#include #include #include #include #include #include #include #include #include #include "chip.h" #include "northbridge.h" #include #include #include /* put this here for now, we are not sure where it belongs */ struct gliutable { unsigned long desc_name; unsigned short desc_type; unsigned long hi, lo; }; struct gliutable gliu0table[] = { {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/ {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc*/ {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo*/ {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ {.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU}, {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0}, }; struct gliutable gliu1table[] = { {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/ {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc*/ {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode)*/ {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/ {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/ {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/ {.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0}, {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0*/ {.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0}, }; struct gliutable *gliutables[] = {gliu0table, gliu1table, 0}; struct msrinit { unsigned long msrnum; msr_t msr; }; struct msrinit ClockGatingDefault [] = { {GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}}, /* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142*/ {MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, {GLIU1_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}}, {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/ {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}}, {DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0155}}, {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, {GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on*/ {0xffffffff, {0xffffffff, 0xffffffff}}, }; /* All On*/ struct msrinit ClockGatingAllOn[] = { {GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {GLIU1_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {VG_GLD_MSR_PM, {.hi=0x00, .lo=0x00}}, {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x000000001}}, {DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, {0xffffffff, {0xffffffff, 0xffffffff}}, }; /* Performance*/ struct msrinit ClockGatingPerformance[] = { {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/ {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}}, {DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0155}}, {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, {0xffffffff, {0xffffffff, 0xffffffff}}, }; /* */ /* SET GeodeLink PRIORITY*/ /* */ struct msrinit GeodeLinkPriorityTable [] = { {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority.*/ {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority.*/ {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority.*/ {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}}, /* Graphics Priority.*/ {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID*/ {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID*/ {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* VIP PID*/ {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}}, /* AES PID*/ {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END*/ }; /* do we have dmi or not? assume NO per AMD */ int havedmi = 0; static void writeglmsr(struct gliutable *gl){ msr_t msr; msr.lo = gl->lo; msr.hi = gl->hi; wrmsr(gl->desc_name, msr); // MSR - see table above printk(BIOS_DEBUG, "%s: write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); /* they do this, so we do this */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void ShadowInit(struct gliutable *gl) { msr_t msr; msr = rdmsr(gl->desc_name); if (msr.lo == 0) { writeglmsr(gl); } } /* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here. * CLEAN ME UP */ /* yes, this duplicates later