From: arch import user (historical) Date: Wed, 6 Jul 2005 18:17:06 +0000 (+0000) Subject: Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-56 X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=commitdiff_plain;h=7dec0f9ac33b1053de5045d6d72d6f882e0c782a;p=coreboot.git Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-56 Creator: Yinghai Lu remove junk in s2885 cache_as_ram_auto.c git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c index 9ca2c4dc7..3d2707103 100644 --- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -13,16 +13,6 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif #include "northbridge/amd/amdk8/cpu_rev.c" #define K8_HT_FREQ_1G_SUPPORT 0 @@ -156,7 +146,6 @@ void amd64_main(unsigned long bist) } /* Is this a secondary cpu? */ -// post_code(0x21); if (!boot_cpu()) { if (last_boot_normal()) { goto normal_image; @@ -170,11 +159,9 @@ void amd64_main(unsigned long bist) enumerate_ht_chain(); - /* Setup the ck804 */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ -// post_code(0x22); if (bios_reset_detected() && last_boot_normal()) { goto normal_image; } @@ -186,13 +173,11 @@ void amd64_main(unsigned long bist) goto fallback_image; } normal_image: -// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist) /* inputs */ ); cpu_reset: -// post_code(0x24); #if 0 //CPU reset will reset memtroller ??? asm volatile ("jmp __cpu_reset" @@ -202,7 +187,6 @@ void amd64_main(unsigned long bist) #endif fallback_image: -// post_code(0x25); real_main(bist); } void real_main(unsigned long bist) @@ -265,7 +249,6 @@ void amd64_main(unsigned long bist) enable_lapic(); init_timer(); -// post_code(0x30); #if CONFIG_LOGICAL_CPUS==1 #if ENABLE_APIC_EXT_ID == 1 @@ -276,12 +259,10 @@ void amd64_main(unsigned long bist) #endif if(id.coreid == 0) { if (cpu_init_detected(id.nodeid)) { -// __asm__ volatile ("jmp __cpu_reset"); cpu_reset = 1; goto cpu_reset_x; } distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); } #else #if ENABLE_APIC_EXT_ID == 1 @@ -292,14 +273,12 @@ void amd64_main(unsigned long bist) #endif if (cpu_init_detected(nodeid)) { -// __asm__ volatile ("jmp __cpu_reset"); cpu_reset = 1; goto cpu_reset_x; } distinguish_cpu_resets(nodeid); #endif -// post_code(0x31); if (!boot_cpu() #if CONFIG_LOGICAL_CPUS==1 @@ -312,13 +291,11 @@ void amd64_main(unsigned long bist) } } -// post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); -// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -332,17 +309,9 @@ void amd64_main(unsigned long bist) needs_reset = setup_coherent_ht_domain(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched start_other_cores(); #endif -#if 0 - - // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec - needs_reset |= ht_setup_chains(2); -#else - // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); -#endif if (needs_reset) { print_info("ht reset -\r\n"); @@ -360,29 +329,6 @@ void amd64_main(unsigned long bist) memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 0 - dump_pci_devices(); -#endif - - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#endif - -#if 0 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x00100000); - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x80100000); -#endif #if 1 { diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb new file mode 100644 index 000000000..700fb43d4 --- /dev/null +++ b/src/mainboard/tyan/s4880/Config.lb @@ -0,0 +1,293 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 +default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +arch i386 end + + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +//object reset.o +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + + else + + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +else + + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + ## + ## Setup RAM + ## + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + mainboardinit arch/i386/lib/jmp_auto_out.inc + +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end +end + +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + + # ROMCC + mainboardinit arch/i386/lib/jmp_auto.inc + +end + +## +## Include the secondary Configuration files +## +if CONFIG_CHIP_NAME + config chip.h +end + +# sample config for tyan/s4880 +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on +# chip drivers/lsi/53c1030 +# device pci 4.0 on end +# device pci 4.1 on end +# register "fw_address" = "0xfff8c000" +# end + chip drivers/pci/onboard + device pci 9.0 on end + device pci 9.1 on end + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + end #pci_domain +end + diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb new file mode 100644 index 000000000..f3d73515e --- /dev/null +++ b/src/mainboard/tyan/s4880/Options.lb @@ -0,0 +1,256 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HARD_RESET_BUS +uses HARD_RESET_DEVICE +uses HARD_RESET_FUNCTION +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses K8_E0_MEM_HOLE_SIZEK + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +default FALLBACK_SIZE=131072 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Funky hard reset implementation +## +default HARD_RESET_BUS=3 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 + + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=22 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=8 +default CONFIG_MAX_PHYSICAL_CPUS=4 +default CONFIG_LOGICAL_CPUS=1 + +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + +#1G memory hole +default K8_E0_MEM_HOLE_SIZEK=0x100000 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_VENDOR="Tyan" +default MAINBOARD_PART_NUMBER="s4880" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c new file mode 100644 index 000000000..fc1bf58e9 --- /dev/null +++ b/src/mainboard/tyan/s4880/auto.c @@ -0,0 +1,332 @@ +#define ASSEMBLY 1 + +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* Look up a which bus a given node/link combination is on. + * return 0 when we can't find the answer. + */ +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} + +static void hard_reset(void) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3); + + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(dev, 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0); + + set_bios_reset(); + pci_write_config8(dev, 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +#if 0 +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + uint32_t ret=0x00010101; /* default row entry */ + +/* + (L1) (L2) + CPU3-------------CPU1 + (L0)| |(L0) + | | + | | + | | + | | + (L0)| |(L0) + CPU2-------------CPU0---------8131----------8111 + (L2) (L1) (L2) +*/ + + /* Link0 of CPU0 to Link0 of CPU1 */ + /* Link1 of CPU0 to Link2 of CPU2 */ + /* Link2 of CPU1 to Link1 of CPU3 */ + /* Link0 of CPU2 to Link0 of CPU3 */ + + static const unsigned int rows_4p[4][4] = { + { 0x00070101, 0x00010202, 0x00030404, 0x00010204 }, + { 0x00010202, 0x000b0101, 0x00010208, 0x00030808 }, + { 0x00030808, 0x00010208, 0x000b0101, 0x00010202 }, + { 0x00010204, 0x00030404, 0x00010202, 0x00070101 } + }; + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_4p[node][row]; + } + + return ret; +} +#endif + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + unsigned device=(ctrl->channel0[0])>>8; + smbus_write_byte(SMBUS_HUB , 0x01, device); + smbus_write_byte(SMBUS_HUB , 0x03, 0); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "northbridge/amd/amdk8/raminit.c" + +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 + +#define THIRD_CPU 1 +#define FOURTH_CPU 1 + +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU) + +#define RC0 ((1<<1)<<8) +#define RC1 ((1<<2)<<8) +#define RC2 ((1<<3)<<8) +#define RC3 ((1<<4)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 + +static void main(unsigned long bist) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, + .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { RC1|DIMM0, 0 , 0, 0 }, + .channel1 = { RC1|DIMM1, 0, 0, 0 }, + + }, +#endif + +#if THIRD_CPU + { + .node_id = 2, + .f0 = PCI_DEV(0, 0x1a, 0), + .f1 = PCI_DEV(0, 0x1a, 1), + .f2 = PCI_DEV(0, 0x1a, 2), + .f3 = PCI_DEV(0, 0x1a, 3), + .channel0 = { RC2|DIMM0, 0, 0, 0 }, + .channel1 = { RC2|DIMM1, 0, 0, 0 }, + + }, +#endif +#if FOURTH_CPU + { + .node_id = 3, + .f0 = PCI_DEV(0, 0x1b, 0), + .f1 = PCI_DEV(0, 0x1b, 1), + .f2 = PCI_DEV(0, 0x1b, 2), + .f3 = PCI_DEV(0, 0x1b, 3), + .channel0 = { RC3|DIMM0, 0, 0, 0 }, + .channel1 = { RC3|DIMM1, 0, 0, 0 }, + + }, +#endif + }; + int i; + int needs_reset; +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); +#endif + + enable_lapic(); + init_timer(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(id.nodeid); +// start_other_core(id.nodeid); + } +#else + nodeid = lapicid(); + if (cpu_init_detected(nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(nodeid); +#endif + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s4880_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + +#if 0 + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); +#else + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); +#endif + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +} diff --git a/src/mainboard/tyan/s4880/cache_as_ram_auto.c b/src/mainboard/tyan/s4880/cache_as_ram_auto.c new file mode 100644 index 000000000..f39ff15b4 --- /dev/null +++ b/src/mainboard/tyan/s4880/cache_as_ram_auto.c @@ -0,0 +1,484 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* Look up a which bus a given node/link combination is on. + * return 0 when we can't find the answer. + */ +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} + +static void hard_reset(void) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3); + + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(dev, 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0); + + set_bios_reset(); + pci_write_config8(dev, 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + int ret; + unsigned device=(ctrl->channel0[0])>>8; + smbus_write_byte(SMBUS_HUB, 0x01, device); + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#else +#include "cpu/amd/model_fxx/node_id.c" +#endif +#define FIRST_CPU 1 +#define SECOND_CPU 1 + +#define THIRD_CPU 1 +#define FOURTH_CPU 1 + +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU) + +#define RC0 ((1<<2)<<8) +#define RC1 ((1<<1)<<8) +#define RC2 ((1<<4)<<8) +#define RC3 ((1<<3)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, + .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 }, + .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 }, + + }, +#endif + +#if THIRD_CPU + { + .node_id = 2, + .f0 = PCI_DEV(0, 0x1a, 0), + .f1 = PCI_DEV(0, 0x1a, 1), + .f2 = PCI_DEV(0, 0x1a, 2), + .f3 = PCI_DEV(0, 0x1a, 3), + .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 }, + .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 }, + + }, +#endif +#if FOURTH_CPU + { + .node_id = 3, + .f0 = PCI_DEV(0, 0x1b, 0), + .f1 = PCI_DEV(0, 0x1b, 1), + .f2 = PCI_DEV(0, 0x1b, 2), + .f3 = PCI_DEV(0, 0x1b, 3), + .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 }, + .