldt&0x02) return 0x00;
-
+
/* we should never get here */
print_spew("Unknown Link\n");
return 0;
val=pci_read_config32(NODE_HT(7), 0x60);
val &= (~7); /* clear low bits. */
- val |= node; /* new node */
+ val |= node; /* new node */
pci_write_config32(NODE_HT(7), 0x60, val);
- print_spew(" done.\r\n");
+ print_spew(" done.\n");
}
-static int check_connection(u8 dest)
+static int verify_connection(u8 dest)
{
/* See if we have a valid connection to dest */
u32 val;
* established and actually working by reading the
* remode node's vendor/device id
*/
- val = pci_read_config32(NODE_HT(dest),0);
+ val = pci_read_config32(NODE_HT(dest),0);
if(val != 0x11001022)
return 0;
return 1;
}
-static unsigned read_freq_cap(device_t dev, unsigned pos)
+static uint16_t read_freq_cap(device_t dev, uint8_t pos)
{
/* Handle bugs in valid hypertransport frequency reporting */
- unsigned freq_cap;
+ uint16_t freq_cap;
uint32_t id;
freq_cap = pci_read_config16(dev, pos);
freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
+#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1
+ #if CONFIG_K8_REV_F_SUPPORT == 0
+ if (!is_cpu_pre_e0())
+ #endif
+ {
+ return freq_cap;
+ }
+#endif
+
id = pci_read_config32(dev, 0);
- /* AMD 8131 Errata 48 */
- if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8131_PCIX << 16))) {
- freq_cap &= ~(1 << HT_FREQ_800Mhz);
- }
- /* AMD 8151 Errata 23 */
- if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8151_SYSCTRL << 16))) {
- freq_cap &= ~(1 << HT_FREQ_800Mhz);
- }
/* AMD K8 Unsupported 1Ghz? */
if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
freq_cap &= ~(1 << HT_FREQ_1000Mhz);
}
+
return freq_cap;
}
{
static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 };
static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 };
- uint16_t freq_cap1, freq_cap2, freq_cap, freq_mask;
- uint8_t width_cap1, width_cap2, width_cap, width, old_width, ln_width1, ln_width2;
+ uint16_t freq_cap1, freq_cap2;
+ uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2;
uint8_t freq, old_freq;
int needs_reset;
/* Set link width and frequency */
/* See if I am changing the link freqency */
old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ);
+ old_freq &= 0x0f;
needs_reset |= old_freq != freq;
old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ);
+ old_freq &= 0x0f;
needs_reset |= old_freq != freq;
/* Set the Calulcated link frequency */
ln_width1 = ln_width2;
}
width |= pow2_to_link_width[ln_width1] << 4;
-
+
/* See if I am changing node1's width */
old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1);
+ old_width &= 0x77;
needs_reset |= old_width != width;
/* Set node1's widths */
pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width);
- /* Calculate node2's width */
+ // * Calculate node2's width */
width = ((width & 0x70) >> 4) | ((width & 0x7) << 4);
/* See if I am changing node2's width */
old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1);
+ old_width &= 0x77;
needs_reset |= old_width != width;
/* Set node2's widths */
return needs_reset;
}
+static uint8_t get_linkn_first(uint8_t byte)
+{
+ if(byte & 0x02) { byte = 0; }
+ else if(byte & 0x04) { byte = 1; }
+ else if(byte & 0x08) { byte = 2; }
+ return byte;
+}
+
+#if TRY_HIGH_FIRST == 1
+static uint8_t get_linkn_last(uint8_t byte)
+{
+ if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; }
+ if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; }
+ if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; }
+ return byte>>4;
+}
+#endif
+
+#if (CONFIG_MAX_PHYSICAL_CPUS > 2) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+static uint8_t get_linkn_last_count(uint8_t byte)
+{
+ byte &= 0x0f;
+ if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
+ if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
+ if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
+ return byte>>4;
+}
+#endif
+
static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/
{
- unsigned linkn;
+ uint8_t linkn;
uint32_t val;
val = 1;
- for(linkn = 0; linkn<3; linkn++) {
- unsigned regpos;
+ for(linkn = 0; linkn<3; linkn++) {
+ uint8_t regpos;
uint32_t reg;
regpos = 0x98 + 0x20 * linkn;
reg = pci_read_config32(NODE_HT(source), regpos);
if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/
- val |= 1<<(linkn+1);
+ val |= 1<<(linkn+1);
}
val <<= 16;
val |= 0x0101;
val = 1<<(linkn+1);
val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/
- if(((source &1)!=(dest &1))
+ if(((source &1)!=(dest &1))
#if CROSS_BAR_47_56
- && (source<4) && (dest<4)
+ && ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here
+ //(6,5) (7,4) should be here
#endif
){
val |= (1<<16);
} else {
- /*for CROSS_BAR_47_56 47, 74, 56, 65 should be here too*/
+ /*for CROSS_BAR_47_56 47, 56, should be here too
+ and for 47, 56, 57, 75, 46, 64 we need to substract another link to
+ 6, 7, 6, 6, 7, 7
+ */
val_s = get_row(temp, source);
val |= ((val_s>>16) - (1<<(linkn+1)))<<16;
}
fill_row(temp,dest, val );
}
-static void setup_row_direct(u8 source, u8 dest, u8 linkn){
- setup_row_direct_x(source, source, dest, linkn);
+#if CROSS_BAR_47_56
+static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout)
+{
+ uint32_t val;
+ val = get_row(source, dest);
+ val -= link_connection(source, kickout)<<16;
+ fill_row(source, dest, val);
}
-static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){
- setup_row_direct_x(7, source, dest, linkn);
+static void opt_broadcast_rt_group(const u8 *conn, int num)
+{
+ int i;
+
+ for(i=0; i<num; i+=3) {
+ opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]);
+ }
}
-static uint8_t get_linkn_first(uint8_t byte)
+static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout)
{
- if(byte & 0x02) { byte = 0; }
- else if(byte & 0x04) { byte = 1; }
- else if(byte & 0x08) { byte = 2; }
- return byte;
+ uint32_t val;
+ val = get_row(source, dest);
+ val += link_connection(source, kickout)<<16;