code, but it seems that is how they want it done. */ static void SysmemInit(struct gliutable *gl) { msr_t msr; int sizembytes, sizebytes; /* * Figure out how much RAM is in the machine and alocate all to the * system. We will adjust for SMM and DMM now and Frame Buffer later. */ sizembytes = sizeram(); printk(BIOS_DEBUG, "%s: enable for %dm bytes\n", __func__, sizembytes); sizebytes = sizembytes << 20; sizebytes -= SMM_SIZE*1024 +1; if (havedmi) sizebytes -= DMM_SIZE * 1024 + 1; sizebytes -= 1; msr.hi = (gl->hi & 0xFFFFFF00) | (sizebytes >> 24); /* set up sizebytes to fit into msr.lo */ sizebytes <<= 8; /* what? well, we want bits 23:12 in bits 31:20. */ sizebytes &= 0xfff00000; sizebytes |= 0x100; msr.lo = sizebytes; wrmsr(gl->desc_name, msr); // MSR - see table above msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void DMMGL0Init(struct gliutable *gl) { msr_t msr; int sizebytes = sizeram()<<20; long offset; if (! havedmi) return; printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); sizebytes -= DMM_SIZE*1024; offset = sizebytes - DMM_OFFSET; printk(BIOS_DEBUG, "%s: offset is 0x%08lx\n", __func__, offset); offset >>= 12; msr.hi = (gl->hi) | (offset << 8); /* I don't think this is needed */ msr.hi &= 0xffffff00; msr.hi |= (DMM_OFFSET >> 24); msr.lo = DMM_OFFSET << 8; msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void DMMGL1Init(struct gliutable *gl) { msr_t msr; if (! havedmi) return; printk(BIOS_DEBUG, "%s:\n", __func__ ); msr.hi = gl->hi; /* I don't think this is needed */ msr.hi &= 0xffffff00; msr.hi |= (DMM_OFFSET >> 24); msr.lo = DMM_OFFSET << 8; /* hmm. AMD source has SMM here ... SMM, not DMM? We think DMM */ printk(BIOS_ERR, "%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__); msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void SMMGL0Init(struct gliutable *gl) { msr_t msr; int sizebytes = sizeram()<<20; long offset; sizebytes -= SMM_SIZE*1024; if (havedmi) sizebytes -= DMM_SIZE * 1024; printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); offset = sizebytes - SMM_OFFSET; printk(BIOS_DEBUG, "%s: offset is 0x%08lx\n", __func__, offset); offset >>= 12; msr.hi = offset << 8; msr.hi |= SMM_OFFSET>>24; msr.lo = SMM_OFFSET << 8; msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void SMMGL1Init(struct gliutable *gl) { msr_t msr; printk(BIOS_DEBUG, "%s:\n", __func__ ); msr.hi = gl->hi; /* I don't think this is needed */ msr.hi &= 0xffffff00; msr.hi |= (SMM_OFFSET >> 24); msr.lo = SMM_OFFSET << 8; msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void GLIUInit(struct gliutable *gl){ while (gl->desc_type != GL_END){ switch(gl->desc_type){ default: /* For Unknown types: Write then read MSR */ writeglmsr(gl); case SC_SHADOW: /* Check for a Shadow entry*/ ShadowInit(gl); break; case R_SYSMEM: /* check for a SYSMEM entry*/ SysmemInit(gl); break; case BMO_DMM: /* check for a DMM entry*/ DMMGL0Init(gl); break; case BM_DMM : /* check for a DMM entry*/ DMMGL1Init(gl); break; case BMO_SMM : /* check for a SMM entry*/ SMMGL0Init(gl); break; case BM_SMM : /* check for a SMM entry*/ SMMGL1Init(gl); break; } gl++; } } /* ***************************************************************************/ /* **/ /* * GLPCIInit*/ /* **/ /* * Set up GLPCI settings for reads/write into memory*/ /* * R0: 0-640KB,*/ /* * R1: 1MB - Top of System Memory*/ /* * R2: SMM Memory*/ /* * R3: Framebuffer? - not set up yet*/ /* * R4: ??*/ /* **/ /* * Entry:*/ /* * Exit:*/ /* * Modified:*/ /* **/ /* ***************************************************************************/ static void GLPCIInit(void){ struct gliutable *gl = 0; int i; msr_t msr; int msrnum; /* */ /* R0 - GLPCI settings for Conventional Memory space.*/ /* */ msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT /* 640*/; msr.lo = 0 /* 0*/; msr.lo |= GLPCI_RC_LOWER_EN_SET+ GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET; msrnum = GLPCI_RC0; wrmsr(msrnum, msr); /* */ /* R1 - GLPCI settings for SysMem space.