From bd88057f73b83e5bfd9d0fe57b28c87c98d73b12 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Tue, 12 Jun 2007 22:54:41 +0000 Subject: [PATCH] Add the AMD DB800 (AKA Salsa) mainboard. The DB800 is the AMD LX Reference Design Kit platform. For details see: http://www.amd.com/geodelxdb800 Signed-off-by: Marc Jones Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2718 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/amd/db800/Config.lb | 189 +++++++++++++++++++ src/mainboard/amd/db800/Options.lb | 179 ++++++++++++++++++ src/mainboard/amd/db800/cache_as_ram_auto.c | 132 +++++++++++++ src/mainboard/amd/db800/chip.h | 25 +++ src/mainboard/amd/db800/cmos.layout | 74 ++++++++ src/mainboard/amd/db800/failover.c | 32 ++++ src/mainboard/amd/db800/irq_tables.c | 106 +++++++++++ src/mainboard/amd/db800/mainboard.c | 193 ++++++++++++++++++++ targets/amd/db800/Config.lb | 49 +++++ 9 files changed, 979 insertions(+) create mode 100644 src/mainboard/amd/db800/Config.lb create mode 100644 src/mainboard/amd/db800/Options.lb create mode 100644 src/mainboard/amd/db800/cache_as_ram_auto.c create mode 100644 src/mainboard/amd/db800/chip.h create mode 100644 src/mainboard/amd/db800/cmos.layout create mode 100644 src/mainboard/amd/db800/failover.c create mode 100644 src/mainboard/amd/db800/irq_tables.c create mode 100644 src/mainboard/amd/db800/mainboard.c create mode 100644 targets/amd/db800/Config.lb diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb new file mode 100644 index 000000000..975def30c --- /dev/null +++ b/src/mainboard/amd/db800/Config.lb @@ -0,0 +1,189 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## + +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 +default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + + +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +if HAVE_PIRQ_TABLE + object irq_tables.o +end + +if USE_DCACHE_RAM + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end +end + + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +### Should this be in the northbridge code? +#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +# mainboardinit ./failover.inc +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +mainboardinit cpu/x86/fpu/enable_fpu.inc + +if USE_DCACHE_RAM + mainboardinit cpu/amd/model_lx/cache_as_ram.inc + mainboardinit ./cache_as_ram_auto.inc +end + +## +## Include the secondary Configuration files +## +dir /pc80 +config chip.h + +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000010da" + register "lpc_serirq_polarity" = "0x0000EF25" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "1" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci d.0 on end # Ethernet + device pci e.0 on end # Slot1 + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off end # Com2 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off end # HW Monitor + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end + diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb new file mode 100644 index 000000000..ea0e708fe --- /dev/null +++ b/src/mainboard/amd/db800/Options.lb @@ -0,0 +1,179 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HAVE_OPTION_TABLE +uses USE_OPTION_TABLE +uses CONFIG_ROM_PAYLOAD +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses LINUXBIOS_EXTRA_VERSION +uses ARCH +uses FALLBACK_SIZE +uses STACK_SIZE +uses HEAP_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD +uses PAYLOAD_SIZE +uses _ROMBASE +uses _RAMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses HAVE_MP_TABLE +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses CONFIG_VIDEO_MB +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE + +## ROM_SIZE is the size of boot ROM that this board will use. +default ROM_SIZE = 256*1024 + +### +### Build options +### +default CONFIG_CONSOLE_VGA=0 +default CONFIG_VIDEO_MB=8 +default CONFIG_PCI_ROM_RUN=0 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## no MP table +## +default HAVE_MP_TABLE=0 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=0 + +## Delay timer options +## +default CONFIG_UDELAY_TSC=1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=4 +#object irq_tables.o + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=0 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 +default FALLBACK_SIZE = 131072 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x08000 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 + +default _RAMBASE = 0x00004000 + +default CONFIG_ROM_PAYLOAD = 1 + +## +## The default compiler +## +default CROSS_COMPILE="" +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +end + diff --git a/src/mainboard/amd/db800/cache_as_ram_auto.c b/src/mainboard/amd/db800/cache_as_ram_auto.c new file mode 100644 index 000000000..215c58d53 --- /dev/null +++ b/src/mainboard/amd/db800/cache_as_ram_auto.c @@ -0,0 +1,132 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#include +#include +#include +#include +#include +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include +#include +#include "southbridge/amd/cs5536/cs5536.h" + +#define POST_CODE(x) outb(x, 0x80) +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/cs5536/cs5536_early_smbus.c" +#include "southbridge/amd/cs5536/cs5536_early_setup.