From: Stefan Reinauer Date: Tue, 29 Aug 2006 17:41:14 +0000 (+0000) Subject: merge latest code from Uwe Hermann X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=commitdiff_plain;h=61be08bd3e7f411ffb544d3ded2ae14ca225e982;p=coreboot.git merge latest code from Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- diff --git a/src/superio/ite/it8671f/it8671f.h b/src/superio/ite/it8671f/it8671f.h index 1c44bfe47..98ef0f75a 100644 --- a/src/superio/ite/it8671f/it8671f.h +++ b/src/superio/ite/it8671f/it8671f.h @@ -16,11 +16,10 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* TODO: Find datasheet and check for correct values. */ #define IT8671F_FDC 0x00 /* Floppy */ -/* #define IT8671F_PP 0x01 */ /* Parallel port */ +#define IT8671F_SP1 0x01 /* Com1 */ #define IT8671F_SP2 0x02 /* Com2 */ -#define IT8671F_SP1 0x03 /* Com1 */ -#define IT8671F_KBCK 0x06 /* Keyboard */ -/* #define IT8671F_FAN 0x09 */ +#define IT8671F_PP 0x03 /* Parallel port */ +#define IT8671F_KBCK 0x05 /* Keyboard */ +#define IT8671F_KBCM 0x06 /* Mouse */ diff --git a/src/superio/ite/it8671f/it8671f_early_serial.c b/src/superio/ite/it8671f/it8671f_early_serial.c index f8319c3aa..31ea97f50 100644 --- a/src/superio/ite/it8671f/it8671f_early_serial.c +++ b/src/superio/ite/it8671f/it8671f_early_serial.c @@ -20,18 +20,18 @@ #include "it8671f.h" /* The base address is 0x3f0, 0x3bd, or 0x370, depending on config bytes. */ -#define SIO_BASE 0x3f0 -#define SIO_INDEX SIO_BASE -#define SIO_DATA SIO_BASE+1 +#define SIO_BASE 0x3f0 +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 -/* TODO: These values are actually from the IT8673F datasheet; check if - they're also valid for the IT8671F. */ -#define IT8671F_CONFIG_REG_CC 0x02 /* Configure Control. */ -#define IT8671F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8671F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8671F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */ +/* Global Configuration Registers. */ +#define IT8671F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8671F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8671F_CONFIG_REG_LDE 0x23 /* PnP Logical Device Enable. */ +#define IT8671F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */ -#define IT8671F_ADDRESS_PORT 0x279 +#define IT8671F_CONFIGURATION_PORT 0x0279 /* Write-only. */ +#define IT8671F_WRITE_DATA_PORT 0x0A79 /* Write-only. */ /* Special values used for entering MB PnP mode. The first four bytes of * each line determine the address port, the last four are data. */ @@ -42,7 +42,7 @@ static const uint8_t init_values[] = { 0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39, }; -/* The content of IT8671F_CONFIG_REG_LDN (index 07h) must be set to the +/* The content of IT8671F_CONFIG_REG_LDN (index 0x07) must be set to the * LDN the register belongs to, before you can access the register. */ static void it8671f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { @@ -63,10 +63,10 @@ static void it8671f_enable_serial(device_t dev, unsigned iobase) /* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ /* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ /* Base address 0x370: 0x86 0x80 0xaa 0x55. */ - outb(0x86, IT8671F_ADDRESS_PORT); - outb(0x80, IT8671F_ADDRESS_PORT); - outb(0x55, IT8671F_ADDRESS_PORT); - outb(0x55, IT8671F_ADDRESS_PORT); + outb(0x86, IT8671F_CONFIGURATION_PORT); + outb(0x80, IT8671F_CONFIGURATION_PORT); + outb(0x55, IT8671F_CONFIGURATION_PORT); + outb(0x55, IT8671F_CONFIGURATION_PORT); /* Sequentially write the 32 special values. */ for (i = 0; i < 32; i++) { @@ -75,14 +75,20 @@ static void it8671f_enable_serial(device_t dev, unsigned iobase) /* (2) Modify the data of configuration registers. */ - /* Enable parallel port, serial port 1, serial port 2, floppy. */ - it8671f_sio_write(0x00, 0x23, 0x0f); + /* Allow all devices to be enabled. Bits: FDC (0), Com1 (1), Com2 (2), + PP (3), Reserved (4), KBCK (5), KBCM (6), Reserved (7). */ + it8671f_sio_write(0x00, IT8671F_CONFIG_REG_LDE, 0x6f); - /* Activate serial port 1 and 2. */ - it8671f_sio_write(0x01, 0x30, 0x1); - it8671f_sio_write(0x02, 0x30, 0x1); + /* Activate all devices. */ + it8671f_sio_write(IT8671F_FDC, 0x30, 