From: Kyösti Mälkki Date: Mon, 5 Mar 2012 07:25:12 +0000 (+0200) Subject: Fix address of IDT in real-mode entry X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=commitdiff_plain;ds=sidebyside;h=7863015c3eabe94c360ff893723f48af23a47a33;p=coreboot.git Fix address of IDT in real-mode entry In a case of CS & 0x0fff != 0x0, lidt memory operand does not point to nullidt, this can raise an exception and shutdown the CPU. When an AP CPU receives 8-bit Start-Up IPI vector yzH, it starts execute at physical address 000yz000H. Seems this translates to either yz00:0000 or y000:z000 (CS:IP), depending of the CPU model. With the change entry16.inc is relocatable as the commentary suggests and can be used as ap_sipi_vector on SMP systems. Change-Id: I885a2888179700ba6e2b11d4f2d6a64ddea4c2dc Signed-off-by: Kyösti Mälkki Reviewed-on: http://review.coreboot.org/707 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering Reviewed-by: Ronald G. Minnich Reviewed-by: Patrick Georgi --- diff --git a/src/cpu/x86/16bit/entry16.inc b/src/cpu/x86/16bit/entry16.inc index 0fa8c1152..e4613bf98 100644 --- a/src/cpu/x86/16bit/entry16.inc +++ b/src/cpu/x86/16bit/entry16.inc @@ -57,13 +57,6 @@ _start: * entry16.inc. */ - /* Load an IDT with NULL limit to prevent the 16bit IDT being used - * in protected mode before c_start.S sets up a 32bit IDT when entering - * ram stage. - */ - movw $nullidt_offset, %bx - lidt %cs:(%bx) - /* Note: gas handles memory addresses in 16 bit code very poorly. * In particular it doesn't appear to have a directive allowing you * associate a section or even an absolute offset with a segment register. @@ -98,10 +91,18 @@ _start: * the low 16 bits. This means that the intial segment used * when start is called must be 64K aligned. This should not * restrict the address as the ip address can be anything. + * + * Also load an IDT with NULL limit to prevent the 16bit IDT being used + * in protected mode before c_start.S sets up a 32bit IDT when entering + * ram stage. In practise: CPU will shutdown on any exception. + * See IA32 manual Vol 3A 19.26 Interrupts. */ movw %cs, %ax shlw $4, %ax + movw $nullidt_offset, %bx + subw %ax, %bx + lidt %cs:(%bx) movw $gdtptr16_offset, %bx subw %ax, %bx data32 lgdt %cs:(%bx)