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#define ManualConf 0 /* Do automatic strapped PLL config */ +#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ +#define PLLMSRlo 0x02000030 +#define DIMM0 0xA0 +#define DIMM1 0xA2 + +#include "northbridge/amd/lx/raminit.h" +#include "northbridge/amd/lx/pll_reset.c" +#include "northbridge/amd/lx/raminit.c" +#include "sdram/generic_sdram.c" +#include "cpu/amd/model_lx/cpureginit.c" +#include "cpu/amd/model_lx/syspreinit.c" + +static void msr_init(void) +{ + msr_t msr; + + /* Setup access to the cache for under 1MB. */ + msr.hi = 0x24fffc02; + msr.lo = 0x1000A000; /* 0-A0000 write back */ + wrmsr(CPU_RCONF_DEFAULT, msr); + + msr.hi = 0x0; /* Write back */ + msr.lo = 0x0; + wrmsr(CPU_RCONF_A0_BF, msr); + wrmsr(CPU_RCONF_C0_DF, msr); + wrmsr(CPU_RCONF_E0_FF, msr); + + /* Setup access to the cache for under 640K. Note MC not setup yet. */ + msr.hi = 0x20000000; + msr.lo = 0xfff80; + wrmsr(MSR_GLIU0 + 0x20, msr); + + msr.hi = 0x20000000; + msr.lo = 0x80fffe0; + wrmsr(MSR_GLIU0 + 0x21, msr); + + msr.hi = 0x20000000; + msr.lo = 0xfff80; + wrmsr(MSR_GLIU1 + 0x20, msr); + + msr.hi = 0x20000000; + msr.lo = 0x80fffe0; + wrmsr(MSR_GLIU1 + 0x21, msr); +} + +static void mb_gpio_init(void) +{ + /* Early mainboard specific GPIO setup. */ +} + +void cache_as_ram_main(void) +{ + POST_CODE(0x01); + + static const struct mem_controller memctrl[] = { + {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + mb_gpio_init(); + uart_init(); + console_init(); + + pll_reset(ManualConf); + + cpuRegInit(); + + sdram_initialize(1, memctrl); + + /* Check memory. */ + /* ram_check(0x00000000, 640 * 1024); */ + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ + return; +} diff --git a/src/mainboard/amd/db800/chip.h b/src/mainboard/amd/db800/chip.h new file mode 100644 index 000000000..912f36ad5 --- /dev/null +++ b/src/mainboard/amd/db800/chip.h @@ -0,0 +1,25 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_amd_db800_ops; + +struct mainboard_amd_db800_config { + int nothing; +}; diff --git a/src/mainboard/amd/db800/cmos.layout b/src/mainboard/amd/db800/cmos.layout new file mode 100644 index 000000000..5ba4c032c --- /dev/null +++ b/src/mainboard/amd/db800/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/src/mainboard/amd/db800/failover.c b/src/mainboard/amd/db800/failover.c new file mode 100644 index 000000000..c233eb92f --- /dev/null +++ b/src/mainboard/amd/db800/failover.c @@ -0,0 +1,32 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#include +#include +#include +#include +#include "pc80/mc146818rtc_early.c" + +static unsigned long main(unsigned long bist) +{ + return bist; +} diff --git a/src/mainboard/amd/db800/irq_tables.c b/src/mainboard/amd/db800/irq_tables.c new file mode 100644 index 000000000..a5e13cd05 --- /dev/null +++ b/src/mainboard/amd/db800/irq_tables.c @@ -0,0 +1,106 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include "../../../southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 10 +#define PIRQD 11 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * IRQ_SLOT_COUNT, /* there can be total 6 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Crap (miniport) */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x1, 0x0}, /* slot1 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + int i, j, k, num_entries; + unsigned char pirq[4]; + uint16_t chipset_irq_map; + uint32_t pciAddr, pirtable_end; + struct irq_routing_table *pirq_tbl; + + pirtable_end = copy_pirq_routing_table(addr); + + /* Set up chipset IRQ steering. */ + pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; + chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA); + printk_debug("%s(%08X, %04X)\n", __FUNCTION__, pciAddr, + chipset_irq_map); + outl(pciAddr & ~3, 0xCF8); + outl(chipset_irq_map, 0xCFC); + + pirq_tbl = (struct irq_routing_table *)(addr); + num_entries = (pirq_tbl->size - 32) / 16; + + /* Set PCI IRQs. */ + for (i = 0; i < num_entries; i++) { + printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i, + pirq_tbl->slots[i].devfn, pirq_tbl->slots[i].slot); + for (j = 0; j < 4; j++) { + printk_debug("INT: %c bitmap: %x ", 'A' + j, + pirq_tbl->slots[i].irq[j].bitmap); + for (k = 0; (!((pirq_tbl->slots[i].irq[j].bitmap >> k) & 1)) && (pirq_tbl->slots[i].irq[j].bitmap != 0); k++) ; /* Finds lsb in bitmap to IRQ#. */ + pirq[j] = k; + printk_debug("PIRQ: %d\n", k); + } + + /* Bus, device, slots IRQs for {A,B,C,D}. */ + pci_assign_irqs(pirq_tbl->slots[i].bus, + pirq_tbl->slots[i].devfn >> 3, pirq); + } + + /* Put the PIR table in memory and checksum. */ + return pirtable_end; +} diff --git a/src/mainboard/amd/db800/mainboard.c b/src/mainboard/amd/db800/mainboard.c new file mode 100644 index 000000000..1e417e244 --- /dev/null +++ b/src/mainboard/amd/db800/mainboard.c @@ -0,0 +1,193 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include "../../../southbridge/amd/cs5536/cs5536.h" +#include "chip.h" + +/* Print the platform configuration - do before PCI init or it will not + * work right. + */ +void print_conf(void) +{ +#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR + int i; + unsigned long iol; + msr_t msr; + + int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0, + CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, + CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM, + GLCP_DELAY_CONTROLS, GL_END + }; + + int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, + MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6, + GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM, + GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, + MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, + GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, + GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5, + GLIU0_GLD_MSR_COH, GL_END + }; + + int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, + MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, + MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, + MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0, + GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW, + GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0, + GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3, + GLIU1_GLD_MSR_COH, GL_END + }; + + int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, + CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END + }; + + int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, + MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, + MDD_IRQM_PRIM, GL_END + }; + + int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, + GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, + GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END + }; + + int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, + MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6, + MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END + }; + + printk_debug("---------- CPU ------------\n"); + + for (i = 0; cpu_msr_defs[i] != GL_END; i++) { + msr = rdmsr(cpu_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + cpu_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- GLIU 0 ------------\n"); + + for (i = 0; gliu0_msr_defs[i] != GL_END; i++) { + msr = rdmsr(gliu0_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + gliu0_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- GLIU 1 ------------\n"); + + for (i = 0; gliu1_msr_defs[i] != GL_END; i++) { + msr = rdmsr(gliu1_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + gliu1_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- RCONF ------------\n"); + + for (i = 0; rconf_msr[i] != GL_END; i++) { + msr = rdmsr(rconf_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], + msr.hi, msr.lo); + } + + printk_debug("---------- VARIA ------------\n"); + msr = rdmsr(0x51300010); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, + msr.lo); + + msr = rdmsr(0x51400015); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, + msr.lo); + + printk_debug("---------- DIVIL IRQ ------------\n"); + msr = rdmsr(MDD_IRQM_YLOW); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, + msr.lo); + msr = rdmsr(MDD_IRQM_YHIGH); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, + msr.hi, msr.lo); + msr = rdmsr(MDD_IRQM_ZLOW); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, + msr.lo); + msr = rdmsr(MDD_IRQM_ZHIGH); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, + msr.hi, msr.lo); + + printk_debug("---------- PCI ------------\n"); + + for (i = 0; pci_msr[i] != GL_END; i++) { + msr = rdmsr(pci_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], + msr.hi, msr.lo); + } + + printk_debug("---------- LPC/UART DMA ------------\n"); + + for (i = 0; dma_msr[i] != GL_END; i++) { + msr = rdmsr(dma_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], + msr.hi, msr.lo); + } + + printk_debug("---------- CS5536 ------------\n"); + + for (i = 0; cs5536_msr[i] != GL_END; i++) { + msr = rdmsr(cs5536_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], + msr.hi, msr.lo); + } + + iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", + GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol); + iol = inl(GPIOL_EVENTS_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", + GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol); + iol = inl(GPIOL_INPUT_INVERT_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", + GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol); + iol = inl(GPIO_MAPPER_X); + printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X, + iol); +#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR +} + +static void init(struct device *dev) +{ + printk_debug("AMD DB800 ENTER %s\n", __FUNCTION__); + printk_debug("AMD DB800 EXIT %s\n", __FUNCTION__); +} + +static void enable_dev(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_amd_db800_ops = { + CHIP_NAME("AMD DB800 Mainboard") + .enable_dev = enable_dev, + +}; diff --git a/targets/amd/db800/Config.lb b/targets/amd/db800/Config.lb new file mode 100644 index 000000000..d105a2341 --- /dev/null +++ b/targets/amd/db800/Config.lb @@ -0,0 +1,49 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# Config file for the AMD Geode LX/5536 DB800 platform. + +target db800 +mainboard amd/db800 + +# HACK to get the right TSC support. +option CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 + +option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0 +option CONFIG_COMPRESSED_PAYLOAD_LZMA=0 + +# Leave 36k for VSA. +option ROM_SIZE=512*1024-36*1024 +# option ROM_SIZE=256*1024-36*1024 +option FALLBACK_SIZE=ROM_SIZE + +option DEFAULT_CONSOLE_LOGLEVEL = 11 +option MAXIMUM_CONSOLE_LOGLEVEL = 11 +# option DEFAULT_CONSOLE_LOGLEVEL = 4 +# option MAXIMUM_CONSOLE_LOGLEVEL = 4 + +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=64*1024 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" + payload ../payload.elf +end + +buildrom ./db800.rom ROM_SIZE "fallback" -- 2.25.1