0x01); /* Floppy */ + it8671f_sio_write(IT8671F_SP1, 0x30, 0x01); /* Serial port 1 */ + it8671f_sio_write(IT8671F_SP2, 0x30, 0x01); /* Serial port 2 */ + it8671f_sio_write(IT8671F_PP, 0x30, 0x01); /* Parallel port */ + it8671f_sio_write(IT8671F_KBCK, 0x30, 0x01); /* Keyboard */ + it8671f_sio_write(IT8671F_KBCM, 0x30, 0x01); /* Mouse */ - /* Select 24MHz CLKIN and clear software suspend mode. */ + /* Select 24MHz CLKIN (clear bit 6) and clear software suspend + mode (clear bit 0). */ it8671f_sio_write(0x00, IT8671F_CONFIG_REG_SWSUSP, 0x00); /* (3) Exit the configuration state (MB PnP mode). */ diff --git a/src/superio/ite/it8671f/superio.c b/src/superio/ite/it8671f/superio.c index ca2811ab8..cc9f65e32 100644 --- a/src/superio/ite/it8671f/superio.c +++ b/src/superio/ite/it8671f/superio.c @@ -33,8 +33,7 @@ static void init(device_t dev) conf = dev->chip_info; switch (dev->path.u.pnp.device) { - case IT8671F_FDC: - /* TODO. */ + case IT8671F_FDC: /* TODO. */ break; case IT8671F_SP1: res0 = find_resource(dev, PNP_IDX_IO0); @@ -44,11 +43,15 @@ static void init(device_t dev) res0 = find_resource(dev, PNP_IDX_IO0); init_uart8250(res0->base, &conf->com2); break; + case IT8671F_PP: /* TODO. */ + break; case IT8671F_KBCK: res0 = find_resource(dev, PNP_IDX_IO0); res1 = find_resource(dev, PNP_IDX_IO1); init_pc_keyboard(res0->base, res1->base, &conf->keyboard); break; + case IT8671F_KBCM: /* TODO. */ + break; } } @@ -60,12 +63,10 @@ static struct device_operations ops = { .init = init, }; -/* TODO: Find and check datasheet. */ +/* TODO: FDC, PP, KBCM. */ static struct pnp_info pnp_dev_info[] = { - { &ops, IT8671F_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07fa, 0}, }, - /* { &ops, IT8671F_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x04f8, 0}, }, */ - { &ops, IT8671F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, }, { &ops, IT8671F_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, IT8671F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, }, { &ops, IT8671F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, }, }; diff --git a/src/superio/ite/it8718f/Config.lb b/src/superio/ite/it8718f/Config.lb new file mode 100644 index 000000000..f62a567d6 --- /dev/null +++ b/src/superio/ite/it8718f/Config.lb @@ -0,0 +1,2 @@ +config chip.h +object superio.o diff --git a/src/superio/ite/it8718f/chip.h b/src/superio/ite/it8718f/chip.h new file mode 100644 index 000000000..98cc75bfc --- /dev/null +++ b/src/superio/ite/it8718f/chip.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2006 Uwe Hermann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SUPERIO_ITE_IT8718F +#define _SUPERIO_ITE_IT8718F + +#include +#include + +extern struct chip_operations superio_ITE_it8718f_ops; + +struct superio_ITE_it8718f_config { + struct uart8250 com1, com2; + struct pc_keyboard keyboard; +}; + +#endif /* _SUPERIO_ITE_IT8718F */ + diff --git a/src/superio/ite/it8718f/it8718f.h b/src/superio/ite/it8718f/it8718f.h new file mode 100644 index 000000000..f42197c7f --- /dev/null +++ b/src/superio/ite/it8718f/it8718f.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2006 Uwe Hermann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8718_2.asp */ +/* Status: untested on real hardware, but it compiles. */ + +#define IT8718F_FDC 0x00 /* Floppy */ +#define IT8718F_SP1 0x01 /* Com1 */ +#define IT8718F_SP2 0x02 /* Com2 */ +#define IT8718F_PP 0x03 /* Parallel port */ +#define IT8718F_EC 0x04 /* Environment controller */ +#define IT8718F_KBCK 0x05 /* Keyboard */ +#define IT8718F_KBCM 0x06 /* Mouse */ +#define IT8718F_IR 0x0a /* Consumer IR */ + diff --git a/src/superio/ite/it8718f/it8718f_early_serial.c b/src/superio/ite/it8718f/it8718f_early_serial.c new file mode 100644 index 000000000..0a7964fbb --- /dev/null +++ b/src/superio/ite/it8718f/it8718f_early_serial.