From c994c973c654817f5e764615776b78b84cd21910 Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Tue, 14 Mar 2006 19:58:14 +0000 Subject: [PATCH] Fix for nehemiah other fixes for gx2 ram init. support for sharplfg00l04 -- not working yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/amd/rumba/auto.c | 18 ++ src/mainboard/lippert/frontrunner/auto.c | 27 ++- src/mainboard/via/epia-m/mainboard.c | 5 + src/northbridge/amd/gx2/pll_reset.c | 9 +- src/northbridge/amd/gx2/raminit.c | 17 -- .../amd/cs5535/cs5535_early_setup.c | 5 + util/flashrom/flashchips.c | 2 +- util/flashrom/sharplhf00l04.c | 214 +++++++++++------- util/flashrom/sharplhf00l04.h | 39 ++++ 9 files changed, 231 insertions(+), 105 deletions(-) diff --git a/src/mainboard/amd/rumba/auto.c b/src/mainboard/amd/rumba/auto.c index 72d1ef4e0..19f7049c8 100644 --- a/src/mainboard/amd/rumba/auto.c +++ b/src/mainboard/amd/rumba/auto.c @@ -19,6 +19,24 @@ #include "southbridge/amd/cs5535/cs5535_early_smbus.c" #include "southbridge/amd/cs5535/cs5535_early_setup.c" #include "northbridge/amd/gx2/raminit.h" + +static void sdram_set_spd_registers(const struct mem_controller *ctrl) { + msr_t msr; + /* 1. Initialize GLMC registers base on SPD values, + * Hard coded as XpressROM for now */ + //print_debug("sdram_enable step 1\r\n"); + msr = rdmsr(0x20000018); + msr.hi = 0x10076013; + msr.lo = 0x00003000; + wrmsr(0x20000018, msr); + + msr = rdmsr(0x20000019); + msr.hi = 0x18000108; + msr.lo = 0x696332a3; + wrmsr(0x20000019, msr); + + +} #include "northbridge/amd/gx2/raminit.c" #include "sdram/generic_sdram.c" diff --git a/src/mainboard/lippert/frontrunner/auto.c b/src/mainboard/lippert/frontrunner/auto.c index 72d1ef4e0..5ad557629 100644 --- a/src/mainboard/lippert/frontrunner/auto.c +++ b/src/mainboard/lippert/frontrunner/auto.c @@ -19,11 +19,32 @@ #include "southbridge/amd/cs5535/cs5535_early_smbus.c" #include "southbridge/amd/cs5535/cs5535_early_setup.c" #include "northbridge/amd/gx2/raminit.h" + +/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */ +static void sdram_set_spd_registers(const struct mem_controller *ctrl) +{ + msr_t msr; + /* 1. Initialize GLMC registers base on SPD values, + * Hard coded as XpressROM for now */ + //print_debug("sdram_enable step 1\r\n"); + msr = rdmsr(0x20000018); + msr.hi = 0x10076013; + msr.lo = 0x3400; + wrmsr(0x20000018, msr); + + msr = rdmsr(0x20000019); + msr.hi = 0x18000008; + msr.lo = 0x696332a3; + wrmsr(0x20000019, msr); + +} + #include "northbridge/amd/gx2/raminit.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/gx2/pll_reset.c" + static void msr_init(void) { __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); @@ -63,15 +84,15 @@ static void main(unsigned long bist) console_init(); cs5535_early_setup(); - + print_err("done cs5535 early\n"); pll_reset(); - + print_err("done pll_reset\n"); /* Halt if there was a built in self test failure */ //report_bist_failure(bist); sdram_initialize(1, memctrl); - + print_err("Done sdram_initialize\n"); /* Check all of memory */ ram_check(0x00000000, 640*1024); diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c index 26e5916f0..da27732d6 100644 --- a/src/mainboard/via/epia-m/mainboard.c +++ b/src/mainboard/via/epia-m/mainboard.c @@ -30,6 +30,11 @@ void write_protect_vgabios(void) device_t dev; printk_info("write_protect_vgabios\n"); + /* there are two possible devices. Just do both. */ + dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0); + if(dev) + pci_write_config8(dev, 0x61, 0xaa); + dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0); if(dev) pci_write_config8(dev, 0x61, 0xaa); diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c index b84e62e8b..0e3a3caf9 100644 --- a/src/northbridge/amd/gx2/pll_reset.c +++ b/src/northbridge/amd/gx2/pll_reset.c @@ -122,9 +122,14 @@ static void pll_reset(void) /* get CPU core clock in MHZ */ cpu_core = calibrate_tsc(); - get_memory_speed(); + print_debug("Cpu core is "); + print_debug_hex32(cpu_core); + print_debug("\n"); + //get_memory_speed(); //msr = rdmsr(GLCP_SYS_RSTPLL); msr = rdmsr(0x4c000014); + print_debug("4c000014 is "); + print_debug_hex32(msr.hi); print_debug(":"); print_debug_hex32(msr.lo); print_debug("\n"); if (msr.lo & (1 << GLCP_SYS_RSTPLL_BYPASS)) { print_debug("disable PLL bypass\n\r"); @@ -162,7 +167,7 @@ static void pll_reset(void) print_debug("\n\r"); //gliu = get_memory_speed(); - get_memory_speed(); + //get_memory_speed(); //print_debug("Target Memory Clock "); //print_debug_hex32(gliu); //print_debug("\n\r"); diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c index 95ce72a10..a2cc474a3 100644 --- a/src/northbridge/amd/gx2/raminit.c +++ b/src/northbridge/amd/gx2/raminit.c @@ -4,10 +4,6 @@ static void sdram_set_registers(const struct mem_controller *ctrl) { } -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - -} /* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence * Section 4.1.4, GX/CS5535 GeodeROM Porting guide */ @@ -16,19 +12,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) int i; msr_t msr; - /* 1. Initialize GLMC registers base on SPD values, - * Hard coded as XpressROM for now */ - //print_debug("sdram_enable step 1\r\n"); - msr = rdmsr(0x20000018); - msr.hi = 0x10076013; - msr.lo = 0x00003000; - wrmsr(0x20000018, msr); - - msr = rdmsr(0x20000019); - msr.hi = 0x18000108; - msr.lo = 0x696332a3; - wrmsr(0x20000019, msr); - /* 2. clock gating for PMode */ msr = rdmsr(0x20002004); msr.lo &= ~0x04; diff --git a/src/southbridge/amd/cs5535/cs5535_early_setup.c b/src/southbridge/amd/cs5535/cs5535_early_setup.c index ae3b7df44..6c32498aa 100644 --- a/src/southbridge/amd/cs5535/cs5535_early_setup.c +++ b/src/southbridge/amd/cs5535/cs5535_early_setup.c @@ -103,10 +103,15 @@ static int cs5535_early_setup(void) print_debug("reboot from BIOS reset\n\r"); return; } + print_debug("Setup idsel\r\n"); cs5535_setup_idsel(); + print_debug("Setup iobase\r\n"); cs5535_setup_iobase(); + print_debug("Setup gpio\r\n"); cs5535_setup_gpio(); + print_debug("Setup cis_mode\r\n"); cs5535_setup_cis_mode(); + print_debug("Setup smbus\r\n"); cs5535_enable_smbus(); //get_memory_speed(); dummy(); diff --git a/util/flashrom/flashchips.c b/util/flashrom/flashchips.c index 08eb00cdd..f718e7b14 100644 --- a/util/flashrom/flashchips.c +++ b/util/flashrom/flashchips.c @@ -89,7 +89,7 @@ struct flashchip flashchips[] = { probe_md2802, erase_md2802, write_md2802, read_md2802}, #endif {"LHF00L04", SHARP_ID, SHARP_LHF00L04, NULL, 1024, 64 * 1024, - probe_82802ab, erase_82802ab, write_82802ab, NULL}, + probe_lhf00l04, erase_lhf00l04, write_lhf00l04, NULL}, {NULL,} }; diff --git a/util/flashrom/sharplhf00l04.c b/util/flashrom/sharplhf00l04.c index e7e5eedfe..5b485ada8 100644 --- a/util/flashrom/sharplhf00l04.c +++ b/util/flashrom/sharplhf00l04.c @@ -1,9 +1,8 @@ /* - * sst28sf040.c: driver for SST28SF040C flash models. + * lhf00l04.c: driver for programming JEDEC standard flash parts * * * Copyright 2000 Silicon Integrated System Corporation - * Copyright 2005 coresystems GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,111 +19,164 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * - * Reference: - * 8 MEgabit (1024K x 8) SHARP LHF00L04, data sheet + * Reference: http://www.intel.com/design/chipsets/datashts/290658.htm * + * $Id: lhf00l04.c 2111 2005-11-26 21:55:36Z ollie $ */ +#include +#include +#include +#include +#include #include -#include +#include + #include "flash.h" +#include "sharplhf00l04.h" #include "debug.h" - -#define