+ fill_row(source, dest, val);
}
-static uint8_t get_linkn_last(uint8_t byte)
+static void opt_broadcast_rt_plus_group(const u8 *conn, int num)
{
- if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; }
- if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; }
- if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; }
- return byte>>4;
+ int i;
+
+ for(i=0; i<num; i+=3) {
+ opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]);
+ }
}
+#endif
-static uint8_t get_linkn_last_count(uint8_t byte)
+static void setup_row_direct(u8 source, u8 dest, u8 linkn)
{
- byte &= 0x3f;
- if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
- if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
- if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
- return byte>>4;
+ setup_row_direct_x(source, source, dest, linkn);
}
-static void setup_temp_row(u8 source, u8 dest)
+static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn)
{
- /* copy val from (source, dest) to (source,7) */
- fill_row(source,7,get_row(source,dest));
+ setup_row_direct_x(7, source, dest, linkn);
}
-static void clear_temp_row(u8 source)
+static void setup_temp_row(u8 source, u8 dest)
{
- fill_row(source, 7, DEFAULT);
+ /* copy value from (source, dest) to (source,7) */
+ fill_row(source, 7, get_row(source, dest));
}
static void setup_remote_node(u8 node)
{
- static const uint8_t pci_reg[] = {
- 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c,
+ static const uint8_t pci_reg[] = {
+ 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c,
0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78,
0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc,
0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8,
print_spew("setup_remote_node: ");
/* copy the default resource map from node 0 */
- for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) {
+ for(i = 0; i < ARRAY_SIZE(pci_reg); i++) {
uint32_t value;
uint8_t reg;
reg = pci_reg[i];
pci_write_config32(NODE_MP(7), reg, value);
}
- print_spew("done\r\n");
+ print_spew("done\n");
}
-#endif /* CONFIG_MAX_CPUS > 1*/
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/
-#if CONFIG_MAX_CPUS > 2
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
#if !CROSS_BAR_47_56
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway)
+static void setup_row_indirect_x(u8 temp, u8 source, u8 dest)
#else
static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff)
#endif
/*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */
uint32_t val_s;
uint32_t val;
-#if !CROSS_BAR_47_56
+#if !CROSS_BAR_47_56
+ u8 gateway;
u8 diff;
+ if(source<dest) {
+ gateway = source + 2;
+ } else {
+ gateway = source - 2;
+ }
#endif
val_s = get_row(temp, source);
val = get_row(temp, gateway);
-
+
val &= 0xffff;
val_s >>= 16;
val_s &= 0xfe;
-
+
#if !CROSS_BAR_47_56
diff = ((source&1)!=(dest &1));
#endif
if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/
val_s -= val & 0xff;
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
uint8_t byte;
/* Some node have two links left
* don't worry we only have (2, (3 as source need to handle
if(source<dest) {
val_s-=link_connection(temp, source-2); /* -down*/
} else {
- val_s-=link_connection(temp, source+2); /* -up*/
+#if CROSS_BAR_47_56
+ #if 0
+ if(source==7) {
+ val_s-=link_connection(temp, 6); // for 7,2 via 5
+ } else if (source==6){
+ val_s-=link_connection(temp, 7); // for 6,3 via 4
+ } else
+ #endif
+ if (source < gateway) { // for 5, 4 via 7
+ val_s-=link_connection(temp, source-2);
+ } else
+#endif
+ val_s-=link_connection(temp, source+2); /* -up*/
}
}
#endif
val &= 0xff;
val |= (val_s<<8);
- }
+ }
if(diff) { /* cross rung?*/
val |= (1<<16);
}
else {
val_s = get_row(temp, source);
- val |= ((val_s>>16) - link_connection(temp, gateway))<<16;
+ val |= ((val_s>>16) - link_connection(temp, gateway))<<16;
}
fill_row(temp, dest, val);
}
#if !CROSS_BAR_47_56
-static void setup_row_indirect(u8 source, u8 dest, u8 gateway)
-{
- setup_row_indirect_x(source, source, dest, gateway);
+static void setup_row_indirect(u8 source, u8 dest)
+{
+ setup_row_indirect_x(source, source, dest);
}
-#else
+#else
static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
{
setup_row_indirect_x(source, source, dest, gateway, diff);
}
-#endif
+#endif
static void setup_row_indirect_group(const u8 *conn, int num)
{
int i;
#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=3) {
- setup_row_indirect(conn[i], conn[i+1],conn[i+2]);
+ for(i=0; i<num; i+=2) {
+ setup_row_indirect(conn[i], conn[i+1]);
#else
for(i=0; i<num; i+=4) {
setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
}
#if !CROSS_BAR_47_56
-static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway)
+static void setup_remote_row_indirect(u8 source, u8 dest)
{
- setup_row_indirect_x(7, source, dest, gateway);
+ setup_row_indirect_x(7, source, dest);
}
#else
static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
int i;
#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=3) {
- setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2]);
+ for(i=0; i<num; i+=2) {
+ setup_remote_row_indirect(conn[i], conn[i+1]);
#else
for(i=0; i<num; i+=4) {
setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
}
}
-#endif /*CONFIG_MAX_CPUS > 2*/
+#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/
static void setup_uniprocessor(void)
{
- print_spew("Enabling UP settings\r\n");
+ print_spew("Enabling UP settings\n");
+#if CONFIG_LOGICAL_CPUS==1
+ unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3;
+ if (tmp>0) return;
+#endif
disable_probes();
}
-struct setup_smp_result {
- int nodes;
- int needs_reset;
-};
-
-#if CONFIG_MAX_CPUS > 2
-static int optimize_connection_group(const u8 *opt_conn, int num) {
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+static int optimize_connection_group(const u8 *opt_conn, int num)
+{
int needs_reset = 0;
int i;
for(i=0; i<num; i+=2) {
