X-Git-Url: http://wien.tomnetworks.com/gitweb/?p=cacao.git;a=blobdiff_plain;f=src%2Fmm%2Fboehm-gc%2Finclude%2Fgc.h;h=006f5821faa21f8452a7421f0b2f2f26e82f9896;hp=c62b14859e5d05fcaed51a3a5e3e02ba75005330;hb=c9ee016a64e925938f84fcb85521f82febcc4f63;hpb=c83bff94e40ee0a218a39931af17814d1a42cb5c diff --git a/src/mm/boehm-gc/include/gc.h b/src/mm/boehm-gc/include/gc.h index c62b14859..006f5821f 100644 --- a/src/mm/boehm-gc/include/gc.h +++ b/src/mm/boehm-gc/include/gc.h @@ -1,4 +1,4 @@ -/* +/* * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved. * Copyright 1996-1999 by Silicon Graphics. All rights reserved. @@ -26,508 +26,590 @@ * Everything else is best ignored unless you encounter performance * problems. */ - -#ifndef _GC_H -# define _GC_H +#ifndef GC_H +#define GC_H -# include "gc_version.h" - /* Define version numbers here to allow test on build machine */ - /* for cross-builds. Note that this defines the header */ - /* version number, which may or may not match that of the */ - /* dynamic library. The GC_version variable can be used */ - /* to obtain the latter. */ +#include "gc_version.h" + /* Define version numbers here to allow test on build machine */ + /* for cross-builds. Note that this defines the header */ + /* version number, which may or may not match that of the */ + /* dynamic library. GC_get_version() can be used to obtain */ + /* the latter. */ -# include "gc_config_macros.h" +#include "gc_config_macros.h" -# ifdef __cplusplus - extern "C" { -# endif +#ifdef __cplusplus + extern "C" { +#endif -/* Define word and signed_word to be unsigned and signed types of the */ -/* size as char * or void *. There seems to be no way to do this */ -/* even semi-portably. The following is probably no better/worse */ -/* than almost anything else. */ -/* The ANSI standard suggests that size_t and ptrdiff_t might be */ -/* better choices. But those had incorrect definitions on some older */ -/* systems. Notably "typedef int size_t" is WRONG. */ -#ifndef _WIN64 +/* Define word and signed_word to be unsigned and signed types of the */ +/* size as char * or void *. There seems to be no way to do this */ +/* even semi-portably. The following is probably no better/worse */ +/* than almost anything else. */ +/* The ANSI standard suggests that size_t and ptrdiff_t might be */ +/* better choices. But those had incorrect definitions on some older */ +/* systems. Notably "typedef int size_t" is WRONG. */ +#ifdef _WIN64 +# ifdef __int64 + typedef unsigned __int64 GC_word; + typedef __int64 GC_signed_word; +# else + typedef unsigned long long GC_word; + typedef long long GC_signed_word; +# endif +#else typedef unsigned long GC_word; typedef long GC_signed_word; -#else -#ifdef __int64 - typedef unsigned __int64 GC_word; - typedef __int64 GC_signed_word; -#else - typedef unsigned long long GC_word; - typedef long long GC_signed_word; -#endif #endif +/* Get the GC library version. The returned value is in the form: */ +/* ((version_major<<16) | (version_minor<<8) | alpha_version). */ +GC_API unsigned GC_CALL GC_get_version(void); + /* Public read-only variables */ -/* Getter procedures are supplied in some cases and preferred for new */ -/* code. */ +/* The supplied getter functions are preferred for new code. */ -GC_API GC_word GC_gc_no;/* Counter incremented per collection. */ - /* Includes empty GCs at startup. */ +GC_API GC_word GC_gc_no;/* Counter incremented per collection. */ + /* Includes empty GCs at startup. */ GC_API GC_word GC_CALL GC_get_gc_no(void); - -GC_API int GC_parallel; /* GC is parallelized for performance on */ - /* multiprocessors. Currently set only */ - /* implicitly if collector is built with */ - /* -DPARALLEL_MARK and if either: */ - /* Env variable GC_NPROC is set to > 1, or */ - /* GC_NPROC is not set and this is an MP. */ - /* If GC_parallel is set, incremental */ - /* collection is only partially functional, */ - /* and may not be desirable. */ + /* GC_get_gc_no() uses no synchronization, so */ + /* it requires GC_call_with_alloc_lock() to */ + /* avoid data races on multiprocessors. */ + +GC_API int GC_parallel; /* GC is parallelized for performance on */ + /* multiprocessors. Currently set only */ + /* implicitly if collector is built with */ + /* PARALLEL_MARK defined and if either: */ + /* Env variable GC_NPROC is set to > 1, or */ + /* GC_NPROC is not set and this is an MP. */ + /* If GC_parallel is set, incremental */ + /* collection is only partially functional, */ + /* and may not be desirable. */ GC_API int GC_CALL GC_get_parallel(void); - + /* Public R/W variables */ +/* The supplied setter and getter functions are preferred for new code. */ typedef void * (GC_CALLBACK * GC_oom_func)(size_t /* bytes_requested */); GC_API GC_oom_func GC_oom_fn; - /* When there is insufficient memory to satisfy */ - /* an allocation request, we return */ - /* (*GC_oom_fn)(). By default this just */ - /* returns 0. */ - /* If it returns, it must return 0 or a valid */ - /* pointer to a previously allocated heap */ - /* object. */ + /* When there is insufficient memory to satisfy */ + /* an allocation request, we return */ + /* (*GC_oom_fn)(size). By default this just */ + /* returns NULL. */ + /* If it returns, it must return 0 or a valid */ + /* pointer to a previously allocated heap */ + /* object. GC_oom_fn must not be 0. */ + /* Both the supplied setter and the getter */ + /* acquire the GC lock (to avoid data races). */ GC_API void GC_CALL GC_set_oom_fn(GC_oom_func); GC_API GC_oom_func GC_CALL GC_get_oom_fn(void); GC_API int GC_find_leak; - /* Do not actually garbage collect, but simply */ - /* report inaccessible memory that was not */ - /* deallocated with GC_free. Initial value */ - /* is determined by FIND_LEAK macro. */ + /* Do not actually garbage collect, but simply */ + /* report inaccessible memory that was not */ + /* deallocated with GC_free. Initial value */ + /* is determined by FIND_LEAK macro. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_find_leak(int); GC_API int GC_CALL GC_get_find_leak(void); GC_API int GC_all_interior_pointers; - /* Arrange for pointers to object interiors to */ - /* be recognized as valid. May not be changed */ - /* after GC initialization. */ - /* Initial value is determined by */ - /* -DALL_INTERIOR_POINTERS. */ - /* Unless DONT_ADD_BYTE_AT_END is defined, this */ - /* also affects whether sizes are increased by */ - /* at least a byte to allow "off the end" */ - /* pointer recognition. */ - /* MUST BE 0 or 1. */ + /* Arrange for pointers to object interiors to */ + /* be recognized as valid. May not be changed */ + /* after GC initialization. The initial value */ + /* depends on whether the GC is built with */ + /* ALL_INTERIOR_POINTERS macro defined or not. */ + /* Unless DONT_ADD_BYTE_AT_END is defined, this */ + /* also affects whether sizes are increased by */ + /* at least a byte to allow "off the end" */ + /* pointer recognition. */ + /* MUST BE 0 or 1. */ GC_API void GC_CALL GC_set_all_interior_pointers(int); GC_API int GC_CALL GC_get_all_interior_pointers(void); GC_API int GC_finalize_on_demand; - /* If nonzero, finalizers will only be run in */ - /* response to an explicit GC_invoke_finalizers */ - /* call. The default is determined by whether */ - /* the FINALIZE_ON_DEMAND macro is defined */ - /* when the collector is built. */ + /* If nonzero, finalizers will only be run in */ + /* response to an explicit GC_invoke_finalizers */ + /* call. The default is determined by whether */ + /* the FINALIZE_ON_DEMAND macro is defined */ + /* when the collector is built. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_finalize_on_demand(int); GC_API int GC_CALL GC_get_finalize_on_demand(void); GC_API int GC_java_finalization; - /* Mark objects reachable from finalizable */ - /* objects in a separate post-pass. This makes */ - /* it a bit safer to use non-topologically- */ - /* ordered finalization. Default value is */ - /* determined by JAVA_FINALIZATION macro. */ - /* Enables register_finalizer_unreachable to */ - /* work correctly. */ + /* Mark objects reachable from finalizable */ + /* objects in a separate post-pass. This makes */ + /* it a bit safer to use non-topologically- */ + /* ordered finalization. Default value is */ + /* determined by JAVA_FINALIZATION macro. */ + /* Enables register_finalizer_unreachable to */ + /* work correctly. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_java_finalization(int); GC_API int GC_CALL GC_get_java_finalization(void); typedef void (GC_CALLBACK * GC_finalizer_notifier_proc)(void); GC_API GC_finalizer_notifier_proc GC_finalizer_notifier; - /* Invoked by the collector when there are */ - /* objects to be finalized. Invoked at most */ - /* once per GC cycle. Never invoked unless */ - /* GC_finalize_on_demand is set. */ - /* Typically this will notify a finalization */ - /* thread, which will call GC_invoke_finalizers */ - /* in response. */ + /* Invoked by the collector when there are */ + /* objects to be finalized. Invoked at most */ + /* once per GC cycle. Never invoked unless */ + /* GC_finalize_on_demand is set. */ + /* Typically this will notify a finalization */ + /* thread, which will call GC_invoke_finalizers */ + /* in response. May be 0 (means no notifier). */ + /* Both the supplied setter and the getter */ + /* acquire the GC lock (to avoid data races). */ GC_API void GC_CALL GC_set_finalizer_notifier(GC_finalizer_notifier_proc); GC_API GC_finalizer_notifier_proc GC_CALL GC_get_finalizer_notifier(void); -GC_API int GC_dont_gc; /* != 0 ==> Dont collect. In versions 6.2a1+, */ - /* this overrides explicit GC_gcollect() calls. */ - /* Used as a counter, so that nested enabling */ - /* and disabling work correctly. Should */ - /* normally be updated with GC_enable() and */ - /* GC_disable() calls. */ - /* Direct assignment to GC_dont_gc is */ - /* deprecated. */ +GC_API int GC_dont_gc; /* != 0 ==> Don't collect. In versions 6.2a1+, */ + /* this overrides explicit GC_gcollect() calls. */ + /* Used as a counter, so that nested enabling */ + /* and disabling work correctly. Should */ + /* normally be updated with GC_enable() and */ + /* GC_disable() calls. */ + /* Direct assignment to GC_dont_gc is */ + /* deprecated. */ GC_API int GC_dont_expand; - /* Dont expand heap unless explicitly requested */ - /* or forced to. */ + /* Don't expand the heap unless explicitly */ + /* requested or forced to. The setter and */ + /* getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_dont_expand(int); GC_API int GC_CALL GC_get_dont_expand(void); GC_API int GC_use_entire_heap; - /* Causes the non-incremental collector to use the */ - /* entire heap before collecting. This was the only */ - /* option for GC versions < 5.0. This sometimes */ - /* results in more large block fragmentation, since */ - /* very large blocks will tend to get broken up */ - /* during each GC cycle. It is likely to result in a */ - /* larger working set, but lower collection */ - /* frequencies, and hence fewer instructions executed */ - /* in the collector. */ - -GC_API int GC_full_freq; /* Number of partial collections between */ - /* full collections. Matters only if */ - /* GC_incremental is set. */ - /* Full collections are also triggered if */ - /* the collector detects a substantial */ - /* increase in the number of in-use heap */ - /* blocks. Values in the tens are now */ - /* perfectly reasonable, unlike for */ - /* earlier GC versions. */ + /* Causes the non-incremental collector to use the */ + /* entire heap before collecting. This was the only */ + /* option for GC versions < 5.0. This sometimes */ + /* results in more large block fragmentation, since */ + /* very large blocks will tend to get broken up */ + /* during each GC cycle. It is likely to result in a */ + /* larger working set, but lower collection */ + /* frequencies, and hence fewer instructions executed */ + /* in the collector. */ + +GC_API int GC_full_freq; /* Number of partial collections between */ + /* full collections. Matters only if */ + /* GC_incremental is set. */ + /* Full collections are also triggered if */ + /* the collector detects a substantial */ + /* increase in the number of in-use heap */ + /* blocks. Values in the tens are now */ + /* perfectly reasonable, unlike for */ + /* earlier GC versions. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_full_freq(int); GC_API int GC_CALL GC_get_full_freq(void); - + GC_API GC_word GC_non_gc_bytes; - /* Bytes not considered candidates for collection. */ - /* Used only to control scheduling of collections. */ - /* Updated by GC_malloc_uncollectable and GC_free. */ - /* Wizards only. */ + /* Bytes not considered candidates for */ + /* collection. Used only to control scheduling */ + /* of collections. Updated by */ + /* GC_malloc_uncollectable and GC_free. */ + /* Wizards only. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_non_gc_bytes(GC_word); GC_API GC_word GC_CALL GC_get_non_gc_bytes(void); GC_API int GC_no_dls; - /* Don't register dynamic library data segments. */ - /* Wizards only. Should be used only if the */ - /* application explicitly registers all roots. */ - /* In Microsoft Windows environments, this will */ - /* usually also prevent registration of the */ - /* main data segment as part of the root set. */ + /* Don't register dynamic library data segments. */ + /* Wizards only. Should be used only if the */ + /* application explicitly registers all roots. */ + /* In Microsoft Windows environments, this will */ + /* usually also prevent registration of the */ + /* main data segment as part of the root set. