#ifndef PC80_MC146818RTC_H #define PC80_MC146818RTC_H #ifndef RTC_BASE_PORT #define RTC_BASE_PORT 0x70 #endif #define RTC_PORT(x) (RTC_BASE_PORT + (x)) /* control registers - Moto names */ #define RTC_REG_A 10 #define RTC_REG_B 11 #define RTC_REG_C 12 #define RTC_REG_D 13 /********************************************************************** * register details **********************************************************************/ #define RTC_FREQ_SELECT RTC_REG_A /* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, * totalling to a max high interval of 2.228 ms. */ # define RTC_UIP 0x80 # define RTC_DIV_CTL 0x70 /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ # define RTC_REF_CLCK_4MHZ 0x00 # define RTC_REF_CLCK_1MHZ 0x10 # define RTC_REF_CLCK_32KHZ 0x20 /* 2 values for divider stage reset, others for "testing purposes only" */ # define RTC_DIV_RESET1 0x60 # define RTC_DIV_RESET2 0x70 /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ # define RTC_RATE_SELECT 0x0F # define RTC_RATE_NONE 0x00 # define RTC_RATE_32786HZ 0x01 # define RTC_RATE_16384HZ 0x02 # define RTC_RATE_8192HZ 0x03 # define RTC_RATE_4096HZ 0x04 # define RTC_RATE_2048HZ 0x05 # define RTC_RATE_1024HZ 0x06 # define RTC_RATE_512HZ 0x07 # define RTC_RATE_256HZ 0x08 # define RTC_RATE_128HZ 0x09 # define RTC_RATE_64HZ 0x0a # define RTC_RATE_32HZ 0x0b # define RTC_RATE_16HZ 0x0c # define RTC_RATE_8HZ 0x0d # define RTC_RATE_4HZ 0x0e # define RTC_RATE_2HZ 0x0f /**********************************************************************/ #define RTC_CONTROL RTC_REG_B # define RTC_SET 0x80 /* disable updates for clock setting */ # define RTC_PIE 0x40 /* periodic interrupt enable */ # define RTC_AIE 0x20 /* alarm interrupt enable */ # define RTC_UIE 0x10 /* update-finished interrupt enable */ # define RTC_SQWE 0x08 /* enable square-wave output */ # define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ # define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ # define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ /**********************************************************************/ #define RTC_INTR_FLAGS RTC_REG_C /* caution - cleared by read */ # define RTC_IRQF 0x80 /* any of the following 3 is active */ # define RTC_PF 0x40 # define RTC_AF 0x20 # define RTC_UF 0x10 /**********************************************************************/ #define RTC_VALID RTC_REG_D # define RTC_VRT 0x80 /* valid RAM and time */ /**********************************************************************/ /* On PCs, the checksum is built only over bytes 16..45 */ #define PC_CKS_RANGE_START 16 #define PC_CKS_RANGE_END 45 #define PC_CKS_LOC 46 #ifndef UTIL_BUILD_OPTION_TABLE #include static inline unsigned char cmos_read(unsigned char addr) { int offs = 0; if (addr >= 128) { offs = 2; addr -= 128; } outb(addr, RTC_BASE_PORT + offs + 0); return inb(RTC_BASE_PORT + offs + 1); } static inline void cmos_write(unsigned char val, unsigned char addr) { int offs = 0; if (addr >= 128) { offs = 2; addr -= 128; } outb(addr, RTC_BASE_PORT + offs + 0); outb(val, RTC_BASE_PORT + offs + 1); } static inline u32 cmos_read32(u8 offset) { u32 value = 0; u8 i; for (i = 0; i < sizeof(value); ++i) value |= cmos_read(offset + i) << (i << 3); return value; } static inline void cmos_write32(u8 offset, u32 value) { u8 i; for (i = 0; i < sizeof(value); ++i) cmos_write((value >> (i << 3)) & 0xff, offset + i); } #endif #if !defined(__ROMCC__) void rtc_init(int invalid); #if CONFIG_USE_OPTION_TABLE int set_option(const char *name, void *val); int get_option(void *dest, const char *name); unsigned read_option_lowlevel(unsigned start, unsigned size, unsigned def); #else static inline int set_option(const char *name __attribute__((unused)), void *val __attribute__((unused))) { return -2; }; static inline int get_option(void *dest __attribute__((unused)), const char *name __attribute__((unused))) { return -2; } #define read_option_lowlevel(start, size, def) def #endif #else #include #endif #define read_option(name, default) read_option_lowlevel(CMOS_VSTART_ ##name, CMOS_VLEN_ ##name, (default)) #endif /* PC80_MC146818RTC_H */