needs_reset = optimize_connection(
NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])),
NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) );
- }
+ }
return needs_reset;
-}
+}
#endif
-#if CONFIG_MAX_CPUS > 1
-static struct setup_smp_result setup_smp2(void)
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+static unsigned setup_smp2(void)
{
- struct setup_smp_result result;
+ unsigned nodes;
u8 byte;
uint32_t val;
- result.nodes = 2;
- result.needs_reset = 0;
+ nodes = 2;
setup_row_local(0, 0); /* it will update the broadcast RT*/
-
+
val = get_row(0,0);
byte = (val>>16) & 0xfe;
if(byte<0x2) { /* no coherent connection so get out.*/
- result.nodes = 1;
- return result;
+ nodes = 1;
+ return nodes;
}
/* Setup and check a temporary connection to node 1 */
print_linkn("(0,1) link=", byte);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 1.\r\n");
- result.nodes = 1;
- return result;
- }
+
+ verify_connection(7);
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
setup_row_local(7,1);
setup_remote_row_direct(1, 0, byte);
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
val = get_row(7,1);
byte = (val>>16) & 0xfe;
byte = get_linkn_last_count(byte);
#else
byte = get_linkn_last(byte); /* Max link to Node1*/
#endif
- print_linkn("-->(0,1) link=", byte);
+ print_linkn("\t-->(0,1) link=", byte);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 1.\r\n");
- result.nodes = 1;
- return result;
- }
-
+
+ verify_connection(7);
+
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on node7 to node0*/
- print_linkn("-->(1,0) link=", byte);
+ print_linkn("\t-->(1,0) link=", byte);
setup_row_local(7,1);
setup_remote_row_direct(1, 0, byte);
}
#endif
-
+
setup_remote_node(1); /* Setup the regs on the remote node */
rename_temp_node(1); /* Rename Node 7 to Node 1 */
enable_routing(1); /* Enable routing on Node 1 */
/*don't need and it is done by clear_dead_links */
clear_temp_row(0);
#endif
-
- result.needs_reset = optimize_connection(
- NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)),
- NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) );
- return result;
+ return nodes;
}
-#endif /*CONFIG_MAX_CPUS > 1 */
+#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */
-#if CONFIG_MAX_CPUS > 2
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
-static struct setup_smp_result setup_smp4(int needs_reset)
+static unsigned setup_smp4(void)
{
- struct setup_smp_result result;
+ unsigned nodes;
u8 byte;
uint32_t val;
- result.nodes=4;
- result.needs_reset = needs_reset;
+ nodes=4;
/* Setup and check temporary connection from Node 0 to Node 2 */
val = get_row(0,0);
byte = get_linkn_last_count(byte);
if((byte>>2)==0) { /* We should have two coherent for 4p and above*/
- result.nodes = 2;
- return result;
+ nodes = 2;
+ return nodes;
}
byte &= 3; /* bit [3,2] is count-1*/
- print_linkn("(0,2) link=", byte);
+ print_linkn("(0,2) link=", byte);
setup_row_direct(0, 2, byte); /*(0,2) direct link done*/
- setup_temp_row(0, 2);
-
- if (!check_connection(7) ) {
- print_spew("No connection to Node 2.\r\n");
- result.nodes = 2;
- return result;
- }
/* We found 3 nodes so far. Now setup a temporary
* connection from node 0 to node 3 via node 1
val = get_row(1,1);
byte = ((val>>16) & 0xfe) - link_connection(1,0);
byte = get_linkn_first(byte);
- print_linkn("(1,3) link=", byte);
+ print_linkn("(1,3) link=", byte);
setup_row_direct(1,3,byte); /* (1, 3) direct link done*/
- setup_temp_row(1,3); /* temp. link between nodes 1 and 3 */
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 3.\r\n");
- result.nodes = 2;
- return result;
- }
/* We found 4 nodes so far. Now setup all nodes for 4p */
+ // We need to make sure 0,2 and 1,3 link is set already
#if !CROSS_BAR_47_56
static const u8 conn4_1[] = {
- 0,3,2,
- 1,2,3,
- };
+ 0,3,
+ 1,2,
+ };
#else
static const u8 conn4_1[] = {
0,3,2,1,
};
#endif
- setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
+ setup_row_indirect_group(conn4_1, ARRAY_SIZE(conn4_1));
setup_temp_row(0,2);
-
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
- print_linkn("(2,0) link=", byte);
+ print_linkn("(2,0) link=", byte);
setup_row_local(7,2);
- setup_remote_row_direct(2, 0, byte);
+ setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */
setup_remote_node(2); /* Setup the regs on the remote node */
-#if !CROSS_BAR_47_56
- static const u8 conn4_2[] = {
- 2,1,0,
- };
-#else
- static const u8 conn4_2[] = {
- 2,1,0,1,
- };
-#endif
- setup_remote_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
rename_temp_node(2); /* Rename Node 7 to Node 2 */
enable_routing(2); /* Enable routing on Node 2 */
setup_temp_row(0,1);
setup_temp_row(1,3);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
- print_linkn("(3,1) link=", byte);
+ print_linkn("(3,1) link=", byte);
setup_row_local(7,3);
- setup_remote_row_direct(3, 1, byte);
+ setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */
setup_remote_node(3); /* Setup the regs on the remote node */
-#if !CROSS_BAR_47_56
- static const u8 conn4_3[] = {
- 3,0,1,
- };
-#else
- static const u8 conn4_3[] = {
- 3,0,1,1,
- };
-#endif
- setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
-
/* We need to init link between 2, and 3 direct link */
val = get_row(2,2);
byte = ((val>>16) & 0xfe) - link_connection(2,0);
byte = get_linkn_last_count(byte);
print_linkn("(2,3) link=", byte & 3);
-
+
setup_row_direct(2,3, byte & 0x3);
setup_temp_row(0,2);
setup_temp_row(2,3);
- check_connection(7); /* to 3*/
+ verify_connection(7); /* to 3*/
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
/* We need to find out which link is to node3 */
-
if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/
val = get_row(7,3);
- if((val>>16) == 1) { /* that link is to node4, because via node3 it has been set, recompute it*/
+ if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/
val = get_row(2,2);
byte = ((val>>16) & 0xfe) - link_connection(2,0);