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_no_dls(int); GC_API int GC_CALL GC_get_no_dls(void); GC_API GC_word GC_free_space_divisor; - /* We try to make sure that we allocate at */ - /* least N/GC_free_space_divisor bytes between */ - /* collections, where N is twice the number */ - /* of traced bytes, plus the number of untraced */ - /* bytes (bytes in "atomic" objects), plus */ - /* a rough estimate of the root set size. */ - /* N approximates GC tracing work per GC. */ - /* Initially, GC_free_space_divisor = 3. */ - /* Increasing its value will use less space */ - /* but more collection time. Decreasing it */ - /* will appreciably decrease collection time */ - /* at the expense of space. */ + /* We try to make sure that we allocate at */ + /* least N/GC_free_space_divisor bytes between */ + /* collections, where N is twice the number */ + /* of traced bytes, plus the number of untraced */ + /* bytes (bytes in "atomic" objects), plus */ + /* a rough estimate of the root set size. */ + /* N approximates GC tracing work per GC. */ + /* Initially, GC_free_space_divisor = 3. */ + /* Increasing its value will use less space */ + /* but more collection time. Decreasing it */ + /* will appreciably decrease collection time */ + /* at the expense of space. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_free_space_divisor(GC_word); GC_API GC_word GC_CALL GC_get_free_space_divisor(void); GC_API GC_word GC_max_retries; - /* The maximum number of GCs attempted before */ - /* reporting out of memory after heap */ - /* expansion fails. Initially 0. */ + /* The maximum number of GCs attempted before */ + /* reporting out of memory after heap */ + /* expansion fails. Initially 0. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_max_retries(GC_word); GC_API GC_word GC_CALL GC_get_max_retries(void); - - -GC_API char *GC_stackbottom; /* Cool end of user stack. */ - /* May be set in the client prior to */ - /* calling any GC_ routines. This */ - /* avoids some overhead, and */ - /* potentially some signals that can */ - /* confuse debuggers. Otherwise the */ - /* collector attempts to set it */ - /* automatically. */ - /* For multithreaded code, this is the */ - /* cold end of the stack for the */ - /* primordial thread. */ - -GC_API int GC_dont_precollect; /* Don't collect as part of */ - /* initialization. Should be set only */ - /* if the client wants a chance to */ - /* manually initialize the root set */ - /* before the first collection. */ - /* Interferes with blacklisting. */ - /* Wizards only. */ + + +GC_API char *GC_stackbottom; /* Cool end of user stack. */ + /* May be set in the client prior to */ + /* calling any GC_ routines. This */ + /* avoids some overhead, and */ + /* potentially some signals that can */ + /* confuse debuggers. Otherwise the */ + /* collector attempts to set it */ + /* automatically. */ + /* For multithreaded code, this is the */ + /* cold end of the stack for the */ + /* primordial thread. */ + +GC_API int GC_dont_precollect; /* Don't collect as part of */ + /* initialization. Should be set only */ + /* if the client wants a chance to */ + /* manually initialize the root set */ + /* before the first collection. */ + /* Interferes with blacklisting. */ + /* Wizards only. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_dont_precollect(int); GC_API int GC_CALL GC_get_dont_precollect(void); GC_API unsigned long GC_time_limit; - /* If incremental collection is enabled, */ - /* We try to terminate collections */ - /* after this many milliseconds. Not a */ - /* hard time bound. Setting this to */ - /* GC_TIME_UNLIMITED will essentially */ - /* disable incremental collection while */ - /* leaving generational collection */ - /* enabled. */ -# define GC_TIME_UNLIMITED 999999 - /* Setting GC_time_limit to this value */ - /* will disable the "pause time exceeded"*/ - /* tests. */ + /* If incremental collection is enabled, */ + /* We try to terminate collections */ + /* after this many milliseconds. Not a */ + /* hard time bound. Setting this to */ + /* GC_TIME_UNLIMITED will essentially */ + /* disable incremental collection while */ + /* leaving generational collection */ + /* enabled. */ +#define GC_TIME_UNLIMITED 999999 + /* Setting GC_time_limit to this value */ + /* will disable the "pause time exceeded"*/ + /* tests. */ + /* The setter and getter are unsynchronized, so */ + /* GC_call_with_alloc_lock() is required to */ + /* avoid data races (if the value is modified */ + /* after the GC is put to multi-threaded mode). */ GC_API void GC_CALL GC_set_time_limit(unsigned long); GC_API unsigned long GC_CALL GC_get_time_limit(void); /* Public procedures */ -/* Initialize the collector. Portable clients should call GC_INIT() from - * the main program instead. - */ +/* Initialize the collector. Portable clients should call GC_INIT() */ +/* from the main program instead. */ GC_API void GC_CALL GC_init(void); -/* - * general purpose allocation routines, with roughly malloc calling conv. - * The atomic versions promise that no relevant pointers are contained - * in the object. The non-atomic versions guarantee that the new object - * is cleared. GC_malloc_stubborn promises that no changes to the object - * will occur after GC_end_stubborn_change has been called on the - * result of GC_malloc_stubborn. GC_malloc_uncollectable allocates an object - * that is scanned for pointers to collectable objects, but is not itself - * collectable. The object is scanned even if it does not appear to - * be reachable. GC_malloc_uncollectable and GC_free called on the resulting - * object implicitly update GC_non_gc_bytes appropriately. - * - * Note that the GC_malloc_stubborn support doesn't really - * exist anymore. MANUAL_VDB provides comparable functionality. - */ -GC_API void * GC_CALL GC_malloc(size_t size_in_bytes); -GC_API void * GC_CALL GC_malloc_atomic(size_t size_in_bytes); -GC_API char * GC_CALL GC_strdup (const char *str); -GC_API void * GC_CALL GC_malloc_uncollectable(size_t size_in_bytes); -GC_API void * GC_CALL GC_malloc_stubborn(size_t size_in_bytes); - -/* GC_memalign() is not well tested. */ -GC_API void * GC_CALL GC_memalign(size_t align, size_t lb); - -/* The following is only defined if the library has been suitably */ -/* compiled: */ -GC_API void * GC_CALL GC_malloc_atomic_uncollectable(size_t size_in_bytes); +/* General purpose allocation routines, with roughly malloc calling */ +/* conv. The atomic versions promise that no relevant pointers are */ +/* contained in the object. The non-atomic versions guarantee that the */ +/* new object is cleared. GC_malloc_stubborn promises that no changes */ +/* to the object will occur after GC_end_stubborn_change has been */ +/* called on the result of GC_malloc_stubborn. GC_malloc_uncollectable */ +/* allocates an object that is scanned for pointers to collectable */ +/* objects, but is not itself collectable. The object is scanned even */ +/* if it does not appear to be reachable. GC_malloc_uncollectable and */ +/* GC_free called on the resulting object implicitly update */ +/* GC_non_gc_bytes appropriately. */ +/* Note that the GC_malloc_stubborn support doesn't really exist */ +/* anymore. MANUAL_VDB provides comparable functionality. */ +GC_API void * GC_CALL GC_malloc(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_atomic(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API char * GC_CALL GC_strdup(const char *) GC_ATTR_MALLOC; +GC_API void * GC_CALL GC_malloc_uncollectable(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_stubborn(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); + +/* GC_memalign() is not well tested. */ +GC_API void * GC_CALL GC_memalign(size_t /* align */, size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(2); + +/* The following is only defined if the library has been suitably */ +/* compiled: */ +GC_API void * GC_CALL GC_malloc_atomic_uncollectable( + size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); /* Explicitly deallocate an object. Dangerous if used incorrectly. */ -/* Requires a pointer to the base of an object. */ +/* Requires a pointer to the base of an object. */ /* If the argument is stubborn, it should not be changeable when freed. */ -/* An object should not be enabled for finalization when it is */ -/* explicitly deallocated. */ -/* GC_free(0) is a no-op, as required by ANSI C for free. */ -GC_API void GC_CALL GC_free(void * object_addr); - -/* - * Stubborn objects may be changed only if the collector is explicitly informed. - * The collector is implicitly informed of coming change when such - * an object is first allocated. The following routines inform the - * collector that an object will no longer be changed, or that it will - * once again be changed. Only non-NULL pointer stores into the object - * are considered to be changes. The argument to GC_end_stubborn_change - * must be exactly the value returned by GC_malloc_stubborn or passed to - * GC_change_stubborn. (In the second case it may be an interior pointer - * within 512 bytes of the beginning of the objects.) - * There is a performance penalty for allowing more than - * one stubborn object to be changed at once, but it is acceptable to - * do so. The same applies to dropping stubborn objects that are still - * changeable. - */ +/* An object should not be enabled for finalization when it is */ +/* explicitly deallocated. */ +/* GC_free(0) is a no-op, as required by ANSI C for free. */ +GC_API void GC_CALL GC_free(void *); + +/* Stubborn objects may be changed only if the collector is explicitly */ +/* informed. The collector is implicitly informed of coming change */ +/* when such an object is first allocated. The following routines */ +/* inform the collector that an object will no longer be changed, or */ +/* that it will once again be changed. Only non-NULL pointer stores */ +/* into the object are considered to be changes. The argument to */ +/* GC_end_stubborn_change must be exactly the value returned by */ +/* GC_malloc_stubborn or passed to GC_change_stubborn. (In the second */ +/* case, it may be an interior pointer within 512 bytes of the */ +/* beginning of the objects.) There is a performance penalty for */ +/* allowing more than one stubborn object to be changed at once, but it */ +/* is acceptable to do so. The same applies to dropping stubborn */ +/* objects that are still changeable. */ GC_API void GC_CALL GC_change_stubborn(void *); GC_API void GC_CALL GC_end_stubborn_change(void *); -/* Return a pointer to the base (lowest address) of an object given */ -/* a pointer to a location within the object. */ -/* I.e. map an interior pointer to the corresponding bas pointer. */ -/* Note that with debugging allocation, this returns a pointer to the */ -/* actual base of the object, i.e. the debug information, not to */ -/* the base of the user object. */ -/* Return 0 if displaced_pointer doesn't point to within a valid */ -/* object. */ -/* Note that a deallocated object in the garbage collected heap */ -/* may be considered valid, even if it has been deallocated with */ -/* GC_free. */ -GC_API void * GC_CALL GC_base(void * displaced_pointer); - -/* Given a pointer to the base of an object, return its size in bytes. */ -/* The returned size may be slightly larger than what was originally */ -/* requested. */ -GC_API size_t GC_CALL GC_size(void * object_addr); - -/* For compatibility with C library. This is occasionally faster than */ -/* a malloc followed by a bcopy. But if you rely on that, either here */ -/* or with the standard C library, your code is broken. In my */ -/* opinion, it shouldn't have been invented, but now we're stuck. -HB */ -/* The resulting object has the same kind as the original. */ -/* If the argument is stubborn, the result will have changes enabled. */ -/* It is an error to have changes enabled for the original object. */ -/* Follows ANSI conventions for NULL old_object. */ -GC_API void * GC_CALL GC_realloc(void * old_object, size_t new_size_in_bytes); - -/* Explicitly increase the heap size. */ +/* Return a pointer to the base (lowest address) of an object given */ +/* a pointer to a location within the object. */ +/* I.e. map an interior pointer to the corresponding bas pointer. */ +/* Note that with debugging allocation, this returns a pointer to the */ +/* actual base of the object, i.e. the debug information, not to */ +/* the base of the user object. */ +/* Return 0 if displaced_pointer doesn't point to within a valid */ +/* object. */ +/* Note that a deallocated object in the garbage collected heap */ +/* may be considered valid, even if it has been deallocated with */ +/* GC_free. */ +GC_API void * GC_CALL GC_base(void * /* displaced_pointer */); + +/* Given a pointer to the base of an object, return its size in bytes. */ +/* The returned size may be slightly larger than what was originally */ +/* requested. */ +GC_API size_t GC_CALL GC_size(const void * /* object_addr */); + +/* For compatibility with C library. This is occasionally faster than */ +/* a malloc followed by a bcopy. But if you rely on that, either here */ +/* or with the standard C library, your code is broken. In my */ +/* opinion, it shouldn't have been invented, but now we're stuck. -HB */ +/* The resulting object has the same kind as the original. */ +/* If the argument is stubborn, the result will have changes enabled. */ +/* It is an error to have changes enabled for the original object. */ +/* Follows ANSI conventions for NULL old_object. */ +GC_API void * GC_CALL GC_realloc(void * /* old_object */, + size_t /* new_size_in_bytes */) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); + +/* Explicitly increase the heap size. */ /* Returns 0 on failure, 1 on success. */ -GC_API int GC_CALL GC_expand_hp(size_t number_of_bytes); +GC_API int GC_CALL GC_expand_hp(size_t /* number_of_bytes */); -/* Limit the heap size to n bytes. Useful when you're debugging, */ -/* especially on systems that don't handle running out of memory well. */ -/* n == 0 ==> unbounded. This is the default. */ -GC_API void GC_CALL GC_set_max_heap_size(GC_word n); +/* Limit the heap size to n bytes. Useful when you're debugging, */ +/* especially on systems that don't handle running out of memory