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2006 Uwe Hermann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include "it8718f.h" + +/* The base address is 0x2e or 0x4e, depending on config bytes. */ +#define SIO_BASE 0x2e +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global Configuration Registers. */ +#define IT8718F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8718F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8718F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ +#define IT8718F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ +#define IT8718F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ + +#define IT8718F_CONFIGURATION_PORT 0x2e /* Write-only. */ + +/* The content of IT8718F_CONFIG_REG_LDN (index 0x07) must be set to the + * LDN the register belongs to, before you can access the register. */ +static void it8718f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(IT8718F_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +/* Enable the peripheral devices on the IT8718F Super IO chip. */ +static void it8718f_enable_serial(device_t dev, unsigned iobase) +{ + /* (1) Enter the configuration state (MB PnP mode). */ + + /* Perform MB PnP setup to put the SIO chip at 0x2e. */ + /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ + /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ + outb(0x87, IT8718F_CONFIGURATION_PORT); + outb(0x01, IT8718F_CONFIGURATION_PORT); + outb(0x55, IT8718F_CONFIGURATION_PORT); + outb(0x55, IT8718F_CONFIGURATION_PORT); + + /* (2) Modify the data of configuration registers. */ + + /* Select the chip to configure (if there's more than one). + * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + * If this register is not written, both chips are configured. */ + /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ + + /* Enable all devices. */ + it8718f_sio_write(IT8718F_FDC, 0x30, 0x1); /* Floppy */ + it8718f_sio_write(IT8718F_SP1, 0x30, 0x1); /* Serial port 1 */ + it8718f_sio_write(IT8718F_SP2, 0x30, 0x1); /* Serial port 2 */ + it8718f_sio_write(IT8718F_PP, 0x30, 0x1); /* Parallel port */ + it8718f_sio_write(IT8718F_EC, 0x30, 0x1); /* Environment controller */ + it8718f_sio_write(IT8718F_KBCK, 0x30, 0x1); /* Keyboard */ + it8718f_sio_write(IT8718F_KBCM, 0x30, 0x1); /* Mouse */ + it8718f_sio_write(IT8718F_IR, 0x30, 0x1); /* Consumer IR */ + + /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ + /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CLOCKSEL, 0x00); */ + + /* Clear software suspend mode (clear bit 0). TODO: Needed? */ + /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ + + /* (3) Exit the configuration state (MB PnP mode). */ + it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CC, 0x02); +} + diff --git a/src/superio/ite/it8718f/superio.c b/src/superio/ite/it8718f/superio.c new file mode 100644 index 000000000..9907fdb16 --- /dev/null +++ b/src/superio/ite/it8718f/superio.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2006 Uwe Hermann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include "chip.h" +#include "it8718f.h" + +static void init(device_t dev) +{ + struct superio_ITE_it8718f_config *conf; + struct resource *res0, *res1; + + if (!dev->enabled) { + return; + } + + conf = dev->chip_info; + + switch (dev->path.u.pnp.device) { + case IT8718F_FDC: /* TODO. */ + break; + case IT8718F_SP1: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com1); + break; + case IT8718F_SP2: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com2); + break; + case IT8718F_PP: /* TODO. */ + break; + case IT8718F_EC: /* TODO. */ + break; + case IT8718F_KBCK: + res0 = find_resource(dev, PNP_IDX_IO0); + res1 = find_resource(dev, PNP_IDX_IO1); + init_pc_keyboard(res0->base, res1->base, &conf->keyboard); + break; + case IT8718F_KBCM: /* TODO. */ + break; + case IT8718F_IR: /* TODO. */ + break; + } +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = pnp_set_resources, + .enable_resources = pnp_enable_resources, + .enable = pnp_enable, + .init = init, +}; + +/* TODO: FDC, PP, EC, KBCM, IR. */ +static struct pnp_info pnp_dev_info[] = { + { &ops, IT8718F_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, IT8718F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, }, + { &ops, IT8718F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, }, +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &pnp_ops, + sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); +} + +struct chip_operations superio_ITE_it8718f_ops = { + CHIP_NAME("ITE it8718f") + .enable_dev = enable_dev, +}; +