From 5e19eee460adb3e9a701eabfff0d127093e23c9c Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Fri, 16 Oct 2009 22:07:15 +0000 Subject: [PATCH] This is a snapshot as the availability of the systems for this project is now uncertain, and I can't invest the remaining time needed to get it done. Status is that memory is still not quite configured correctly. It is close but here are DRAM Row Boundary registers. Here is coreboot 60: 10 10 20 20 20 20 20 20 00 00 00 00 00 00 00 00 This is close. But: 60: 10 10 10 10 20 20 30 30 00 00 00 00 00 00 00 00 is the real hardware. So we are somehow missing those last slots. I think it's because the SPD connections and the chip connections differ, some dumping of RAM registers differ. But it's very close. This is under serialice. Once we get to this point we get stuck here: Copying coreboot to RAM. Copying coreboot to RAM. Copying coreboot to RAM. Forever. Here is the total config for 0:0.0 from coreboot: PCI: 00:00.00 00: 86 80 90 35 06 00 90 00 0c 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 41 10 00 00 00 00 00 00 00 00 00 00 00 50: 0c 60 2a 00 00 00 00 00 00 30 33 33 33 33 33 33 60: 10 10 20 20 20 20 20 20 00 00 00 00 00 00 00 00 70: 0a 0a 00 00 00 00 00 00 67 11 5e 55 1e 02 20 2c 80: 41 28 21 00 00 00 00 00 80 01 00 f0 00 00 00 00 90: 00 00 00 00 00 a1 04 39 aa aa 0c 30 5f 08 02 07 a0: 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 b0: 32 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 44 c0 50 11 00 c0 ff 03 00 00 df 03 20 00 00 e0 d0: 02 28 00 0e 07 00 00 00 00 00 93 b5 00 00 00 00 e0: 00 00 00 00 00 00 00 00 36 3c 00 00 00 00 00 00 f0: 00 00 00 00 3a 01 42 00 80 0f 0c 00 00 00 00 00 And from factory: 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09) 00: 86 80 90 35 46 01 90 00 09 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 6c 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 41 10 00 00 00 00 00 00 00 00 00 00 00 50: 0c 20 6a 00 00 00 00 00 00 10 11 11 01 00 00 10 60: 10 10 10 10 20 20 30 30 00 00 00 00 00 00 00 00 70: 0a 00 0a 0a 00 00 00 00 44 11 5e 55 1e 02 20 2c 80: 41 28 41 00 00 00 00 00 80 01 00 f0 88 00 00 00 90: 00 00 00 00 00 aa 04 39 aa aa 0c 30 75 08 12 07 a0: 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 b0: cc 00 99 55 00 00 00 00 00 00 00 00 00 00 00 00 c0: 44 c0 50 33 00 e0 60 00 67 00 28 00 30 00 00 e0 d0: 02 28 00 0e 03 00 00 00 00 00 93 b5 00 00 00 00 e0: 00 00 00 00 00 00 00 00 3a 3c 00 00 00 00 00 00 f0: 00 00 00 00 10 01 02 00 80 0f 0c 00 00 00 00 00 I want to commit this because even if I get no further, someone else might. Note that for serialice you need the following temporary patch as well: Index: src/superio/nsc/pc8374/pc8374_early_init.c =================================================================== --- src/superio/nsc/pc8374/pc8374_early_init.c (revision 4791) +++ src/superio/nsc/pc8374/pc8374_early_init.c (working copy) @@ -29,7 +29,8 @@ static void pc8374_enable_dev(device_t dev, unsigned iobase) { pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); +/* don't disable for now, it kills serialice */ + pnp_set_enable(dev, 1); Signed-off-by: Ronald G. Minnich Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4796 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/dell/s1850/Kconfig | 6 +++ src/mainboard/dell/s1850/auto.c | 15 ++++-- src/mainboard/dell/s1850/debug.c | 87 +++++++++----------------------- 3 files changed, 42 insertions(+), 66 deletions(-) diff --git a/src/mainboard/dell/s1850/Kconfig b/src/mainboard/dell/s1850/Kconfig index a74471d41..7f4942d7a 100644 --- a/src/mainboard/dell/s1850/Kconfig +++ b/src/mainboard/dell/s1850/Kconfig @@ -35,6 +35,12 @@ config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID default 0x016c depends on BOARD_DELL_S1850 +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1028 + depends on BOARD_DELL_S1850 + + config MAX_CPUS int default 2 diff --git a/src/mainboard/dell/s1850/auto.c b/src/mainboard/dell/s1850/auto.c index be8181215..16b564b02 100644 --- a/src/mainboard/dell/s1850/auto.c +++ b/src/mainboard/dell/s1850/auto.c @@ -61,6 +61,9 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } +/* this is very highly mainboard dependent, related to wiring */ +/* from factory BIOS via lspci */ +#define DIMM_MAP_LOGICAL 0x2841 #include "northbridge/intel/e7520/raminit.c" #include "lib/generic_sdram.c" @@ -184,6 +187,8 @@ static void main(unsigned long bist) .f1 = PCI_DEV(0, 0x00, 1), .f2 = PCI_DEV(0, 0x00, 2), .f3 = PCI_DEV(0, 0x00, 3), + /* the wiring on this part is really messed up */ + /* this is my best guess so far */ .channel0 = {(0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, (0xa<<3)|3, }, .channel1 = {(0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, (0xa<<3)|7, }, } @@ -331,24 +336,28 @@ static void main(unsigned long bist) #if 1 enable_smbus(); #endif -#if 1 +#if 0 // dump_spd_registers(&cpu[0]); int i; for(i = 0; i < 1; i++) { dump_spd_registers(); } +#endif +#if 1 + show_dram_slots(); #endif disable_watchdogs(); // dump_ipmi_registers(); mainboard_set_e7520_leds(); // memreset_setup(); + sdram_initialize(ARRAY_SIZE(mch), mch); -#if 1 +#if 0 dump_pci_devices(); #endif #if 1 dump_pci_device(PCI_DEV(0, 0x00, 0)); - dump_bar14(PCI_DEV(0, 0x00, 0)); +// dump_bar14(PCI_DEV(0, 0x00, 0)); #endif #if 1 // temporarily disabled diff --git a/src/mainboard/dell/s1850/debug.c b/src/mainboard/dell/s1850/debug.c index 554642115..766a819d5 100644 --- a/src/mainboard/dell/s1850/debug.c +++ b/src/mainboard/dell/s1850/debug.c @@ -205,69 +205,6 @@ static void dump_pci_devices(void) } } -#if 0 -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\r\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } - } -} -#endif - void dump_spd_registers(void) { unsigned device; @@ -301,6 +238,30 @@ void dump_spd_registers(void) } } +void show_dram_slots(void) +{ + unsigned device; + device = SMBUS_MEM_DEVICE_START; + while(device <= SMBUS_MEM_DEVICE_END) { + int status = 0; + int i; + print_debug("\r\n"); + print_debug("dimm "); + print_debug_hex8(device); + + status = smbus_read_byte(device, 0); + if (status < 0) { + print_debug("bad device: "); + } else { + print_debug("present: "); + } + print_debug_hex8(status); + print_debug("\r\n"); + device += SMBUS_MEM_DEVICE_INC; + print_debug("\n"); + } +} + void dump_ipmi_registers(void) { unsigned device; -- 2.25.1