byte = get_linkn_first(byte);
- print_linkn("-->(2,3) link=", byte);
+ print_linkn("\t-->(2,3) link=", byte);
setup_row_direct(2,3,byte);
setup_temp_row(2,3);
- check_connection(7); /* to 3*/
+ verify_connection(7); /* to 3*/
}
- }
+ }
#endif
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 2*/
- print_linkn("(3,2) link=", byte);
+ print_linkn("(3,2) link=", byte);
setup_remote_row_direct(3,2, byte);
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+ /* set link from 3 to 5 before enable it*/
+ val = get_row(7,3);
+ byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(3,5) link=", byte);
+ setup_remote_row_direct(3, 5, byte);
+ }
+
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(2,4) link=", byte);
+ setup_row_direct(2, 4, byte);
+ }
+#endif
+
+ //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3
+#if !CROSS_BAR_47_56
+ static const u8 conn4_3[] = {
+ 3,0,
+ };
+#else
+ static const u8 conn4_3[] = {
+ 3,0,1,1,
+ };
+#endif
+ setup_remote_row_indirect_group(conn4_3, ARRAY_SIZE(conn4_3));
+
/* ready to enable RT for Node 3 */
rename_temp_node(3);
enable_routing(3); /* enable routing on node 3 (temp.) */
+ // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2
+#if !CROSS_BAR_47_56
+ static const u8 conn4_2[] = {
+ 2,1,
+ };
+#else
+ static const u8 conn4_2[] = {
+ 2,1,0,1,
+ };
+#endif
+ setup_row_indirect_group(conn4_2, ARRAY_SIZE(conn4_2));
+
#if 0
/*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */
/* it will be done by clear_dead_links */
clear_temp_row(1);
#endif
- /* optimize physical connections - by LYH */
- static const u8 opt_conn4[] = {
- 0,2,
- 1,3,
- 2,3,
- };
-
- result.needs_reset = optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0]));
-
- return result;
+ return nodes;
}
-#endif /* CONFIG_MAX_CPUS > 2 */
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */
-#if CONFIG_MAX_CPUS > 4
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
-static struct setup_smp_result setup_smp6(int needs_reset)
+static unsigned setup_smp6(void)
{
- struct setup_smp_result result;
+ unsigned nodes;
u8 byte;
uint32_t val;
- result.nodes=6;
- result.needs_reset = needs_reset;
+ nodes=6;
- /* Setup and check temporary connection from Node 0 to Node 4 via 2 */
+ /* Setup and check temporary connection from Node 0 to Node 4 through 2*/
val = get_row(2,2);
byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
byte = get_linkn_last_count(byte);
- if((byte>>2)==0) { /* We should have two coherent link on node 2 for 6p and above*/
- result.nodes = 4;
- return result;
- }
- byte &= 3; /* bit [3,2] is count-2*/
- print_linkn("(2,4) link=", byte);
- setup_row_direct(2, 4, byte);
-
- /* Setup and check temporary connection from Node 0 to Node 4 through 2*/
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
+ if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/
+ nodes = 4;
+ return nodes;
}
- if (!check_connection(7) ) {
- print_spew("No connection to Node 4.\r\n");
- result.nodes = 4;
- return result;
- }
-
/* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/
+ /* set link from 3 to 5 before enable it*/
val = get_row(3,3);
byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
byte = get_linkn_last_count(byte);
- if((byte>>2)==0) { /* We should have two coherent links on node 3 for 6p and above*/
- result.nodes = 4;
- return result;
+ if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/
+ nodes = 4;
+ return nodes;
}
- byte &= 3; /*bit [3,2] is count-2*/
- print_linkn("(3,5) link=", byte);
- setup_row_direct(3, 5, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 5.\r\n");
- result.nodes = 4;
- return result;
- }
-
/* We found 6 nodes so far. Now setup all nodes for 6p */
-#warning "FIXME we need to find out the correct gateway for 6p"
+#warning "FIXME we need to find out the correct gateway for 6p"
static const u8 conn6_1[] = {
#if !CROSS_BAR_47_56
- 0, 4, 2,
- 0, 5, 1,
- 1, 4, 3,
- 1, 5, 3,
- 2, 5, 3,
- 3, 4, 5,
+ 0, 4,
+ 0, 5,
+ 1, 4,
+ 1, 5,
+ 2, 5,
+ 3, 4,
#else
0, 4, 2, 0,
- 0, 5, 1, 1,
+ 0, 5, 2, 1,
1, 4, 3, 1,
1, 5, 3, 0,
2, 5, 3, 0,
3, 4, 2, 0,
#endif
- };
+ };
+
+ setup_row_indirect_group(conn6_1, ARRAY_SIZE(conn6_1));
- setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0]));
-
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte,byte+2);
}
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
- print_linkn("(4,2) link=", byte);
-
+ print_linkn("(4,2) link=", byte);
+
setup_row_local(7,4);
setup_remote_row_direct(4, 2, byte);
setup_remote_node(4); /* Setup the regs on the remote node */
+
/* Set indirect connection to 0, to 3 */
+ //we only need to set 4,0 here
static const u8 conn6_2[] = {
#if !CROSS_BAR_47_56
- 4, 0, 2,
- 4, 1, 2,
- 4, 3, 2,
+ 4, 0,
#else
4, 0, 2, 0,
- 4, 1, 2, 0,
- 4, 3, 2, 0,
- 4, 5, 2, 0,
#endif
- };
-
- setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0]));
-
+ };
+
+ setup_remote_row_indirect_group(conn6_2, ARRAY_SIZE(conn6_2));
+
rename_temp_node(4);
enable_routing(4);
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte+1,byte+3);
}
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
- print_linkn("(5,3) link=", byte);
+ print_linkn("(5,3) link=", byte);
setup_row_local(7,5);
setup_remote_row_direct(5, 3, byte);
setup_remote_node(5); /* Setup the regs on the remote node */
-
+
#if !CROSS_BAR_47_56
/* We need to init link between 4, and 5 direct link */
val = get_row(4,4);
byte = ((val>>16) & 0xfe) - link_connection(4,2);
byte = get_linkn_last_count(byte);
print_linkn("(4,5) link=", byte & 3);
-
+
setup_row_direct(4,5, byte & 0x3);
setup_temp_row(0,2);
setup_temp_row(2,4);
setup_temp_row(4,5);
- check_connection(7); /* to 5*/
+ verify_connection(7); /* to 5*/
-#if CONFIG_MAX_CPUS > 6
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
/* We need to find out which link is to node5 */
-
+
if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/
val = get_row(7,5);
