From 6cfdb3111ff9d4a8a700583243c926feda95263c Mon Sep 17 00:00:00 2001
From: Bernhard Urban <lewurm@gmail.com>
Date: Mon, 30 Jan 2012 11:30:46 +0100
Subject: [PATCH] lspci dump

---
 pciconfig | 358 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 358 insertions(+)
 create mode 100644 pciconfig

diff --git a/pciconfig b/pciconfig
new file mode 100644
index 0000000..929af4c
--- /dev/null
+++ b/pciconfig
@@ -0,0 +1,358 @@
+00:00.0 Host bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
+00:00.0 0600: 1002:5a14 (rev 02)
+	Subsystem: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx0 port B)
+	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
+	Capabilities: <access denied>
+
+00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
+00:02.0 0604: 1002:5a16 (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
+	I/O behind bridge: 0000e000-0000efff
+	Memory behind bridge: fd000000-fe0fffff
+	Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
+00:04.0 0604: 1002:5a18 (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
+	I/O behind bridge: 0000d000-0000dfff
+	Memory behind bridge: fff00000-000fffff
+	Prefetchable memory behind bridge: 00000000d2100000-00000000d21fffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) (prog-if 00 [Normal decode])
+00:05.0 0604: 1002:5a19 (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
+	I/O behind bridge: 0000f000-00000fff
+	Memory behind bridge: fe500000-fe5fffff
+	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) (prog-if 00 [Normal decode])
+00:06.0 0604: 1002:5a1a (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
+	I/O behind bridge: 0000c000-0000cfff
+	Memory behind bridge: fe400000-fe4fffff
+	Prefetchable memory behind bridge: 00000000d2000000-00000000d20fffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) (prog-if 00 [Normal decode])
+00:07.0 0604: 1002:5a1b (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
+	I/O behind bridge: 0000f000-00000fff
+	Memory behind bridge: fe300000-fe3fffff
+	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) (prog-if 00 [Normal decode])
+00:0a.0 0604: 1002:5a1d (prog-if 00 [Normal decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
+	I/O behind bridge: 0000b000-0000bfff
+	Memory behind bridge: fe200000-fe2fffff
+	Prefetchable memory behind bridge: 00000000d2200000-00000000d22fffff
+	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+	Capabilities: <access denied>
+	Kernel driver in use: pcieport
+
+00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
+00:11.0 0106: 1002:4391 (rev 40) (prog-if 01 [AHCI 1.0])
+	Subsystem: ASUSTeK Computer Inc. Device 84dd
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32
+	Interrupt: pin A routed to IRQ 19
+	Region 0: I/O ports at f040 [size=8]
+	Region 1: I/O ports at f030 [size=4]
+	Region 2: I/O ports at f020 [size=8]
+	Region 3: I/O ports at f010 [size=4]
+	Region 4: I/O ports at f000 [size=16]
+	Region 5: Memory at fe607000 (32-bit, non-prefetchable) [size=1K]
+	Capabilities: <access denied>
+	Kernel driver in use: ahci
+
+00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
+00:12.0 0c03: 1002:4397 (prog-if 10 [OHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 18
+	Region 0: Memory at fe606000 (32-bit, non-prefetchable) [size=4K]
+	Kernel driver in use: ohci_hcd
+
+00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
+00:12.2 0c03: 1002:4396 (prog-if 20 [EHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin B routed to IRQ 17
+	Region 0: Memory at fe605000 (32-bit, non-prefetchable) [size=256]
+	Capabilities: <access denied>
+	Kernel driver in use: ehci_hcd
+
+00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
+00:13.0 0c03: 1002:4397 (prog-if 10 [OHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 20
+	Region 0: Memory at fe604000 (32-bit, non-prefetchable) [size=4K]
+	Kernel driver in use: ohci_hcd
+
+00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
+00:13.2 0c03: 1002:4396 (prog-if 20 [EHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin B routed to IRQ 21
+	Region 0: Memory at fe603000 (32-bit, non-prefetchable) [size=256]
+	Capabilities: <access denied>
+	Kernel driver in use: ehci_hcd
+
+00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
+00:14.0 0c05: 1002:4385 (rev 42)
+	Subsystem: ATI Technologies Inc SBx00 SMBus Controller
+	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Kernel driver in use: piix4_smbus
+
+00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
+00:14.3 0601: 1002:439d (rev 40)
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0
+
+00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
+00:14.4 0604: 1002:4384 (rev 40) (prog-if 01 [Subtractive decode])
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 64
+	Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
+	I/O behind bridge: 0000a000-0000afff
+	Memory behind bridge: fe100000-fe1fffff
+	Prefetchable memory behind bridge: fff00000-000fffff
+	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+
+00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
+00:14.5 0c03: 1002:4399 (prog-if 10 [OHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin C routed to IRQ 18
+	Region 0: Memory at fe602000 (32-bit, non-prefetchable) [size=4K]
+	Kernel driver in use: ohci_hcd
+
+00:16.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
+00:16.0 0c03: 1002:4397 (prog-if 10 [OHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 22