*/ /* */ /* Get systop from GLIU0 SYSTOP Descriptor*/ for(i = 0; gliu0table[i].desc_name != GL_END; i++) { if (gliu0table[i].desc_type == R_SYSMEM) { gl = &gliu0table[i]; break; } } if (gl) { unsigned long pah, pal; msrnum = gl->desc_name; msr = rdmsr(msrnum); /* example R_SYSMEM value: 20:00:00:0f:fb:f0:01:00 * translates to a base of 0x00100000 and top of 0xffbf0000 * base of 1M and top of around 256M */ /* we have to create a page-aligned (4KB page) address for base and top */ /* So we need a high page aligned addresss (pah) and low page aligned address (pal) * pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12 */ printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); pah = ((msr.hi &0xff) << 12) | ((msr.lo >> 20) & 0xfff); /* we have the page address. Now make it a page-aligned address */ pah <<= 12; pal = msr.lo << 12; msr.hi = pah; msr.lo = pal; msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | GLPCI_RC_LOWER_WC_SET; printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); msrnum = GLPCI_RC1; wrmsr(msrnum, msr); } /* */ /* R2 - GLPCI settings for SMM space.*/ /* */ msr.hi = ((SMM_OFFSET+(SMM_SIZE*1024-1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT; msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET; msrnum = GLPCI_RC2; wrmsr(msrnum, msr); /* this is done elsewhere already, but it does no harm to do it more than once */ /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/ msr.lo = 0x021212121 /* cache disabled and write serialized*/; msr.hi = 0x021212121 /* cache disabled and write serialized*/; msrnum = CPU_RCONF_A0_BF; wrmsr(msrnum, msr); msrnum = CPU_RCONF_C0_DF; wrmsr(msrnum, msr); msrnum = CPU_RCONF_E0_FF; wrmsr(msrnum, msr); /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup.*/ msrnum = GLPCI_A0_BF; msr.hi = 0x35353535; msr.lo = 0x35353535; wrmsr(msrnum, msr); msrnum = GLPCI_C0_DF; msr.hi = 0x35353535; msr.lo = 0x35353535; wrmsr(msrnum, msr); msrnum = GLPCI_E0_FF; msr.hi = 0x35353535; msr.lo = 0x35353535; wrmsr(msrnum, msr); /* Set WSREQ*/ msrnum = CPU_DM_CONFIG0; msr = rdmsr(msrnum); msr.hi &= ~ (7 << DM_CONFIG0_UPPER_WSREQ_SHIFT); msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode.*/ wrmsr(msrnum, msr); /* we are ignoring the 5530 case for now, and perhaps forever. */ /* */ /* 5535 NB Init*/ /* */ msrnum = GLPCI_ARB; msr = rdmsr(msrnum); msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET; msr.lo |= GLPCI_ARB_LOWER_IIE_SET; wrmsr(msrnum, msr); msrnum = GLPCI_CTRL; msr = rdmsr(msrnum); msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .)*/ msr.lo |= GLPCI_CTRL_LOWER_LDE_SET; msr.lo &= ~ (0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT); msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT; msr.lo &= ~ (0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT); msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT; msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT); msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT; msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT); msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT; msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT); msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT; msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT); msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT; msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT); msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT; wrmsr(msrnum, msr); /* Set GLPCI Latency Timer.*/ msrnum = GLPCI_CTRL; msr = rdmsr(msrnum); msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone.*/ wrmsr(msrnum, msr); /* GLPCI_SPARE*/ msrnum = GLPCI_SPARE; msr = rdmsr(msrnum); msr.lo &= ~ 0x7; msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET; wrmsr(msrnum, msr); } /* ***************************************************************************/ /* **/ /* * ClockGatingInit*/ /* **/ /* * Enable Clock Gating.