if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/
val = get_row(4,4);
byte = ((val>>16) & 0xfe) - link_connection(4,2);
byte = get_linkn_first(byte);
- print_linkn("-->(4,5) link=", byte);
+ print_linkn("\t-->(4,5) link=", byte);
setup_row_direct(4,5,byte);
setup_temp_row(4,5);
- check_connection(7); /* to 5*/
+ verify_connection(7); /* to 5*/
}
- }
+ }
#endif
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
- print_linkn("(5,4) link=", byte);
+ print_linkn("(5,4) link=", byte);
setup_remote_row_direct(5,4, byte);
-#endif
-
+
+ //init 5, 7 here
+ val = get_row(7,5);
+ byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(5,7) link=", byte);
+ setup_remote_row_direct(5, 7, byte);
+ }
+
+ //init 4,6 here
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(4,6) link=", byte);
+ setup_row_direct(4, 6, byte);
+ }
+
+#endif
+
+ //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0
/* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
static const u8 conn6_3[] = {
#if !CROSS_BAR_47_56
- 5, 0, 4,
- 5, 2, 4,
- 5, 1, 3,
+ 5, 0,
#else
5, 0, 3, 0,
- 5, 2, 3, 0,
- 5, 1, 3, 0,
- 5, 4, 3, 0,
#endif
- };
-
- setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0]));
+ };
+
+ setup_remote_row_indirect_group(conn6_3, ARRAY_SIZE(conn6_3));
/* ready to enable RT for 5 */
rename_temp_node(5);
enable_routing(5); /* enable routing on node 5 (temp.) */
+ static const u8 conn6_4[] = {
+#if !CROSS_BAR_47_56
+ 4, 1,
+ 4, 3,
+
+ 5, 2,
+ 5, 1,
+
+#else
+ 4, 1, 2, 0,
+ 4, 3, 2, 0,
+ 4, 5, 2, 0,
+
+ 5, 2, 3, 0,
+ 5, 1, 3, 0,
+ 5, 4, 3, 0,
+
+#endif
+ };
+
+ setup_row_indirect_group(conn6_4, ARRAY_SIZE(conn6_4));
+
#if 0
/* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5)
- * It will be done by clear_dead_links
+ * It will be done by clear_dead_links
*/
for(byte=0; byte<4; byte++) {
clear_temp_row(byte);
}
#endif
- /* optimize physical connections - by LYH */
- static const uint8_t opt_conn6[] ={
- 2, 4,
- 3, 5,
-#if !CROSS_BAR_47_56
- 4, 5,
-#endif
- };
- result.needs_reset = optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0]));
-
- return result;
+ return nodes;
}
-#endif /* CONFIG_MAX_CPUS > 4 */
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */
-#if CONFIG_MAX_CPUS > 6
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
-static struct setup_smp_result setup_smp8(int needs_reset)
+static unsigned setup_smp8(void)
{
- struct setup_smp_result result;
+ unsigned nodes;
u8 byte;
uint32_t val;
- result.nodes=8;
- result.needs_reset = needs_reset;
+ nodes=8;
/* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */
val = get_row(4,4);
-#if !CROSS_BAR_47_56
- byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
-#else
+#if CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(4,2);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte); /* Max link to 6*/
+ if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
+ nodes = 6;
+ return nodes;
+ }
#endif
-#if TRY_HIGH_FIRST == 1
+#if CROSS_BAR_47_56
byte = get_linkn_last_count(byte); /* Max link to 6*/
- if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
- result.nodes = 6;
- return result;
+ if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/
+ nodes = 6;
+ return nodes;
}
- byte &= 3; /* bit [3,2] is count-1 or 2*/
-#else
+#if TRY_HIGH_FIRST == 1
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
byte = get_linkn_first(byte); /*Min link to 6*/
+#else
+ byte &= 3; /* bit [3,2] is count-1 or 2*/
#endif
print_linkn("(4,6) link=", byte);
setup_row_direct(4, 6, byte);
+#endif
- /* Setup and check temporary connection from Node 0 to Node 6 through 2, and 4*/
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
-
- if (!check_connection(7) ) {
- print_spew("No connection to Node 6.\r\n");
- result.nodes = 6;
- return result;
- }
#if !CROSS_BAR_47_56
/* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/
val = get_row(5,5);
byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
- byte = get_linkn_first(byte);
- print_linkn("(5,7) link=", byte);
- setup_row_direct(5, 7, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-#else
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
- byte = get_linkn_first(byte);
- print_linkn("(4,7) link=", byte);
- setup_row_direct(4, 7, byte);
-
- /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/
+ nodes = 6;
+ return nodes;
}
- setup_temp_row(4, 7);
-
#endif
- if (!check_connection(7)) {
- print_spew("No connection to Node 7.\r\n");
- result.nodes = 6;
- return result;
- }
-
-
/* We found 8 nodes so far. Now setup all nodes for 8p */
static const u8 conn8_1[] = {
#if !CROSS_BAR_47_56
- 0, 6, 2,
- /*0, 7, 1,*/
- 1, 6, 3,
- /*1, 7, 3,*/
- 2, 6, 4,
- /*2, 7, 3,*/
- 3, 6, 5,
- /*3, 7, 5,*/
- /*4, 7, 5,*/
+ 0, 6,
+ /*0, 7,*/
+ 1, 6,
+ /*1, 7,*/
+ 2, 6,
+ /*2, 7,*/
+ 3, 6,
+ /*3, 7,*/
+ /*4, 7,*/
+ 5, 6,
#else
0, 6, 2, 0,
/*0, 7, 2, 0,*/
/*1, 7, 3, 0,*/
2, 6, 4, 0,
/*2, 7, 4, 0,*/
- 3, 6, 5, 0,
+ 3, 6, 5, 1,
/*3, 7, 5, 0,*/
#endif
};
- setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0]));
+ setup_row_indirect_group(conn8_1,ARRAY_SIZE(conn8_1));
for(byte=0; byte<6; byte+=2) {
setup_temp_row(byte,byte+2);
}
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
print_linkn("(6,4) link=", byte);
-
+
setup_row_local(7,6);
setup_remote_row_direct(6, 4, byte);
setup_remote_node(6); /* Setup the regs on the remote node */
/* Set indirect connection to 0, to 3 */
-#warning "FIXME we need to find out the correct gateway for 8p"
+#warning "FIXME we need to find out the correct gateway for 8p"
static const u8 conn8_2[] = {
#if !CROSS_BAR_47_56
- 6, 0, 4,
- 6, 1, 4,
- 6, 2, 4,
- 6, 3, 4,
- 6, 5, 4,
+ 6, 0,
#else
6, 0, 4, 0,
- /*6, 1, 5, 0,*/
- 6, 2, 4, 0,
- /*6, 3, 5, 0,*/
#endif
};
- setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0]));
-
+ setup_remote_row_indirect_group(conn8_2, ARRAY_SIZE(conn8_2));
+
+#if CROSS_BAR_47_56
+ //init 5, 6 here
+ /* here init 5, 6 */
+ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte);
+#else
+ byte = get_linkn_last(byte);
+#endif
+ print_linkn("(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+ setup_temp_row(5,6);
+
+ verify_connection(7);
+
+ val = get_row(7,6); // to chect it if it is node6 before renaming
+ if( (val>>16) == 1) { // it is real node 7 so swap it
+ /* We need to recompute link to 6 */
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte);
+#else
+ byte = get_linkn_last(byte);
+#endif
+ print_linkn("\t-->(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+#if 0
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+#endif
+ setup_temp_row(5,6);
+
+ verify_connection(7);
+ }
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
+ print_linkn("(6,5) link=", byte);
+ setup_remote_row_direct(6, 5, byte);
+ /*Till now 56, 65 done */
+#endif
+
rename_temp_node(6);
enable_routing(6);
setup_temp_row(byte+1,byte+3);
}
+ verify_connection(7);
+
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
- print_linkn("(7,5) link=", byte);
+ print_linkn("(7,5) link=", byte);
setup_row_local(7,7);
setup_remote_row_direct(7, 5, byte);
#else
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
+ byte = get_linkn_first(byte);
+ print_linkn("(4,7) link=", byte);
+ setup_row_direct(4, 7, byte);
+
+ /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte,byte+2);
}
- setup_temp_row(4,7);
+
+ verify_connection(7);
+
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
- print_linkn("(7,4) link=", byte);
+ print_linkn("(7,4) link=", byte);
setup_row_local(7,7);
setup_remote_row_direct(7, 4, byte);
/* till now 4-7, 7-4 done. */
/* here init 5, 7 */
/* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
- byte = get_linkn_last(byte);
- print_linkn("(5,7) link=", byte);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6);
+ byte = get_linkn_first(byte);
+ print_linkn("(5,7) link=", byte);
setup_row_direct(5, 7, byte);
-
+
setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
}
- if (!check_connection(7)) {
- /* We need to recompute link to 7 */
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
- byte = get_linkn_first(byte);
+ verify_connection(7);
- print_linkn("-->(5,7) link=", byte);
- setup_row_direct(5, 7, byte);
-#if 0
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-#else
- setup_temp_row(5,7);
-#endif
- check_connection(7);
- }
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
print_linkn("(7,5) link=", byte);
setup_remote_row_direct(7, 5, byte);
/*Till now 57, 75 done */
-
- /* init init 5, 6 */
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,7);
- byte = get_linkn_first(byte);
- print_linkn("(5,6) link=", byte);
- setup_row_direct(5, 6, byte);
-
- /* init 6,7 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4);
- byte = get_linkn_last(byte);
- print_linkn("(6,7) link=", byte);
- setup_row_direct(6, 7, byte);
-
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
- setup_temp_row(6,7);
-
- if (!check_connection(7)) {
- /* We need to recompute link to 7 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4);
- byte = get_linkn_first(byte);
- print_linkn("-->(6,7) link=", byte);
-
- setup_row_direct(6, 7, byte);
-#if 0
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2); /* temp. link between nodes 0 and 2 */
- }
-#endif
- setup_temp_row(6,7);
- check_connection(7);
- }
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 6*/
- print_linkn("(7,6) link=", byte);
-
- setup_remote_row_direct(7, 6, byte);
- /* Till now 67, 76 done*/
-
- /* init 6,5 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,7);
- byte = get_linkn_first(byte);
- print_linkn("(6,5) link=", byte);
- setup_row_direct(6, 5, byte);
#endif
-#if !CROSS_BAR_47_56
/* We need to init link between 6, and 7 direct link */
val = get_row(6,6);
+#if !CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(6,4);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5);
+#endif
byte = get_linkn_first(byte);
print_linkn("(6,7) link=", byte);
setup_row_direct(6,7, byte);
val = get_row(7,7);
+#if !CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(7,5);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4);
+#endif
byte = get_linkn_first(byte);
print_linkn("(7,6) link=", byte);
setup_row_direct(7,6, byte);
-#endif
/* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
static const u8 conn8_3[] = {
#if !CROSS_BAR_47_56
- 0, 7, 1, /* restore it*/
- 1, 7, 3,
- 2, 7, 3,
- 3, 7, 5,
- 4, 7, 5,
-
- 7, 0, 6,
- 7, 1, 5,
- 7, 2, 6,
- 7, 3, 5,
- 7, 4, 6,
+ 0, 7, /* restore it*/
+ 1, 7,
+ 2, 7,
+ 3, 7,
+ 4, 7,
+
+ 6, 1,
+ 6, 2,
+ 6, 3,
+ 6, 5,
+
+ 7, 0,
+ 7, 1,
+ 7, 2,
+ 7, 3,
+ 7, 4,
#else
+
+
+ 4, 5, 6, 1,
+ 5, 4, 7, 1,
+
+ 6, 1, 5, 0, // or 4, 1
+ 6, 2, 4, 0,
+ 6, 3, 5, 0, // or 4, 1
+
+ 7, 0, 4, 0, // or 5, 1
+ 7, 1, 5, 0,
+ 7, 2, 4, 0, // or 5, 1
+ 7, 3, 5, 0,
+
0, 7, 2, 0, /* restore it*/
1, 7, 3, 0,
- 2, 7, 4, 0,
+ 2, 7, 4, 1,
3, 7, 5, 0,
-
- 6, 1, 5, 0, /*???*/
- 6, 3, 5, 0, /*???*/
-
- 7, 0, 4, 0,
- 7, 1, 5, 0,
- 7, 2, 4, 0,
- 7, 3, 5, 0,
- 4, 5, 7, 0,
- 5, 4, 6, 0,
+
+ 2, 5, 4, 1, /* reset it */
+ 3, 4, 5, 1,
+
+ 4, 1, 2, 1, /* reset it */
+ 4, 3, 2, 1,
+
+ 5, 2, 3, 1, /* reset it */
+ 5, 0, 3, 1,
+
#endif
};
- setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0]));
-
-/* ready to enable RT for Node 7 */
- enable_routing(7); /* enable routing on node 7 (temp.) */
-
+ setup_row_indirect_group(conn8_3, ARRAY_SIZE(conn8_3));
- static const uint8_t opt_conn8[] ={
- 4, 6,
#if CROSS_BAR_47_56
- 4, 7,
- 5, 6,
-#endif
- 5, 7,
- 6, 7,
+ /* for 47, 56, 57, 75, 46, 64 we need to substract another link to
+ 6, 7, 6, 6, 7, 7 */
+ static const u8 conn8_4[] = {
+//direct
+ 4, 7, 6,
+ 5, 6, 7,
+ 5, 7, 6,
+ 7, 5, 6,
+ 4, 6, 7,
+ 6, 4, 7,
+
+//in direct
+ 0, 6, 1,
+ 0, 7, 1,
+
+ 1, 6, 0,
+ 1, 7, 0,
+
+ 2, 6, 3,
+// 2, 7, 3, +
+
+// 3, 6, 1, +
+ 3, 7, 2,
+
+ 6, 0, 7,
+ 6, 1, 7, // needed for via 5
+ 6, 1, 4, // ???