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 }, + + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s4880_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + +#if 1 + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "subl %0, %%ebp\n\t" + "subl %0, %%esp\n\t" + ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- _RAMBASE ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s4880/chip.h b/src/mainboard/tyan/s4880/chip.h new file mode 100644 index 000000000..65d6d96c1 --- /dev/null +++ b/src/mainboard/tyan/s4880/chip.h @@ -0,0 +1,6 @@ +extern struct chip_operations mainboard_tyan_s4880_ops; + +struct mainboard_tyan_s4880_config { + int fixup_scsi; +// int fixup_vga; +}; diff --git a/src/mainboard/tyan/s4880/cmos.layout b/src/mainboard/tyan/s4880/cmos.layout new file mode 100644 index 000000000..c1f3d7531 --- /dev/null +++ b/src/mainboard/tyan/s4880/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/tyan/s4880/failover.c b/src/mainboard/tyan/s4880/failover.c new file mode 100644 index 000000000..39758aefa --- /dev/null +++ b/src/mainboard/tyan/s4880/failover.c @@ -0,0 +1,88 @@ +#define ASSEMBLY 1 +#include +#include +#include +#include +#include +#include +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#if CONFIG_LOGICAL_CPUS==1 +#include "cpu/amd/dualcore/dualcore_id.c" +#endif + + +static unsigned long main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ + enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else + nodeid = lapicid(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: +#if 0 + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); +#endif + fallback_image: + return bist; +} diff --git a/src/mainboard/tyan/s4880/irq_tables.c b/src/mainboard/tyan/s4880/irq_tables.c new file mode 100644 index 000000000..dd293ca96 --- /dev/null +++ b/src/mainboard/tyan/s4880/irq_tables.c @@ -0,0 +1,46 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*22, /* there can be total 22 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x7400, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0}, + {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0}, + {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, + {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, + {0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, + {0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, + {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + {0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + } +}; diff --git a/src/mainboard/tyan/s4880/mainboard.c b/src/mainboard/tyan/s4880/mainboard.c new file mode 100644 index 000000000..b13dd9f70 --- /dev/null +++ b/src/mainboard/tyan/s4880/mainboard.c @@ -0,0 +1,12 @@ +#include +#include +#include +#include +#include +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_tyan_s4880_ops = { + CHIP_NAME("Tyan s4880 mainboard") +}; +#endif diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c new file mode 100644 index 000000000..a7ad8cc04 --- /dev/null +++ b/src/mainboard/tyan/s4880/mptable.c @@ -0,0 +1,259 @@ +#include +#include +#include +#include +#include +#if CONFIG_LOGICAL_CPUS==1 +#include +#endif + +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + device_t dev; + unsigned reg; + + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + return 0; + } + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + uint32_t config_map; + unsigned dst_node; + unsigned dst_link; + unsigned bus_base; + config_map = pci_read_config32(dev, reg); + if ((config_map & 3) != 3) { + continue; + } + dst_node = (config_map >> 4) & 7; + dst_link = (config_map >> 8) & 3; + bus_base = (config_map >> 16) & 0xff; +#if 0 + printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + dst_node, dst_link, bus_base, + reg, config_map); +#endif + if ((dst_node == node) && (dst_link == link)) + { + return bus_base; + } + } + return 0; +} + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S4880 "; + struct mp_config_table *mc; + + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_chain_0; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_1; + unsigned apicid_base; + unsigned apicid_8111; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + + { + device_t dev; + + /* HT chain 0 */ + bus_chain_0 = node_link_to_bus(0, 2); + if (bus_chain_0 == 0) { + printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + bus_chain_0 = 1; + } + + /* 8111 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 4; + bus_isa = 5; + } + /* 8131-1 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + + bus_8131_1 = 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8131_2 = 3; + } + } + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_8111 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; + + smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); + { + device_t dev; + struct resource *res; + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); + } + } + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); + } + } + + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, apicid_8111, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, apicid_8111, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, apicid_8111, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, apicid_8111, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); + + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); + + +//On Board AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); + +//On Board Via USB 1.1 and 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2 + +//Slot 5 PCI 32 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); // + + +//On Board SI Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13); +//On Board ATI Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); + + +//Slot 4 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// + +//Slot 3 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);// + +//On Board LSI scsi and NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1); + +//Slot 2 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // + +//Slot 1 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);// + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/tyan/s4880/resourcemap.c b/src/mainboard/tyan/s4880/resourcemap.c new file mode 100644 index 000000000..d9315a026 --- /dev/null +++ b/src/mainboard/tyan/s4880/resourcemap.c @@ -0,0 +1,264 @@ +/* + * Tyan S4880 needs a different resource map + * + */ + +static void setup_s4880_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} +