X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=dd5d6ea931dd9bccab5a206000c8b2a3fa7cafa6;hb=b8a70633ee506d75339fcc302bdc361ec304bd1f;hp=afbcbe4a3485db4683a1e63f392fa1b3bd51ce19;hpb=7df1edb6a20980d0069d5fff5d119d7498259c8f;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index afbcbe4..dd5d6ea 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -1,15 +1,10 @@ -#!/bin/bash +#!/bin/sh # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# -# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew # Stop if any command fails set -e @@ -19,57 +14,81 @@ set -e # You probably want to customize those ############################################################################## TARGET=arm-none-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/sat # Install location of your final toolchain +[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain +[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed # Set to 'sudo' if you need superuser privileges while installing -SUDO= +SUDO='' # Set to 1 to be quieter while running QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc USE_LINARO=0 +# Set to 1 to enable C++ +USE_CPP=0 +# Set to 1 to enable building of OpenOCD +OOCD_EN=0 # Set to 1 to build libstm32 provided by ST LIBSTM32_EN=0 # Set to 1 to build libopenstm32 an open source library for stm32 LIBOPENSTM32_EN=0 # Make the gcc default to Cortex-M3 -DEFAULT_TO_CORTEX_M3=0 +DEFAULT_TO_CORTEX_M3=1 ############################################################################## # Version and download url settings section ############################################################################## -if [ ${USE_LINARO} == 0 ] ; then +if [ ${USE_LINARO} = 0 ] ; then # For FSF GCC: - GCCVERSION=4.5.1 - GCC=gcc-${GCCVERSION} - GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz + GCCVERSION=4.6.1 + if [ ${USE_CPP} = 0 ]; then + GCC=gcc-core-${GCCVERSION} + GCCDIR=gcc-${GCCVERSION} + else + GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} + fi + GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2 else # For the Linaro GCC: - GCCVERSION=4.5-2010.08-1 - GCC=gcc-linaro-${GCCVERSION} - GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 fi -BINUTILS=binutils-2.20 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 LIBOPENSTM32=master +GMP=gmp-5.0.2 +MPFR=mpfr-3.0.1 +MPC=mpc-0.9 ############################################################################## # Flags section ############################################################################## +if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) +else + CPUS=1 +fi +PARALLEL=-j$((CPUS + 1)) +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" + GDBFLAGS= BINUTILFLAGS= -if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then +if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then GCCFLAGS= else # To default to the Cortex-M3: - GCCFLAGS="--with-arch=armv7-m --with-mode=thumb" + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" fi # Pull in the local configuration, if any @@ -87,7 +106,7 @@ fi export PATH="${PREFIX}/bin:${PATH}" -SUMMON_DIR=$(pwd) +SUMMON_DIR=${WORKDIR} SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps @@ -108,11 +127,24 @@ case "$(uname)" in ;; Darwin) echo "Found Darwin OS." - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" + + # darwin dependencies + DARWINDEPS="wget" + + echo "Installing dependencies ..." + if ! which brew > /dev/null; then + echo "Homebrew not installed." + else + brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true) + fi + + TAR=gnutar + + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" + ;; + CYGWIN*) + echo "Found CygWin that means Windows most likely." ;; *) echo "Found unknown OS. Aborting!" @@ -126,23 +158,23 @@ esac ############################################################################## # Fetch a versioned file from a URL -function fetch { +fetch() { if [ ! -e ${STAMPS}/$1.fetch ]; then log "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + wget -c $2 touch ${STAMPS}/$1.fetch fi } # Log a message out to the console -function log { +log() { echo "******************************************************************" echo "* $*" echo "******************************************************************" } # Unpack an archive -function unpack { +unpack() { log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a ARCHIVE=$(ls ${SOURCES}/$1.tar.*) @@ -157,20 +189,25 @@ function unpack { ;; *) echo "Unknown archive type of $1" - echo ${ARCHIVE} - exit 1 + echo "leaving the decision to tar" + TYPE= ;; esac ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* } # Install a build -function install { +install() { log $1 ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } - +if [ ! -d $SUMMON_DIR ]; then + mkdir -p ${SUMMON_DIR} + SUMMON_DIR_CREATED=1 +else + SUMMON_DIR_CREATED=0 +fi mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} @@ -179,6 +216,23 @@ fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +fetch ${GMP} ftp://ftp.gmplib.org/pub/${GMP}/${GMP}.tar.bz2 +fetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2 +fetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz + +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then @@ -254,9 +308,15 @@ fi if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then unpack ${GCC} boot + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -276,13 +336,15 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then unpack ${NEWLIB} cd build log "Configuring ${NEWLIB}" + # configuration options and flags partially + # from https://github.com/jsnyder/arm-eabi-toolchain ../${NEWLIB}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ @@ -291,9 +353,14 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls + --disable-newlib-supplied-syscalls \ + --disable-shared \ + --disable-nls \ + --disable-libgloss \ + --with-float=soft log "Building ${NEWLIB}" - make ${MAKEFLAGS} + NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs" + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}" install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" @@ -304,13 +371,19 @@ fi # Yes, you need to build gcc again! if [ ! -e ${STAMPS}/${GCC}.build ]; then unpack ${GCC} + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}" + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ - --enable-languages="c,c++" \ --with-newlib \ --disable-shared \ --with-gnu-as \ @@ -325,7 +398,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -347,6 +420,41 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS} @@ -398,3 +506,8 @@ if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then rm -rf libopenstm32-${LIBOPENSTM32} fi fi + +if [ ${SUMMON_DIR_CREATED} = 1 ]; then + log "Removing work directory" + rm -rf ${SUMMON_DIR} +fi