+ 6, 2, 7,
+ 6, 3, 7, // needed for via 5
+ 6, 3, 4, //???
+ 7, 0, 6, // needed for via 4
+ 7, 0, 5, //???
+ 7, 1, 6,
+ 7, 2, 6, // needed for via 4
+ 7, 2, 5, //???
+ 7, 3, 6,
};
- /* optimize physical connections - by LYH */
- result.needs_reset = optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0]));
- return result;
+ opt_broadcast_rt_group(conn8_4, ARRAY_SIZE(conn8_4));
+
+ static const u8 conn8_5[] = {
+ 2, 7, 0,
+
+ 3, 6, 1,
+ };
+
+ opt_broadcast_rt_plus_group(conn8_5, ARRAY_SIZE(conn8_5));
+#endif
+
+
+
+/* ready to enable RT for Node 7 */
+ enable_routing(7); /* enable routing on node 7 (temp.) */
+
+ return nodes;
}
-#endif /* CONFIG_MAX_CPUS > 6 */
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */
-#if CONFIG_MAX_CPUS > 1
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
-static struct setup_smp_result setup_smp(void)
+static unsigned setup_smp(void)
{
- struct setup_smp_result result;
+ unsigned nodes;
- print_spew("Enabling SMP settings\r\n");
-
- result = setup_smp2();
-#if CONFIG_MAX_CPUS > 2
- if(result.nodes == 2 )
- result = setup_smp4(result.needs_reset);
+ print_spew("Enabling SMP settings\n");
+
+ nodes = setup_smp2();
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ if(nodes == 2)
+ nodes = setup_smp4();
#endif
-
-#if CONFIG_MAX_CPUS > 4
- if(result.nodes == 4)
- result = setup_smp6(result.needs_reset);
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+ if(nodes == 4)
+ nodes = setup_smp6();
#endif
-#if CONFIG_MAX_CPUS > 6
- if(result.nodes == 6)
- result = setup_smp8(result.needs_reset);
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ if(nodes == 6)
+ nodes = setup_smp8();
#endif
- print_debug_hex8(result.nodes);
- print_debug(" nodes initialized.\r\n");
-
- return result;
+ printk(BIOS_DEBUG, "%02x nodes initialized.\n", nodes);
+ return nodes;
}
static unsigned verify_mp_capabilities(unsigned nodes)
{
unsigned node, mask;
-
+
mask = 0x06; /* BigMPCap */
for (node=0; node<nodes; node++) {
mask &= pci_read_config32(NODE_MC(node), 0xe8);
}
-
+
switch(mask) {
-#if CONFIG_MAX_CPUS > 2
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
case 0x02: /* MPCap */
if(nodes > 2) {
- print_err("Going back to DP\r\n");
+ print_err("Going back to DP\n");
return 2;
}
break;
#endif
case 0x00: /* Non SMP */
if(nodes >1 ) {
- print_err("Going back to UP\r\n");
+ print_err("Going back to UP\n");
return 1;
}
break;
}
-
+
return nodes;
}
{
int last_row;
int node, row;
-#if CONFIG_MAX_CPUS > 6
+#if CONFIG_MAX_PHYSICAL_CPUS == 8
if(nodes==8) return;/* don't touch (7,7)*/
#endif
last_row = nodes;
fill_row(node, row, DEFAULT);
}
}
-
+
/* Update the local row */
for( node=0; node<nodes; node++) {
uint32_t val = 0;
for(row =0; row<nodes; row++) {
val |= get_row(node, row);
}
- fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101);
+ fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101);
}
}
-#endif /* CONFIG_MAX_CPUS > 1 */
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
+
+#if CONFIG_LOGICAL_CPUS==1
+static unsigned verify_dualcore(unsigned nodes)
+{
+ unsigned node, totalcpus, tmp;
+
+ totalcpus = 0;
+ for (node=0; node<nodes; node++) {
+ tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ;
+ totalcpus += (tmp + 1);
+ }
+
+ return totalcpus;
+
+}
+#endif
static void coherent_ht_finalize(unsigned nodes)
{
unsigned node;
+#if CONFIG_K8_REV_F_SUPPORT == 0
int rev_a0;
-
+#endif
+#if CONFIG_LOGICAL_CPUS==1
+ unsigned total_cpus;
+
+ if (read_option(multi_core, 0) == 0) { /* multi_core */
+ total_cpus = verify_dualcore(nodes);
+ }
+ else {
+ total_cpus = nodes;
+ }
+#endif
+
/* set up cpu count and node count and enable Limit
- * Config Space Range for all available CPUs.
- * Also clear non coherent hypertransport bus range
- * registers on Hammer A0 revision.
- */
+ * Config Space Range for all available CPUs.
+ * Also clear non coherent hypertransport bus range
+ * registers on Hammer A0 revision.