well. */ +/* n == 0 ==> unbounded. This is the default. */ +GC_API void GC_CALL GC_set_max_heap_size(GC_word /* n */); -/* Inform the collector that a certain section of statically allocated */ -/* memory contains no pointers to garbage collected memory. Thus it */ +/* Inform the collector that a certain section of statically allocated */ +/* memory contains no pointers to garbage collected memory. Thus it */ /* need not be scanned. This is sometimes important if the application */ -/* maps large read/write files into the address space, which could be */ -/* mistaken for dynamic library data segments on some systems. */ -GC_API void GC_CALL GC_exclude_static_roots(void * low_address, - void * high_address_plus_1); - -/* Clear the set of root segments. Wizards only. */ +/* maps large read/write files into the address space, which could be */ +/* mistaken for dynamic library data segments on some systems. */ +/* The section (referred to by low_address) must be pointer-aligned. */ +/* low_address must not be greater than high_address_plus_1. */ +GC_API void GC_CALL GC_exclude_static_roots(void * /* low_address */, + void * /* high_address_plus_1 */); + +/* Clear the set of root segments. Wizards only. */ GC_API void GC_CALL GC_clear_roots(void); -/* Add a root segment. Wizards only. */ -GC_API void GC_CALL GC_add_roots(void * low_address, - void * high_address_plus_1); +/* Add a root segment. Wizards only. */ +/* The segment (referred to by low_address) must be pointer-aligned. */ +/* low_address must not be greater than high_address_plus_1. */ +GC_API void GC_CALL GC_add_roots(void * /* low_address */, + void * /* high_address_plus_1 */); -/* Remove a root segment. Wizards only. */ -GC_API void GC_CALL GC_remove_roots(void * low_address, - void * high_address_plus_1); +/* Remove a root segment. Wizards only. */ +/* May be unimplemented on some platforms. */ +GC_API void GC_CALL GC_remove_roots(void * /* low_address */, + void * /* high_address_plus_1 */); -/* Add a displacement to the set of those considered valid by the */ +/* Add a displacement to the set of those considered valid by the */ /* collector. GC_register_displacement(n) means that if p was returned */ -/* by GC_malloc, then (char *)p + n will be considered to be a valid */ -/* pointer to p. N must be small and less than the size of p. */ -/* (All pointers to the interior of objects from the stack are */ -/* considered valid in any case. This applies to heap objects and */ -/* static data.) */ -/* Preferably, this should be called before any other GC procedures. */ -/* Calling it later adds to the probability of excess memory */ -/* retention. */ -/* This is a no-op if the collector has recognition of */ -/* arbitrary interior pointers enabled, which is now the default. */ -GC_API void GC_CALL GC_register_displacement(size_t n); - -/* The following version should be used if any debugging allocation is */ -/* being done. */ -GC_API void GC_CALL GC_debug_register_displacement(size_t n); - -/* Explicitly trigger a full, world-stop collection. */ +/* by GC_malloc, then (char *)p + n will be considered to be a valid */ +/* pointer to p. N must be small and less than the size of p. */ +/* (All pointers to the interior of objects from the stack are */ +/* considered valid in any case. This applies to heap objects and */ +/* static data.) */ +/* Preferably, this should be called before any other GC procedures. */ +/* Calling it later adds to the probability of excess memory */ +/* retention. */ +/* This is a no-op if the collector has recognition of */ +/* arbitrary interior pointers enabled, which is now the default. */ +GC_API void GC_CALL GC_register_displacement(size_t /* n */); + +/* The following version should be used if any debugging allocation is */ +/* being done. */ +GC_API void GC_CALL GC_debug_register_displacement(size_t /* n */); + +/* Explicitly trigger a full, world-stop collection. */ GC_API void GC_CALL GC_gcollect(void); -/* Trigger a full world-stopped collection. Abort the collection if */ -/* and when stop_func returns a nonzero value. Stop_func will be */ -/* called frequently, and should be reasonably fast. This works even */ -/* if virtual dirty bits, and hence incremental collection is not */ -/* available for this architecture. Collections can be aborted faster */ -/* than normal pause times for incremental collection. However, */ -/* aborted collections do no useful work; the next collection needs */ -/* to start from the beginning. */ -/* Return 0 if the collection was aborted, 1 if it succeeded. */ +/* Same as above but ignores the default stop_func setting and tries to */ +/* unmap as much memory as possible (regardless of the corresponding */ +/* switch setting). The recommended usage: on receiving a system */ +/* low-memory event; before retrying a system call failed because of */ +/* the system is running out of resources. */ +GC_API void GC_CALL GC_gcollect_and_unmap(void); + +/* Trigger a full world-stopped collection. Abort the collection if */ +/* and when stop_func returns a nonzero value. Stop_func will be */ +/* called frequently, and should be reasonably fast. (stop_func is */ +/* called with the allocation lock held and the world might be stopped; */ +/* it's not allowed for stop_func to manipulate pointers to the garbage */ +/* collected heap or call most of GC functions.) This works even */ +/* if virtual dirty bits, and hence incremental collection is not */ +/* available for this architecture. Collections can be aborted faster */ +/* than normal pause times for incremental collection. However, */ +/* aborted collections do no useful work; the next collection needs */ +/* to start from the beginning. stop_func must not be 0. */ +/* GC_try_to_collect() returns 0 if the collection was aborted (or the */ +/* collections are disabled), 1 if it succeeded. */ typedef int (GC_CALLBACK * GC_stop_func)(void); -GC_API int GC_CALL GC_try_to_collect(GC_stop_func stop_func); - -/* Return the number of bytes in the heap. Excludes collector private */ -/* data structures. Excludes the unmapped memory (retuned to the OS). */ -/* Includes empty blocks and fragmentation loss. Includes some pages */ -/* that were allocated but never written. */ +GC_API int GC_CALL GC_try_to_collect(GC_stop_func /* stop_func */); + +/* Set and get the default stop_func. The default stop_func is used by */ +/* GC_gcollect() and by implicitly trigged collections (except for the */ +/* case when handling out of memory). Must not be 0. */ +GC_API void GC_CALL GC_set_stop_func(GC_stop_func /* stop_func */); +GC_API GC_stop_func GC_CALL GC_get_stop_func(void); + +/* Return the number of bytes in the heap. Excludes collector private */ +/* data structures. Excludes the unmapped memory (retuned to the OS). */ +/* Includes empty blocks and fragmentation loss. Includes some pages */ +/* that were allocated but never written. */ GC_API size_t GC_CALL GC_get_heap_size(void); -/* Return a lower bound on the number of free bytes in the heap */ -/* (excluding the unmapped memory space). */ +/* Return a lower bound on the number of free bytes in the heap */ +/* (excluding the unmapped memory space). */ GC_API size_t GC_CALL GC_get_free_bytes(void); -/* Return the size (in bytes) of the unmapped memory (which is returned */ -/* to the OS but could be remapped back by the collector later unless */ -/* the OS runs out of system/virtual memory). */ +/* Return the size (in bytes) of the unmapped memory (which is returned */ +/* to the OS but could be remapped back by the collector later unless */ +/* the OS runs out of system/virtual memory). */ GC_API size_t GC_CALL GC_get_unmapped_bytes(void); -/* Return the number of bytes allocated since the last collection. */ +/* Return the number of bytes allocated since the last collection. */ GC_API size_t GC_CALL GC_get_bytes_since_gc(void); -/* Return the total number of bytes allocated in this process. */ -/* Never decreases, except due to wrapping. */ +/* Return the total number of bytes allocated in this process. */ +/* Never decreases, except due to wrapping. */ GC_API size_t GC_CALL GC_get_total_bytes(void); -/* Disable garbage collection. Even GC_gcollect calls will be */ -/* ineffective. */ +/* Return the signal number used by the garbage collector to suspend */ +/* threads on POSIX systems. Return -1 otherwise. Exported only if */ +/* the library has been compiled with threads support (GC_THREADS). */ +GC_API int GC_CALL GC_get_suspend_signal(void); + +/* Disable garbage collection. Even GC_gcollect calls will be */ +/* ineffective. */ GC_API void GC_CALL GC_disable(void); -/* Re-enable garbage collection. GC_disable() and GC_enable() calls */ -/* nest. Garbage collection is enabled if the number of calls to both */ -/* both functions is equal. */ +/* Re-enable garbage collection. GC_disable() and GC_enable() calls */ +/* nest. Garbage collection is enabled if the number of calls to both */ +/* both functions is equal. */ GC_API void GC_CALL GC_enable(void); -/* Enable incremental/generational collection. */ -/* Not advisable unless dirty bits are */ -/* available or most heap objects are */ -/* pointer-free (atomic) or immutable. */ -/* Don't use in leak finding mode. */ -/* Ignored if GC_dont_gc is true. */ -/* Only the generational piece of this is */ -/* functional if GC_parallel is TRUE */ -/* or if GC_time_limit is GC_TIME_UNLIMITED. */ -/* Causes thread-local variant of GC_gcj_malloc() to revert to */ -/* locked allocation. Must be called before any such */ -/* GC_gcj_malloc() calls. */ -/* For best performance, should be called as early as possible. */ -/* On some platforms, calling it later may have adverse effects.*/ -/* Safe to call before GC_INIT(). Includes a GC_init() call. */ +/* Enable incremental/generational collection. Not advisable unless */ +/* dirty bits are available or most heap objects are pointer-free */ +/* (atomic) or immutable. Don't use in leak finding mode. Ignored if */ +/* GC_dont_gc is true. Only the generational piece of this is */ +/* functional if GC_parallel is TRUE or if GC_time_limit is */ +/* GC_TIME_UNLIMITED. Causes thread-local variant of GC_gcj_malloc() */ +/* to revert to locked allocation. Must be called before any such */ +/* GC_gcj_malloc() calls. For best performance, should be called as */ +/* early as possible. On some platforms, calling it later may have */ +/* adverse effects. */ +/* Safe to call before GC_INIT(). Includes a GC_init() call. */ GC_API void GC_CALL GC_enable_incremental(void); -/* Does incremental mode write-protect pages? Returns zero or */ -/* more of the following, or'ed together: */ -#define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */ +/* Does incremental mode write-protect pages? Returns zero or */ +/* more of the following, or'ed together: */ +#define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */ #define GC_PROTECTS_PTRFREE_HEAP 2 -#define GC_PROTECTS_STATIC_DATA 4 /* Currently never. */ -#define GC_PROTECTS_STACK 8 /* Probably impractical. */ +#define GC_PROTECTS_STATIC_DATA 4 /* Currently never. */ +#define GC_PROTECTS_STACK 8 /* Probably impractical. */ #define GC_PROTECTS_NONE 0 GC_API int GC_CALL GC_incremental_protection_needs(void); -/* Perform some garbage collection work, if appropriate. */ -/* Return 0 if there is no more work to be done. */ -/* Typically performs an amount of work corresponding roughly */ -/* to marking from one page. May do more work if further */ -/* progress requires it, e.g. if incremental collection is */ -/* disabled. It is reasonable to call this in a wait loop */ -/* until it returns 0. */ +/* Perform some garbage collection work, if appropriate. */ +/* Return 0 if there is no more work to be done. */ +/* Typically performs an amount of work corresponding roughly */ +/* to marking from one page. May do more work if further */ +/* progress requires it, e.g. if incremental collection is */ +/* disabled. It is reasonable to call this in a wait loop */ +/* until it returns 0. */ GC_API int GC_CALL GC_collect_a_little(void); -/* Allocate an object of size lb bytes. The client guarantees that */ -/* as long as the object is live, it will be referenced by a pointer */ -/* that points to somewhere within the first 256 bytes of the object. */ -/* (This should normally be declared volatile to prevent the compiler */ -/* from invalidating this assertion.) This routine is only useful */ -/* if a large array is being allocated. It reduces the chance of */ -/* accidentally retaining such an array as a result of scanning an */ -/* integer that happens to be an address inside the array. (Actually, */ -/* it reduces the chance of the allocator not finding space for such */ -/* an array, since it will try hard to avoid introducing such a false */ +/* Allocate an object of size lb bytes. The client guarantees that */ +/* as long as the object is live, it will be referenced by a pointer */ +/* that points to somewhere within the first 256 bytes of the object. */ +/* (This should normally be declared volatile to prevent the compiler */ +/* from invalidating this assertion.) This routine is only useful */ +/* if a large array is being allocated. It reduces the chance of */ +/* accidentally retaining such an array as a result of scanning an */ +/* integer that happens to be an address inside the array. (Actually, */ +/* it reduces the chance of the allocator not finding space for such */ +/* an array, since it will try hard to avoid introducing such a false */ /* reference.) On a SunOS 4.X or MS Windows system this is recommended */ -/* for arrays likely to be larger than 100K or so. For other systems, */ -/* or if the collector is not configured to recognize all interior */ -/* pointers, the threshold is normally much higher. */ -GC_API void * GC_CALL GC_malloc_ignore_off_page(size_t lb); -GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t lb); +/* for arrays likely