#ifndef DEVICE_H
#define DEVICE_H

#include <stdint.h>
#include <device/resource.h>

struct device;
typedef struct device * device_t;

struct device_operations {
	void (*read_resources)(device_t dev);
	void (*set_resources)(device_t dev);
	void (*init)(device_t dev);
	unsigned int (*scan_bus)(device_t  bus, unsigned int max);
	void (*enable)(device_t dev);
};


#define MAX_RESOURCES 6
/*
 * There is one device structure for each slot-number/function-number
 * combination:
 */

struct device {
	device_t bus;		/* bus this device is on */
	device_t children;	/* devices behind this bridge */
	device_t sibling;	/* next device on this bus */
	device_t next;		/* chain of all devices */

	unsigned int	devfn;		/* encoded device & function index */
	unsigned short	vendor;
	unsigned short	device;
	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
	unsigned int	hdr_type;	/* PCI header type */
	unsigned int    enable : 1;	/* set if we should enable the device */

	unsigned char	secondary; 	/* secondary bus number */
	unsigned char	subordinate;	/* max subordinate bus number */
	uint8_t command;
	/*
	 * In theory, the irq level can be read from configuration
	 * space and all would be fine.  However, old PCI chips don't
	 * support these registers and return 0 instead.  For example,
	 * the Vision864-P rev 0 chip can uses INTA, but returns 0 in
	 * the interrupt line and pin registers.  pci_init()
	 * initializes this field with the value at PCI_INTERRUPT_LINE
	 * and it is the job of pcibios_fixup() to change it if
	 * necessary.  The field must not be 0 unless the device
	 * cannot generate interrupts at all.
	 */
	unsigned int	irq;		/* irq generated by this device */

	/* Base registers for this device, can be adjusted by
	 * pcibios_fixup() as necessary.
	 */
	struct resource resource[MAX_RESOURCES];
	unsigned int resources;
	unsigned long rom_address;
	struct device_operations *ops;
};

extern struct device	dev_root;	/* root bus */
extern struct device	*all_devices;	/* list of all devices */


/* Generic device interface functions */
extern void dev_enumerate(void);
extern void dev_configure(void);
extern void dev_enable(void);
extern void dev_initialize(void);

/* Generic device helper functions */
void append_device(device_t dev);
void compute_allocate_resource(device_t bus, struct resource *bridge,
	unsigned long type_mask, unsigned long type);
void assign_resources(device_t bus);
void enumerate_static_device(void);

/* Helper functions */
device_t dev_find_device (unsigned int vendor, unsigned int device, device_t from);
device_t dev_find_class (unsigned int class, device_t from);
device_t dev_find_slot (unsigned int bus, unsigned int devfn);

/* Rounding for boundaries. 
 * Due to some chip bugs, go ahead and roung IO to 16
 */
#define DEVICE_IO_ALIGN 16 
#define DEVICE_MEM_ALIGN 4096


#endif /* DEVICE_H */