AUTO_PG_ERASE1 0x20 -#define AUTO_PG_ERASE2 0xD0 -#define AUTO_PGRM 0x10 -#define CHIP_ERASE 0x30 -#define RESET 0xFF -#define READ_ID 0x90 - -static __inline__ void protect_lhf00l04(volatile uint8_t *bios) +// I need that Berkeley bit-map printer +void print_lhf00l04_status(uint8_t status) { - /* ask compiler not to optimize this */ -// volatile uint8_t tmp; - + printf("%s", status & 0x80 ? "Ready:" : "Busy:"); + printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:"); + printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:"); + printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:"); + printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:"); + printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:"); + printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:"); } -static __inline__ void unprotect_lhf00l04(volatile uint8_t *bios) +int probe_lhf00l04(struct flashchip *flash) { - /* ask compiler not to optimize this */ -// volatile uint8_t tmp; -} + volatile uint8_t *bios = flash->virt_addr; + uint8_t id1, id2; -static __inline__ int erase_sector_lhf00l04(volatile uint8_t *bios, - unsigned long address) -{ +#if 0 + *(volatile uint8_t *) (bios + 0x5555) = 0xAA; + *(volatile uint8_t *) (bios + 0x2AAA) = 0x55; + *(volatile uint8_t *) (bios + 0x5555) = 0x90; +#endif - return (0); -} + *bios = 0xff; + myusec_delay(10); + *bios = 0x90; + myusec_delay(10); -static __inline__ int write_sector_lhf00l04(volatile uint8_t *bios, - uint8_t *src, - volatile uint8_t *dst, - unsigned int page_size) -{ - int i; + id1 = *(volatile uint8_t *) bios; + id2 = *(volatile uint8_t *) (bios + 0x01); - for (i = 0; i < page_size; i++) { - /* transfer data from source to destination */ - if (*src == 0xFF) { - dst++, src++; - /* If the data is 0xFF, don't program it */ - continue; +#if 1 + *(volatile uint8_t *) (bios + 0x5555) = 0xAA; + *(volatile uint8_t *) (bios + 0x2AAA) = 0x55; + *(volatile uint8_t *) (bios + 0x5555) = 0xF0; + +#endif + myusec_delay(10); + + printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) { + size_t size = flash->total_size * 1024; + // we need to mmap the write-protect space. + bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED, + flash->fd_mem, (off_t) (0 - 0x400000 - size)); + if (bios == MAP_FAILED) { + // it's this part but we can't map it ... + perror("Error MMAP /dev/mem"); + exit(1); } - /*issue AUTO PROGRAM command */ - *dst = AUTO_PGRM; - *dst++ = *src++; - /* wait for Toggle bit ready */ -// toggle_ready_jedec(bios); + flash->virt_addr_2 = bios; + printf("bios %p, *bios 0x%x, bios[1] 0x%x\n", bios, *bios, bios[1]); + return 1; } - return (0); + return 0; } -int probe_lhf00l04(struct flashchip *flash) +uint8_t wait_lhf00l04(volatile uint8_t *bios) { - volatile uint8_t *bios = flash->virt_addr; - uint8_t id1, id2, tmp; - /* save the value at the beginning of the Flash */ - tmp = *bios; + uint8_t status; + uint8_t id1, id2; - *bios = RESET; - myusec_delay(10); + *bios = 0x70; + if ((*bios & 0x80) == 0) { // it's busy + while ((*bios & 0x80) == 0); + } + + status = *bios; - *bios = READ_ID; + // put another command to get out of status register mode + + *bios = 0x90; myusec_delay(10); + id1 = *(volatile uint8_t *) bios; - myusec_delay(10); id2 = *(volatile uint8_t *) (bios + 0x01); - *bios = RESET; - myusec_delay(10); - - printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); - if (id1 == flash->manufacture_id && id2 == flash->model_id) - return 1; + // this is needed to jam it out of "read id" mode + *(volatile uint8_t *) (bios + 0x5555) = 0xAA; + *(volatile uint8_t *) (bios + 0x2AAA) = 0x55; + *(volatile uint8_t *) (bios + 0x5555) = 0xF0; + return status; - /* if there is no lhf00l04, restore the original value */ - *bios = tmp; - return 0; } - +int erase_lhf00l04_block(struct flashchip *flash, int offset) +{ + volatile uint8_t *bios = flash->virt_addr + offset; + volatile uint8_t *wrprotect = + flash->virt_addr_2 + offset + 2; + uint8_t status; + + // clear status register + *bios = 0x50; + printf("Erase at %p\n", bios); + status = wait_lhf00l04(flash->virt_addr); + print_lhf00l04_status(status); + // clear write protect + printf("write protect is at %p\n", (wrprotect)); + printf("write protect is 0x%x\n", *(wrprotect)); + *(wrprotect) = 0; + printf("write protect is 0x%x\n", *(wrprotect)); + + // now start it + *(volatile uint8_t *) (bios) = 0x20; + *(volatile uint8_t *) (bios) = 0xd0; + myusec_delay(10); + // now let's see what the register is + status = wait_lhf00l04(flash->virt_addr); + print_lhf00l04_status(status); + printf("DONE BLOCK 0x%x\n", offset); + return (0); +} int erase_lhf00l04(struct flashchip *flash) { - volatile uint8_t *bios = flash->virt_addr; + int i; + unsigned int total_size = flash->total_size * 1024; - unprotect_lhf00l04(bios); - *bios = CHIP_ERASE; - *bios = CHIP_ERASE; - protect_lhf00l04(bios); + printf("total_size is %d; flash->page_size is %d\n", + total_size, flash->page_size); + for (i = 0; i < total_size; i += flash->page_size) + erase_lhf00l04_block(flash, i); + printf("DONE ERASE\n"); + return (0); +} - myusec_delay(10); -// toggle_ready_jedec(bios); +void write_page_lhf00l04(volatile uint8_t *bios, uint8_t *src, volatile uint8_t *dst, + int page_size) +{ + int i; + + for (i = 0; i < page_size; i++) { + /* transfer data from source to destination */ + *dst = 0x40; + *dst++ = *src++; + wait_lhf00l04(bios); + } - return (0); } int write_lhf00l04(struct flashchip *flash, uint8_t *buf) @@ -134,22 +186,20 @@ int write_lhf00l04(struct flashchip *flash, uint8_t *buf) flash->page_size; volatile uint8_t *bios = flash->virt_addr; - unprotect_lhf00l04(bios); - + erase_lhf00l04(flash); + if (*bios != 0xff) { + printf("ERASE FAILED\n"); + return -1; + } printf("Programming Page: "); for (i = 0; i < total_size / page_size; i++) { - /* erase the page before programming */ - erase_sector_lhf00l04(bios, i * page_size); - - /* write to the sector */ printf("%04d at address: 0x%08x", i, i * page_size); - write_sector_lhf00l04(bios, buf + i * page_size, - bios + i * page_size, page_size); - printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); + write_page_lhf00l04(bios, buf + i * page_size, + bios + i * page_size, page_size); + printf + ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); } printf("\n"); - protect_lhf00l04(bios); - return (0); } diff --git a/util/flashrom/sharplhf00l04.h b/util/flashrom/sharplhf00l04.h index d615dfa44..3b8852a82 100644 --- a/util/flashrom/sharplhf00l04.h +++ b/util/flashrom/sharplhf00l04.h @@ -4,5 +4,44 @@ extern int probe_lhf00l04(struct flashchip *flash); extern int erase_lhf00l04(struct flashchip *flash); extern int write_lhf00l04(struct flashchip *flash, uint8_t *buf); +extern __inline__ void toggle_ready_lhf00l04(volatile uint8_t *dst) +{ + unsigned int i = 0; + uint8_t tmp1, tmp2; + + tmp1 = *dst & 0x40; + + while (i++ < 0xFFFFFF) { + tmp2 = *dst & 0x40; + if (tmp1 == tmp2) { + break; + } + tmp1 = tmp2; + } +} + +extern __inline__ void data_polling_lhf00l04(volatile uint8_t *dst, uint8_t data) +{ + unsigned int i = 0; + uint8_t tmp; + + data &= 0x80; + + while (i++ < 0xFFFFFF) { + tmp = *dst & 0x80; + if (tmp == data) { + break; + } + } +} + +extern __inline__ void protect_lhf00l04(volatile uint8_t *bios) +{ + *(volatile uint8_t *) (bios + 0x5555) = 0xAA; + *(volatile uint8_t *) (bios + 0x2AAA) = 0x55; + *(volatile uint8_t *) (bios + 0x5555) = 0xA0; + + usleep(200); +} #endif /* !__SHARPLHF00L04_H__ */ -- 2.25.1