Simplify a few code chunks, fix whitespace and indentation.

[coreboot.git] / src / mainboard / tyan / s2882 / romstage.c

diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index cfcc7a9ae5b7cb62eb45ade4f26cfd44bdeef7d9..9ecf09bd3e3e17fc0f8ee2deba2e2e34a47b2bf8 100644 (file)
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -29,28 +29,23 @@
 
 static void memreset_setup(void)
 {
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+   if (is_cpu_pre_c0())
+        outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
+   else
+        outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
+   outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
 }
 
 static void memreset(int controllers, const struct mem_controller *ctrl)
 {
    if (is_cpu_pre_c0()) {
         udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+        outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
         udelay(90);
    }
 }
 
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-       /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static inline int spd_read_byte(unsigned device, unsigned address)
 {
@@ -97,15 +92,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
         if (!cpu_init_detectedx && boot_cpu()) {
                /* Nothing special needs to be done to find bus 0 */
                /* Allow the HT devices to be found */
-
                enumerate_ht_chain();
-
                amd8111_enable_rom();
         }
 
-        if (bist == 0) {
+        if (bist == 0)
                init_cpus(cpu_init_detectedx);
-        }
 
        w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
         uart_init();