to be larger than 100K or so. For other systems, */ +/* or if the collector is not configured to recognize all interior */ +/* pointers, the threshold is normally much higher. */ +GC_API void * GC_CALL GC_malloc_ignore_off_page(size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t /* lb */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); #if defined(__sgi) && !defined(__GNUC__) && _COMPILER_VERSION >= 720 -# define GC_ADD_CALLER -# define GC_RETURN_ADDR (GC_word)__return_address +# define GC_ADD_CALLER +# define GC_RETURN_ADDR (GC_word)__return_address #endif #if defined(__linux__) || defined(__GLIBC__) # include # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \ - && !defined(__ia64__) && !defined(__UCLIBC__) -# ifndef GC_HAVE_BUILTIN_BACKTRACE -# define GC_HAVE_BUILTIN_BACKTRACE -# endif + && !defined(__ia64__) && !defined(__UCLIBC__) \ + && !defined(GC_HAVE_BUILTIN_BACKTRACE) +# define GC_HAVE_BUILTIN_BACKTRACE # endif # if defined(__i386__) || defined(__x86_64__) # define GC_CAN_SAVE_CALL_STACKS # endif #endif -#if defined(_MSC_VER) && _MSC_VER >= 1200 /* version 12.0+ (MSVC 6.0+) */ \ - && !defined(_AMD64_) -# ifndef GC_HAVE_NO_BUILTIN_BACKTRACE -# define GC_HAVE_BUILTIN_BACKTRACE -# endif +#if defined(_MSC_VER) && _MSC_VER >= 1200 /* version 12.0+ (MSVC 6.0+) */ \ + && !defined(_AMD64_) && !defined(GC_HAVE_NO_BUILTIN_BACKTRACE) \ + && !defined(_WIN32_WCE) && !defined(GC_HAVE_BUILTIN_BACKTRACE) +# define GC_HAVE_BUILTIN_BACKTRACE #endif #if defined(GC_HAVE_BUILTIN_BACKTRACE) && !defined(GC_CAN_SAVE_CALL_STACKS) @@ -535,22 +617,23 @@ GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t lb); #endif #if defined(__sparc__) -# define GC_CAN_SAVE_CALL_STACKS +# define GC_CAN_SAVE_CALL_STACKS #endif -/* If we're on an a platform on which we can't save call stacks, but */ -/* gcc is normally used, we go ahead and define GC_ADD_CALLER. */ -/* We make this decision independent of whether gcc is actually being */ -/* used, in order to keep the interface consistent, and allow mixing */ -/* of compilers. */ -/* This may also be desirable if it is possible but expensive to */ -/* retrieve the call chain. */ +/* If we're on an a platform on which we can't save call stacks, but */ +/* gcc is normally used, we go ahead and define GC_ADD_CALLER. */ +/* We make this decision independent of whether gcc is actually being */ +/* used, in order to keep the interface consistent, and allow mixing */ +/* of compilers. */ +/* This may also be desirable if it is possible but expensive to */ +/* retrieve the call chain. */ #if (defined(__linux__) || defined(__NetBSD__) || defined(__OpenBSD__) \ - || defined(__FreeBSD__) || defined(__DragonFly__)) & !defined(GC_CAN_SAVE_CALL_STACKS) + || defined(__FreeBSD__) || defined(__DragonFly__)) \ + && !defined(GC_CAN_SAVE_CALL_STACKS) # define GC_ADD_CALLER -# if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95) +# if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95) /* gcc knows how to retrieve return address, but we don't know */ - /* how to generate call stacks. */ + /* how to generate call stacks. */ # define GC_RETURN_ADDR (GC_word)__builtin_return_address(0) # else /* Just pass 0 for gcc compatibility. */ @@ -559,668 +642,805 @@ GC_API void * GC_CALL GC_malloc_atomic_ignore_off_page(size_t lb); #endif #ifdef GC_ADD_CALLER -# define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__ -# define GC_EXTRA_PARAMS GC_word ra, const char * s, int i +# define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__ +# define GC_EXTRA_PARAMS GC_word ra, const char * s, int i #else -# define GC_EXTRAS __FILE__, __LINE__ -# define GC_EXTRA_PARAMS const char * s, int i +# define GC_EXTRAS __FILE__, __LINE__ +# define GC_EXTRA_PARAMS const char * s, int i #endif -/* Debugging (annotated) allocation. GC_gcollect will check */ -/* objects allocated in this way for overwrites, etc. */ -GC_API void * GC_CALL GC_debug_malloc(size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API void * GC_CALL GC_debug_malloc_atomic - (size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API char * GC_CALL GC_debug_strdup(const char *str, GC_EXTRA_PARAMS); -GC_API void * GC_CALL GC_debug_malloc_uncollectable - (size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API void * GC_CALL GC_debug_malloc_stubborn - (size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API void * GC_CALL GC_debug_malloc_ignore_off_page - (size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API void * GC_CALL GC_debug_malloc_atomic_ignore_off_page - (size_t size_in_bytes, GC_EXTRA_PARAMS); -GC_API void GC_CALL GC_debug_free (void * object_addr); -GC_API void * GC_CALL GC_debug_realloc - (void * old_object, size_t new_size_in_bytes, GC_EXTRA_PARAMS); +/* Debugging (annotated) allocation. GC_gcollect will check */ +/* objects allocated in this way for overwrites, etc. */ +GC_API void * GC_CALL GC_debug_malloc(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_atomic(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API char * GC_CALL GC_debug_strdup(const char *, + GC_EXTRA_PARAMS) GC_ATTR_MALLOC; +GC_API void * GC_CALL GC_debug_malloc_uncollectable( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_stubborn(size_t /* size_in_bytes */, + GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_ignore_off_page( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_malloc_atomic_ignore_off_page( + size_t /* size_in_bytes */, GC_EXTRA_PARAMS) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void GC_CALL GC_debug_free(void *); +GC_API void * GC_CALL GC_debug_realloc(void * /* old_object */, + size_t /* new_size_in_bytes */, GC_EXTRA_PARAMS) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); GC_API void GC_CALL GC_debug_change_stubborn(void *); GC_API void GC_CALL GC_debug_end_stubborn_change(void *); -/* Routines that allocate objects with debug information (like the */ -/* above), but just fill in dummy file and line number information. */ -/* Thus they can serve as drop-in malloc/realloc replacements. This */ -/* can be useful for two reasons: */ -/* 1) It allows the collector to be built with DBG_HDRS_ALL defined */ -/* even if some allocation calls come from 3rd party libraries */ -/* that can't be recompiled. */ -/* 2) On some platforms, the file and line information is redundant, */ -/* since it can be reconstructed from a stack trace. On such */ -/* platforms it may be more convenient not to recompile, e.g. for */ -/* leak detection. This can be accomplished by instructing the */ -/* linker to replace malloc/realloc with these. */ -GC_API void * GC_CALL GC_debug_malloc_replacement (size_t size_in_bytes); -GC_API void * GC_CALL GC_debug_realloc_replacement - (void * object_addr, size_t size_in_bytes); - -# ifdef GC_DEBUG -# define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS) -# define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS) -# define GC_STRDUP(s) GC_debug_strdup((s), GC_EXTRAS) -# define GC_MALLOC_UNCOLLECTABLE(sz) \ - GC_debug_malloc_uncollectable(sz, GC_EXTRAS) -# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ - GC_debug_malloc_ignore_off_page(sz, GC_EXTRAS) -# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ - GC_debug_malloc_atomic_ignore_off_page(sz, GC_EXTRAS) -# define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS) -# define GC_FREE(p) GC_debug_free(p) -# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ - GC_debug_register_finalizer(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ - GC_debug_register_finalizer_ignore_self(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ - GC_debug_register_finalizer_no_order(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ - GC_debug_register_finalizer_unreachable(p, f, d, of, od) -# define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS); -# define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p) -# define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p) -# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ - GC_general_register_disappearing_link(link, GC_base(obj)) -# define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n) -# else -# define GC_MALLOC(sz) GC_malloc(sz) -# define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz) -# define GC_STRDUP(s) GC_strdup(s) -# define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz) -# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ - GC_malloc_ignore_off_page(sz) -# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ - GC_malloc_atomic_ignore_off_page(sz) -# define GC_REALLOC(old, sz) GC_realloc(old, sz) -# define GC_FREE(p) GC_free(p) -# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ - GC_register_finalizer(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ - GC_register_finalizer_ignore_self(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ - GC_register_finalizer_no_order(p, f, d, of, od) -# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ - GC_register_finalizer_unreachable(p, f, d, of, od) -# define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz) -# define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p) -# define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p) -# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ - GC_general_register_disappearing_link(link, obj) -# define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n) -# endif -/* The following are included because they are often convenient, and */ -/* reduce the chance for a misspecified size argument. But calls may */ -/* expand to something syntactically incorrect if t is a complicated */ -/* type expression. */ -# define GC_NEW(t) (t *)GC_MALLOC(sizeof (t)) -# define GC_NEW_ATOMIC(t) (t *)GC_MALLOC_ATOMIC(sizeof (t)) -# define GC_NEW_STUBBORN(t) (t *)GC_MALLOC_STUBBORN(sizeof (t)) -# define GC_NEW_UNCOLLECTABLE(t) (t *)GC_MALLOC_UNCOLLECTABLE(sizeof (t)) - -/* Finalization. Some of these primitives are grossly unsafe. */ -/* The idea is to make them both cheap, and sufficient to build */ -/* a safer layer, closer to Modula-3, Java, or PCedar finalization. */ -/* The interface represents my conclusions from a long discussion */ -/* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */ -/* Christian Jacobi, and Russ Atkinson. It's not perfect, and */ -/* probably nobody else agrees with it. Hans-J. Boehm 3/13/92 */ -typedef void (GC_CALLBACK * GC_finalization_proc) (void * obj, - void * client_data); - -GC_API void GC_CALL GC_register_finalizer(void * obj, GC_finalization_proc fn, - void * cd, GC_finalization_proc *ofn, - void * *ocd); -GC_API void GC_CALL GC_debug_register_finalizer - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); - /* When obj is no longer accessible, invoke */ - /* (*fn)(obj, cd). If a and b are inaccessible, and */ - /* a points to b (after disappearing links have been */ - /* made to disappear), then only a will be */ - /* finalized. (If this does not create any new */ - /* pointers to b, then b will be finalized after the */ - /* next collection.) Any finalizable object that */ - /* is reachable from itself by following one or more */ - /* pointers will not be finalized (or collected). */ - /* Thus cycles involving finalizable objects should */ - /* be avoided, or broken by disappearing links. */ - /* All but the last finalizer registered for an object */ - /* is ignored. */ - /* Finalization may be removed by passing 0 as fn. */ - /* Finalizers are implicitly unregistered when they are */ - /* enqueued for finalization (i.e. become ready to be */ - /* finalized). */ - /* The old finalizer and client data are stored in */ - /* *ofn and *ocd. (ofn and/or ocd may be NULL. */ - /* The allocation lock is held while *ofn and *ocd are */ - /* updated. In case of error (no memory to register */ - /* new finalizer), *ofn and *ocd remain unchanged.) */ - /* Fn is never invoked on an accessible object, */ - /* provided hidden pointers are converted to real */ - /* pointers only if the allocation lock is held, and */ - /* such conversions are not performed by finalization */ - /* routines. */ - /* If GC_register_finalizer is aborted as a result of */ - /* a signal, the object may be left with no */ - /* finalization, even if neither the old nor new */ - /* finalizer were NULL. */ - /* Obj should be the starting address of an object */ - /* allocated by GC_malloc or friends. Obj may also be */ - /* NULL or point to something outside GC heap (in this */ - /* case, fn is ignored, *ofn and *ocd are set to NULL). */ - /* Note that any garbage collectable object referenced */ - /* by cd will be considered accessible until the */ - /* finalizer is invoked. */ - -/* Another versions of the above follow. It ignores */ -/* self-cycles, i.e. pointers from a finalizable object to */ -/* itself. There is a stylistic argument that this is wrong, */ -/* but it's unavoidable for C++, since the compiler may */ -/* silently introduce these. It's also benign in that specific */ -/* case. And it helps if finalizable objects are split to */ -/* avoid cycles. */ -/* Note that cd will still be viewed as accessible, even if it */ -/* refers to the object itself. */ -GC_API void GC_CALL GC_register_finalizer_ignore_self - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); -GC_API void GC_CALL GC_debug_register_finalizer_ignore_self - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); +/* Routines that allocate objects with debug information (like the */ +/* above), but just fill in dummy file and line number information. */ +/* Thus they can serve as drop-in malloc/realloc replacements. This */ +/* can be useful for two reasons: */ +/* 1) It allows the collector to be built with DBG_HDRS_ALL defined */ +/* even if some allocation calls come from 3rd party libraries */ +/* that can't be recompiled. */ +/* 2) On some platforms, the file and line information is redundant, */ +/* since it can be reconstructed from a stack trace. On such */ +/* platforms