*/ /* **/ /* * Entry:*/ /* * Exit:*/ /* * Modified:*/ /* **/ /* ***************************************************************************/ static void ClockGatingInit (void){ msr_t msr; struct msrinit *gating = ClockGatingDefault; int i; #if 0 mov cx, TOKEN_CLK_GATE NOSTACK bx, GetNVRAMValueBX cmp al, TVALUE_CG_OFF je gatingdone cmp al, TVALUE_CG_DEFAULT jb allon ja performance lea si, ClockGatingDefault jmp nextdevice allon: lea si, ClockGatingAllOn jmp nextdevice performance: lea si, ClockGatingPerformance #endif for(i = 0; gating->msrnum != 0xffffffff; i++) { msr = rdmsr(gating->msrnum); printk(BIOS_DEBUG, "%s: MSR 0x%08lx is 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); msr.hi |= gating->msr.hi; msr.lo |= gating->msr.lo; printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); wrmsr(gating->msrnum, msr); // MSR - See the table above gating +=1; } } static void GeodeLinkPriority(void){ msr_t msr; struct msrinit *prio = GeodeLinkPriorityTable; int i; for(i = 0; prio->msrnum != 0xffffffff; i++) { msr = rdmsr(prio->msrnum); printk(BIOS_DEBUG, "%s: MSR 0x%08lx is 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); msr.hi |= prio->msr.hi; msr.lo &= ~0xfff; msr.lo |= prio->msr.lo; printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); wrmsr(prio->msrnum, msr); // MSR - See the table above prio +=1; } } /* * Get the GLIU0 shadow register settings * If the setShadow function is used then all shadow descriptors * will stay sync'ed. */ static uint64_t getShadow(void) { msr_t msr; msr = rdmsr(MSR_GLIU0_SHADOW); return ( ( (uint64_t) msr.hi ) << 32 ) | msr.lo; } /* * Set the cache RConf registers for the memory hole. * Keeps all cache shadow descriptors sync'ed. * This is part of the PCI lockup solution * Entry: EDX:EAX is the shadow settings */ static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo) { // ok this is whacky bit translation time. int bit; uint8_t shadowByte; msr_t msr; shadowByte = (uint8_t) (shadowLo >> 16); // load up D000 settings in edx. for (bit = 8; (bit > 4); bit--) { msr.hi <<= 8; msr.hi |= 1; // cache disable PCI/Shadow memory if (shadowByte && (1 << bit)) msr.hi |= 0x20; // write serialize PCI memory } // load up C000 settings in eax. for ( ; bit; bit--) { msr.lo <<= 8; msr.lo |= 1; // cache disable PCI/Shadow memory if (shadowByte && (1 << bit)) msr.lo |= 0x20; // write serialize PCI memory } wrmsr(CPU_RCONF_C0_DF, msr); shadowByte = (uint8_t) (shadowLo >> 24); // load up F000 settings in edx. for (bit = 8; (bit > 4); bit--) { msr.hi <<= 8; msr.hi |= 1; // cache disable PCI/Shadow memory if (shadowByte && (1 << bit)) msr.hi |= 0x20; // write serialize PCI memory } // load up E000 settings in eax. for ( ; bit; bit--) { msr.lo <<= 8; msr.lo |= 1; // cache disable PCI/Shadow memory if (shadowByte && (1 << bit)) msr.lo |= 0x20; // write serialize PCI memory } wrmsr(CPU_RCONF_E0_FF, msr); } /* * Set the GLPCI registers for the memory hole. * Keeps all cache shadow descriptors sync'ed. * Entry: EDX:EAX is the shadow settings */ static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo) { msr_t msr; // Set the Enable Register. msr = rdmsr(GLPCI_REN); msr.lo &= 0xFFFF00FF; msr.lo |= ( (shadowLo & 0xFFFF0000) >> 8); wrmsr(GLPCI_REN, msr); } /* * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW. * Keeps all shadow descriptors sync'ed. * Entry: EDX:EAX is the shadow settings */ static void setShadow(uint64_t shadowSettings) { int i; msr_t msr; struct gliutable* pTable; uint32_t shadowLo, shadowHi; shadowLo = (uint32_t) shadowSettings; shadowHi = (uint32_t) (shadowSettings >> 32); setShadowRCONF(shadowHi, shadowLo); setShadowGLPCI(shadowHi, shadowLo); for(i = 0; gliutables[i]; i++) { for (pTable = gliutables[i]; pTable->desc_type != GL_END; pTable++) { if (pTable->desc_type == SC_SHADOW) { msr = rdmsr(pTable->desc_name); msr.lo = (uint32_t) shadowSettings; msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX msr.hi |= ((uint32_t) (shadowSettings >> 32)) & 0x0000FFFF; wrmsr(pTable->desc_name, msr); // MSR - See the table above } } } } /************************************************************************** * * shadowRom * * Set up a stack for ease of further testing * * Entry: * Exit: * Destroys: * **************************************************************************/ static void shadowRom(void) { uint64_t shadowSettings = getShadow(); shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; // Disable read & writes shadowSettings |= (uint64_t) 0x00000000F0000000ULL; // Enable reads for F0000-FFFFF setShadow(shadowSettings); } /*************************************************************************** * * RCONFInit * Set up RCONF_DEFAULT and any other RCONF registers needed * * DEVRC_RCONF_DEFAULT: * ROMRC(63:56) = 04h ; write protect ROMBASE * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst. * SYSTOP(27:8) = top of system memory * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough * ***************************************************************************/ #define SYSMEM_RCONF_WRITETHROUGH 8 #define DEVRC_RCONF_DEFAULT 0x21 #define ROMBASE_RCONF_DEFAULT 0xFFFC0000 #define ROMRC_RCONF_DEFAULT 0x25 static void RCONFInit(void) { struct gliutable *gl = 0; int i; msr_t msr; uint8_t SysMemCacheProp; /* Locate SYSMEM entry in GLIU0table */ for(i = 0; gliu0table[i].desc_name != GL_END; i++) { if (gliu0table[i].desc_type == R_SYSMEM) { gl = &gliu0table[i]; break; } } if (gl == 0) { post_code(0xCE); /* POST_RCONFInitError */ while (1); } // sysdescfound: /* found the descriptor... get its contents */ msr = rdmsr(gl->desc_name); /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the * top 8 bits go into 0-7 of edx. */ msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF); msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF; msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8 // Set Default SYSMEM region properties msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // 8 (or ~8) // Set PCI space cache properties msr.hi = (DEVRC_RCONF_DEFAULT >> 4); // only need the bottom bits and lets clean the rest of edx msr.lo |= (DEVRC_RCONF_DEFAULT << 28); // Set the ROMBASE. This is usually FFFC0000h msr.hi |= (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT; // Set ROMBASE cache properties. msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24)); // now program RCONF_DEFAULT wrmsr(CPU_RCONF_DEFAULT, msr); // RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. // Set to match system memory cache properties. msr = rdmsr(CPU_RCONF_DEFAULT); SysMemCacheProp = (uint8_t) (msr.lo & 0xFF); msr = rdmsr(CPU_RCONF_BYPASS); msr.lo = (msr.lo & 0xFFFF0000) | (SysMemCacheProp << 8) | SysMemCacheProp; wrmsr(CPU_RCONF_BYPASS, msr); } /* ***************************************************************************/ /* **/ /* * northBridgeInit*/ /* **/ /* * Core Logic initialization: Host bridge*/ /* **/ /* * Entry:*/ /* * Exit:*/ /* * Modified:*/ /* **/ /* ***************************************************************************/ void northbridgeinit(void) { msr_t msr; int i; printk(BIOS_DEBUG, "Enter %s\n", __func__); for(i = 0; gliutables[i]; i++) GLIUInit(gliutables[i]); GeodeLinkPriority(); shadowRom(); // GeodeROM ensures that the BIOS waits the required 1 second before // allowing anything to access PCI // PCIDelay(); RCONFInit(); // The cacheInit function in GeodeROM tests cache and, among other things, // makes sure all INVD instructions are treated as WBINVD. We do this // because we've found some programs which require this behavior. // That subset of cacheInit() is implemented here: msr = rdmsr(CPU_DM_CONFIG0); msr.lo |= DM_CONFIG0_LOWER_WBINVD_SET; wrmsr(CPU_DM_CONFIG0, msr); /* Now that the descriptor to memory is set up.*/ /* The memory controller needs one read to synch its lines before it can be used.*/ i = *(int *) 0; GLPCIInit(); ClockGatingInit(); __asm__("FINIT\n"); /* CPUBugsFix -- called elsewhere */ printk(BIOS_DEBUG, "Exit %s\n", __func__); }