+	Region 0: Memory at fe601000 (32-bit, non-prefetchable) [size=4K]
+	Kernel driver in use: ohci_hcd
+
+00:16.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
+00:16.2 0c03: 1002:4396 (prog-if 20 [EHCI])
+	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32, Cache Line Size: 64 bytes
+	Interrupt: pin B routed to IRQ 23
+	Region 0: Memory at fe600000 (32-bit, non-prefetchable) [size=256]
+	Capabilities: <access denied>
+	Kernel driver in use: ehci_hcd
+
+00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
+00:18.0 0600: 1022:1200
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Capabilities: <access denied>
+
+00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
+00:18.1 0600: 1022:1201
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+
+00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
+00:18.2 0600: 1022:1202
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+
+00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
+00:18.3 0600: 1022:1203
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Capabilities: <access denied>
+	Kernel driver in use: k10temp
+
+00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
+00:18.4 0600: 1022:1204
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+
+01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
+01:00.0 0300: 10de:0a65 (rev a2) (prog-if 00 [VGA controller])
+	Subsystem: ASUSTeK Computer Inc. EN210 SILENT
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0
+	Interrupt: pin A routed to IRQ 24
+	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
+	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
+	Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
+	Region 5: I/O ports at e000 [size=128]
+	[virtual] Expansion ROM at fe000000 [disabled] [size=512K]
+	Capabilities: <access denied>
+	Kernel driver in use: nvidia
+
+01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
+01:00.1 0403: 10de:0be3 (rev a1)
+	Subsystem: ASUSTeK Computer Inc. Device 8334
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin B routed to IRQ 25
+	Region 0: Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
+	Capabilities: <access denied>
+	Kernel driver in use: snd_hda_intel
+
+02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
+02:00.0 0200: 10ec:8168 (rev 06)
+	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 86
+	Region 0: I/O ports at d000 [size=256]
+	Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
+	Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
+	Capabilities: <access denied>
+	Kernel driver in use: r8169
+
+03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
+03:00.0 0c03: 1b21:1042 (prog-if 30 [XHCI])
+	Subsystem: ASUSTeK Computer Inc. Device 8488
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 46
+	Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=32K]
+	Capabilities: <access denied>
+	Kernel driver in use: xhci_hcd
+
+04:00.0 SATA controller: JMicron Technology Corp. JMB362 AHCI Controller (rev 10) (prog-if 01 [AHCI 1.0])
+04:00.0 0106: 197b:2362 (rev 10) (prog-if 01 [AHCI 1.0])
+	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 51
+	Region 0: I/O ports at c040 [size=8]
+	Region 1: I/O ports at c030 [size=4]
+	Region 2: I/O ports at c020 [size=8]
+	Region 3: I/O ports at c010 [size=4]
+	Region 4: I/O ports at c000 [size=16]
+	Region 5: Memory at fe410000 (32-bit, non-prefetchable) [size=512]
+	[virtual] Expansion ROM at d2000000 [disabled] [size=64K]
+	Capabilities: <access denied>
+	Kernel driver in use: ahci
+
+05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
+05:00.0 0c03: 1b21:1042 (prog-if 30 [XHCI])
+	Subsystem: ASUSTeK Computer Inc. Device 8488
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 50
+	Region 0: Memory at fe300000 (64-bit, non-prefetchable) [size=32K]
+	Capabilities: <access denied>
+	Kernel driver in use: xhci_hcd
+
+06:00.0 SATA controller: JMicron Technology Corp. JMB362 AHCI Controller (rev 10) (prog-if 01 [AHCI 1.0])
+06:00.0 0106: 197b:2362 (rev 10) (prog-if 01 [AHCI 1.0])
+	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0, Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 47
+	Region 0: I/O ports at b040 [size=8]
+	Region 1: I/O ports at b030 [size=4]
+	Region 2: I/O ports at b020 [size=8]
+	Region 3: I/O ports at b010 [size=4]
+	Region 4: I/O ports at b000 [size=16]
+	Region 5: Memory at fe210000 (32-bit, non-prefetchable) [size=512]
+	[virtual] Expansion ROM at d2200000 [disabled] [size=64K]
+	Capabilities: <access denied>
+	Kernel driver in use: ahci
+
+07:05.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
+07:05.0 0480: 1131:7134 (rev 01)
+	Subsystem: TERRATEC Electronic GmbH Terratec Cinergy 400 TV
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
+	Latency: 32 (63750ns min, 63750ns max)
+	Interrupt: pin A routed to IRQ 20
+	Region 0: Memory at fe101000 (32-bit, non-prefetchable) [size=1K]
+	Capabilities: <access denied>
+	Kernel driver in use: saa7134
+
+07:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
+07:06.0 0c00: 1106:3044 (rev c0) (prog-if 10 [OHCI])
+	Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 32 (8000ns max), Cache Line Size: 64 bytes
+	Interrupt: pin A routed to IRQ 21
+	Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=2K]
+	Region 1: I/O ports at a000 [size=128]
+	Capabilities: <access denied>
+	Kernel driver in use: firewire_ohci
-- 
2.25.1