it may be more convenient not to recompile, e.g. for */ +/* leak detection. This can be accomplished by instructing the */ +/* linker to replace malloc/realloc with these. */ +GC_API void * GC_CALL GC_debug_malloc_replacement(size_t /* size_in_bytes */) + GC_ATTR_MALLOC GC_ATTR_ALLOC_SIZE(1); +GC_API void * GC_CALL GC_debug_realloc_replacement(void * /* object_addr */, + size_t /* size_in_bytes */) + /* 'realloc' attr */ GC_ATTR_ALLOC_SIZE(2); + +#ifdef GC_DEBUG +# define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS) +# define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS) +# define GC_STRDUP(s) GC_debug_strdup((s), GC_EXTRAS) +# define GC_MALLOC_UNCOLLECTABLE(sz) \ + GC_debug_malloc_uncollectable(sz, GC_EXTRAS) +# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ + GC_debug_malloc_ignore_off_page(sz, GC_EXTRAS) +# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ + GC_debug_malloc_atomic_ignore_off_page(sz, GC_EXTRAS) +# define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS) +# define GC_FREE(p) GC_debug_free(p) +# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ + GC_debug_register_finalizer(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ + GC_debug_register_finalizer_ignore_self(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ + GC_debug_register_finalizer_no_order(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ + GC_debug_register_finalizer_unreachable(p, f, d, of, od) +# define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS); +# define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p) +# define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p) +# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ + GC_general_register_disappearing_link(link, GC_base(obj)) +# define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n) +#else +# define GC_MALLOC(sz) GC_malloc(sz) +# define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz) +# define GC_STRDUP(s) GC_strdup(s) +# define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz) +# define GC_MALLOC_IGNORE_OFF_PAGE(sz) \ + GC_malloc_ignore_off_page(sz) +# define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \ + GC_malloc_atomic_ignore_off_page(sz) +# define GC_REALLOC(old, sz) GC_realloc(old, sz) +# define GC_FREE(p) GC_free(p) +# define GC_REGISTER_FINALIZER(p, f, d, of, od) \ + GC_register_finalizer(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \ + GC_register_finalizer_ignore_self(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \ + GC_register_finalizer_no_order(p, f, d, of, od) +# define GC_REGISTER_FINALIZER_UNREACHABLE(p, f, d, of, od) \ + GC_register_finalizer_unreachable(p, f, d, of, od) +# define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz) +# define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p) +# define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p) +# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \ + GC_general_register_disappearing_link(link, obj) +# define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n) +#endif + +/* The following are included because they are often convenient, and */ +/* reduce the chance for a misspecified size argument. But calls may */ +/* expand to something syntactically incorrect if t is a complicated */ +/* type expression. */ +#define GC_NEW(t) (t *)GC_MALLOC(sizeof (t)) +#define GC_NEW_ATOMIC(t) (t *)GC_MALLOC_ATOMIC(sizeof (t)) +#define GC_NEW_STUBBORN(t) (t *)GC_MALLOC_STUBBORN(sizeof (t)) +#define GC_NEW_UNCOLLECTABLE(t) (t *)GC_MALLOC_UNCOLLECTABLE(sizeof (t)) + +/* Finalization. Some of these primitives are grossly unsafe. */ +/* The idea is to make them both cheap, and sufficient to build */ +/* a safer layer, closer to Modula-3, Java, or PCedar finalization. */ +/* The interface represents my conclusions from a long discussion */ +/* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */ +/* Christian Jacobi, and Russ Atkinson. It's not perfect, and */ +/* probably nobody else agrees with it. Hans-J. Boehm 3/13/92 */ +typedef void (GC_CALLBACK * GC_finalization_proc)(void * /* obj */, + void * /* client_data */); + +GC_API void GC_CALL GC_register_finalizer(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + /* When obj is no longer accessible, invoke */ + /* (*fn)(obj, cd). If a and b are inaccessible, and */ + /* a points to b (after disappearing links have been */ + /* made to disappear), then only a will be */ + /* finalized. (If this does not create any new */ + /* pointers to b, then b will be finalized after the */ + /* next collection.) Any finalizable object that */ + /* is reachable from itself by following one or more */ + /* pointers will not be finalized (or collected). */ + /* Thus cycles involving finalizable objects should */ + /* be avoided, or broken by disappearing links. */ + /* All but the last finalizer registered for an object */ + /* is ignored. */ + /* Finalization may be removed by passing 0 as fn. */ + /* Finalizers are implicitly unregistered when they are */ + /* enqueued for finalization (i.e. become ready to be */ + /* finalized). */ + /* The old finalizer and client data are stored in */ + /* *ofn and *ocd. (ofn and/or ocd may be NULL. */ + /* The allocation lock is held while *ofn and *ocd are */ + /* updated. In case of error (no memory to register */ + /* new finalizer), *ofn and *ocd remain unchanged.) */ + /* Fn is never invoked on an accessible object, */ + /* provided hidden pointers are converted to real */ + /* pointers only if the allocation lock is held, and */ + /* such conversions are not performed by finalization */ + /* routines. */ + /* If GC_register_finalizer is aborted as a result of */ + /* a signal, the object may be left with no */ + /* finalization, even if neither the old nor new */ + /* finalizer were NULL. */ + /* Obj should be the starting address of an object */ + /* allocated by GC_malloc or friends. Obj may also be */ + /* NULL or point to something outside GC heap (in this */ + /* case, fn is ignored, *ofn and *ocd are set to NULL). */ + /* Note that any garbage collectable object referenced */ + /* by cd will be considered accessible until the */ + /* finalizer is invoked. */ + +/* Another versions of the above follow. It ignores */ +/* self-cycles, i.e. pointers from a finalizable object to */ +/* itself. There is a stylistic argument that this is wrong, */ +/* but it's unavoidable for C++, since the compiler may */ +/* silently introduce these. It's also benign in that specific */ +/* case. And it helps if finalizable objects are split to */ +/* avoid cycles. */ +/* Note that cd will still be viewed as accessible, even if it */ +/* refers to the object itself. */ +GC_API void GC_CALL GC_register_finalizer_ignore_self(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_ignore_self(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); /* Another version of the above. It ignores all cycles. */ /* It should probably only be used by Java implementations. */ -/* Note that cd will still be viewed as accessible, even if it */ -/* refers to the object itself. */ -GC_API void GC_CALL GC_register_finalizer_no_order - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); -GC_API void GC_CALL GC_debug_register_finalizer_no_order - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); +/* Note that cd will still be viewed as accessible, even if it */ +/* refers to the object itself. */ +GC_API void GC_CALL GC_register_finalizer_no_order(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_no_order(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); /* This is a special finalizer that is useful when an object's */ /* finalizer must be run when the object is known to be no */ /* longer reachable, not even from other finalizable objects. */ -/* It behaves like "normal" finalization, except that the */ -/* finalizer is not run while the object is reachable from */ -/* other objects specifying unordered finalization. */ -/* Effectively it allows an object referenced, possibly */ +/* It behaves like "normal" finalization, except that the */ +/* finalizer is not run while the object is reachable from */ +/* other objects specifying unordered finalization. */ +/* Effectively it allows an object referenced, possibly */ /* indirectly, from an unordered finalizable object to override */ -/* the unordered finalization request. */ +/* the unordered finalization request. */ /* This can be used in combination with finalizer_no_order so */ /* as to release resources that must not be released while an */ /* object can still be brought back to life by other */ /* finalizers. */ -/* Only works if GC_java_finalization is set. Probably only */ -/* of interest when implementing a language that requires */ -/* unordered finalization (e.g. Java, C#). */ -GC_API void GC_CALL GC_register_finalizer_unreachable - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); -GC_API void GC_CALL GC_debug_register_finalizer_unreachable - (void * obj, GC_finalization_proc fn, void * cd, - GC_finalization_proc *ofn, void * *ocd); - -/* The following routine may be used to break cycles between */ -/* finalizable objects, thus causing cyclic finalizable */ -/* objects to be finalized in the correct order. Standard */ -/* use involves calling GC_register_disappearing_link(&p), */ -/* where p is a pointer that is not followed by finalization */ -/* code, and should not be considered in determining */ -/* finalization order. */ -GC_API int GC_CALL GC_register_disappearing_link(void * * link ); - /* Link should point to a field of a heap allocated */ - /* object obj. *link will be cleared when obj is */ - /* found to be inaccessible. This happens BEFORE any */ - /* finalization code is invoked, and BEFORE any */ - /* decisions about finalization order are made. */ - /* This is useful in telling the finalizer that */ - /* some pointers are not essential for proper */ - /* finalization. This may avoid finalization cycles. */ - /* Note that obj may be resurrected by another */ - /* finalizer, and thus the clearing of *link may */ - /* be visible to non-finalization code. */ - /* There's an argument that an arbitrary action should */ - /* be allowed here, instead of just clearing a pointer. */ - /* But this causes problems if that action alters, or */ - /* examines connectivity. */ - /* Returns 1 if link was already registered, 0 if */ - /* registration succeeded, 2 if it failed for lack of */ - /* memory, and GC_oom_fn did not handle the problem. */ - /* Only exists for backward compatibility. See below: */ - -GC_API int GC_CALL GC_general_register_disappearing_link (void * * link, - void * obj); - /* A slight generalization of the above. *link is */ - /* cleared when obj first becomes inaccessible. This */ - /* can be used to implement weak pointers easily and */ - /* safely. Typically link will point to a location */ - /* holding a disguised pointer to obj. (A pointer */ - /* inside an "atomic" object is effectively */ - /* disguised.) In this way soft */ - /* pointers are broken before any object */ - /* reachable from them are finalized. Each link */ - /* May be registered only once, i.e. with one obj */ - /* value. This was added after a long email discussion */ - /* with John Ellis. */ - /* Obj must be a pointer to the first word of an object */ - /* we allocated. It is unsafe to explicitly deallocate */ - /* the object containing link. Explicitly deallocating */ - /* obj may or may not cause link to eventually be */ - /* cleared. */ - /* This can be used to implement certain types of */ - /* weak pointers. Note however that this generally */ - /* requires that the allocation lock is held (see */ - /* GC_call_with_alloc_lock() below) when the disguised */ - /* pointer is accessed. Otherwise a strong pointer */ - /* could be recreated between the time the collector */ - /* decides to reclaim the object and the link is */ - /* cleared. */ - -GC_API int GC_CALL GC_unregister_disappearing_link (void * * link); - /* Undoes a registration by either of the above two */ - /* routines. Returns 0 if link was not actually */ - /* registered (otherwise returns 1). */ - -/* Returns !