+ */
- print_spew("coherent_ht_finalize\r\n");
+ print_spew("coherent_ht_finalize\n");
+#if CONFIG_K8_REV_F_SUPPORT == 0
rev_a0 = is_cpu_rev_a0();
+#endif
for (node = 0; node < nodes; node++) {
device_t dev;
uint32_t val;
/* Set the Total CPU and Node count in the system */
val = pci_read_config32(dev, 0x60);
val &= (~0x000F0070);
+#if CONFIG_LOGICAL_CPUS==1
+ val |= ((total_cpus-1)<<16)|((nodes-1)<<4);
+#else
val |= ((nodes-1)<<16)|((nodes-1)<<4);
+#endif
pci_write_config32(dev, 0x60, val);
/* Only respond to real cpu pci configuration cycles
- * and optimize the HT settings
- */
- val=pci_read_config32(dev, 0x68);
+ * and optimize the HT settings
+ */
+ val=pci_read_config32(dev, HT_TRANSACTION_CONTROL);
val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) |
(HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) |
(HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT));
- val |= HTTC_LIMIT_CLDT_CFG |
+ val |= HTTC_LIMIT_CLDT_CFG |
(HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) |
- HTTC_RSP_PASS_PW |
(3 << HTTC_MED_PRI_BYP_CNT_SHIFT) |
(3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
- pci_write_config32(dev, 0x68, val);
+ pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
+#if CONFIG_K8_REV_F_SUPPORT == 0
if (rev_a0) {
- print_spew("shit it is an old cup\n");
pci_write_config32(dev, 0x94, 0);
pci_write_config32(dev, 0xb4, 0);
pci_write_config32(dev, 0xd4, 0);
}
+#endif
}
- print_spew("done\r\n");
+ print_spew("done\n");
}
-static int apply_cpu_errata_fixes(unsigned nodes, int needs_reset)
+static int apply_cpu_errata_fixes(unsigned nodes)
{
unsigned node;
+ int needs_reset = 0;
for(node = 0; node < nodes; node++) {
device_t dev;
uint32_t cmd;
dev = NODE_MC(node);
+#if CONFIG_K8_REV_F_SUPPORT == 0
if (is_cpu_pre_c0()) {
/* Errata 66
- * Limit the number of downstream posted requests to 1
- */
+ * Limit the number of downstream posted requests to 1
+ */
cmd = pci_read_config32(dev, 0x70);
if ((cmd & (3 << 0)) != 2) {
cmd &= ~(3<<0);
}
}
- else if(is_cpu_pre_d0()) { // d0 later don't need it
+ else if (is_cpu_pre_d0()) { // d0 later don't need it
uint32_t cmd_ref;
- /* Errata 98
- * Set Clk Ramp Hystersis to 7
- * Clock Power/Timing Low
- */
+ /* Errata 98
+ * Set Clk Ramp Hystersis to 7
+ * Clock Power/Timing Low
+ */
cmd_ref = 0x04e20707; /* Registered */
cmd = pci_read_config32(dev, 0xd4);
if(cmd != cmd_ref) {
needs_reset = 1; /* Needed? */
}
}
+#endif
+
+
+#if CONFIG_K8_REV_F_SUPPORT == 0
+ /* I can't touch this msr on early buggy cpus, and cannot apply either 169 or 131 */
+ if (!is_cpu_pre_b3())
+#endif
+ {
+ /* Errata 169 */
+ /* We also need to set some bits in NB_CFG_MSR, which is handled in src/cpu/amd/model_fxx/ */
+ dev = NODE_HT(node);
+ cmd = pci_read_config32(dev, 0x68);
+ cmd &= ~(1 << 22);
+ cmd |= (1 << 21);
+ pci_write_config32(dev, 0x68, cmd);
+ }
}
return needs_reset;
}
-static int optimize_link_read_pointers(unsigned nodes, int needs_reset)
+static int optimize_link_read_pointers(unsigned nodes)
{
unsigned node;
+ int needs_reset = 0;
for(node = 0; node < nodes; node++) {
device_t f0_dev, f3_dev;
uint32_t cmd_ref, cmd;
/* This works on an Athlon64 because unimplemented links return 0 */
reg = 0x98 + (link * 0x20);
link_type = pci_read_config32(f0_dev, reg);
- if ((link_type & 7) == 3) { /* only handle coherent link here*/
+ /* Only handle coherent links */
+ if ((link_type & (LinkConnected | InitComplete|NonCoherent)) ==
+ (LinkConnected|InitComplete))
+ {
cmd &= ~(0xff << (link *8));
cmd |= 0x25 << (link *8);
}
return needs_reset;
}
+static inline unsigned get_nodes(void)
+{
+ return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
+}
+
+static int optimize_link_coherent_ht(void)
+{
+ int needs_reset = 0;
+
+ unsigned nodes;
+
+ nodes = get_nodes();
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ if(nodes>1) {
+ needs_reset |= optimize_connection(
+ NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)),
+ NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) );
+ }
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ if(nodes>2) {
+ /* optimize physical connections - by LYH */
+ static const u8 opt_conn4[] = {
+ 0,2,
+ 1,3,
+ 2,3,
+ };
+ needs_reset |= optimize_connection_group(opt_conn4, ARRAY_SIZE(opt_conn4));
+ }
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+ if(nodes>4) {
+ static const uint8_t opt_conn6[] ={
+ 2, 4,
+ 3, 5,
+ #if !CROSS_BAR_47_56
+ 4, 5,
+ #endif
+ };
+ needs_reset |= optimize_connection_group(opt_conn6, ARRAY_SIZE(opt_conn6));
+ }
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ if(nodes>6) {
+ static const uint8_t opt_conn8[] ={
+ 4, 6,
+ #if CROSS_BAR_47_56
+ 4, 7,
+ 5, 6,
+ #endif
+ 5, 7,
+ 6, 7,
+ };
+ needs_reset |= optimize_connection_group(opt_conn8, ARRAY_SIZE(opt_conn8));
+ }
+#endif
+
+#endif
+
+ needs_reset |= apply_cpu_errata_fixes(nodes);
+ needs_reset |= optimize_link_read_pointers(nodes);
+
+ return needs_reset;
+}
+
+#if CONFIG_RAMINIT_SYSINFO
+static void setup_coherent_ht_domain(void)
+#else
static int setup_coherent_ht_domain(void)
+#endif
{
- struct setup_smp_result result;
+ unsigned nodes;
+ nodes = 1;
enable_bsp_routing();
-#if CONFIG_MAX_CPUS > 1
- result = setup_smp();
- result.nodes = verify_mp_capabilities(result.nodes);
- clear_dead_routes(result.nodes);
-#else
- result.nodes = 1;
- result.needs_reset = 0;
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ nodes = setup_smp();
+ nodes = verify_mp_capabilities(nodes);
+ clear_dead_routes(nodes);
#endif
- if (result.nodes == 1) {
+ if (nodes == 1) {
setup_uniprocessor();
- }
- coherent_ht_finalize(result.nodes);
- result.needs_reset = apply_cpu_errata_fixes(result.nodes, result.needs_reset);
- result.needs_reset = optimize_link_read_pointers(result.nodes, result.needs_reset);
- return result.needs_reset;
+ }
+ coherent_ht_finalize(nodes);
+
+#if !CONFIG_RAMINIT_SYSINFO
+ return optimize_link_coherent_ht();
+#endif
}
+