## ## This file is part of the libpayload project. ## ## Copyright (C) 2008 Advanced Micro Devices, Inc. ## Copyright (C) 2008 coresystems GmbH ## ## Redistribution and use in source and binary forms, with or without ## modification, are permitted provided that the following conditions ## are met: ## 1. Redistributions of source code must retain the above copyright ## notice, this list of conditions and the following disclaimer. ## 2. Redistributions in binary form must reproduce the above copyright ## notice, this list of conditions and the following disclaimer in the ## documentation and/or other materials provided with the distribution. ## 3. The name of the author may not be used to endorse or promote products ## derived from this software without specific prior written permission. ## ## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE ## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ## SUCH DAMAGE. ## mainmenu "Libpayload Configuration" menu "Generic Options" config EXPERIMENTAL bool "Experimental Options" default n help Prompt for experimental functionality. Attention: This is not likely to work without problems config OBSOLETE bool "Obsolete Options" default n help Prompt for obsolete options. These options are for old, unsupported features and are likely to go away in the future. config DEVELOPER bool "Developer Options" default n help Prompt for developer options. These options are only interesting for libpayload developers. endmenu menu "Architecture Options" choice prompt "Target Architecture" default TARGET_I386 config TARGET_I386 bool "x86" help Support the x86 architecture config TARGET_POWERPC bool "PowerPC" help Support the PowerPC architecture endchoice config MEMMAP_RAM_ONLY bool "Only consider RAM entries in memory map for further processing" default n config MULTIBOOT bool "Multiboot header support" depends on TARGET_I386 default y endmenu menu "Standard Libraries" config LIBC bool "Enable C library support" default y config TINYCURSES bool "Enable tinycurses support" default y config LAR bool "LAR support" default n depends on OBSOLETE help LAR is the archive format of (obsolete) coreboot v3 config CBFS bool "CBFS support" default y help CBFS is the archive format of (obsolete) coreboot v3 endmenu menu "Console Options" config SERIAL_CONSOLE bool "See output on the serial port console" default y config SERIAL_IOBASE hex "I/O base for the serial port (default 0x3f8)" depends on SERIAL_CONSOLE default 0x3f8 config SERIAL_SET_SPEED bool "Override the serial console baud rate" default n depends on SERIAL_CONSOLE config SERIAL_BAUD_RATE int "Serial console baud rate (default 115200)" depends on SERIAL_SET_SPEED default 115200 config SERIAL_ACS_FALLBACK bool "Use plain ASCII characters for ACS" default n depends on SERIAL_CONSOLE help The alternate character set (ACS) is used for drawing lines and displaying a couple of other special graphics characters. The ACS characters generally look good on screen, but can be difficult to cut and paste from a terminal window to a text editor. Say 'y' here if you want to always use plain ASCII characters to approximate the appearance of ACS characters on the serial port console. config VIDEO_CONSOLE bool "See output on a video console" default y config VGA_VIDEO_CONSOLE bool "VGA video console driver" depends on VIDEO_CONSOLE default y config GEODELX_VIDEO_CONSOLE bool "Geode LX video console driver" depends on VIDEO_CONSOLE default n config COREBOOT_VIDEO_CONSOLE bool "coreboot video console driver" depends on VIDEO_CONSOLE && !GEODELX_VIDEO_CONSOLE default n help Say Y here if coreboot switched to a graphics mode and your payload wants to use it. config PC_KEYBOARD bool "Allow input from a PC keyboard" default y config PC_KEYBOARD_LAYOUT_US bool "English (US) keyboard layout" depends on PC_KEYBOARD default y config PC_KEYBOARD_LAYOUT_DE bool "German keyboard layout" depends on PC_KEYBOARD default n endmenu menu "Drivers" config PCI bool "Support for PCI devices" default y config NVRAM bool "Support for reading/writing NVRAM bytes" default y config RTC_PORT_EXTENDED_VIA bool "Extended RTC ports are 0x74/0x75" default n help For recent chipsets with 256 NVRAM bytes, you have to access the upper 128 bytes (128-255) using two different I/O ports, usually 0x72/0x73. On some chipsets this can be a different set of ports, though. The VIA VT8237R for example only recognizes the ports 0x74/0x75 for accessing the high 128 NVRAM bytes (as seems to be the case for multiple VIA chipsets). If you want to read or write CMOS bytes on computers with one of these chipsets, say 'y' here. config SPEAKER bool "Support for PC speaker" default y config USB bool "USB Support" default n config USB_UHCI bool "Support for USB UHCI controllers" depends on USB help Select this option if you are going to use USB 1.1 on an Intel based system. config USB_OHCI bool "Support for USB OHCI controllers" depends on USB help Select this option if you are going to use USB 1.1 on an AMD based system. config USB_EHCI bool "Support for USB EHCI controllers" depends on USB help Select this option if you want to use USB 2.0 config USB_XHCI bool "Support for USB xHCI controllers" depends on USB help Select this option if you want to use USB 3.0 NOTE: This option is not (fully) implemented yet config USB_HID bool "Support for USB keyboards" depends on USB default y help Select this option if you want to use devices complying to the USB HID (Human Interface Device) standard. Such devices are for example keyboards and mice. Currently only keyboards are supported. Say Y here unless you know exactly what you are doing. config USB_HUB bool "Support for USB hubs" depends on USB default y help Select this option if you want to compile in support for USB hubs. Say Y here unless you know exactly what you are doing. config USB_MSC bool "Support for USB storage" depends on USB default y help Select this option if you want to compile in support for USB mass storage devices (USB memory sticks, hard drives, CDROM/DVD drives) Say Y here unless you know exactly what you are doing. endmenu menu "Debugging" depends on DEVELOPER config DEBUG_MALLOC bool "Debug memory allocator" depends on USB default n help Select this option if you want to debug the memory allocator. This option logs all uses of the following functions: void free(void *ptr); void *malloc(size_t size); void *calloc(size_t nmemb, size_t size); void *realloc(void *ptr, size_t size); void *memalign(size_t align, size_t size); Say N here unless you are debugging memory allocator problems. endmenu