remove trailing whitespace

[coreboot.git] / src / mainboard / siemens / sitemp_g1p1 / romstage.c

diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c
index 09aa1d7f459b4c77e3ea7b7381342cafe40650b0..b570d4581db1477cfdeeea875b8c594bcc172253 100644 (file)
--- a/src/mainboard/siemens/sitemp_g1p1/romstage.c
+++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c
@@ -18,7 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
- 
+
 #define RC0 (6<<8)
 #define RC1 (7<<8)
 
@@ -177,7 +177,7 @@ static inline void check_cmos( void ) {
                        outb(0x0a,0x72);
                        i = inb(0x73);
                        i &= ~(1 << 4);
-                       outb(i,0x73);                                   
+                       outb(i,0x73);
 
                        for (i = 14; i < 128; i++) {
 #if DUMP_CMOS_RAM
@@ -198,7 +198,7 @@ static inline void check_cmos( void ) {
                        /* Now reboot to run with default cmos. */
                        outb(0x06, 0xcf9);
                        for (;;) asm("hlt"); /* Wait for reset! */
-               } 
+               }
        }
 
        // update altcentury
@@ -221,7 +221,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        msr_t msr;
        struct cpuid_result cpuid1;
        struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-                       
+
        if (!cpu_init_detectedx && boot_cpu()) {
                /* Nothing special needs to be done to find bus 0 */
                /* Allow the HT devices to be found */
@@ -237,19 +237,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
        enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge
        sb600_lpc_init();
-#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0)     
-       check_cmos();  // rebooting in case of corrupted cmos !!!!!     
-#endif 
+#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0)
+       check_cmos();  // rebooting in case of corrupted cmos !!!!!
+#endif
        /* it8712f_enable_serial does not use its 1st parameter. */
        it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
-       it8712f_kill_watchdog(); 
+       it8712f_kill_watchdog();
 
        console_init();
 #if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1)
-       check_cmos();  // rebooting in case of corrupted cmos !!!!!             
+       check_cmos();  // rebooting in case of corrupted cmos !!!!!
 #endif
        post_code(0x03);
-       
+
        /* Halt if there was a built in self test failure */
        report_bist_failure(bist);
        __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid);
@@ -270,9 +270,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        /* run _early_setup before soft-reset. */
        rs690_early_setup();
        sb600_early_setup();
-       
+
        post_code(0x04);
-       
+
        /* Check to see if processor is capable of changing FIDVID  */
        /* otherwise it will throw a GP# when reading FIDVID_STATUS */
        cpuid1 = cpuid(0x80000007);
@@ -293,16 +293,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        } else {
                __DEBUG__("Changing FIDVID not supported\n");
        }
-       
+
        post_code(0x05);
-       
+
        needs_reset = optimize_link_coherent_ht();
        needs_reset |= optimize_link_incoherent_ht(sysinfo);
        rs690_htinit();
        __DEBUG__("needs_reset=0x%x\n", needs_reset);
-       
+
        post_code(0x06);
-       
+
        if (needs_reset) {
                __INFO__("ht reset -\n");
                soft_reset();
@@ -314,19 +314,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        __DEBUG__("sysinfo->nodes: %2x  sysinfo->ctrl: %p  spd_addr: %p\n",
                     sysinfo->nodes, sysinfo->ctrl, spd_addr);
        fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-       
+
        post_code(0x07);
-       
+
        sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-       
+
        post_code(0x08);
-       
+
        rs690_before_pci_init(); // does nothing
        sb600_before_pci_init();
-       
-#if CONFIG_USE_OPTION_TABLE    
+
+#if CONFIG_USE_OPTION_TABLE
        if( read_option(cmos_defaults_loaded, 0) )
-               __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n"); 
+               __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n");
 #endif
 
        post_cache_as_ram();