From a68555f48d06b4c8d55f7e4ca208805bec3d5512 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sat, 9 Jul 2011 20:22:21 -0400 Subject: [PATCH] Do full flush on uart8250 only at end of printk. The previous code does a full flush of the uart after every character. Unfortunately, this can cause transmission delays on some serial ports. This patch changes the code so that it does a flush at the end of every printk instead of at the end of every character. This reduces the time it takes to transmit serial messages (up to 9% on my Asrock e350m1 board). It also makes the transmission time more consistent which is important when performing timing tests via serial transmissions. Change-Id: I6b28488b905da68c6d68d7c517cc743cde567d70 Signed-off-by: Kevin O'Connor Reviewed-on: http://review.coreboot.org/90 Reviewed-by: Stefan Reinauer Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek Reviewed-by: Sven Schnelle --- src/arch/x86/lib/romstage_console.c | 19 ++++++++++++++++--- src/console/uart8250_console.c | 6 ++++++ src/console/uart8250mem_console.c | 6 ++++++ src/include/uart8250.h | 2 ++ src/lib/uart8250.c | 5 ++++- src/lib/uart8250mem.c | 5 ++++- 6 files changed, 38 insertions(+), 5 deletions(-) diff --git a/src/arch/x86/lib/romstage_console.c b/src/arch/x86/lib/romstage_console.c index a5f2e2b07..8adb3ba93 100644 --- a/src/arch/x86/lib/romstage_console.c +++ b/src/arch/x86/lib/romstage_console.c @@ -48,6 +48,19 @@ static void console_tx_byte(unsigned char byte) #endif } +static void console_tx_flush(void) +{ +#if CONFIG_CONSOLE_SERIAL8250MEM + uart8250_mem_tx_flush(CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000); +#endif +#if CONFIG_CONSOLE_SERIAL8250 + uart8250_tx_flush(CONFIG_TTYS0_BASE); +#endif +#if CONFIG_CONSOLE_NE2K + ne2k_transmit(CONFIG_CONSOLE_NE2K_IO_PORT); +#endif +} + int do_printk(int msg_level, const char *fmt, ...) { va_list args; @@ -60,8 +73,8 @@ int do_printk(int msg_level, const char *fmt, ...) va_start(args, fmt); i = vtxprintf(console_tx_byte, fmt, args); va_end(args); -#if CONFIG_CONSOLE_NE2K - ne2k_transmit(CONFIG_CONSOLE_NE2K_IO_PORT); -#endif + + console_tx_flush(); + return i; } diff --git a/src/console/uart8250_console.c b/src/console/uart8250_console.c index 4799ca66e..330ed684f 100644 --- a/src/console/uart8250_console.c +++ b/src/console/uart8250_console.c @@ -31,6 +31,11 @@ static void ttyS0_tx_byte(unsigned char data) uart8250_tx_byte(CONFIG_TTYS0_BASE, data); } +static void ttyS0_tx_flush(void) +{ + uart8250_tx_flush(CONFIG_TTYS0_BASE); +} + static unsigned char ttyS0_rx_byte(void) { return uart8250_rx_byte(CONFIG_TTYS0_BASE); @@ -44,6 +49,7 @@ static int ttyS0_tst_byte(void) static const struct console_driver uart8250_console __console = { .init = ttyS0_init, .tx_byte = ttyS0_tx_byte, + .tx_flush = ttyS0_tx_flush, .rx_byte = ttyS0_rx_byte, .tst_byte = ttyS0_tst_byte, }; diff --git a/src/console/uart8250mem_console.c b/src/console/uart8250mem_console.c index a6968ddc4..e622ad090 100644 --- a/src/console/uart8250mem_console.c +++ b/src/console/uart8250mem_console.c @@ -36,6 +36,11 @@ static void uartmem_tx_byte(unsigned char data) uart8250_mem_tx_byte(uart_bar, data); } +static void uartmem_tx_flush(void) +{ + uart8250_mem_tx_flush(uart_bar); +} + static unsigned char uartmem_rx_byte(void) { if (!uart_bar) @@ -55,6 +60,7 @@ static int uartmem_tst_byte(void) static const struct console_driver uart8250mem_console __console = { .init = uartmem_init, .tx_byte = uartmem_tx_byte, + .tx_flush = uartmem_tx_flush, .rx_byte = uartmem_rx_byte, .tst_byte = uartmem_tst_byte, }; diff --git a/src/include/uart8250.h b/src/include/uart8250.h index bbf2d8c8a..4a0217921 100644 --- a/src/include/uart8250.h +++ b/src/include/uart8250.h @@ -131,6 +131,7 @@ unsigned char uart8250_rx_byte(unsigned base_port); int uart8250_can_rx_byte(unsigned base_port); void uart8250_tx_byte(unsigned base_port, unsigned char data); +void uart8250_tx_flush(unsigned base_port); /* Yes it is silly to have three different uart init functions. But we used to * have three different sets of uart code, so it's an improvement. @@ -142,6 +143,7 @@ void uart_init(void); unsigned char uart8250_mem_rx_byte(unsigned base_port); int uart8250_mem_can_rx_byte(unsigned base_port); void uart8250_mem_tx_byte(unsigned base_port, unsigned char data); +void uart8250_mem_tx_flush(unsigned base_port); void uart8250_mem_init(unsigned base_port, unsigned divisor); u32 uart_mem_init(void); diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c index 64e8854ef..e7ddd0bfd 100644 --- a/src/lib/uart8250.c +++ b/src/lib/uart8250.c @@ -48,7 +48,10 @@ void uart8250_tx_byte(unsigned base_port, unsigned char data) { uart8250_wait_to_tx_byte(base_port); outb(data, base_port + UART_TBR); - /* Make certain the data clears the fifos */ +} + +void uart8250_tx_flush(unsigned base_port) +{ uart8250_wait_until_sent(base_port); } diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c index 918308ecd..e79cb6334 100644 --- a/src/lib/uart8250mem.c +++ b/src/lib/uart8250mem.c @@ -51,7 +51,10 @@ void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) { uart8250_mem_wait_to_tx_byte(base_port); write8(base_port + UART_TBR, data); - /* Make certain the data clears the FIFOs */ +} + +void uart8250_mem_tx_flush(unsigned base_port) +{ uart8250_mem_wait_until_sent(base_port); } -- 2.25.1