=0 if GC_invoke_finalizers has something to do. */ +/* Only works if GC_java_finalization is set. Probably only */ +/* of interest when implementing a language that requires */ +/* unordered finalization (e.g. Java, C#). */ +GC_API void GC_CALL GC_register_finalizer_unreachable(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); +GC_API void GC_CALL GC_debug_register_finalizer_unreachable(void * /* obj */, + GC_finalization_proc /* fn */, void * /* cd */, + GC_finalization_proc * /* ofn */, void ** /* ocd */); + +#define GC_NO_MEMORY 2 /* Failure due to lack of memory. */ + +/* The following routine may be used to break cycles between */ +/* finalizable objects, thus causing cyclic finalizable */ +/* objects to be finalized in the correct order. Standard */ +/* use involves calling GC_register_disappearing_link(&p), */ +/* where p is a pointer that is not followed by finalization */ +/* code, and should not be considered in determining */ +/* finalization order. */ +GC_API int GC_CALL GC_register_disappearing_link(void ** /* link */); + /* Link should point to a field of a heap allocated */ + /* object obj. *link will be cleared when obj is */ + /* found to be inaccessible. This happens BEFORE any */ + /* finalization code is invoked, and BEFORE any */ + /* decisions about finalization order are made. */ + /* This is useful in telling the finalizer that */ + /* some pointers are not essential for proper */ + /* finalization. This may avoid finalization cycles. */ + /* Note that obj may be resurrected by another */ + /* finalizer, and thus the clearing of *link may */ + /* be visible to non-finalization code. */ + /* There's an argument that an arbitrary action should */ + /* be allowed here, instead of just clearing a pointer. */ + /* But this causes problems if that action alters, or */ + /* examines connectivity. Returns GC_DUPLICATE if link */ + /* was already registered, GC_SUCCESS if registration */ + /* succeeded, GC_NO_MEMORY if it failed for lack of */ + /* memory, and GC_oom_fn did not handle the problem. */ + /* Only exists for backward compatibility. See below: */ + +GC_API int GC_CALL GC_general_register_disappearing_link(void ** /* link */, + void * /* obj */); + /* A slight generalization of the above. *link is */ + /* cleared when obj first becomes inaccessible. This */ + /* can be used to implement weak pointers easily and */ + /* safely. Typically link will point to a location */ + /* holding a disguised pointer to obj. (A pointer */ + /* inside an "atomic" object is effectively disguised.) */ + /* In this way, weak pointers are broken before any */ + /* object reachable from them gets finalized. */ + /* Each link may be registered only with one obj value, */ + /* i.e. all objects but the last one (link registered */ + /* with) are ignored. This was added after a long */ + /* email discussion with John Ellis. */ + /* link must be non-NULL (and be properly aligned). */ + /* obj must be a pointer to the first word of an object */ + /* allocated by GC_malloc or friends. It is unsafe to */ + /* explicitly deallocate the object containing link. */ + /* Explicit deallocation of obj may or may not cause */ + /* link to eventually be cleared. */ + /* This function can be used to implement certain types */ + /* of weak pointers. Note, however, this generally */ + /* requires that the allocation lock is held (see */ + /* GC_call_with_alloc_lock() below) when the disguised */ + /* pointer is accessed. Otherwise a strong pointer */ + /* could be recreated between the time the collector */ + /* decides to reclaim the object and the link is */ + /* cleared. Returns GC_SUCCESS if registration */ + /* succeeded (a new link is registered), GC_DUPLICATE */ + /* if link was already registered (with some object), */ + /* GC_NO_MEMORY if registration failed for lack of */ + /* memory (and GC_oom_fn did not handle the problem). */ + +GC_API int GC_CALL GC_unregister_disappearing_link(void ** /* link */); + /* Undoes a registration by either of the above two */ + /* routines. Returns 0 if link was not actually */ + /* registered (otherwise returns 1). */ + +/* Returns !=0 if GC_invoke_finalizers has something to do. */ GC_API int GC_CALL GC_should_invoke_finalizers(void); GC_API int GC_CALL GC_invoke_finalizers(void); - /* Run finalizers for all objects that are ready to */ - /* be finalized. Return the number of finalizers */ - /* that were run. Normally this is also called */ - /* implicitly during some allocations. If */ - /* GC_finalize_on_demand is nonzero, it must be called */ - /* explicitly. */ - -/* Explicitly tell the collector that an object is reachable */ -/* at a particular program point. This prevents the argument */ -/* pointer from being optimized away, even it is otherwise no */ -/* longer needed. It should have no visible effect in the */ -/* absence of finalizers or disappearing links. But it may be */ -/* needed to prevent finalizers from running while the */ -/* associated external resource is still in use. */ -/* The function is sometimes called keep_alive in other */ -/* settings. */ -# if defined(__GNUC__) && !defined(__INTEL_COMPILER) -# define GC_reachable_here(ptr) \ - __asm__ volatile(" " : : "X"(ptr) : "memory"); -# else - GC_API void GC_CALL GC_noop1(GC_word x); -# define GC_reachable_here(ptr) GC_noop1((GC_word)(ptr)); + /* Run finalizers for all objects that are ready to */ + /* be finalized. Return the number of finalizers */ + /* that were run. Normally this is also called */ + /* implicitly during some allocations. If */ + /* GC_finalize_on_demand is nonzero, it must be called */ + /* explicitly. */ + +/* Explicitly tell the collector that an object is reachable */ +/* at a particular program point. This prevents the argument */ +/* pointer from being optimized away, even it is otherwise no */ +/* longer needed. It should have no visible effect in the */ +/* absence of finalizers or disappearing links. But it may be */ +/* needed to prevent finalizers from running while the */ +/* associated external resource is still in use. */ +/* The function is sometimes called keep_alive in other */ +/* settings. */ +#if defined(__GNUC__) && !defined(__INTEL_COMPILER) +# define GC_reachable_here(ptr) \ + __asm__ volatile(" " : : "X"(ptr) : "memory"); +#else + GC_API void GC_CALL GC_noop1(GC_word); +# define GC_reachable_here(ptr) GC_noop1((GC_word)(ptr)); #endif -/* GC_set_warn_proc can be used to redirect or filter warning messages. */ -/* p may not be a NULL pointer. */ -typedef void (GC_CALLBACK * GC_warn_proc) (char *msg, GC_word arg); -GC_API void GC_CALL GC_set_warn_proc(GC_warn_proc p); -/* GC_get_warn_proc returns the current warn_proc. */ +/* GC_set_warn_proc can be used to redirect or filter warning messages. */ +/* p may not be a NULL pointer. Both the setter and the getter acquire */ +/* the GC lock (to avoid data races). */ +typedef void (GC_CALLBACK * GC_warn_proc)(char * /* msg */, + GC_word /* arg */); +GC_API void GC_CALL GC_set_warn_proc(GC_warn_proc /* p */); +/* GC_get_warn_proc returns the current warn_proc. */ GC_API GC_warn_proc GC_CALL GC_get_warn_proc(void); - /* GC_ignore_warn_proc may be used as an argument for */ - /* GC_set_warn_proc() to suppress all warnings (unless */ - /* statistics printing is turned on). */ -GC_API void GC_CALLBACK GC_ignore_warn_proc(char *msg, GC_word arg); - -/* The following is intended to be used by a higher level */ -/* (e.g. Java-like) finalization facility. It is expected */ -/* that finalization code will arrange for hidden pointers to */ -/* disappear. Otherwise objects can be accessed after they */ -/* have been collected. */ -/* Note that putting pointers in atomic objects or in */ -/* nonpointer slots of "typed" objects is equivalent to */ -/* disguising them in this way, and may have other advantages. */ -# if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS) - typedef GC_word GC_hidden_pointer; -# define HIDE_POINTER(p) (~(GC_hidden_pointer)(p)) -# define REVEAL_POINTER(p) ((void *)(HIDE_POINTER(p))) - /* Converting a hidden pointer to a real pointer requires verifying */ - /* that the object still exists. This involves acquiring the */ - /* allocator lock to avoid a race with the collector. */ -# endif /* I_HIDE_POINTERS */ - -typedef void * (GC_CALLBACK * GC_fn_type) (void * client_data); -GC_API void * GC_CALL GC_call_with_alloc_lock (GC_fn_type fn, - void * client_data); - -/* These routines are intended to explicitly notify the collector */ -/* of new threads. Often this is unnecessary because thread creation */ -/* is implicitly intercepted by the collector, using header-file */ -/* defines, or linker-based interception. In the long run the intent */ -/* is to always make redundant registration safe. In the short run, */ -/* this is being implemented a platform at a time. */ -/* The interface is complicated by the fact that we probably will not */ -/* ever be able to automatically determine the stack base for thread */ -/* stacks on all platforms. */ - -/* Structure representing the base of a thread stack. On most */ -/* platforms this contains just a single address. */ + /* GC_ignore_warn_proc may be used as an argument for */ + /* GC_set_warn_proc() to suppress all warnings (unless */ + /* statistics printing is turned on). */ +GC_API void GC_CALLBACK GC_ignore_warn_proc(char *, GC_word); + +/* The following is intended to be used by a higher level */ +/* (e.g. Java-like) finalization facility. It is expected */ +/* that finalization code will arrange for hidden pointers to */ +/* disappear. Otherwise objects can be accessed after they */ +/* have been collected. */ +/* Note that putting pointers in atomic objects or in */ +/* nonpointer slots of "typed" objects is equivalent to */ +/* disguising them in this way, and may have other advantages. */ +#if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS) + typedef GC_word GC_hidden_pointer; +# define HIDE_POINTER(p) (~(GC_hidden_pointer)(p)) +# define REVEAL_POINTER(p) ((void *)HIDE_POINTER(p)) + /* Converting a hidden pointer to a real pointer requires verifying */ + /* that the object still exists. This involves acquiring the */ + /* allocator lock to avoid a race with the collector. */ +#endif /* I_HIDE_POINTERS */ + +/* The GC-prefixed symbols are preferred for new code (I_HIDE_POINTERS, */ +/* HIDE_POINTER and REVEAL_POINTER remain for compatibility). */ +#ifdef GC_I_HIDE_POINTERS +# define GC_HIDE_POINTER(p) HIDE_POINTER(p) +# define GC_REVEAL_POINTER(p) REVEAL_POINTER(p) +#endif + +typedef void * (GC_CALLBACK * GC_fn_type)(void * /* client_data */); +GC_API void * GC_CALL GC_call_with_alloc_lock(GC_fn_type /* fn */, + void * /* client_data */); + +/* These routines are intended to explicitly notify the collector */ +/* of new threads. Often this is unnecessary because thread creation */ +/* is implicitly intercepted by the collector, using header-file */ +/* defines, or linker-based interception. In the long run the intent */ +/* is to always make redundant registration safe. In the short run, */ +/* this is being implemented a platform at a time. */ +/* The interface is complicated by the fact that we probably will not */ +/* ever be able to automatically determine the stack base for thread */ +/* stacks on all platforms. */ + +/* Structure representing the base of a thread stack. On most */ +/* platforms this contains just a single address. */ struct GC_stack_base { - void * mem_base; /* Base of memory stack. */ -# if defined(__ia64) || defined(__ia64__) || defined(_M_IA64) - void * reg_base; /* Base of separate register stack. */ -# endif + void * mem_base; /* Base of memory stack. */ +# if defined(__ia64) || defined(__ia64__) || defined(_M_IA64) + void * reg_base; /* Base of separate register stack. */ +# endif }; -typedef void * (GC_CALLBACK * GC_stack_base_func)(struct GC_stack_base *sb, - void *arg); - -/* Call a function with a stack base structure corresponding to */ -/* somewhere in the GC_call_with_stack_base frame. This often can */ -/* be used to provide a sufficiently accurate stack base. And we */ -/* implement it everywhere. */ -GC_API void * GC_CALL GC_call_with_stack_base(GC_stack_base_func fn, - void *arg); - -/* Explicitly enable GC_register_my_thread() invocation. */ -/* Done implicitly if a GC thread-creation function is called (or */ -/* DllMain-based thread registration is enabled). Otherwise, it must */ -/* be called from the main (or any previously registered) thread */ -/* between the collector initialization and the first explicit */ -/* registering of a thread (it should be called as late as possible). */ -GC_API void GC_CALL GC_allow_register_threads(void); +typedef void * (GC_CALLBACK * GC_stack_base_func)( + struct GC_stack_base * /* sb */, void * /* arg */); + +/* Call a function with a stack base structure corresponding to */ +/* somewhere in the GC_call_with_stack_base frame. This often can */ +/* be used to provide a sufficiently accurate stack base. And we */ +/* implement it everywhere. */ +GC_API void * GC_CALL GC_call_with_stack_base(GC_stack_base_func /* fn */, + void * /* arg */); -/* Register the current thread, with the indicated stack base, as */ -/* a new thread whose stack(s) should be traced by the GC. If it */ -/* is not implicitly called by the GC, this must be called before a */ -/* thread can allocate garbage collected memory, or assign pointers */ -/* to the garbage collected heap. Once registered, a thread will be */ -/* stopped during garbage collections. */ -/* This call must be previously enabled (see above). */ -/* This should never be called from the main thread, where it is */ -/* always done implicitly. This is normally done implicitly if GC_ */ -/* functions are called to create the thread, e.g. by defining */ -/* GC_THREADS and including gc.h (which redefines some system */ -/* functions) before calling the system thread creation function. */ -/* It is also always done implicitly under win32 with DllMain-based */ -/* thread registration enabled. Except in this latter case, explicit */ -/* calls are normally required for threads created by third-party */ -/* libraries. */ #define GC_SUCCESS 0 -#define GC_DUPLICATE 1 /* Was already registered. */ -#define GC_NO_THREADS 2 /* No thread support in GC. */ -#define GC_UNIMPLEMENTED 3 /* Not yet implemented on this platform. */ -GC_API int GC_CALL GC_register_my_thread(struct GC_stack_base *); - -/* Unregister the current thread. Only an explicity registered thread */ -/* (i.e. for which GC_register_my_thread() returns GC_SUCCESS) is */ -/* allowed (and required) to call this function. The thread may no */ -/* longer allocate garbage collected memory or manipulate pointers to */ -/* the garbage collected heap after making this call. */ -/* Specifically, if it wants to return or otherwise communicate a */ -/* pointer to the garbage-collected heap to another thread, it must */ -/* do this before calling GC_unregister_my_thread, most probably */ -/* by saving it in a global data structure. */ +#define GC_DUPLICATE 1 /* Was already registered. */ +#define GC_NO_THREADS 2 /* No thread support in GC. */ + /* GC_NO_THREADS is not returned by any GC func anymore. */ +#define GC_UNIMPLEMENTED 3 /* Not yet implemented on this platform. */ + +/* GC_allow_register_threads(), GC_register_my_thread() and */ +/* GC_unregister_my_thread() are exported only if the library has been */ +/* compiled with threads support (GC_THREADS). */ + +/* Explicitly enable GC_register_my_thread() invocation. */ +/* Done implicitly if a GC thread-creation function is called (or */ +/* DllMain-based thread registration is enabled). Otherwise, it must */ +/* be called from the main (or any