Change all printk_raminit to printk_spew.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4343
2b7e53f0-3cfb-0310-b3e9-
8179ed1497e1
/* Now set top of memory */
msr_t msr;
if (tom_k > (4*1024*1024)) {
/* Now set top of memory */
msr_t msr;
if (tom_k > (4*1024*1024)) {
- printk_raminit("Handling memory mapped above 4 GB\n");
- printk_raminit("Upper RAM end at 0x%08x kB\n", tom_k);
+ printk_spew("Handling memory mapped above 4 GB\n");
+ printk_spew("Upper RAM end at 0x%08x kB\n", tom_k);
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM2, msr);
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM2, msr);
- printk_raminit("Correcting memory amount mapped below 4 GB\n");
+ printk_spew("Correcting memory amount mapped below 4 GB\n");
}
/* Leave a 64M hole between TOP_MEM and TOP_MEM2
}
/* Leave a 64M hole between TOP_MEM and TOP_MEM2
} else
#endif
tom_k = 0x3f0000;
} else
#endif
tom_k = 0x3f0000;
- printk_raminit("Adjusting lower RAM end\n");
+ printk_spew("Adjusting lower RAM end\n");
- printk_raminit("Lower RAM end at 0x%08x kB\n", tom_k);
+ printk_spew("Lower RAM end at 0x%08x kB\n", tom_k);
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM, msr);
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM, msr);
return;
hw_spd_err:
/* Unrecoverable error reading SPD data */
return;
hw_spd_err:
/* Unrecoverable error reading SPD data */
- print_err("SPD error - reset\n");
+ printk_err("SPD error - reset\n");
hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
- printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
+ printk_spew("Handling memory hole at 0x%08x (default)\n", hole_startk);
#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
/* We need to double check if hole_startk is valid.
* If it is equal to the dram base address in K (base_k),
#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
/* We need to double check if hole_startk is valid.
* If it is equal to the dram base address in K (base_k),
- printk_raminit("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
+ printk_spew("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
#endif
/* Find node number that needs the memory hole configured */
for (i=0; i<controllers; i++) {
#endif
/* Find node number that needs the memory hole configured */
for (i=0; i<controllers; i++) {