Update documentation in smmrelocate.S to mention TSEG

[coreboot.git] / src / cpu / x86 / smm / smmrelocate.S

diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S
index e795359783d7d5902e1833504bf78f287dbe379d..18d668c9dd0cfdd5eb367af7ad600a5a3b63844a 100644 (file)
--- a/src/cpu/x86/smm/smmrelocate.S
+++ b/src/cpu/x86/smm/smmrelocate.S
@@ -22,18 +22,29 @@
 // Make sure no stage 2 code is included:
 #define __PRE_RAM__
 
+/* On AMD's platforms we can set SMBASE by writing an MSR */
+#if !CONFIG_NORTHBRIDGE_AMD_AMDK8 && !CONFIG_NORTHBRIDGE_AMD_AMDFAM10
+
 // FIXME: Is this piece of code southbridge specific, or
 // can it be cleaned up so this include is not required?
 // It's needed right now because we get our DEFAULT_PMBASE from
 // here.
-#if defined(CONFIG_SOUTHBRIDGE_INTEL_I82801GX)
+#if CONFIG_SOUTHBRIDGE_INTEL_I82801GX
 #include "../../../southbridge/intel/i82801gx/i82801gx.h"
-#elif defined(CONFIG_SOUTHBRIDGE_INTEL_I82801DX)
+#elif CONFIG_SOUTHBRIDGE_INTEL_I82801DX
 #include "../../../southbridge/intel/i82801dx/i82801dx.h"
+#elif CONFIG_SOUTHBRIDGE_INTEL_SCH
+#include "../../../southbridge/intel/sch/sch.h"
 #else
 #error "Southbridge needs SMM handler support."
 #endif
 
+#if CONFIG_SMM_TSEG
+
+#include <cpu/x86/mtrr.h>
+
+#endif /* CONFIG_SMM_TSEG */
+
 #define LAPIC_ID 0xfee00020
 
 .global smm_relocation_start
@@ -43,13 +54,22 @@
 .code16
 
 /**
- * This trampoline code relocates SMBASE to 0xa0000 - ( lapicid * 0x400 )
+ * When starting up, x86 CPUs have their SMBASE set to 0x30000. However,
+ * this is not a good place for the SMM handler to live, so it needs to
+ * be relocated.
+ * Traditionally SMM handlers used to live in the A segment (0xa0000).
+ * With growing SMM handlers, more CPU cores, etc. CPU vendors started
+ * allowing to relocate the handler to the end of physical memory, which
+ * they refer to as TSEG.
+ * This trampoline code relocates SMBASE to base address - ( lapicid * 0x400 )
  *
  * Why 0x400? It is a safe value to cover the save state area per CPU. On
  * current AMD CPUs this area is _documented_ to be 0x200 bytes. On Intel
  * Core 2 CPUs the _documented_ parts of the save state area is 48 bytes
  * bigger, effectively sizing our data structures 0x300 bytes.
  *
+ * Example (with SMM handler living at 0xa0000):
+ *
  * LAPICID     SMBASE          SMM Entry       SAVE STATE
  *    0                0xa0000         0xa8000         0xafd00
  *    1                0x9fc00         0xa7c00         0xaf900
@@ -77,13 +97,7 @@
  * at 0xa8000-0xa8100 (example for core 0). That is not enough.
  *
  * This means we're basically limited to 16 cpu cores before
- * we need to use the TSEG/HSEG for the actual SMM handler plus stack.
- * When we exceed 32 cores, we also need to put SMBASE to TSEG/HSEG.
- *
- * If we figure out the documented values above are safe to use,
- * we could pack the structure above even more, so we could use the
- * scheme to pack save state areas for 63 AMD CPUs or 58 Intel CPUs
- * in the ASEG.
+ * we need to move the SMM handler to TSEG.
  *
  * Note: Some versions of Pentium M need their SMBASE aligned to 32k.
  * On those the above only works for up to 2 cores. But for now we only
@@ -95,6 +109,7 @@ smm_relocation_start:
        /* Check revision to see if AMD64 style SMM_BASE
         *   Intel Core Solo/Duo:  0x30007
         *   Intel Core2 Solo/Duo: 0x30100
+        *   Intel SandyBridge:    0x30101
         *   AMD64:                0x3XX64
         * This check does not make much sense, unless someone ports
         * SMI handling to AMD64 CPUs.
@@ -122,11 +137,53 @@ smm_relocate:
        movl %ecx, %edx
        shl $10, %edx
 
+#if CONFIG_SMM_TSEG
+       movl    $(TSEG_BAR), %ecx       /* Get TSEG base from PCIE */
+       addr32  movl (%ecx), %eax       /* Save TSEG_BAR in %eax */
+       andl    $~1, %eax               /* Remove lock bit */
+#else
        movl $0xa0000, %eax
+#endif
        subl %edx, %eax /* subtract offset, see above */
 
        addr32 movl %eax, (%ebx)
 
+#if CONFIG_SMM_TSEG
+       /* Check for SMRR capability in MTRRCAP[11] */
+       movl    $MTRRcap_MSR, %ecx
+       rdmsr
+       bt      $11, %eax
+       jnc     skip_smrr
+
+       /* TSEG base */
+       movl    $(TSEG_BAR), %ecx       /* Get TSEG base from PCIE */
+       addr32  movl (%ecx), %eax       /* Save TSEG_BAR in %eax */
+       andl    $~1, %eax               /* Remove lock bit */
+       movl    %eax, %ebx
+
+       /* Set SMRR base address. */
+       movl    $SMRRphysBase_MSR, %ecx
+       orl     $MTRR_TYPE_WRBACK, %eax
+       xorl    %edx, %edx
+       wrmsr
+
+       /* Set SMRR mask. */
+       movl    $SMRRphysMask_MSR, %ecx
+       movl    $(~(CONFIG_SMM_TSEG_SIZE - 1) | MTRRphysMaskValid), %eax
+       xorl    %edx, %edx
+       wrmsr
+
+#if CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE
+       /*
+        * IED base is top 4M of TSEG
+        */
+       addl    $(CONFIG_SMM_TSEG_SIZE - IED_SIZE), %ebx
+       movl    $(0x30000 + 0x8000 + 0x7eec), %eax
+       addr32  movl %ebx, (%eax)
+#endif
+
+skip_smrr:
+#endif
 
        /* The next section of code is potentially southbridge specific */
 
@@ -148,7 +205,7 @@ smm_relocate:
 
        /* End of southbridge specific section. */
 
-#if defined(CONFIG_DEBUG_SMM_RELOCATION) && CONFIG_DEBUG_SMM_RELOCATION
+#if CONFIG_DEBUG_SMM_RELOCATION
        /* print [SMM-x] so we can determine if CPUx went to SMM */
        movw $CONFIG_TTYS0_BASE, %dx
        mov $'[', %al
@@ -175,4 +232,4 @@ smm_relocate:
        /* That's it. return */
        rsm
 smm_relocation_end:
-
+#endif