previously registered) thread */ +/* between the collector initialization and the first explicit */ +/* registering of a thread (it should be called as late as possible). */ +GC_API void GC_CALL GC_allow_register_threads(void); + +/* Register the current thread, with the indicated stack base, as */ +/* a new thread whose stack(s) should be traced by the GC. If it */ +/* is not implicitly called by the GC, this must be called before a */ +/* thread can allocate garbage collected memory, or assign pointers */ +/* to the garbage collected heap. Once registered, a thread will be */ +/* stopped during garbage collections. */ +/* This call must be previously enabled (see above). */ +/* This should never be called from the main thread, where it is */ +/* always done implicitly. This is normally done implicitly if GC_ */ +/* functions are called to create the thread, e.g. by defining */ +/* GC_THREADS and including gc.h (which redefines some system */ +/* functions) before calling the system thread creation function. */ +/* It is also always done implicitly under win32 with DllMain-based */ +/* thread registration enabled. Except in this latter case, explicit */ +/* calls are normally required for threads created by third-party */ +/* libraries. */ +GC_API int GC_CALL GC_register_my_thread(const struct GC_stack_base *); + +/* Unregister the current thread. Only an explicity registered thread */ +/* (i.e. for which GC_register_my_thread() returns GC_SUCCESS) is */ +/* allowed (and required) to call this function. The thread may no */ +/* longer allocate garbage collected memory or manipulate pointers to */ +/* the garbage collected heap after making this call. */ +/* Specifically, if it wants to return or otherwise communicate a */ +/* pointer to the garbage-collected heap to another thread, it must */ +/* do this before calling GC_unregister_my_thread, most probably */ +/* by saving it in a global data structure. Must not be called inside */ +/* a GC callback function (except for GC_call_with_stack_base() one). */ GC_API int GC_CALL GC_unregister_my_thread(void); -/* Attempt to fill in the GC_stack_base structure with the stack base */ -/* for this thread. This appears to be required to implement anything */ -/* like the JNI AttachCurrentThread in an environment in which new */ -/* threads are not automatically registered with the collector. */ -/* It is also unfortunately hard to implement well on many platforms. */ -/* Returns GC_SUCCESS or GC_UNIMPLEMENTED. */ +/* Wrapper for functions that are likely to block (or, at least, do not */ +/* allocate garbage collected memory and/or manipulate pointers to the */ +/* garbage collected heap) for an appreciable length of time. While fn */ +/* is running, the collector is said to be in the "inactive" state for */ +/* the current thread (this means that the thread is not suspended and */ +/* the thread's stack frames "belonging" to the functions in the */ +/* "inactive" state are not scanned during garbage collections). It is */ +/* allowed for fn to call GC_call_with_gc_active() (even recursively), */ +/* thus temporarily toggling the collector's state back to "active". */ +GC_API void * GC_CALL GC_do_blocking(GC_fn_type /* fn */, + void * /* client_data */); + +/* Call a function switching to the "active" state of the collector for */ +/* the current thread (i.e. the user function is allowed to call any */ +/* GC function and/or manipulate pointers to the garbage collected */ +/* heap). GC_call_with_gc_active() has the functionality opposite to */ +/* GC_do_blocking() one. It is assumed that the collector is already */ +/* initialized and the current thread is registered. fn may toggle */ +/* the collector thread's state temporarily to "inactive" one by using */ +/* GC_do_blocking. GC_call_with_gc_active() often can be used to */ +/* provide a sufficiently accurate stack base. */ +GC_API void * GC_CALL GC_call_with_gc_active(GC_fn_type /* fn */, + void * /* client_data */); + +/* Attempt to fill in the GC_stack_base structure with the stack base */ +/* for this thread. This appears to be required to implement anything */ +/* like the JNI AttachCurrentThread in an environment in which new */ +/* threads are not automatically registered with the collector. */ +/* It is also unfortunately hard to implement well on many platforms. */ +/* Returns GC_SUCCESS or GC_UNIMPLEMENTED. */ GC_API int GC_CALL GC_get_stack_base(struct GC_stack_base *); -/* The following routines are primarily intended for use with a */ -/* preprocessor which inserts calls to check C pointer arithmetic. */ -/* They indicate failure by invoking the corresponding _print_proc. */ - -/* Check that p and q point to the same object. */ -/* Fail conspicuously if they don't. */ -/* Returns the first argument. */ -/* Succeeds if neither p nor q points to the heap. */ -/* May succeed if both p and q point to between heap objects. */ -GC_API void * GC_CALL GC_same_obj (void * p, void * q); - -/* Checked pointer pre- and post- increment operations. Note that */ -/* the second argument is in units of bytes, not multiples of the */ -/* object size. This should either be invoked from a macro, or the */ -/* call should be automatically generated. */ -GC_API void * GC_CALL GC_pre_incr (void * *p, ptrdiff_t how_much); -GC_API void * GC_CALL GC_post_incr (void * *p, ptrdiff_t how_much); - -/* Check that p is visible */ -/* to the collector as a possibly pointer containing location. */ -/* If it isn't fail conspicuously. */ -/* Returns the argument in all cases. May erroneously succeed */ -/* in hard cases. (This is intended for debugging use with */ -/* untyped allocations. The idea is that it should be possible, though */ -/* slow, to add such a call to all indirect pointer stores.) */ -/* Currently useless for multithreaded worlds. */ -GC_API void * GC_CALL GC_is_visible (void * p); - -/* Check that if p is a pointer to a heap page, then it points to */ -/* a valid displacement within a heap object. */ -/* Fail conspicuously if this property does not hold. */ -/* Uninteresting with GC_all_interior_pointers. */ -/* Always returns its argument. */ -GC_API void * GC_CALL GC_is_valid_displacement (void * p); - -/* Explicitly dump the GC state. This is most often called from the */ -/* debugger, or by setting the GC_DUMP_REGULARLY environment variable, */ -/* but it may be useful to call it from client code during debugging. */ -/* Defined only if the library has been compiled without NO_DEBUGGING. */ +/* The following routines are primarily intended for use with a */ +/* preprocessor which inserts calls to check C pointer arithmetic. */ +/* They indicate failure by invoking the corresponding _print_proc. */ + +/* Check that p and q point to the same object. */ +/* Fail conspicuously if they don't. */ +/* Returns the first argument. */ +/* Succeeds if neither p nor q points to the heap. */ +/* May succeed if both p and q point to between heap objects. */ +GC_API void * GC_CALL GC_same_obj(void * /* p */, void * /* q */); + +/* Checked pointer pre- and post- increment operations. Note that */ +/* the second argument is in units of bytes, not multiples of the */ +/* object size. This should either be invoked from a macro, or the */ +/* call should be automatically generated. */ +GC_API void * GC_CALL GC_pre_incr(void **, ptrdiff_t /* how_much */); +GC_API void * GC_CALL GC_post_incr(void **, ptrdiff_t /* how_much */); + +/* Check that p is visible */ +/* to the collector as a possibly pointer containing location. */ +/* If it isn't fail conspicuously. */ +/* Returns the argument in all cases. May erroneously succeed */ +/* in hard cases. (This is intended for debugging use with */ +/* untyped allocations. The idea is that it should be possible, though */ +/* slow, to add such a call to all indirect pointer stores.) */ +/* Currently useless for multithreaded worlds. */ +GC_API void * GC_CALL GC_is_visible(void * /* p */); + +/* Check that if p is a pointer to a heap page, then it points to */ +/* a valid displacement within a heap object. */ +/* Fail conspicuously if this property does not hold. */ +/* Uninteresting with GC_all_interior_pointers. */ +/* Always returns its argument. */ +GC_API void * GC_CALL GC_is_valid_displacement(void * /* p */); + +/* Explicitly dump the GC state. This is most often called from the */ +/* debugger, or by setting the GC_DUMP_REGULARLY environment variable, */ +/* but it may be useful to call it from client code during debugging. */ +/* Defined only if the library has been compiled without NO_DEBUGGING. */ GC_API void GC_CALL GC_dump(void); -/* Safer, but slow, pointer addition. Probably useful mainly with */ -/* a preprocessor. Useful only for heap pointers. */ -/* Only the macros without trailing digits are meant to be used */ -/* by clients. These are designed to model the available C pointer */ -/* arithmetic expressions. */ -/* Even then, these are probably more useful as */ -/* documentation than as part of the API. */ -/* Note that GC_PTR_ADD evaluates the first argument more than once. */ +/* Safer, but slow, pointer addition. Probably useful mainly with */ +/* a preprocessor. Useful only for heap pointers. */ +/* Only the macros without trailing digits are meant to be used */ +/* by clients. These are designed to model the available C pointer */ +/* arithmetic expressions. */ +/* Even then, these are probably more useful as */ +/* documentation than as part of the API. */ +/* Note that GC_PTR_ADD evaluates the first argument more than once. */ #if defined(GC_DEBUG) && defined(__GNUC__) -# define GC_PTR_ADD3(x, n, type_of_result) \ - ((type_of_result)GC_same_obj((x)+(n), (x))) -# define GC_PRE_INCR3(x, n, type_of_result) \ - ((type_of_result)GC_pre_incr((void **)(&(x)), (n)*sizeof(*x))) -# define GC_POST_INCR3(x, n, type_of_result) \ - ((type_of_result)GC_post_incr((void **)(&(x)), (n)*sizeof(*x))) -# define GC_PTR_ADD(x, n) \ - GC_PTR_ADD3(x, n, typeof(x)) -# define GC_PRE_INCR(x, n) \ - GC_PRE_INCR3(x, n, typeof(x)) -# define GC_POST_INCR(x) \ - GC_POST_INCR3(x, 1, typeof(x)) -# define GC_POST_DECR(x) \ - GC_POST_INCR3(x, -1, typeof(x)) -#else /* !GC_DEBUG || !__GNUC__ */ - /* We can't do this right without typeof, which ANSI */ - /* decided was not sufficiently useful. Without it */ - /* we resort to the non-debug version. */ - /* FIXME: This should eventually support C++0x decltype */ -# define GC_PTR_ADD(x, n) ((x)+(n)) -# define GC_PRE_INCR(x, n) ((x) += (n)) -# define GC_POST_INCR(x) ((x)++) -# define GC_POST_DECR(x) ((x)--) -#endif - -/* Safer assignment of a pointer to a non-stack location. */ +# define GC_PTR_ADD3(x, n, type_of_result) \ + ((type_of_result)GC_same_obj((x)+(n), (x))) +# define GC_PRE_INCR3(x, n, type_of_result) \ + ((type_of_result)GC_pre_incr((void **)(&(x)), (n)*sizeof(*x))) +# define GC_POST_INCR3(x, n, type_of_result) \ + ((type_of_result)GC_post_incr((void **)(&(x)), (n)*sizeof(*x))) +# define GC_PTR_ADD(x, n) GC_PTR_ADD3(x, n, typeof(x)) +# define GC_PRE_INCR(x, n) GC_PRE_INCR3(x, n, typeof(x)) +# define GC_POST_INCR(x) GC_POST_INCR3(x, 1, typeof(x)) +# define GC_POST_DECR(x) GC_POST_INCR3(x, -1, typeof(x)) +#else /* !GC_DEBUG || !__GNUC__ */ + /* We can't do this right without typeof, which ANSI decided was not */ + /* sufficiently useful. Without it we resort to the non-debug version. */ + /* FIXME: This should eventually support C++0x decltype. */ +# define GC_PTR_ADD(x, n) ((x)+(n)) +# define GC_PRE_INCR(x, n) ((x) += (n)) +# define GC_POST_INCR(x) ((x)++) +# define GC_POST_DECR(x) ((x)--) +#endif /* !GC_DEBUG || !__GNUC__ */ + +/* Safer assignment of a pointer to a non-stack location. */ #ifdef GC_DEBUG -# define GC_PTR_STORE(p, q) \ - (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q)) -#else /* !GC_DEBUG */ -# define GC_PTR_STORE(p, q) (*(p) = (q)) +# define GC_PTR_STORE(p, q) \ + (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q)) +#else +# define GC_PTR_STORE(p, q) (*(p) = (q)) #endif /* Functions called to report pointer checking errors */ -GC_API void (GC_CALLBACK * GC_same_obj_print_proc) (void * p, void * q); - -GC_API void (GC_CALLBACK * GC_is_valid_displacement_print_proc) (void * p); - -GC_API void (GC_CALLBACK * GC_is_visible_print_proc) (void * p); - - -/* For pthread support, we generally need to intercept a number of */ -/* thread library calls. We do that here by macro defining them. */ - -#if !defined(GC_USE_LD_WRAP) && !defined(GC_NO_THREAD_REDIRECTS) \ - && defined(GC_PTHREADS) +GC_API void (GC_CALLBACK * GC_same_obj_print_proc)(void * /* p */, + void * /* q */); +GC_API void (GC_CALLBACK * GC_is_valid_displacement_print_proc)(void *); +GC_API void (GC_CALLBACK * GC_is_visible_print_proc)(void *); + +#ifdef GC_PTHREADS + /* For pthread support, we generally need to intercept a number of */ + /* thread library calls. We do that here by macro defining them. */ # include "gc_pthread_redirects.h" #endif -# if defined(PCR) || defined(GC_SOLARIS_THREADS) || \ - defined(GC_PTHREADS) || defined(GC_WIN32_THREADS) - /* Any flavor of threads. */ -/* This returns a list of objects, linked through their first */ -/* word. Its use can greatly reduce lock contention problems, since */ -/* the allocation lock can be acquired and released many fewer times. */ -GC_API void * GC_CALL GC_malloc_many(size_t lb); -#define GC_NEXT(p) (*(void * *)(p)) /* Retrieve the next element */ - /* in returned list. */ +/* This returns a list of objects, linked through their first word. */ +/* Its use can greatly reduce lock contention problems, since the */ +/* allocation lock can be acquired and released many fewer times. */ +/* Exported only if the library has been compiled with threads support. */ +GC_API void * GC_CALL GC_malloc_many(size_t /* lb */); +#define GC_NEXT(p) (*(void * *)(p)) /* Retrieve the next element */ + /* in returned list. */ + +/* A filter function to control the scanning of dynamic libraries. */ +/* If implemented, called by GC before registering a dynamic library */ +/* (discovered by GC) section as a static data root (called only as */ +/* a last reason not to register). The filename of the library, the */ +/* address and the length of the memory region (section) are passed. */ +/* This routine should return nonzero if that region should be scanned. */ +/* Always called with the allocation lock held. Depending on the */ +/* platform, might be called with the "world" stopped. */ +typedef int (GC_CALLBACK * GC_has_static_roots_func)( + const char * /* dlpi_name */, + void * /* section_start */, + size_t /* section_size */); + +/* Register a new callback (a user-supplied filter) to control the */ +/* scanning of dynamic libraries. Replaces any previously registered */ +/* callback. May be 0 (means no filtering). May be unused on some */ +/* platforms (if the filtering is unimplemented or inappropriate). */ +GC_API void GC_CALL GC_register_has_static_roots_callback( + GC_has_static_roots_func); + +#if defined(GC_WIN32_THREADS) && !defined(GC_PTHREADS) + +# ifndef GC_NO_THREAD_DECLS + +# ifdef __cplusplus + } /* Including windows.h in an extern "C" context no longer works. */ +# endif -#endif /* THREADS */ +# if !defined(_WIN32_WCE) && !defined(__CEGCC__) +# include /* For _beginthreadex, _endthreadex */ +# endif -/* Register a callback to control the scanning of dynamic libraries. - When the GC scans the static data of a dynamic library, it will - first call a user-supplied routine with filename of the library and - the address and length of the memory region. This routine should - return nonzero if that region should be scanned. */ -GC_API void GC_CALL GC_register_has_static_roots_callback - (int (GC_CALLBACK * callback)(const char *, void *, size_t)); +# include +# ifdef __cplusplus + extern "C" { +# endif -#if defined(GC_WIN32_THREADS) && !defined(__CYGWIN32__) \ - && !defined(__CYGWIN__) \ - && !defined(GC_PTHREADS) +# ifdef GC_UNDERSCORE_STDCALL + /* Explicitly prefix exported/imported WINAPI (__stdcall) symbols */ + /* with '_' (underscore). Might be useful if MinGW/x86 is used. */ +# define GC_CreateThread _GC_CreateThread +# define GC_ExitThread _GC_ExitThread +# endif -#ifndef GC_NO_THREAD_DECLS + /* All threads must be created using GC_CreateThread or */ + /* GC_beginthreadex, or must explicitly call GC_register_my_thread */ + /* (and call GC_unregister_my_thread before thread termination), so */ + /* that they will be recorded in the thread table. For backward */ + /* compatibility, it is possible to build the GC with GC_DLL */ + /* defined, and to call GC_use_DllMain(). This implicitly */ + /* registers all created threads, but appears to be less robust. */ + /* Currently the collector expects all threads to fall through and */ + /* terminate normally, or call GC_endthreadex() or GC_ExitThread, */ + /* so that the thread is properly unregistered. */ + GC_API HANDLE WINAPI GC_CreateThread( + LPSECURITY_ATTRIBUTES /* lpThreadAttributes */, + DWORD /* dwStackSize */, + LPTHREAD_START_ROUTINE /* lpStartAddress */, + LPVOID /* lpParameter */, DWORD /* dwCreationFlags */, + LPDWORD /* lpThreadId */); + + GC_API void WINAPI GC_ExitThread(DWORD /* dwExitCode */); + +# if !defined(_WIN32_WCE) && !defined(__CEGCC__) +# if !defined(_UINTPTR_T) && !defined(_UINTPTR_T_DEFINED) \ + && !defined(UINTPTR_MAX) + typedef GC_word GC_uintptr_t; +# else + typedef uintptr_t GC_uintptr_t; +# endif + + GC_API GC_uintptr_t GC_CALL GC_beginthreadex( + void * /* security */, unsigned /* stack_size */, + unsigned (__stdcall *)(void *), + void * /* arglist */, unsigned /* initflag */, + unsigned * /* thrdaddr */); + + GC_API void GC_CALL GC_endthreadex(unsigned /* retval */); +# endif /* !_WIN32_WCE */ + +# endif /* !GC_NO_THREAD_DECLS */ + +# ifdef GC_WINMAIN_REDIRECT + /* win32_threads.c implements the real WinMain(), which will start */ + /* a new thread to call GC_WinMain() after initializing the garbage */ + /* collector. */ +# define WinMain GC_WinMain +# endif -#ifdef __cplusplus - } /* Including windows.h in an extern "C" context no longer works. */ -#endif + /* Use implicit thread registration via DllMain. Deprecated. Must */ + /* be called before GC_INIT() and other GC routines. Should be */ + /* avoided if GC_beginthreadex() or GC_CreateThread() could be called */ + /* instead. */ + GC_API void GC_CALL GC_use_DllMain(void); -# if !defined(_WIN32_WCE) -# include /* For _beginthreadex, _endthreadex */ -# endif +# ifndef GC_NO_THREAD_REDIRECTS +# define CreateThread GC_CreateThread +# define ExitThread GC_ExitThread +# undef _beginthreadex +# define _beginthreadex GC_beginthreadex +# undef _endthreadex +# define _endthreadex GC_endthreadex +/* #define _beginthread { > "Please use _beginthreadex instead of _beginthread" < } */ +# endif /* !GC_NO_THREAD_REDIRECTS */ -# include +#endif /* GC_WIN32_THREADS */ + +/* Public setter and getter for switching "unmap as much as possible" */ +/* mode on(1) and off(0). Has no effect unless unmapping is turned on. */ +/* Has no effect on implicitly-initiated garbage collections. Initial */ +/* value is controlled by GC_FORCE_UNMAP_ON_GCOLLECT. */ +GC_API void GC_CALL GC_set_force_unmap_on_gcollect(int); +GC_API int GC_CALL GC_get_force_unmap_on_gcollect(void); + + /* Fully portable code should call GC_INIT() from the main program */ + /* before making any other GC_ calls. On most platforms this is a */ + /* no-op and the collector self-initializes. But a number of */ + /* platforms make that too hard. */ + /* A GC_INIT call is required if the collector is built with */ + /* THREAD_LOCAL_ALLOC defined and the initial allocation call is not */ + /* to GC_malloc() or GC_malloc_atomic(). */ + +#ifdef __CYGWIN32__ + /* Similarly gnu-win32 DLLs need explicit initialization from the */ + /* main program, as does AIX. */ + extern int _data_start__[], _data_end__[], _bss_start__[], _bss_end__[]; +# define GC_DATASTART (_data_start__ < _bss_start__ ? \ + (void *)_data_start__ : (void *)_bss_start__) +# define GC_DATAEND (_data_end__ > _bss_end__ ? \ + (void *)_data_end__ : (void *)_bss_end__) +# define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND); \ + GC_gcollect() /* For blacklisting. */ + /* Required at least if GC is in dll. And doesn't hurt. */ +#elif defined(_AIX) + extern int _data[], _end[]; +# define GC_DATASTART ((void *)((ulong)_data)) +# define GC_DATAEND ((void *)((ulong)_end)) +# define GC_INIT_CONF_ROOTS GC_add_roots(GC_DATASTART, GC_DATAEND) +#else +# define GC_INIT_CONF_ROOTS /* empty */ +#endif -#ifdef __cplusplus - extern "C" { +#ifdef GC_DONT_EXPAND + /* Set GC_dont_expand to TRUE at start-up */ +# define GC_INIT_CONF_DONT_EXPAND GC_set_dont_expand(1) +#else +# define GC_INIT_CONF_DONT_EXPAND /* empty */ #endif - /* - * All threads must be created using GC_CreateThread or GC_beginthreadex, - * or must explicitly call GC_register_my_thread - * (and call GC_unregister_my_thread before thread termination), - * so that they will be recorded in the thread table. - * For backwards compatibility, it is possible to build the GC - * with GC_DLL defined, and to call GC_use_DllMain(). - * This implicitly registers all created threads, but appears to be - * less robust. - * - * Currently the collector expects all threads to fall through and - * terminate normally, or call GC_endthreadex() or GC_ExitThread, - * so that the thread is properly unregistered. - */ - GC_API HANDLE WINAPI GC_CreateThread( - LPSECURITY_ATTRIBUTES lpThreadAttributes, - DWORD dwStackSize, LPTHREAD_START_ROUTINE lpStartAddress, - LPVOID lpParameter, DWORD dwCreationFlags, LPDWORD lpThreadId ); -# if !defined(_UINTPTR_T) && !defined(_UINTPTR_T_DEFINED) \ - && !defined(UINTPTR_MAX) - typedef GC_word GC_uintptr_t; -# else - typedef uintptr_t GC_uintptr_t; -# endif +#ifdef GC_FORCE_UNMAP_ON_GCOLLECT + /* Turn on "unmap as much as possible on explicit GC" mode at start-up */ +# define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT \ + GC_set_force_unmap_on_gcollect(1) +#else +# define GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT /* empty */ +#endif - GC_API GC_uintptr_t GC_CALL GC_beginthreadex( - void *security, unsigned stack_size, - unsigned ( __stdcall *start_address )( void * ), - void *arglist, unsigned initflag, unsigned *thrdaddr); +#ifdef GC_MAX_RETRIES + /* Set GC_max_retries to the desired value at start-up */ +# define GC_INIT_CONF_MAX_RETRIES GC_set_max_retries(GC_MAX_RETRIES) +#else +# define GC_INIT_CONF_MAX_RETRIES /* empty */ +#endif - GC_API void GC_CALL GC_endthreadex(unsigned retval); +#ifdef GC_FREE_SPACE_DIVISOR + /* Set GC_free_space_divisor to the desired value at start-up */ +# define GC_INIT_CONF_FREE_SPACE_DIVISOR \ + GC_set_free_space_divisor(GC_FREE_SPACE_DIVISOR) +#else +# define GC_INIT_CONF_FREE_SPACE_DIVISOR /* empty */ +#endif - GC_API void WINAPI GC_ExitThread(DWORD dwExitCode); +#ifdef GC_FULL_FREQ + /* Set GC_full_freq to the desired value at start-up */ +# define GC_INIT_CONF_FULL_FREQ GC_set_full_freq(GC_FULL_FREQ) +#else +# define GC_INIT_CONF_FULL_FREQ /* empty */ +#endif -# if defined(_WIN32_WCE) - /* - * win32_threads.c implements the real WinMain, which will start a new thread - * to call GC_WinMain after initializing the garbage collector. - */ - GC_API int WINAPI GC_WinMain( - HINSTANCE hInstance, - HINSTANCE hPrevInstance, - LPWSTR lpCmdLine, - int nCmdShow ); -# ifndef GC_BUILD -# define WinMain GC_WinMain -# endif -# endif /* defined(_WIN32_WCE) */ -#endif /* !GC_NO_THREAD_DECLS */ +#ifdef GC_TIME_LIMIT + /* Set GC_time_limit to the desired value at start-up */ +# define GC_INIT_CONF_TIME_LIMIT GC_set_time_limit(GC_TIME_LIMIT) +#else +# define GC_INIT_CONF_TIME_LIMIT /* empty */ +#endif - /* - * Use implicit thread registration via DllMain. - * Must be called before GC_INIT and other GC routines. - * Should be avoided if GC_beginthreadex and friends can be called - * instead. - */ -GC_API void GC_CALL GC_use_DllMain(void); +#ifdef GC_MAXIMUM_HEAP_SIZE + /* Limit the heap size to the desired value (useful for debugging). */ + /* The limit could be overridden either at the program start-up by */ + /* the similar environment variable or anytime later by the */ + /* corresponding API function call. */ +# define GC_INIT_CONF_MAXIMUM_HEAP_SIZE \ + GC_set_max_heap_size(GC_MAXIMUM_HEAP_SIZE) +#else +# define GC_INIT_CONF_MAXIMUM_HEAP_SIZE /* empty */ +#endif -# ifndef GC_NO_THREAD_REDIRECTS -# define CreateThread GC_CreateThread -# define ExitThread GC_ExitThread -# undef _beginthreadex -# define _beginthreadex GC_beginthreadex -# undef _endthreadex -# define _endthreadex GC_endthreadex -/* # define _beginthread { > "Please use _beginthreadex instead of _beginthread" < } */ -# endif /* !GC_NO_THREAD_REDIRECTS */ +#ifdef GC_IGNORE_WARN + /* Turn off all warnings at start-up (after GC initialization) */ +# define GC_INIT_CONF_IGNORE_WARN GC_set_warn_proc(GC_ignore_warn_proc) +#else +# define GC_INIT_CONF_IGNORE_WARN /* empty */ +#endif -#endif /* defined(GC_WIN32_THREADS) && !cygwin */ - - /* - * Fully portable code should call GC_INIT() from the main program - * before making any other GC_ calls. On most platforms this is a - * no-op and the collector self-initializes. But a number of platforms - * make that too hard. - * A GC_INIT call is required if the collector is built with THREAD_LOCAL_ALLOC - * defined and the initial allocation call is not to GC_malloc() or - * GC_malloc_atomic(). - */ -#if defined(__CYGWIN32__) || defined (_AIX) - /* - * Similarly gnu-win32 DLLs need explicit initialization from - * the main program, as does AIX. - */ -# ifdef __CYGWIN32__ - extern int _data_start__[]; - extern int _data_end__[]; - extern int _bss_start__[]; - extern int _bss_end__[]; -# define GC_MAX(x,y) ((x) > (y) ? (x) : (y)) -# define GC_MIN(x,y) ((x) < (y) ? (x) : (y)) -# define GC_DATASTART ((void *) GC_MIN(_data_start__, _bss_start__)) -# define GC_DATAEND ((void *) GC_MAX(_data_end__, _bss_end__)) -# define GC_INIT() { GC_add_roots(GC_DATASTART, GC_DATAEND); \ - GC_gcollect(); /* For blacklisting. */} - /* Required at least if GC is in dll. And doesn't hurt. */ -# endif -# if defined(_AIX) - extern int _data[], _end[]; -# define GC_DATASTART ((void *)((ulong)_data)) -# define GC_DATAEND ((void *)((ulong)_end)) -# define GC_INIT() { GC_add_roots(GC_DATASTART, GC_DATAEND); } -# endif +#ifdef GC_INITIAL_HEAP_SIZE + /* Set heap size to the desired value at start-up */ +# define GC_INIT_CONF_INITIAL_HEAP_SIZE \ + { size_t heap_size = GC_get_heap_size(); \ + if (heap_size < (GC_INITIAL_HEAP_SIZE)) \ + (void)GC_expand_hp((GC_INITIAL_HEAP_SIZE) - heap_size); } #else -# define GC_INIT() { GC_init(); } +# define GC_INIT_CONF_INITIAL_HEAP_SIZE /* empty */ #endif - /* win32S may not free all resources on process exit. */ - /* This explicitly deallocates the heap. */ +#define GC_INIT() { GC_INIT_CONF_DONT_EXPAND; /* pre-init */ \ + GC_INIT_CONF_FORCE_UNMAP_ON_GCOLLECT; \ + GC_INIT_CONF_MAX_RETRIES; \ + GC_INIT_CONF_FREE_SPACE_DIVISOR; \ + GC_INIT_CONF_FULL_FREQ; \ + GC_INIT_CONF_TIME_LIMIT; \ + GC_INIT_CONF_MAXIMUM_HEAP_SIZE; \ + GC_init(); /* real GC initialization */ \ + GC_INIT_CONF_ROOTS; /* post-init */ \ + GC_INIT_CONF_IGNORE_WARN; \ + GC_INIT_CONF_INITIAL_HEAP_SIZE; } + +/* win32S may not free all resources on process exit. */ +/* This explicitly deallocates the heap. */ GC_API void GC_CALL GC_win32_free_heap(void); -#if ( defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB) ) - /* Allocation really goes through GC_amiga_allocwrapper_do */ +#if defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB) + /* Allocation really goes through GC_amiga_allocwrapper_do */ # include "gc_amiga_redirects.h" #endif @@ -1230,7 +1450,7 @@ GC_API void GC_CALL GC_win32_free_heap(void); */ #ifdef __cplusplus - } /* end of extern "C" */ + } /* end of extern "C" */ #endif -#endif /* _GC_H */ +#endif /* GC_H */